solaris urbino pl - mega pack - go group virtual urbino pl - mega pack - originally moki mod v2,...

21
1 Solaris Urbino PL - Mega Pack Description…………………………………...2 News….……………………………………....3 Installation…………………………..………12 Manual of configuring versions and making new repaints…………….………………….13 Known bugs\FAQ\New bindings...……….19 Credits.……………………………………...20 Copyright……...…………………………....21

Upload: dangkhue

Post on 24-Apr-2018

1.223 views

Category:

Documents


43 download

TRANSCRIPT

1

Solaris Urbino PL - Mega

Pack

Description…………………………………...2

News….……………………………………....3

Installation…………………………..………12

Manual of configuring versions and making

new repaints…………….………………….13

Known bugs\FAQ\New bindings...……….19

Credits.……………………………………...20

Copyright……...…………………………....21

2

Description

Solaris Urbino PL - Mega Pack

- Originally Moki mod v2, because it is expand of Moki Mod

v1, but complexity of this version of mod and fact, that pack

doesn’t contain only Moki dashboard now forced me to

change the name of Mod.

Pack contain 83 playable versions of Solaris Urbino 10,

12, 15 and 18 buses. In addition there is 29 [setvar]’s

which adds details such as: Air conditioning, DRL’s, round

STOP buttons, hubcaps and much more.

3

News

Relative to Moki Mod v1 has been a lot of changes.

Inside of bus:

seats Ster 6MN

seats Ster 8

4

new pixel XTL (inner display)

new wind catchers (2 to choose via setvar one different for euro6)

Yellow floor around doors

round STOP and Individual door opening buttons

red warning light above doors

sunroofs (not changeable)

5

new air conditioner vents

Ticket validator (not changeable)

On driver’s work place:

Addons to Actia dashboard

For MOKI dashboard option of round door buttons

6

For MOKI dashboard option of manual retarder

dashboard ACTIA

dashboard FAP

dashboard MOKI

splited right mirror

option of additional mirror looking at corner of bus

option of big mirrors

7

New camera display (Not changeable)

Polish information stickers (not changeable)

Timetable at corner of dashboard (not changeable)

Outside of bus:

No air condition

8

new air conditioner

driver’s air conditioners konvekta, spheros or sutrak

Button for opening driver doors from outside

hatch and/or exhaust on roof

Led Pixel Displays

9

Magnetic Displays Pixel

DRL’s

Brushes in the wheel arches

10

doors Rawag

doors Bode 2011+

11

doors Ventura rebound-sliding doors

Also for Urbino 12, 15 and 18 there are Euro 6 and Euro 4 versions which has

different seats configuration, size of engine chamber and sounds.

New are also sounds of standard Euro 5 engine sound, ABS, indicators, horn,

brakes and doors.

All busses got brand new physics, now they tilt in the corners and Urbino 15 no

longer struggle to start driving.

Added Adblue and Webasto fuel refuelling with Actia Dashboard.

Added automatic busstops changing (only while having timetable set)

Multidisplay under speedometer has 7 display modes

(daily mileage 1 and 2 in km, Time, Temperature inside and outside, current fuel

consumption in l/h and average fuel consumption in l/100km calculated based on

daily mileage 1)

Light barrier sensor added (optional)

Auto reverse system added

12

Installation

Before Solaris Urbino PL - Mega Pack installing you must

delete Moki Mod v1. If you don’t, .bus files will cause

errors.

To install Solaris Urbino PL - Mega Pack you should move

all files from archive to main folder of Omsi 2.

Files in Templates folder helps you with making good

additional repaints for busses from this Pack.

13

Repaints instruction

Unfortunatelly old repaints won’t be fully compatible with

Solaris Urbino PL - Mega Pack. Seats texture had to be

changed so you have to add to .cti new entries.

Grouped folders for repaints following lenght of bus and

type (Non Euro6 and Euro6)

(New folders are following: repu10, repu12, repu12e6,

repu15, repu15e6, repu18, repu18e6 – you have to group

repaints manually otherwise they won’t be visible in game)

For repaint file (.cti) new entries are available:

[item]

(Repaint name)

repaint_siedzenia

body_wew.png

[item]

(Repaint name)

repaint_swiatla

02.png

[item]

(Repaint name)

repaint_klima

klimatyzator.jpg

[item]

(Repaint name)

repaint_kolpaki

CapRim.dds

14

[item]

(Repaint name)

repaint_sutrak

sutrak.png

[item]

(Repaint name)

repaint_drzwibodenowe

Tuer.tga

[item]

(Repaint name)

repaint_ster8

8MP+8MU.png

repaint_sutrak – repaint of air conditioner Carrier Sutrak

repaint_drzwibodenowe – repaint of handrails in Bode doors

repaint_siedzenia – changes texture of Ster 6 seats (material and rear of them)

repaint_swiatla – changes texture of lights, you can change lights to leds (for that, you

can use file added in texture folder)

repaint_klima – repaint of ”old” A/C and drivers A/C Konvekta

repaint_kolpaki – hubcaps repaint

repaint_ster8 – rear of seats Ster 8 repaint (material is this same as this in

repaint_siedzenia)

15

You can repaint A/C with colors of your transport company. Check this instruction:

In pack are added .psd files. When making repaint, please use it!

