technical brochure eliminator liquid line filter driers ... · 2 dkrcc.pd.e00.b5.22 / 520h6946...

1DKRCC.PD.E00.B5.22 / 520H3529

MAKING MODERN LIVING POSSIBLE

Technical brochure

Eliminator Liquid Line Filter DriersDCL and DML

Features The CoreType DML

� 100 % 3Å Molecular Sieve core. � High drying capacity minimizing the risk of

acid formation (hydrolysis). � Recommended for use with HFC and HCFC

refrigerants. � Will not deplete oil additives.

Type DCL � 80 % 3Å Molecular Sieve with 20% activated

alumina. � Perfect core blend for systems that operate at

high condensing temperatures and require high drying capacity.

The Shell � UL approved for MWP up to 46 bar (667 psig) � Available with solder (copper) and flare

connections. � Corrosion resistant powder-painted finish.

Special coating for marine applications available upon request.

� Allows installation with any orientation provided the arrow is in the flow direction.

� Available in sizes from 3 to 75 cubic inches.

The Filter � 25 µm (0.001 in.) filter provides high retention

with minimal pressure drop. � Thermally stable up to 120 °C (250 °F)

All Eliminator driers have a solid core withbinding material held to an absolute minimum.

There are two types of Eliminator cores.Type DML driers have a core composition of 100% Molecular Sieve, while type DCL contain 80% Molecular Sieve with 20% activated alumina.

Eliminator type DML driers are designed for applications requiring the highest moisture capacity.

Eliminator type DCL driers are designed for applications requiring high moisture capacity and acid adsorption capacity.

Flare connection Solder connection (copper)

DKRCC.PD.E00.B5.22 / 520H6946 Danfoss A/S (AC-MCI sw) 2012-102

Eliminator Liquid Line Filter Driers, DCL and DML

Application Eliminator liquid line filter driers protectrefrigeration and air-conditioning systems frommoisture, acids, and solid particles.

With these contaminants eliminated, systems aresafer from harmful chemical reactions and fromabrasive impurities.

Temperature range – 40 to 70 °C (–40 to 160 °F)

Acid capacityFilter

Acidcapacity

[oz.]

DCL 03 0.02

DCL 05 0.03

DCL 08 0.05

DCL 16 0.11

DCL 30 0.23

DCL 41 0.31

DCL 60 0.45

DCL 75 0.63

FilterSolid core

surfaceSolid core

volumeFilter drier volume

(shell volume)Filter drier volume

(net. volume)

[in2] [in3] [fl. oz.] [fl. oz.]

DML/DCL 03 13 3 2.7 1.28

DML/DCL 05 15 4 4.0 1.72

DML/DCL 08 20 6 5.7 2.18

DML/DCL 16 34 14 12.0 4.11

DML/DCL 30 59 30 24.3 7.58

DML/DCL 41 79 42 32.7 9.66

DML/DCL 60 117 60 45.3 11.89

DML/DCL 75 158 83 61.3 15.23

Technical data

Surface and volume

SGN / SGI GBC DML / DCL

KP 61E

VR

Dan

foss

R64

-182

0.12

GBC

Approvals UL file no. SA 6398PED 97/23/EC - a3p3

DKRCC.PD.E00.B5.22 / 520H6946 Danfoss A/S (AC-MCI sw) 2012-10 3


Technical data and capacities

1) Drying capacity is based on following moisture content test standards before and after drying:

R134a: From 1050 ppm W to 50 ppm W. R404A, R507: From 1020 ppm W to 50 ppm W. R407C: From 1020 ppm W to 50 ppm W. R410A: From 1050 ppm W to 50 ppm W. R22: From 1050 ppm W to 60 ppm W in

accordance with ARI 710-2004.

2) Given in accordance with ARI 710-2004 for te = –15 °C (5 °F), tc = 30 °C (85 °F) and ∆p = 0.07 bar (1 psig).

