Performance

Temperature: Buna (Standard): -45oF ~ 225oF, -43oC ~ 107oC EPR (optional): -65oF ~ 300oF, -53oC ~ 148oC Viton (optional): -20oF ~ 250oF, -29oC ~ 121oC Element Collapse: 150 ∆P psi, 10 ∆P bar Media Efficiency: β5[c] > 1000 (3 micron absolute)

High Performance Separator Element Upgrade for Facet CS-59F Silicone Treated Cellulose Media Separator

HPQ280674 Hy-Pro Teflon Coated Screen Water Barrier + High Efficiency Glass Media Polishing Separator Upgrade

Separator Element Upgrade

Fluid Compatibility (No Media Breakdown) Compatible with synthetic and Petroleum based turbine oils, #2 Diesel, Heavy Diesel, and Specified Bio-Diesel fuels. Hy-Pro glass upgrade separators with Teflon coated hydrophobic water barrier sleeve are impervious to media breakdown from long term exposure to water or oil with high concentrations of dissolved, emulsified and free water. Antiquated separators that utilize silicone treated cellulose media are susceptible to a loss of water from oil separation efficiency and media migration (mush). Media breakdown can occur when treated cellulose is exposed to high concentrations of water or from long term exposure to water in oil. Interchange (See Interchange Guide for Elements not Listed) Facet Hy-Pro CS-59F HPQ280674 CS-59F x 2 HPQ280674L23 CS-59F x 3 HPQ280674L34 Fram Hy-Pro CC-K21 HPQ280674

Media G8 Glass media pleat pack downstream of Teflon coated screen water barrier sleeve features our latest graded density glass media for a final high efficiency filtration polishing pass that delivers lower ISO codes in addition to high efficiency water removal.

Water Removal (High Efficiency) The Teflon coated water barrier sleeve prevents suspended and emulsified water from leaving the coalesce vessel. The separator works in tandem with the coalesce element (stage 1 in the water removal process) which causes the small emulsified water droplets to coalesce together to form larger, suspended water droplets. The higher specific gravity of the water causes the larger suspended water droplets to fall to the bottom of the coalesce vessel forming a clear separation between water and the oil floating on top of the water where the water can be removed. Tested to ISO Quality Standards ISO 2941 Collapse and burst resistance ISO 2942 Fabrication and Integrity test ISO 2943 Material compatibility with fluids ISO 3724 Flow fatigue characteristics ISO 3968 Pressure drop vs. flow rate ISO 16889 Multi-pass performance testing

www.hyprofiltration.com Ph 317.849.3535

HY

-PR

O F

ILT

RA

TIO

N

Hy-Pro Upgrade

Impregnated Cellulose

Table 2 Code

omit Nitrile Buna (Standard)

V Fluorocarbon Viton (Non-standard)

E EPR (Non-standard)

Seal

USE SEPARATOR UPGRADES WITH COALESCE ELEMENT UPGRADES

Coalesce Element Glass Upgrades should be installed when upgrading antiquated separators that use silicone impregnated cellulose media. If the separator is made with cellulose it is very likely that the coalesce element that is being used in tandem with the separator is cellulose as well. Hy-Pro glass upgrade coalesce elements are manufactured with only synthetic coalesce media and non-woven support layers. Cellulose media coalesce elements are susceptible to a loss of water from oil separation efficiency and media migration (mush) as the cellulose fibers become saturated with water or experience periods of high water ingression. Media breakdown also occurs with cellulose coalesce elements when water is not drained from the coalesce vessel leaving the coalesce element soaking in straight water as the level of removed water rises. Glass media coalesce element upgrades features all synthetic materials and wire mesh supported pleats with inside to outside flow direction. Contact Us For Coalesce Element Upgrade Info

FILTER ELEMENT PART NUMBER GUIDE

FE-Series-Date

www.hyprofiltration.com

Table 1 Overall Length

Code

omit ~ 11.5”

L23* ~ 23.0”

L34* ~ 34.5”

HPQ280674 __ - __ Table 1 Table 2

* If separator elements are being stacked add the length code to the part number for one complete element. If two elements are stacked use HPQ280674L23. If three elements are stacked use HPQ280674L34.

Coalesce Element

Separator Element