You aren’t allowed to make fictitious repaint of IV generation!

But besides that, are available (introduced before) [setvar] entries.

This entries you can add below every repaint in .cti repaint file.

Available are following [setvar] entries:

klima_stara – when enabled, will be old air conditioner on roof

klima_nowa - when enabled, will be new air conditioner on roof

WARNING! Cannot be klima_nowa and klima_stara enabled together!

(if you want no A/C on roof, then you should turn off both or delete both)

drl - when enabled, will be added day running lights on bumper(in Euro 6 default it is in

front fog lamp place)

komin - when enabled, will be hatch on roof above engine (not applicable with SU10

and Euro 6)

komin_wydech - when enabled, will be exhaust on roof

WARNING! When enabled, entry komin also need to be enabled! (not applicable with

Euro 6)

podloga_wcieta - when enabled, will be square floor instead of circular

przyciski_okragle - when enabled, will be round doors buttons (only MOKI dashboard)

reczny_retarder - when enabled, will be manual retarder (only MOKI dashboard)

alarm_wtrakcie - when enabled, will be warning sound when doors are closing.

alarm_przed - when enabled, will be warning sound before doors closing.

lusterko_podzielone - when enabled, will be splited right mirror

16

lusterko_dodatkowe - when enabled, will be additional mirror with view of the corner of

bus

przyciski_zf - when enabled, will be forced ZF’s gearbox buttons (also when Voith will

be chosen), when disabled, will be forced VOITH’s gearbox buttons (also when ZF will

be chosen)

When entry don’t exist in file, script will detect chosen gearbox and will use correct

buttons.

brak_kabiny - when enabled, will be small cabin. When disabled will be used

big/closed cabin. (not applicable with SU10)

kolpaki - when enabled, will be hubcaps on wheels

okragle_przyciski_stop - when enabled, STOP and manual door opening buttons

inside will be round (red and blue)

klima_kier_spheros - when enabled, will be drivers A/C Spheros

klima_kier_konvekta - when enabled, will be drivers A/C Konvekta

klima_kier_sutrak - when enabled, will be drivers A/C Sutrak

WARNING! Cannot be used more than one drivers A/C!

wyswietlacze_klapkowe - when enabled, will be magnetic displays instead of leds.

wiatrolapy_nowe - when enabled, will be used new wind catchers

alarm_przy_polowce - when enabled, will be door warning sound also used, when

open only one of first doors

brak_lampek_drzwi - when enabled, won’t be used red light above doors (default it

blinks when doors closing)

lusterka_duze - when enabled, will be big mirrors (don’t use with

lusterko_dodatkowe)

drzwi – controls, which doors should be used.

0 - Rawag (default) / 1 - Bode 2011+/ 2 - Ventura rebound-sliding (Ventura applicable

only with Su12 and Su18) (Ventura doors automatically enables photocell)

dodatki_actia - when enabled, will be GORBATIME clock and combustion counter

VDO EDM Eco appear with ACTIA dashboard

szczotki - when enabled, will be brush appear above wheels

fotokomorka - when enabled, will be used photocell (for info look to FAQ)

siedzienia - controls, which seats should be used. 0 - Ster6 (default) / 1 - Ster 8

Egzample [setvar] entries:

[setvar] brak_klimy 0 [setvar] drzwi 1

17

[setvar] klima_kier_sutrak 1 [setvar] klima_nowa 1 [setvar] drl 1 [setvar] komin 1 [setvar] komin_wydech 1 [setvar] podloga_wcieta 0 [setvar] przyciski_okragle 0 [setvar] alarm_wtrakcie 1 [setvar] alarm_przed 0 [setvar] lusterko_podzielone 1 [setvar] lusterko_dodatkowe 1 [setvar] przyciski_zf 1 [setvar] brak_kabiny 0 [setvar] kolpaki 0 [setvar] okragle_przyciski_stop 1 [setvar] klima_kier_spheros 0

18

[setvar] klima_kier_konvekta 1 [setvar] wyswietlacze_klapkowe 1 [setvar] reczny_retarder 1 [setvar] wiatrolapy_nowe 1 [setvar] alarm_przy_polowce 1 [setvar] brak_lampek_drzwi 0 [setvar] lusterka_duze 1 [setvar] dodatki_Actia 1 [setvar] szczotki 1 [setvar] siedzenia 0 [setvar] fotokomorka 1

Repaint without [setvar] entries will also work, like default version (all [setvar] to 0) You don’t have to use all [setvar]. If any of them won’t be in .cti file, script will use it like in 0 position.