R134a, R507, R404A, R22, R407C, R410ADrying and liquid capacity - Type DML

DML

Type

Drying capacity [lbs refrigerant] 1) Liquid capacity [TR] 2) Max.WorkingPressure

PS[psig]

R134a R404A R507 R22 R407C R410A R134a

R404A

R507

R22

R407C

R410A

75°F 125°F 75°F 125°F 75°F 125°F 75°F 125°F 75°F 125°F 75°F 125°F

DML 032/032sDML 032.5sDML 033/033sDML 034s

10.9 10.3 11.8 11.2 12.0 11.1 11.1 10.3 11.0 10.1 10.0 9.2

2.203.164.197.96

1.682.353.306.67

1.642.303.236.53

2.353.344.558.91

2.313.274.508.89

2.373.304.669.48

667667667667

DML 052/052sDML 052.5sDML 053/053sDML 054sDML 055s

17.4 16.5 18.7 17.8 19.1 17.6 17.6 16.3 17.5 16.1 15.9 14.6

2.533.164.208.29

11.70

1.892.363.296.899.65

1.852.313.216.759.45

2.683.344.559.25

13.00

2.633.284.499.21

12.94

2.663.324.639.79

13.70

667667667667667

DML 082/082sDML 082.5sDML 083/083sDML 084/084sDML 085/085s

27.9 26.3 29.9 28.4 30.5 28.2 28.2 26.1 27.9 25.8 25.4 23.4

2.553.464.629.39

14.14

1.842.643.677.17

11.72

1.802.583.597.01

11.48

2.653.695.04

10.0415.75

2.593.634.989.87

15.69

2.583.715.19

10.0916.65

667667667667667

DML 162/162sDML 162.5sDML 163/163sDML 164/164sDML 165/165sDML 166/166sDML 167s

61.2 57.8 65.7 62.3 66.9 61.8 61.9 57.3 61.3 56.6 55.8 51.4

2.553.525.46

10.6014.3614.6413.85

1.842.503.817.94

12.1112.3613.02

1.802.443.717.75

11.8712.1212.81

2.653.635.58

11.2216.1316.4616.37

2.583.535.41

11.0116.1116.4416.63

2.573.495.30

11.1417.2417.6118.83

667667667667667507507

DML 303/303sDML 304/304sDML 305/305sDML 306/306sDML 307sDML 309s

127.2 120.2 136.7 129.6 139.2 128.6 128.8 119.1 127.5 117.8 116.0 106.9

5.2610.6014.7413.8020.5726.81

3.618.36

12.2612.9517.7823.02

3.528.18

12.0112.7317.4322.57

5.3311.5216.4516.2923.3830.38

5.1611.3916.3916.5423.4430.42

5.0111.8117.4218.7125.3932.85

667667667507507435

DML 413DML 414/414sDML 415/415sDML 417sDML 419s

171.6 162.2 184.5 174.9 187.8 173.5 173.8 160.7 172.0 158.9 156.6 144.3

6.1710.8118.1621.3530.80

4.258.80

14.0418.5425.35

4.148.62

13.7218.1824.82

6.2611.9419.5324.3234.19

6.0611.8619.2524.4034.01

5.9012.4819.7726.5035.97

667667667507435

DML 604sDML 607sDML 609s

257.6 243.5 276.9 262.5 281.9 260.4 260.9 241.2 258.2 238.6 235.0 216.58.75

21.8218.79

8.4622.3222.13

8.3222.0222.01

10.4726.7324.17

10.6827.5025.41

12.2832.7433.68

667507435

DML 757sDML 759s 352.3 333.0 378.7 359.0 385.5 356.1 356.8 329.9 353.0 326.2 321.3 296.1 27.18

26.1223.6127.52

23.1527.19

30.9732.36

31.0733.45

33.7440.62

507435

R134a, R507, R404A, R22, R407C, R410ADrying and liquid capacity - Type DCL

DCL

Type

Drying capacity [lbs refrigerant] 1) Liquid capacity [TR] 2) Max.WorkingPressure

PS[psig]

