250-271_nbu7.5_unix_studyguide
TRANSCRIPT
-
8/10/2019 250-271_NBU7.5_UNIX_StudyGuide
1/8
Copyright 2012 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and NetBackup are registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners. Specifications and product offerings are subject to change without notice.
Administration of Symantec NetBackup7.5 for UNIX
Study Guide
The following tables list the Symantec SCS Certification exam objectives for theAdministration ofSymantec NetBackup 7.5 for
UNIX exam and how these objectives align to the Symantec NetBackup 7.5 for UNIX: Administration course and the Symantec
NetBackup 7.5 for UNIX and Windows: Advanced Administrationcourse.
The recommended course to prepare for this exam is:
Symantec NetBackup 7.5 for UNIX and Windows : Advanced Administration (ILT/VA)
Symantec NetBackup 7.5 for UNIX: Administration (ILT/VA/OD-ILT)
or
Symantec NetBackup 7.5 for UNIX : Install, Configure, and Deploy(ILT/VA)
andSymantec NetBackup 7.5 for UNIX : Manager and Administer (ILT/VA)
The product documentation for this course includes the following:
Symantec NetBackup Administrator's Guides (UNIX and Linux or Windows)
Symantec NetBackup Installation Guide (UNIX and Linux or Windows)
Symantec OpsCenter Administrator's Guide
Symantec OpsCenter Reporting Guide
Symantec NetBackup Deduplication Guide
Symantec NetBackup Troubleshooting Guide
Symantec NetBackup Status Codes Reference Guide
Symantec NetBackup Commands Reference Guide
Examples of Hands-on Experience (Real World or Virtual):
Install NetBackup 7.5 server and client software on supported Windows- or UNIX-based platforms.
Upgrade a NetBackup environment to version 7.5, including the upgrade of master server, media server, and client
software on supported Windows- or UNIX-based platforms.
Describe NetBackup terminology and architecture.
Describe NetBackup communication mechanisms.
Describe NetBackup general hardware and software requirements.
Start and stop NetBackup on supported NetBackup server and client platforms. Perform common NetBackup configuration tasks, including (but not limited to): device configuration, media manager an
disk storage unit configuration, storage unit group configuration, volume and volume pool configuration, storage server
and disk pool configuration, and policy, schedule, and storage lifecycle policy configuration.
Perform common NetBackup administrative tasks, including (but not limited to): device monitoring and status
manipulation, storage unit and storage unit group monitoring, removable media monitoring and management tasks, polic
schedule, and storage lifecycle policy administration, job monitoring and administration, NetBackup report generation an
analysis
Identify and collect NetBackup failure status and related information.
-
8/10/2019 250-271_NBU7.5_UNIX_StudyGuide
2/8
Copyright 2012 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and NetBackup are registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners. Specifications and product offerings are subject to change without notice.
Troubleshoot and resolve common backup and restore problems.
Gather NetBackup troubleshooting information and log files using utilities provided with NetBackup.
For more information on the Symantec Certification Program, visithttp://go.symantec.com/certification.
EXAM AREA 1
Install Symantec NetBackup 7.5
Exam ObjectivesCourse Topics from
Symantec NetBackup 7.5 for UNIX or Windows:Administration
Describe the roles, functions, and the topology of majorSymantec NetBackup components including the master, media,EMM servers, clients, storage server, OpsCenter, agents, andoptions.
Lesson 1: Introducing NetBackup
Topic: The NetBackup environment
Topic: NetBackup conceptsTopic: NetBackup options and agents
Describe the installation of the Symantec NetBackup masterserver, media server, and client including remote clientinstallation methods available within Symantec NetBackup.
Lesson 2: Installing NetBackup
Topic: Installing your NetBackup environment
Topic: Installing NetBackup clients
EXAM AREA 2
Configure Symantec NetBackup 7.5
Exam ObjectivesCourse Topics from
Symantec NetBackup 7.5 for UNIX or Windows:Administration
Describe how to configure various master/media/client settingsand host properties using the Symantec NetBackupadministration console.
Lesson 3: Using the NetBackup Administrative Interfaces
Topic: The NetBackup Administration Console
Describe how to configure removable media, volume pools, andvolume groups.
Lesson 4: Configuring Tape Storage and Media
Topic: NetBackup storage device concepts
Topic: Configuring tape devices
Topic: Configuring media
Explain how to verify the functionality of tape and disk devices inthe operating system.
Lesson 4: Configuring Tape Storage and Media
Topic: Verifying tape storage
Lesson 5: Configuring Disk Storage
Topic: Verifying disk storage
http://go.symantec.com/certificationhttp://go.symantec.com/certificationhttp://go.symantec.com/certificationhttp://go.symantec.com/certification -
8/10/2019 250-271_NBU7.5_UNIX_StudyGuide
3/8
Copyright 2012 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and NetBackup are registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners. Specifications and product offerings are subject to change without notice.
Exam ObjectivesCourse Topics from
Symantec NetBackup 7.5 for UNIX or Windows:Administration
Describe how to configure storage units, storage unit groups,and Storage Lifecycle Policies.
