2111testing single

21
Assessment Manager: PL Page 1 of 21 Schedule of Accreditation issued by United Kingdom Accreditation Service 21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK 2111 Accredited to ISO/IEC 17025:2005 Intertek Test Hizmetleri A.S. Issue No: 024 Issue date: 22 January 2013 Merkez Mahallesi Sanayi cad. No 23 Altindag Plaza Yenibosna-34197 Istanbul Turkey Contact: Ozan Yaman Tel: + (90) 212 496 4646 Fax: + (90) 212 452 8055 E-Mail: [email protected] Website: www.intertek-cg-tur.com Testing performed at the above address only DETAIL OF ACCREDITATION Materials/Products tested Type of test/Properties measured/Range of measurement Standard specifications/ Equipment/Techniques used TEXTILES Colour Fastness to: Artificial light (xenon arc) BS EN ISO 105-B02:1999 EN ISO 105-B02:1999 ISO 105 B02:1994 AATCC 16:2004 TS 1008 EN ISO 105 B02:2001 Light wetted with artificial perspiration BS EN ISO 105-B07:2009 Artificial weathering (Xenon arc fading lamp test) BS EN ISO 105-B04:1997 Washing BS EN 20105:C01:1993 ISO 105:C01:1989 BS EN 20105:C02:1993 ISO 105:C02:1989 BS EN 20105:C03:1993 ISO 105:C03:1989 BS EN 20105:C04:1993 ISO 105:C04:1989 BS EN 20105:C05:1993 ISO 105:C05:1989 ISO 105:C10:2006 BS EN ISO 105:C10:2007 EN ISO 105 C10:2007 TS EN ISO 105 C10:2011 BS EN ISO 105 C08:2002 BS EN ISO 105 C08:2010 EN ISO 105 C08:2010 ISO 105 C08:2010 BS EN ISO 105 C09:2003 EN ISO 105 C09:2003 ISO 105 C09:2001

Upload: durgeshtripathee

Post on 20-Oct-2015

191 views

Category:

Documents


6 download

DESCRIPTION

textile testing price intertek lab

TRANSCRIPT

  • Assessment Manager: PL Page 1 of 21

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK

    2111

    Accredited to ISO/IEC 17025:2005

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Merkez Mahallesi Sanayi cad. No 23

    Altindag Plaza

    Yenibosna-34197

    Istanbul

    Turkey

    Contact: Ozan Yaman

    Tel: + (90) 212 496 4646

    Fax: + (90) 212 452 8055

    E-Mail: [email protected]

    Website: www.intertek-cg-tur.com

    Testing performed at the above address only

    DETAIL OF ACCREDITATION

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES Colour Fastness to: Artificial light (xenon arc) BS EN ISO 105-B02:1999

    EN ISO 105-B02:1999 ISO 105 B02:1994 AATCC 16:2004 TS 1008 EN ISO 105 B02:2001

    Light wetted with artificial

    perspiration BS EN ISO 105-B07:2009

    Artificial weathering (Xenon arc

    fading lamp test) BS EN ISO 105-B04:1997

    Washing BS EN 20105:C01:1993 ISO 105:C01:1989 BS EN 20105:C02:1993 ISO 105:C02:1989 BS EN 20105:C03:1993 ISO 105:C03:1989 BS EN 20105:C04:1993 ISO 105:C04:1989 BS EN 20105:C05:1993 ISO 105:C05:1989 ISO 105:C10:2006 BS EN ISO 105:C10:2007 EN ISO 105 C10:2007 TS EN ISO 105 C10:2011 BS EN ISO 105 C08:2002 BS EN ISO 105 C08:2010 EN ISO 105 C08:2010 ISO 105 C08:2010 BS EN ISO 105 C09:2003 EN ISO 105 C09:2003 ISO 105 C09:2001

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 2 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Colour Fastness to: (contd) Washing (contd) TS EN ISO 105 C08:2003 TS EN ISO 105 C08:2003 +