R134a R404A R507 R22 R407C R410A R134a

R404A

R507

R22

R407C

R410A

75°F 125°F 75°F 125°F 75°F 125°F 75°F 125°F 75°F 125°F 75°F 125°F

DCL 032/032sDCL 032.5sDCL 033/033s

8.5 8.0 9.1 8.7 9.3 8.6 8.6 8.0 8.5 7.9 7.8 7.22.203.164.19

1.682.353.30

1.642.303.23

2.353.344.55

2.313.274.50

2.373.304.66

667667667

DCL 052/052sDCL 052.5sDCL 053/053s

13.6 12.8 14.6 13.8 14.9 13.7 13.8 12.7 13.6 12.6 12.4 11.42.533.164.20

1.892.363.29

1.852.313.21

2.683.344.55

2.633.284.49

2.663.324.63

667667667

DCL 082/082sDCL 082.5sDCL 083/083sDCL 084/084s

21.7 20.5 23.3 22.1 23.8 21.9 22.0 20.3 21.8 20.1 19.8 18.2

2.553.464.629.39

1.842.643.677.17

1.802.583.597.01

2.653.695.04

10.04

2.593.634.989.87

2.583.715.19

10.09

667667667667

DCL 162/162sDCL 162.5sDCL 163/163sDCL 164/164sDCL 165/165sDCL 166/166sDCL 167s

47.7 45.1 51.3 48.6 52.2 48.2 48.3 44.7 47.8 44.2 43.5 40.1

2.553.525.46

10.6014.3614.6413.85

1.842.503.817.94

12.1112.3613.02

1.802.443.717.75

11.8712.1212.81

2.653.635.58

11.2216.1316.4616.37

2.583.535.41

11.0116.1116.4416.63

2.573.495.30

11.1417.2417.6118.83

667667667667667507507

DCL 303/303sDCL 304/304sDCL 305/305sDCL 306/306sDCL 307sDCL 309s

100.5 95.0 108.0 102.4 109.9 101.6 101.8 94.1 100.7 93.0 91.6 84.4

5.2610.6014.7413.8020.5726.81

3.618.36

12.2612.9517.7823.02

3.528.18

12.0112.7317.4322.57

5.3311.5216.4516.2923.3830.38

5.1611.3916.3916.5423.4430.42

5.0111.8117.4218.7125.3932.85

667667667507507435

DCL 413DCL 414/414sDCL 415/415sDCL 417sDCL 419s

139.5 131.9 150.0 142.2 152.7 141.0 141.3 130.7 139.8 129.2 127.3 117.3

6.1710.8118.1621.3530.80

4.258.80

14.0418.5425.35

4.148.62

13.7218.1824.82

6.2611.9419.5324.3234.19

6.0611.8619.2524.4034.01

5.9012.4819.7726.5035.97

667667667507435

DCL 604sDCL 607sDCL 609s

200.9 189.9 216.0 204.8 219.9 203.1 203.5 188.2 201.4 186.1 183.3 168.98.75

21.8218.79

8.4622.3222.13

8.3222.0222.01

10.4726.7324.17

10.6827.5025.41

12.2832.7433.68

667507435

DCL 757sDCL 759s 279.1 263.8 300.0 284.4 305.4 282.1 282.7 261.3 279.7 258.4 254.5 234.5 27.18

26.1223.6127.52

23.1527.19

30.9732.36

31.0733.45

33.7440.62

507435

1) Drying capacity is based on following moisture content test

standards before and after drying: R134a: From 1050 ppm W to 50 ppm W. R404A, R507: From 1020 ppm W to 50 ppm W. R407C: From 1020 ppm W to 50 ppm W. R410A: From 1050 ppm W to 50 ppm W. R22: From 1050 ppm W to 60 ppm W in

accordance with ARI 710-2004.

2) Given in accordance with ARI 710-2004 for te = –15 °C (5 °F), tc = 30 °C (85 °F) and ∆p = 0.07 bar (1 psig).



Ordering

TypeConn. Multipack

Industrialpack/ for OEM only

in. mm Code no. Qty. Code no. Qty.

