welding software :samweld presentation
DESCRIPTION
Welding softwares for "Cooling Rate Estimator" & "Preheat Temperature Estimator as per ASME Sec. IX"TRANSCRIPT
SACHIN A. MORE
M.Tech. Welding Engineer
National Institute of Technology, Trichy
Presented by:Developer : Sachin A. More
Welding Cooling Rate Estimator:
*Education Purpose only
Welding Cooling Rate Estimator:
Power Input
Material Properties
Welding Process Parameter
Result : Required Cooling Rate
Welding Cooling Rate Estimator:
Click “Check”
Say “OK”
Click “Calculate”
Presented by:Developer : Sachin A. More
AWS D1.1 Preheat Temperature Estimator: :
*Education Purpose only
AWS D1.1 Preheat Temperature Estimator:
This Software is made to predict Preheat Temperature as per AWS D1.1 Steel Fabrication Codes and Standers.
It implement most commonly used method “Hydrogen Control Method ” to find Preheat Temperature. It is very simplified for industrial use, quick
results are obtained without delay.
Select Material from given list.
Click “Check” Selected Metal Composition will be shown
Select Hydrogen Level
Select Restrain Level.
Click “Check”
“GO”