    A1:2010 TS EN ISO 105-C06:2001 TS EN ISO 105 C06:2010 TS EN ISO 105-C09:2003 TS EN ISO 105 C09:2005 +

    A1:2009 Domestic laundering BS EN ISO 105:C06:1997

    BS EN ISO 105 C06:2010 AATCC 61:2010 EN ISO 105:C06:1997 EN ISO 105 C06:2010 ISO 105:C06:1994 ISO 105 C06 :2010

    Phenolic yellowing Courtaulds method

    ISO 105-X18:2007 BS EN ISO 105 X18:2007 EN ISO 105 X18:2007 TS EN ISO 105 X18:2008

    Rubbing/Crocking BS EN ISO 105:X12:2002

    AATCC 8:2007 EN ISO 105:X12:2002 TS EN ISO 105 X12:2006 ISO 105 X12:2001 BS EN ISO 11640:1998 EN ISO 11640:1998 ISO 11640:1993

    Organic Solvent ISO 105 D02:1993

    BS EN ISO 105 D02:1996 TS 7807 EN ISO 105-D02:2002

    Dry cleaning BS EN ISO 105:D01:1995

    BS EN ISO 105 D01: 2010 EN ISO 105 D01:2010 ISO 105:D01:1993 ISO 105 D01: 2010 AATCC 132:2009 TS EN ISO 105 D01:2010

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 3 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Colour Fastness to: (contd) Chlorinated water BS EN ISO 105:E03:1997

    BS EN ISO 105 E03: 2010 EN ISO 105:E03:1996 EN ISO 105 E03: 2010 TS EN ISO 105 E03:2010 ISO 105 E03:2010

    Dye transfer AATCC 163:2007 Perspiration BS EN ISO 105:E04:1996

    BS EN ISO 105 E04:2009 ISO 105:E04:2008 AATCC 15:2009 EN ISO 105:E04:1996 EN ISO 105 E04:2009 TS EN ISO 105 E04:2006 TS EN ISO 105 E04:2010

    Artificail Sweat/Saliva 35 LMBG 82.10.1:1985

    BVL B 82.10-1:1985 DIN V 53160-1:2010 DIN V 53160-2:2010

    Water BS EN ISO 105:E01:1996

    (withdrawn) BS EN ISO 105 E01:2010 AATCC 107:2009 EN ISO 105:E01:2010 TS EN ISO 105 E01: 2010 ISO 105 E01:2010

    Water Spotting on upholstery

    fabrics BS EN ISO 105-E16:2007

    Sea water BS EN ISO 105 E02:1996

    EN ISO 105:E02:1996 ISO 105 E02:1994 AATCC 106:2009 TS 397 EN ISO 105 E02:2002

    Assessment of migration of textile

    colours into polyvinyl chloride coatings

    BS EN ISO 105-X10:1996

    Solar UV protective properties BS EN 13758-1:2002,

    BS EN 13758-2:2003 AATCC 183-2004

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 4 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Colour Fastness to: (contd) TEXTILES & PLASTICS UV ageing/irradiation ISO 4892-3:2006

    ASTM G154-06 METALLICS Corrosion - Salt Spray (Fog) ASTM B117-11

    Physical Testing Dimensional stability to washing BS EN ISO 6330:2001 BS EN ISO 6330:2002 + A1:2009 ISO 6330:2000 Amd 1:2009 EN ISO 6330:2000 BS EN 25077:1994 BS EN ISO 5077:2008 EN ISO 5077:2008 ISO 5077:2007 ISO 3759:2011 BS EN ISO 3759:2008 EN ISO 3759:2008 BS EN 26330:1994 withdrawn AATCC 135:2010 AATCC 150:2010 TS EN ISO 5077:2009 TS EN ISO 3759:2009 TS 5720 EN ISO 6330:2002 Dimensional stability to dry cleaning AATCC 158:2005

    ISO 3175-2:2010 BS EN ISO 3175-2:2010 TS EN ISO 3175-2:2010

    Fabric weight BS 2471:2005

    ISO 3801:1977 ASTM D3776/3776M:2009a TS 251 (Part 6):1991 BS EN 12127:1998

    Fabric Count TS 250 EN 1049-2:1996

    BS EN 1049-2:1994 EN 1049-2:1993

    Yarn Number BS 2865:1984

    ISO 7211-5:1984

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 5 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Physical Testing (contd) Tensile strength BS EN ISO 13934-1:1999

    EN ISO 13934-1 :1999 ISO 13934-1 :1999 BS EN ISO 13934-2:1999 EN ISO 13934-2 :1999 ISO 13934-2 :1999 TS EN ISO 13934-1:2002 TS EN ISO 13934-2:2002 ASTM D 5034:2009