DCL 032DCL 032DCL 033DCL 033

1/41/43/83/8

66

1010

023Z5000*023Z5075023Z5001*023Z5089

32 28

DCL 052DCL 053

1/43/8

610

023Z5002023Z5003

24023Z8002023Z8003

16

DCL 082DCL 083DCL 084

1/43/81/2

61012

023Z5004023Z5005023Z5006

24023Z8004023Z8005023Z8006

16

DCL 162DCL 163DCL 164DCL 165DCL 166

1/43/81/25/83/4

610121619

023Z5007023Z5008023Z5009023Z5010023Z5011

12

023Z8007023Z8008023Z8009023Z8010

12

DCL 303DCL 304DCL 305DCL 306

3/81/25/83/4

10121619

023Z0012023Z0013023Z0014023Z0156

8023Z3013023Z3014023Z3156

8

DCL 413DCL 414DCL 415

3/81/25/8

101216

023Z0101023Z0102023Z0103

8 6

* Wire mesh in filter drier outlet

Solder (copper) DCLType Conn. Multipack Industrialpack

for OEM onlyConn. Multipack Industrialpack

for OEM only

in. Code no. Qty. Code no. Qty. mm Code no. Qty. Code no. Qty.

DCL 032sDCL 032.5sDCL 033s

1/4

5/16

3/8

023Z5013*023Z5014023Z5015

32023Z8013*

2868

10023Z5014023Z5016

32 28

DCL 052sDCL 052.5sDCL 053s

1/4

5/16

3/8

023Z5018

023Z501924 16

68

10 023Z502024 16

DCL 082sDCL 082.5sDCL 083sDCL 084s

1/4

5/16

3/8

1/2

023Z5022

023Z5023023Z5026

24023Z8023023Z8026

16

68

1012

023Z5024023Z5025

24 16

DCL 162sDCL 163sDCL 164sDCL 165sDCL 166sDCL 167s

1/4

3/8

1/2

5/8

3/4

7/8

023Z5028023Z5029023Z5032023Z5033023Z5070023Z5034

12023Z8032

12

61012

023Z5027023Z5030023Z5031

12023Z8030

12

DCL 303sDCL 304sDCL 305sDCL 306sDCL 307sDCL 309s

3/8

1/2

5/8

3/4

7/8

11/8

023Z0030023Z0031023Z0032023Z0033023Z0034023Z0035

8023Z3032

8

101216182228

023Z0032023Z0216023Z0034

8023Z3032

8

DCL 414sDCL 415sDCL 417sDCL 419s

1/2

5/8

7/8

11/8

023Z0104023Z0105023Z0106023Z0107

8 6

12162228

023Z0105023Z0106

8 6

DCL 604sDCL 607sDCL 609s

1/2

7/8

11/8

023Z0036023Z0037

12 ---122228

023Z0036 12 ---

DCL 757sDCL 759s

7/8

11/8

023Z0115023Z0116

12 42228

023Z011512 4


Flare DCL



Solder (copper) DMLType Conn. Multipack Industrialpack

for OEM onlyConn. Multipack Industrialpack

for OEM only

in. Code no. Qty. Code no. Qty. mm Code no. Qty. Code no. Qty.