19

Known bugs\FAQ\New

bindings (or that, what you think are bugs)

-To turn on beam lights you have to press twice L, to turn off we use shift+L

-To turn full beam lights permanently you have to hold F button

-Fog lights can be turned only with mouse and you have to pull up/down switch

-To insert key into ignition, press E, to start engine keep pressing E till it starts, to turn off engine

and pull out key keep pressing M

-Button for opening driver doors form outside need to be held till doors will open

-Urbino 15 can sometimes struggle to start moving

-Exhaust gases fly out from bottom even if we have chosen [setvar] with exhaust on roof

-Manual retarder binding: retarder_wiecej i retarder_mniej

-SU15 when placed on map can dive in the ground (just start electricity to fix it)

-With FAP and ACTIA dashboard one switch turn on all lights and the other one turn off one

which is closest to driver

-Yes, you can start driving with bus stop brake in Euro 5 and Euro 4

-Emergency door opening doesn’t work and won’t work

-You have to use brake to insert a gear otherwise gear won’t enter (also keep low rpm)

-On startup engine is on choke which will affect in waving rpm’s. Choke will turn off above 30

degree of coolant

-To change registration plate you have to paint it on 03 texture

-Time before closing doors can be changed in doors constfile in script_xx_moki folders

-Multidisplay mode can be changed with pressing button near that display or you can add

keyboard binding: licznik

-Second daily mileage start counting from first time choosing it (kinda bug)

-Kneeling sometimes can bug and won’t stand up automatically so you have to do it manually by

pressing kneeling button up

-Doors sometimes will bounce, it is Auto reverse system (in photo cell mode probability for

bounce or locking doors depends on passengers count)

-In photo cell mode doors will automatically close when no one will be entering or leaving bus

when individual door opening button is on. You can force doors to close when you hold button

for closing doors. Without individual door opening button after pressing door closing button

doors will check if no one is in their sight and will close (like 2 - 3 sec after pressing)

-In case of blocked photocell (doors had bounced more than 5 times) you have to force doors to

close with holding door closing button

20

Credits

Main Author: CraherPL

Co-author: Łapka – he made a lot of things, finished doors

and seats placing and made most of additions.

Base of this modification is Solaris Urbino 12 i 18 III

(BVG) (By alTerr) and Solaris Urbino 12/18 (By alTerr –

modification for doors + SU15, SU10)

Package contains following addons:

Pixel fonts for displays and .hof files for it by landart. Check here:

http://strefa-omsi.pl/Watek-OMSI-2-Czcionka-PIXEL-na-wyswietlacze-

zewnetrzne--10488 and http://strefa-omsi.pl/Watek-Pliki-hof-

Kr%C3%BCger-do-polskich-map--10491

Krueger+(+) by unbenamst

https://www.omsi-webdisk.de/index.php?page=Entry&entryID=149

Big/closed cabin: Aragok

ACTIA dashboard: NightHauler

Euro 4, Euro 5 i Euro 6 sounds: Kamil2177

Ticket punchers: Ogon

Moki dashboard, Ster 6 seats, sunroofs, RAWAG doors: gocek

Drivers A/C Konvekta i Spheros: Dominik335

A/C Sutrak: PiRo

Interior textures and other textures corrections: dsiek17

21

Hubcaps: Kamaz

Barrier separates first doors and moneybox: Ashton

Big mirrors: Vengeance 3D

Bode 2011+ doors: Man Lions City + Mainz Addon

GorbaTime clock and combustion counter VDO EDM Eco: pause1

Ster 8MP+8MU seats: Alek217

I would like to thank everyone who helped with this modification with testing

or good advices.

Richard Hammond – substance help and delivery some textures

Wikary, Pantograv – materials for Euro6

Copyright

Is forbidden to reupload the archive or using its elements without

agree.

Exception of krueger+(+) skrypt which is on CC BY-SA 4.0 licence.

I’m looking forward for modifications to my modification but, remember you

cannot reupload any part of original archive.

Solaris Urbino PL - Mega Pack v1.6 by CraherPL & Łapka

Translated by CraherPL & pause1