    Elastic fabrics

    - Modulus - Residual extension

    BS 4952:1992 withdrawn BS EN 14704-1:2005

    Dimensional stability to steam BS 4323:1979

    ISO 3005:1978

    Tear Strength ASTM D1424:2009 BS EN ISO 13937-1:2000 EN ISO 13937-1:2000 BS EN ISO 13937-2:2000 EN ISO 13937-2:2000 ISO 13937-1 and -2:2000 ASTM D2261:2007a TS EN ISO 13937-1:2002 TS EN ISO 13937-2:2002 BS EN ISO 3377-2 :2002

    Seam properties BS 3320:1988 (withdrawn)

    BS EN ISO 13936-1:2004 EN ISO 13936-1:2004 ISO 13936-1:2004 BS EN ISO 13936-2:2004 EN ISO 13936-2:2004 ISO 13936-2:2004 BS EN ISO 13936-3:2007 EN ISO 13936-3:2007

    ISO 13936-3:2005 ASTM D 434:1995

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 6 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Physical Testing (contd) Seam properties (contd) TS EN ISO 13936-1:2006

    TS EN ISO 13936-2:2006 TS EN ISO 13936-3:2007 TS 1619-1 EN ISO 13935-1:2002 BS EN ISO 13935-1:1999

    EN ISO 13935-1:1999 ISO 13935-1:1999 NF G07-118-1 :1999 TS 1619-2 EN ISO 13935-2:2002

    BS EN ISO 13935-2:1999 EN ISO 13935-2:1999 ISO 13935-2:1999

    Spray BS EN 24920:1992

    EN 24920 :1992 ISO 4920:1981 TS 259 EN 24920:2001

    Bursting strength BS EN ISO 13938-2:1999

    ASTM D3786/3796M:2009 TS EN ISO 13938-2:2003 EN ISO 13938-2:1999 ISO 13938-2:1999

    Abrasion resistance (Martindale) BS EN ISO 12947:Parts 1, 2, 3 and

    4 except for stretch fabrics:1998 TS EN ISO 12947- Parts 1, 2, 3 and 4 except for stretch fabrics:2001 EN ISO 12947:Parts 1, 2, 3 and 4:1998 ISO 12947:Parts 1, 2, 3 and 4:1998

    Abrasion Resistance (Knitted

    Footwear) BS EN 13770:2002 NF EN 13770:2002

    Air Permeability ASTM D737-04 (2008) e1

    BS EN ISO 9237:1995 TS 391 EN ISO 9237-1999

    Oil Repellency AATCC 118:2007

    BS EN ISO 14419:2010 TS EN ISO 14419:2010 EN ISO 14419: 2010 ISO 14419:2010

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 7 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Physical Testing (contd) Resistance to water penetration AATCC TM127-2008

    BS EN 20811:1992 ISO 811:1981 TS 257 EN 20811:1996

    Print durability IHTM 1:2007 TL.2.246 Spirality IHTM 2:2007 TL.2.351

    AATCC 179: 2010 ISO 16322-2:Cor 1:2007 & 3: 2005

    Appearance assessment IHTM 7:2006 TL.2.249

    ISO 3175-1:2010 BS EN ISO 3175-1:2010 TS EN ISO 3175-1:2010 AATCC 124:2010 AATCC 143:2010 ISO 7768:2009 BS ISO 7768:2006 ISO 7769:2009 BS ISO 7769:2006 ISO 7770:2009 BS ISO 7770:2009 AATCC 128:2009 ISO 9867:2009 TS ISO 9867:2005

    Pilling resistance BS 5811:1986 withdrawn

    BS EN ISO 12945-1:2001 EN ISO 12945-1:2001 ISO 12945-1:2000 BS EN ISO 12945-2:2000 EN ISO 12945-2:2001 ISO 12945-2:2000 TS EN ISO 12945-1:2002 TS EN ISO 12945-2:2002 ASTM D3512D3512M:10e1 TS 10258:1992

    Snagging BS 8479 :2008 Trim attachment IHTM 012:2003 TL.2.354

    EN 71-1:2005 + A9:2009

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 8 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Chemical Tests pH value BS EN 1413:1998 (withdrawn)