DML 032sDML 032.5sDML 033sDML 034s

1/4

5/16

3/8

1/2

023Z5048*023Z5049023Z5050023Z5121

32

023Z8048*

28

68

1012

023Z5047*023Z5049023Z5051023Z5123

32 28

DML 052sDML 052.5sDML 053sDML 054sDML 055s

1/4

5/16

3/8

1/2

5/8

023Z5053

023Z5054023Z5101023Z5100

24 023Z8054 16

68

101216

023Z5052023Z5115023Z5055023Z5099023Z5100

24 16

DML 082sDML 082.5sDML 083sDML 084sDML 085s

1/4

5/16

3/8

1/2

5/8

023Z5057023Z5117023Z5058023Z5061023Z5072

24 16

68

101216

023Z5056023Z5117023Z5059023Z5060023Z5072

24 16

DML 162sDML 162.5sDML 163sDML 164sDML 165sDML 166sDML 167s

1/4

5/16

3/8

1/2

5/8

3/4

7/8

023Z5063

023Z5064023Z5067023Z5068023Z5071023Z5069

12023Z8134023Z8067023Z8068

12

68

1012161922

023Z5062023Z5119023Z5065023Z5066023Z5068023Z5071023Z5069

12023Z8068

12

DML 303sDML 304sDML 305sDML 306sDML 307sDML 309s

3/8

1/2

5/8

3/4

7/8

11/8

023Z0067023Z0068023Z0069023Z0070023Z0071023Z0072

8023Z3069

023Z3071

8

101216192228

023Z0197023Z0199023Z0069023Z0070023Z0071023Z0201

8023Z3069

023Z3071

8

DML 414sDML 415sDML 417sDML 419s

1/2

5/8

7/8

11/8

023Z0111023Z0112023Z0113023Z0114

8

023Z3114

6

12162228

023Z0228023Z0112023Z0113023Z0203

8 6

DML 604sDML 607sDML 609s

1/2

7/8

11/8

023Z0073023Z0074

12 ---122228

023Z0229023Z0073023Z0205

12 ---

DML 757sDML 759s

7/8

11/8

023Z0117023Z0118

12 42228

023Z0117023Z0207

12 4

Ordering (cont.)Flare DML

TypeConn. Multipack

Industrialpackfor OEM only

in. mm Code no. Qty. Code no. Qty.DML 032DML 033DML 033

1/43/83/8

61010

023Z5035*023Z5036*023Z5090

32023Z8035*023Z8036* 28

DML 052DML 053

1/43/8

610

023Z5037023Z5038

24023Z8037023Z8038

16

DML 082DML 083DML 084DML 085

1/43/81/25/8

6101216

023Z5039023Z5040023Z5041023Z5073

24

023Z8039023Z8040023Z8041

16

DML 162DML 163DML 164DML 165DML 166

1/43/81/25/83/4

610121619

023Z5042023Z5043023Z5044023Z5045023Z5046

12

023Z8042023Z8043023Z8044023Z8045

12

DML 303DML 304DML 305DML 306

3/81/25/83/4

10121619

023Z0049023Z0050023Z0051023Z0193

8

023Z3049023Z3050023Z3051023Z3193

8

DML 413DML 414DML 415

3/81/25/8

101216

023Z0108023Z0109023Z0110

8023Z3108023Z3109023Z3110

6





Identification Type codes

Example for type codes

Selection Type selection is made considering the application1) DCL filter driers contain activated

alumina, which is a polar material used for acid adsorption. Many oil additives are also polar substances and can be adsorbed by the activated alumina, rendering them useless, and reducing the drier’s acid capacity, though this is not harmful to the system.

Filter drier D

Solid core CM

80 / 20% composite core100 % Molecular Sieve core

Application L Liquid line

Size (volume) 0305081630416075

3 in3

5 in3

8 in3

16 in3

30 in3

41 in3

60 in3

75 in3

Connection (filter connectionin 1/8 of an inch increments)

22.5

345679

1/4 in. / 6 mm5/16 in. / 8 mm3/8 in. / 10 mm1/2 in. / 12 mm5/8 in. / 16 mm3/4 in. / 18 (19) mm7/8 in. / 22 mm11/8 in. / 28 mm

Connection type (blank)s

Flare connectionSolder connection

DCL DML

RefrigerantHFC Recommended Recommended

HCFC Recommended Recommended

Oil

Mineral or AB Recommended Recommended

POE or PAG, pure Recommended Recommended

POE or PAG, with additives Not recommended 1) Recommended

D C L 05 3 s

Select the appropriate type (DML or DCL) based on refrigerant and oil type. Then select the drier size based on the adsorption and liquid capacity required.

a. Amount of charge: 55 lbs R134a at tL = 75°F To dry 55 lbs R134a at 75°F from 1050 to 60 ppm moisture, a DML 16 is necessary.

b. Cooling capacity: Qe = 5.7 TRTo obtain a mass flow corresponding to 5.7 TR cooling capacity with a DML 16 filter drier, a

3/8 inch connection must be chosen.Larger connections can be chosen in accordance with the liquid line dimension.

c. ResultDML 163 or DML 163s can be used.

If the initial moisture content is very small or a planned change of the filter drier is considered, a smaller filter drier size can be chosen.

