versatile ubond ap+

Upload: tripan

Post on 09-Apr-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/8/2019 Versatile Ubond AP+

    1/6

    UBOND AP + [Gloss & Matt Variants] ONE PRODUCT VERSATILE APPLICATIONSCAN BE USED FOR:

    1. Paver Blocks and Wall Cladding Gloss Coat Reflective Paver Blocks2. Natural Stones and Tiles Stain/ Water/ Dirt/ Mildew Resistant3. Sealing concrete from moisture and waterWater/ Mildew Resistant4. For Interior Decorative painted areas Paan/ Gutka/ Stain Resistant5. For Plywood, Timber, Wood - Stain/ Water/ Dirt/ Rot/ Mildew Resistant6. Leather Dyeing and Finished Leather Gloss/ Matt Finish, Stain/ Water Proofing

    Marble Stone Concrete Surfaces, Walls, Facades:

    Moss/ Mildewproofing/Water Proofing & Stain Proofing Exterior Concrete Cement Boards/ Particle Boards/ MDF Boards/ Asbestos Cement Sheets

    General Properties of UBOND AP+

    MPORTANT PROPERTY: As compared to other water based system UBOND AP+ - Does not discolour or

    milky soon after drying approx. 4 mins. To 20 mins. Drying Time

    Extremely good durability / colour retention / gloss retention.Extremely low VOC.Good anti-graffiti properties.Resistance to dirt pickup.

    Good overall chemical resistance.Cost benefits in labour utilisation, coating film builds whilst maintaining excellent corrosion resistance.Excellent abrasion resistance.Low temperature cure / drying attributes.

    UBOND AP+ does not block the pores and hence does not affect the breathability of concrete. The pure aliphatic acryla

    op coat provides high resistance to carbon dioxide, water and also ensures stability even under long term exposure to UV

    ays. This top coat has also self cleaning properties which enable the coating to look clean and neat even after years of

    xposure.

    UBOND AP+ consisting of silane/siloxane primer and pure aliphatic in combination protects the concrete surfaces f

    arbon dioxide, sulphur dioxide, oxygen, water, chlorides and acid gases while allowing water vapours from within to

    out.

    NON STAINING

  • 8/8/2019 Versatile Ubond AP+

    2/6

    DURABLEnot suitable for repairing leakages all by it self, however, in conjunction with grey/ white cement andilica flour/ quartz sand/ rice husk ash/ fumed silica/ microsilica can be used to seal off cracks, crevices, and provide a w

    proof, water resistant seal to concrete.

    UBOND AP+ application as antigraffiti coating is for Paan/ Gutka Stains on walls

    2 top coats on painted walls render the walls washable and the stains can be remove

    Wall Tiles, Wall MDF Decorative Panels, Stones - stain resistant, water resistant, breathable, clear coat. Can

    be used with pigment powders, stainers, metallic powders to give a variety of shades and effects.

    Stain Resistant, water repellent, hard wearing, U.V. resistant Gloss Coating for all porous substrates

  • 8/8/2019 Versatile Ubond AP+

    3/6

    Painted/ Unpainted Structures - as a top coat - after painting.Cheaper varieties of exterior paints can be used - and UBOND AP+ may be used as a clear top coat - in two coats.

    Can be used as water, stain repellent - anti graffiti coating, to prolong the life of the decorative paint.

    Waterproofing over China Mosaic, Inlaid Decorative Stone MosaicSurface Preparation: Cleanurface with 1 part HCl & 2 Parts water Rinse with 1 part Sod. Silicate & 2 parts water Rinse well with clean water

    DRY well & apply 2 coats undiluted UBOND AP+ at intervals of min 6 hrs. between coats

  • 8/8/2019 Versatile Ubond AP+

    4/6

  • 8/8/2019 Versatile Ubond AP+

    5/6

    UBOND AP+ on Leather as Top Coat or during Crusting as well as Finishing.

    Paver Blocks and Wall Cladding Gloss Coat - stain resistant, water resistant, breathable, clear coatCan also be used with pigment powders, stainers, metallic powders to give a variety of shades and effects.

    Gloss & Matt Oil/ Stain/ Water/ Rot/ Mildew Resistant UBOND AP+ for WOOD

  • 8/8/2019 Versatile Ubond AP+

    6/6

    TESTED ON THE FOLLOWING FOR CHEMICAL RESISTANCE:. Resistance to HCl acidic water [dipped condition] - pH 2 - 21 days - passes - no loss of gloss or de bonding of coat.

    2. Resistance to Sour Lime - 24 hrs - on surface - passes

    . Resistance to 30% commercial HCl - 24 hrs. - passes4. Resistance to Inks, Grease, Gravy - 24 hrs. - passes5. Resistance to Brake Fluid/ D.E.G. - 24 hrs. - passesst Coat - 80 sqft. - 300 sq.ft. - depending on substrate

    2nd Coat - 200 - 400 sq.ft.