    BS EN ISO 3071:2006 EN ISO 3071:2006 TS EN ISO 3071:2009 ISO 3071:2005 AATCC 81:2006 IHTM AL.2.010:2010 based on GB/T 7573:2009 GB/T 2724:2005 By pH meter

    Pigmented or Coated Total Lead (By mass only) IHTM AL.2.070:, based on ASTM

    E1613:2004 and ASTM E 1645:2001 (2007) using microwave or acid digestion, by ICP (OES) and AAS

    Fibre composition BS 4407:1988,(withdrawn) Methods

    1, 2, 4, 7, 8, 10, 11, 14, 15, and 18 and Section 3 EU Directive 1007/2011 Methods 1,2,4,7,8,10,11,13 & 15

    ISO 1833 Methods 3:2006, GB/T

    2910.3:2009 , Methods 4:2006 & GB/T 2910.4:2009, Methods 7:2006 & GB/T 2910.7:2009, Methods 8: 2006 & GB/T 2910.8:2009, Methods 11:2006 & GB/T 2910.11:2009, Methods 12:2006 & GB/T 2910.12:2009, Methods 16: 2006 & GB/T 2910.16:2009 and Methods 18:2006 & GB/T 2910.18:2009

    Quantative Fibre Composition AATCC 20A:2011 except Methods 9, 10 & Microscopic

    ASTM D629:2008, Methods 1, 4, 5, 6, 8, 9, and 10

    NFG 06 006/003, 004, 005, 007, 008, 011, 027 (2006)

    ISO 1833 Part 1:2006 FZT 01095 :2002 Methods A & B

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 9 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Chemical Tests (contd) Free Phenol IHTM AL.2.224, based on EN71-9

    table 2D, 71-10 sections 7 & 8.6, and 71-11 section 5.5.2

    Formaldehyde content analysis BS 6806:Part 2:1987 (withdrawn)

    BS 6806:Part 3:1987 (withdrawn) BS 6806:2002 JIS L 1041:2011, Methods A & B BS EN ISO 14184-1:2011 ISO 14184-1:2011 64LFBG B 82.02.1(35 LMBG B 82.02.1):1985 BS EN ISO 14184-2:1998 ISO 14184-2:1998 AATCC 112:2008 IHTM AL.2.009: based on GB/T 2912.1:2009 By UV.VIS Spectrophotometry

    Clothing Components Nickel release BS EN 12472:2005 + A1:2009

    BS EN 1811:2011 By ICP (MS) or AAS To implement the requirements of REACH Regulation 1907/2006 Annex XVII Item 27

    Spectacle Frames Nickel Release BS EN 16128:2011

    Using ICP(OES) or AAS Toys and Packaging Components BHT content IHTM AL.2.093: based on ASTM D

    4275-09By GC/MS Toys Toxic metal migration BS EN 71-3:1995 +A1:2000

    +AC:2002 BS 5665:Part 3:1995 ASTM F963 section 8.3 By ICP.OES or AAS

    Packaging Components Total heavy metals IHTM AL.2.101: By ICP.OES or

    AAS

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 10 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Chemical Tests (contd) Cadmium content BS EN 1122:2001 (Method B) and

    IHTM AL.2.004using microwave or acid digestion. To implement the requirements of REACH Regulation 1907/2006 Annex XVII Item 23 as amended by 494/2011 By ICP.OES or AAS

    Packaging Components, Toys, Plastics, Coated Textiles

    Phthalate content IHTM AL.2.026based on EN 14372 :2004 Section 6.3, using microwave or Soxhelet extraction to meet the requirements of 2005/84/EC By GC/MS BS EN 15777:2009 or DIN EN 15777:2009 To implement the requirements of REACH Regulation 1907/2006 Annex XVII Item 51 & 52 by GC.MS

    Textiles, Plastic Poly Aromatic Hydrocarbons in

    textiles IHTM AL.2.032based on ZEK-01-04-08 By GC/MS

    Packaging Components, Plastic, Coated Textile

    The Detection of Polyvinyl Chloride in plastics by Solvent Extraction and FT-IR

    IHTM AL.2.024:2011 By FTIR

    Electrical and Electronic Goods Toxic elements analysis for

    WEEE/ROHS/ELV IHTM AL.2.133:2011 and AL.2.007:2008, implementing IEC 62321:2008. By ICP (OES)/ AAS, UV/VIS and XRF spectrophotometry