Selection example

Type

Drying capacity [lbs refrigerant] 1) Liquid capacity [tons] 2) Max.WorkingPressure

PS[psig]

R134a R404AR507

R22, R407CR410A R134a R404A

R507R22

R407CR410A75°F 125°F 75°F 125°F 75°F 125°F

DML 032/032sDML 032.5sDML 033/033sDML 034s

12.112.112.112.1

11.011.011.011.0

16.516.516.516.5

9.99.99.99.9

9.99.99.99.9

8.88.88.88.8

2.02.64.96.9

1.42.03.74.9

2.02.65.47.4

667667667667

DML 162/162sDML 162.5sDML 163/163sDML 164/164sDML 165/165sDML 166/166sDML 167s

59.559.559.559.559.559.559.5

56.256.256.256.256.256.256.2

95.995.995.995.995.995.995.9

52.952.952.952.952.952.952.9

59.559.559.559.559.559.559.5

50.750.750.750.750.750.750.7

2.02.66.38.6

12.312.612.6

1.42.34.66.38.68.88.8

2.33.16.99.4

13.413.713.7

667667667667667507507



Dan

foss

23Z2

2.10

.13

Design and function

1. Inlet2. Spring3. Solid core4. Polyester mat5. Perforated plate6. Seal cap, flare connection7. Seal cap, solder connection

DML / DCL 03

DML / DCL 08, 16 DML / DCL 30, 41

DML / DCL 60, 75

The relatively large diameter of the filter drier means that the liquid flow velocity is suitably low and the pressure drop minimal.

Powder formation is eliminated because the solid core grains are bonded and cannot move against each other.

DML / DCL 05

Dimensions and weights Flare connections

Type A A1 A2 L D1 D2 Weight

DCL/DML 032 in. 2.60 0.63 1.97 4.33 1.81 1.69 0.38 lbs

DCL/DML 033 in. 2.60 0.63 1.97 4.84 1.81 1.69 0.45 lbs



Dimensions and weights(cont.)

Flare connections


DCL/DML 052 in. 2.95 0.96 1.99 4.69 2.28 2.13 0.54 lbs

DCL/DML 053 in. 2.95 0.96 1.99 5.20 2.28 2.13 0.61 lbs


DCL/DML 082 in. 3.98 1.99 1.99 5.71 2.28 2.13 0.69 lbs

DCL/DML 083 in. 3.98 1.99 1.99 6.22 2.28 2.13 0.76 lbs

DCL/DML 084 in. 3.98 1.99 1.99 6.54 2.28 2.13 0.84 lbs

DML 085 in. 3.98 1.99 1.99 6.89 2.28 2.13 0.94 lbs

DCL/DML 162 in. 4.33 2.17 2.17 6.06 3.15 2.99 1.43 lbs

DCL/DML 163 in. 4.33 2.17 2.17 6.57 3.15 2.99 1.47 lbs

DCL/DML 164 in. 4.33 2.17 2.17 6.89 3.15 2.99 1.52 lbs

DCL/DML 165 in. 4.33 2.17 2.17 7.24 3.15 2.99 1.56 lbs

DCL/DML 166 in. 4.33 2.17 2.17 7.17 3.15 2.99 1.61 lbs


DCL/DML 303 in. 7.32 - - 9.57 3.15 2.99 2.59 lbs

DCL/DML 304 in. 7.32 - - 9.88 3.15 2.99 2.96 lbs

DCL/DML 305 in. 7.32 - - 10.24 3.15 2.99 3.26 lbs

DCL/DML 306 in. 7.32 - - 10.16 3.15 2.99 3.33 lbs

DCL/DML 413 in. 7.36 - - 9.61 3.66 3.50 3.95 lbs

DCL/DML 414 in. 7.36 - - 9.92 3.66 3.50 4.04 lbs

DCL/DML 415 in. 7.36 - - 10.28 3.66 3.50 4.06 lbs



Dimensions and weights(cont.)