    Detection of PBB and PBDE IHTM AL.2.202:2008 and

    AL.2.008:2008 implementing IEC 62321 2008 To implement the requirements of REACH Regulation 1907/2006 Annex XVII Item 8 for PBB using XRF screening and GC/MS and HPLC

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 11 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Chemical Tests (contd) Toys and Child Products Paints and surface coatings

    Total Lead content IHTM AL.2.102& AL2.145to implement CPSC-CH-E1003.09.1 using microwave or wet acid digestion By ICP.OES or AAS to meet the requirements of 16 CFR 1303:2012 and CPSA:2008 Section 101

    Non metallics Total Lead Content IHTM AL 2.206to implement CPSC-

    CH-E1002-08.2 using microwave or acid digestion by ICP.OES & AAS to meet the requirements of CPSA:2008 Section 101

    Metallics, including childrens Jewellery and metallic products

    Total Lead Content IHTM AL 2.145to implement CPSC-CH-E1001-08.2 using microwave or acid digestion by ICP.OES and AAS to meet the requirements of CPSA:2008

    Toys and Child Products Phthalates IHM AL 2.144to implement

    CPCS-CH-C1001-09.3 and the requirements of REACH Regulation 1907/2006 Annex XVII Item 51 & 52 using solvent extraction and GC.MS

    Textiles, Packaging Component,Plastic,Toys,Coated Textile

    Phthalates EN ISO 15777:2009 to implement the requirements of REACH Regulation 1907/2006 Annex XVII Item 51 & 52 by GC.MS

    Ceramic and Glass Ware Lead and cadmium release BS 6748:1986 +A1:2011

    ISO 6486:Parts 1 and 2:1999 BS EN ISO 10545-15:1997 ISO 7086 1&2:2000 supplemented by IHTM AL.2.199to meet the requirements of 84/500 EEC By ICP.OES or AAS

    Leather pH BS EN ISO 4045:2008

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 12 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Chemical Tests (contd) Leather PCP and PCP Acetate TetraCP &

    TriCP and Acetate IHTM AL.2.165 based on DIN 53313:1996(2002) By GC/MS and GC/ECD BS EN ISO 17070:2006 to implement the requirements of REACH Regulation 1907/2006 Annex XVII Item 22 by GC MS / GC/ECD

    Textiles PCP, TetraCop, & TriCP NF XP G08-015:August 2000

    64 LFBG B 82.02.8: (35 LMBG 82.02.8) June 2001 to implement the requirements of REACH Regulation 1907/2006 Annex XVII Item 22 By GC/MS and GC/ECD

    DCM Extractable chlorinated

    organic carriers IHTM AL.2.005: By GC/ECD and GC/MS

    Acetone Extractable PCBs in

    Textiles IHTM AL.2.031 By GC/ECD and GC/MS

    Plastics, Textiles and Coated Textiles

    Organo Tin Compounds IHTM AL.2.030By GC/MS

    Leather Formaldehyde BS EN ISO 17226-2:2008

    GB/T 19941:2005 byUV/Vis Spectrophotometry

    Leather Chromium (VI) DIN 53314:1997

    BS EN ISO 17075:2007 64 LFGB B 82.02-11 By UV.VIS Spectrophotometry

    Textiles, Leather and Plastics APEO IHTM AL.2.037to implement the

    requirements of REACH Regulation 1907/2006 Annex XVII Item 46 for NP & NPEO by HPLC (MS/MS)

    Textiles, Metals and Plastics PFOS IHTM AL.2.123by HPLC &

    GC (MS) Textiles, leather & Silica gels Dimethyl Fumerate IHM AL 2.136by GC.MS

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 13 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TEXTILES (contd) Chemical Tests (contd) Textiles and Leather AZO Dyes & 4-Aminoazobenzene

    Leather Textile materials

    DIN 53316:1997 EN 14362, Methods 1 and 2:2003 64LFBG 82.02.3 (35 LMBG Method 82.02/3:2004) BS EN ISO 17234-2:2011 for 4AAB ISO 17234-1:2010 & 2: 2011 GB/T 23344:2009 64 LFBG 82.02.4 (35 LMBG Method 82.02/4:2004) 64 LFBG 82.02.2 (35 LMBG Method 82.02/2:2004) GB/T 19942:2005 64 LFBG B-82-02-9: 2006 Berichtigung 2008 supplemented by IHTM AL.2.027:2011 To implement the requirements of REACH Regulation 1907/2006 Annex XVII Item 43 By GC/MS and HPLC

    EN 14362-1:2012, GB/T17592:2011

    EN 14362-3:2012 for 4AAB By GC(MS) and HPLC

    Allergenic disperse dyes IHTM AL.2.090and 178based on

    DIN 54231:2005 & 64LFGB B82.02.10:2007By HPLC/DAD and LC.MS/MS

    Carcinogenic dyes IHTM AL.2.091based on

    DIN 54231:2005 64LFGB B82.02.10:2007 By HPLC/DAD and LC (MS/MS)

    Toys Flammability Testing EN 71-2:2011 Nightwear garments M&S P116:August 2006

    EN 14878:2007 # BS 5438:1976

    # BS 5722:1984 # For the purposes of the Nightwear (Safety) Regulations SI No 2043: 1985 and 1987

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 14 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    Flammability Testing (contd) Childrens sleepwear 16 CFR 1615: 2010

    16 CFR 1616:2010 Apparel 16 CFR 1610:2010

    ASTM D1230-10 EN 1103:2005

    Flame Spread - Fabrics & Plastic Horizontal burning rate BS EN ISO 6941:2003

    BS EN ISO 6941:1995 FMVSS 302:1972 ISO 3795:1989 TS ISO 3795:1999 95/28/EC Annex IV

    Surface flash M&S P117:May 2003

    BS 4569:1983 Cleaning and wetting prior to

    flammability testing BS 5651:1978 BS 5651:1989

    Carpets and Rugs Surface flammability 16 CFR1630 and 1631:2010 Curtains and Drapes Rate of flame spread BS EN 1102:1996 Textile Fabrics Plastics Flammability UL94:2009 FURNITURE, FURNISHINGS and BEDDING

    Ignitability **BS 5852:Part 1:1979 **For the purpose of the Furniture and Furnishings (Fire) (Safety) Regulations, SI 1324, 1988 Schedules 4 & 5

    TOYS Mechanical and Physical Properties BS EN 71-1:2011 for the clauses

    and tests detailed below: 4 General Requirements 4.1 Material 4.2 Assembly 4.3 Flexible plastic sheeting 4.4 Toy bags 4.5 Glass 4.6 Expanding materials 4.7 Edges

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 15 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TOYS (contd) Mechanical and Physical Properties

    (contd) BS EN 71-1:2011 for the clauses and tests detailed below:

    4.8 Points and metallic wires 4.9 Protruding parts 4.10 Parts moving against each

    other 4.10.1 Folding and sliding

    mechanisms 4.10.2 Driving mechanisms 4.10.3 Hinges 4.10.4 Springs 4.11 Mouth actuated toys

    (excluding 4.11c and 4.11e) 4.12 Balloons 4.14 Enclosures (excluding

    4.14.1.c) 4.14.2 Masks and Helmets 4.15.1 Toys Intended to Bear the

    Mass of a Child (excluding 4.15.1.3 - Dynamic Strength & 4.15.1.5 - Braking

    4.15.3 Rocking Horses and other similar toys

    4.15.4 Toys not propelled by a child 4.16 Heavy immobile toys 4.17 Projectiles 4.17.1 General 4.17.2 Projectile toys without stored

    energy 4.17.3 Projectile toys with stored

    energy 4.17.4 Bows and Arrows 4.18 Aquatic toys 4.19 Percussion caps 4.21Toys containing a non-electrical

    heat source 4.22 Small balls 4.23 Magnets 5 Toys intended for children under

    36 months 5.1 General requirements 5.2 Filling materials 5.3 Plastic Sheeting 5.4 Cords on toys 5.5 Liquid filled toys 5.7 Glass and Porcelain

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 16 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    Toys (cont) Mechanical and Physical Properties

    (cont) BS EN 71-1:2011 for the clauses and tests detailed below (cont)

    5.8 Shape and size of certain toys 5.9 Toys comprising monofilament

    fibres 5.10 Small balls 5.11 Play figures 5.12 Hemispheric - shaped toys 5.13 Suction cups 6 Packaging 7 Warnings and instructions for use