Solder connections

Type A A1 A2 B L D1 D2 Weight

DCL/DML 032s in. 2.60 0.63 1.97 3.23 3.86 1.81 1.69 0.34 lbs

DCL/DML 032.5s in. 2.60 0.63 1.97 3.31 4.02 1.81 1.69 0.37 lbs

DCL/DML 033s in. 2.60 0.63 1.97 3.35 4.09 1.81 1.69 0.36 lbs

DCL/DML 034s in. 2.60 0.63 1.97 3.43 4.25 1.81 1.69 0.37 lbs


DCL/DML 052s in. 2.95 0.96 1.99 3.58 4.21 2.28 2.13 0.49 lbs

DCL/DML 052.5s in. 2.95 0.96 1.99 3.66 4.37 2.28 2.13 0.52 lbs

DCL/DML 053s in. 2.95 0.96 1.99 3.70 4.45 2.28 2.13 0.50 lbs

DML 054s in. 2.95 0.96 1.99 3.78 4.61 2.28 2.13 0.52 lbs

DML 055s in. 2.95 0.96 1.99 3.90 4.84 2.28 2.13 0.53 lbs


DCL/DML 082s in. 3.98 1.99 1.99 4.61 5.24 2.28 2.13 0.64 lbs

DCL/DML 082.5s in. 3.98 1.99 1.99 4.69 5.39 2.28 2.13 0.67 lbs

DCL/DML 083s in. 3.98 1.99 1.99 4.72 5.47 2.28 2.13 0.65 lbs

DCL/DML 084s in. 3.98 1.99 1.99 4.80 5.63 2.28 2.13 0.71 lbs

DML 085s in. 3.98 1.99 1.99 4.92 5.87 2.28 2.13 0.73 lbs

DCL/DML 162s in. 4.33 2.17 2.17 4.96 5.59 3.15 2.99 1.36 lbs

DCL/DML 162.5s in. 4.33 2.17 2.17 5.04 5.75 3.15 2.99 1.39 lbs

DCL/DML 163s in. 4.33 2.17 2.17 5.08 5.83 3.15 2.99 1.38 lbs

DCL/DML 164s in. 4.33 2.17 2.17 5.16 5.98 3.15 2.99 1.41 lbs

DCL/DML 165s in. 4.33 2.17 2.17 5.28 6.22 3.15 2.99 1.42 lbs

DCL/DML 166s in. 4.33 2.17 2.17 5.51 6.69 3.15 2.99 1.45 lbs

DCL/DML 167s in. 4.33 2.17 2.17 5.35 6.77 3.15 2.99 1.47 lbs


10 Danfoss A/S (AC-MCI sw) 2012-10DKRCC.PD.E00.B5.22 / 520H6946

Solder connectionsDimensions and weights(cont.)


DCL/DML 303s in. 7.32 - - 8.07 8.82 3.15 2.99 2.86 lbs

DCL/DML 304s in. 7.32 - - 8.15 8.98 3.15 2.99 2.91 lbs

DCL/DML 305s in. 7.32 - - 8.27 9.21 3.15 2.99 2.92 lbs

DCL/DML 306s in. 7.32 - - 8.50 9.69 3.15 2.99 2.93 lbs

DCL/DML 307s in. 7.32 - - 8.35 9.76 3.15 2.99 2.96 lbs

DCL/DML 309s in. 7.32 - - 8.15 9.80 3.15 2.99 2.98 lbs

DCL/DML 414s in. 7.36 - - 8.19 9.02 3.66 3.50 3.92 lbs

DCL/DML 415s in. 7.36 - - 8.31 9.25 3.66 3.50 3.94 lbs

DCL/DML 417s in. 7.36 - - 8.39 9.80 3.66 3.50 4.01 lbs

DCL/DML 419s in. 7.36 - - 8.19 9.84 3.66 3.50 4.03 lbs

DCL/DML 604s in. 13.27 - - 14.09 14.92 3.15 2.99 4.94 lbs

DCL/DML 607s in. 13.27 - - 14.29 14.71 3.15 2.99 4.98 lbs

DCL/DML 609s in. 13.27 - - 14.09 14.75 3.15 2.99 5.03 lbs

DCL/DML 757s in. 13.31 - - 14.33 15.75 3.66 3.50 6.98 lbs

DCL/DML 759s in. 13.31 - - 14.13 15.79 3.66 3.50 7.00 lbs

(lbs of refrigerant × (Initial PPM of water - Final PPM of water))Drops of water = 110

Conversions

See ARI standard 710-2004 for recommended initial and final PPM values for different refrigerants.

technical brochure eliminator liquid line filter driers ... · 2 dkrcc.pd.e00.b5.22 / 520h6946...

Documents