    (all sub-sections) Test Methods 8.1 General Requirements for

    testing 8.2 Small parts cylinder 8.3 Torque 8.4 Tension test including: - 8.4.2.1 General 8.4.2.2 Seams and materials 8.4.2.3 Protective components 8.5 Drop test 8.6 Tip over test 8.7 Impact test 8.8 Compression test 8.9 Soaking test 8.10 Accessibility 8.11 Sharpness of edges 8.12 Sharpness of points 8.13 Flexibility of metallic wires 8.14 Expanding materials 8.15 Leakage of liquid filled toys 8.16 Geometric toys 8.18 Folding or sliding mechanisms 8.20 Cord thickness 8.21 Static strength 8.23 Stability 8.24.1 Kinetic Energy of Projectiles 8.24.2 Kinetic Energy of Bows and

    Arrows 8.25 Plastic sheeting 8.30 Measurement of temperature

    rises 8.32 Small balls and suction cups 8.32.2 Small Balls with Stings 8.33 Test for play figures 8.34 Tension Test for Magnets 8.35 Magnetic Flux Index

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 17 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TOYS Toy Safety ASTM F963 - 2011for the clauses

    and tests detailed below: 4.6 Small objects (excluding 4.6.2) 4.7 Accessible edges 4.7.1 4.7.2 4.7.3 Metal toys 4.7.4 Moulded toys 4.7.5 Exposed bolts or threaded

    rods 4.8 Projections 4.9 Accessible points 4.9.1 4.9.2 4.9.3 Wood 4.10 Wires or rods 4.11 Nails and fasteners 4.12 Packaging film 4.13 Folding mechanisms and

    hinges 4.13.1 Folding mechanisms 4.13.2 Hinge line clearance 4.15.1 Toys propelled by a child or

    by other means. Excluding 4.15.1.3 - Dynamic Strength and 4.15.1.5 - Braking)

    4.20 Pacifiers (excluding 4.20.1) 4.22 Teethers and teething toys 4.22.3 Exclusion 4.23 Rattles 4.24 Squeeze toys 4.28 Stuffed and bean bag toys 4.29 Stroller and carriage toys 4.30 Art Materials (excluding

    4.30.1) 4.32 Balloons 4.33 Certain toys with spherical

    ends 4.33.1 4.33.1.1 Exclusion 4.33.2 Preschool play figures 4.34 Marbles 4.35 Balls 4.37 Hemispheric-shaped objects 4.37.1 4.37.2

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 18 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    TOYS (contd) Toy Safety (contd) ASTM F963 - 2011for the clauses

    and tests detailed below: (contd) 4.37.3 4.37.4 4.37.5 4.37.6 Performance requirements 5 Labelling requirements (all

    sections) 6 Instructional literature (all

    sections) 7 Producers markings (all sections) 8 Test methods 8.1 General 8.5 Normal use testing 8.6 Abuse testing 8.7 Impact test 8.7.1 Drop test 8.7.2 Tip over test 8.7.4 Impact test for toys that cover

    the face 8.8 Torque test for removable

    components 8.9 Tension test for removable

    components 8.9.1 Tension test for seams in

    stuffed toys and beanbag-type toys 8.9.1.1 8.9.1.2 8.10 Compression Test 8.12 Flexure test 8.22 Packaging film thickness 9 Identification 16 CFR 1500 parts .48 Sharp Edge

    and .49 Sharp Point tests 16 CFR 1501 Small parts 16 CFR 1511 Requirements for

    pacifiers. (excluding 4.20.1 of ASTM F963 - level of nitrosamines).

    16 CFR 1510 Childrens Clothing Mechanical Safety BS 7907:2007 Annexes B & C Childrens outerwear ASTM F1816-97(Reapproved 2004)

    Drawstrings on childrens outerwear

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 19 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    POWDER DETERGENTS

    anionic active matter,nonionic active matter, total active matter sulphate, pH , active oxygen,percarbonate,soap, foam binding of Ca, density,oxygen activator (TAED), dry matter, water-insoluble inorganic substance sodium carbonate

    IHM AL2.244 SASO 509/2007 (GSO 152/2007) SASO 1874/2001 TS 518:1990

    LIQUID GLASS CLEANERS

    pH, density, nonionic active matter foam, freezing point, alcohol

    IHM AL2.227 TS 11636:2005

    DESCALERS

    ph, density, total acidity

    IHM AL2.228 Devlet Malzeme Ofisi R-12.f/06.11.2007

    RINSE AIDS

    pH, total active matter, anionic active matter nonionic active matter, density

    IHM AL2.234 TS 13410:2011

    INDUSTRIAL DISHWAHING DETERGENTS

    pH, density, nonionic active matter, foam total alkalinity, active chlorine, total acidity binding capacity of Ca

    IHM AL2.235 TSE K 22:2008

    LAUNDRY SOFTENERS

    cationic active matter, pH, viscosity total active matter, dry matter, density

    IHM AL2.236 TS 13274:2007 ISO 2871-1 & 2:2010

    RESERVIOR BLOCKS LIQUID SURFACE CLEANERS

    anionic active matter, nonionic active matter total active matter, pH nonionic active matter, pH, viscosity total active matter, dry matter

    IHM AL2.237 TS 518:1990 IHM AL2.238 TS 12039:1996

    LIQUID HAND SOAPS

    Dry matter, potentiometrical anionic active matter nonionic active matter, inorganic salts, pH viscosity, glycerin, total active matter

    IHM AL2.239 TS 11885:2000

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 20 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    BODY SHAMPOOS pH, total active matter, anionic

    active matter nonionic active matter, density viscosity, inorganic salts

    IHM AL2.240 TS 9676: 1991 TS 518:1990

    SURFACE CLEANING MATERIALS

    pH, density, total active matter anionic active matter, nonionic active matter foam, stability

    IHM AL2.241 TS 12039:2000

    SHAMPOOS & HAIR CLEANERS

    cationic active matter, pH, viscosity density, total active matter dry matter, inorganic salts

    IHM AL2.242 TS 9676:1991 TS 518:1990 S ISO 2781-1 & 2:2010

    DETERGENCY DISHWASHING

    Effectiveness & Efficiency

    IHM AL2.267 IKW SOFW J132B:2006

    DETERGENCY HANDWASHING

    Effectiveness & Efficiency

    IHM AL2..266 IKW SOFW J128-5;2002

    LEATHER, TEXTILE and ACCESSORIES

    Acid Sweat extractable heavy metals (Pb,Cd, Cr, As, Co, Ni, Hg, Cu, Sb)

    IHM AL2.071 EOKOTEX 100section 3.1:2012 ISO 17072-1:2011 using ICP(MS) or ICP (OES)

    TOYS and CHILDREN'S ARTICLES LEATHER, & TEXTILES

    Saliva extractable heavy metals (Pb, Cd, Cr, As, Co, Ni, Hg, Cu, Sb)

    IHM AL2.071 64LFGB (35LMBG) B82.10: 1985, using ICP(MS) or ICP(OES)

    PLASTICS, TEXTILES, LEATHER

    Total heavy metals (Pb, Cd, Cr, As, Co, Ni, Hg, Cu, Sb)

    IHM AL2.222 EPA 3050, 3051, 3051A, 3052 ISO 17072-2:2011 using hot plate or micrwave digestion and ICP(MS) or ICP(OES)

    METALS, Including CHILDREN's JEWELLERY

    Extractable Cadmium

    AL2.275 ASTM F963-11 section CPSC-CH-E1004-11 section 4.3.5.2(2)c & 8.3.5.5(3) using ICP(MS) or ICP(OES)

    TEXTILES, LEATHER, FR LIQUIDS & FOAMS

    PFOS & PFOA

    UHM AL2.123 CEN TS 15968:2010, using extraction and LC(MS/MS)

  • 2111

    Accredited to ISO/IEC 17025:2005

    Schedule of Accreditation issued by

    United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

    Intertek Test Hizmetleri A.S.

    Issue No: 024 Issue date: 22 January 2013

    Testing performed at main address only

    Assessment Manager: PL Page 21 of 21

    Materials/Products tested

    Type of test/Properties

    measured/Range of measurement

    Standard specifications/

    Equipment/Techniques used

    DETERGENTS Stain Removal Performance TL2.715 FABRIC SOFTENERS Performance TL2.393 with ASTM D4032:2008

    FABRIC SOFTENERS Odour Detection TL2.716 SURFACE CLEANERS Lime Removal TL2.743

    END