Lesson 5: Configuring Disk Storage
Topic: Configuring basic NetBackup disk storage
Topic: Configuring AdvancedDisk
Lesson 4: Configuring Tape Storage and Media
Topic: NetBackup storage device concepts
Lesson 8: Protecting Backup Data
Topic: Storage lifecycle policy concepts
Topic: Using storage lifecycle policies
Describe how to configure and utilize policy attributes. Lesson 6: Configuring File System Backups
Topic: Introduction to backup policies
Topic: Configuring file system backup policies
Topic: Viewing and editing a policy
Describe how to configure and utilize policy scheduling. Lesson 6: Configuring File System Backups
Topic: Introduction to backup policies
Topic: Configuring file system backup policies
Topic: Viewing and editing a policy
Explain how to configure and utilize policy clients and backupselections.
Lesson 6: Configuring File System Backups
Topic: Introduction to backup policies
Topic: Configuring file system backup policies
Topic: Viewing and editing a policy
Explain how to implement specialized backup solutions includingsynthetic backups, True Image Restore (TIR), multiple data
streams, multiplexing, checkpoint restart, and the use of backupduplication solutions such as disk staging, Storage LifecyclePolicies, and Auto Image Replication.
Lesson 1: Monitoring NetBackup
Topic: Using and customizing the NetBackup Activity
Monitor
Lesson 3: Managing and Optimizing Disk Storage
Topic: Managing basic disk and DSSU
Lesson 4: Optimizing File System Backups
Topic: Using synthetic backups
Topic: Using multiple data streams
Topic: Optimizing tape drive performance using
multiplexing
Topic: Using incremental backups
Lesson 8: Protecting Backup DataTopic: Storage lifecycle policy concepts
Topic: Using storage lifecycle policies
Lesson 9: Protecting the NetBackup Configuration
Topic: Disaster recovery strategies
Lesson 3: Managing Advanced Backup Image Copies
Topic: Auto Image Replication
-
8/10/2019 250-271_NBU7.5_UNIX_StudyGuide
4/8
Copyright 2012 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and NetBackup are registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners. Specifications and product offerings are subject to change without notice.
Exam ObjectivesCourse Topics from
Symantec NetBackup 7.5 for UNIX or Windows:Administration
Describe the function, uses, and administration of the SymantecNetBackup deduplication options, such as media serverdeduplication, client-side deduplication, optimized duplication,storage server and NetBackup Accelerator.
Lesson 2: Managing NetBackup Deduplication
Topic: Introduction to NetBackup deduplication
Topic: Configuring NetBackup deduplication
Topic: Managing NetBackup media server deduplication
Topic: Managing NetBackup client-side deduplication
Topic: Using NetBackup Accelerator
Describe how to perform catalog backup configuration tasks. Lesson 9: Protecting the NetBackup Configuration
Topic: Introduction to NetBackup catalogs
Topic: Managing images
Topic: Performing catalog backup operations using the
wizard
EXAM AREA 3
Monitor and Maintain Symantec NetBackup 7.5
Exam ObjectivesCourse Topics from
Symantec NetBackup 7.5 for UNIX or Windows:Administration
Describe how to obtain and install Symantec NetBackup release
updates.
Lesson 6: Working with Support
Topic: Support resources
The NetBackup 7.x Upgrade Portal at
http://www.symantec.com/docs/TECH74584
The NetBackup product documentation, including the
Symantec NetBackup 7.5 Release Notes and the
Symantec NetBackup 7.5 Installation Guides
Describe media and image retention concepts and how to use the
Symantec NetBackup administration console to verify, expire, import,
and manually duplicate backup images.
Lesson 1: Introducing NetBackup
Topic: Introduction to data protection
Lesson 6: Configuring File System Backups
Topic: Viewing and editing a policy
Lesson 7: Performing File System Backups and Restores
Topic: Performing manual backup operations
Lesson 9: Protecting the NetBackup Configuration
Topic: Managing images
http://www.symantec.com/docs/TECH74584http://www.symantec.com/docs/TECH74584http://www.symantec.com/docs/TECH74584 -
8/10/2019 250-271_NBU7.5_UNIX_StudyGuide
5/8
Copyright 2012 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and NetBackup are registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners. Specifications and product offerings are subject to change without notice.
Exam ObjectivesCourse Topics from
Symantec NetBackup 7.5 for UNIX or Windows:Administration
Describe how to maintain Symantec NetBackup tape and diskdevices.
Lesson 2: Managing and Optimizing Tape Storage
Topic: Managing robots and tape drives
Topic: Media- and device-related tips
Lesson 3: Managing and Optimizing Disk Storage
Topic: Managing basic disk and DSSU
Topic: Managing AdvancedDisk and disk pools
Topic: Disk-related tips
Describe how to maintain Symantec NetBackup tape and diskmedia including media rotation and media availability.
Lesson 2: Managing and Optimizing Tape Storage
Topic: Monitoring media and media states
Topic: Managing tapes
Lesson 8: Protecting Backup Data
Topic: Backup duplication concepts
Lesson 9: Protecting the NetBackup configuration
Topic: Performing catalog backup operations using the
wizard
Interpret available reports to verify and monitor SymantecNetBackup.
Lesson 3: Using the NetBackup Administrative Interfaces
Topic: The NetBackup Administration Console
Topic: NetBackup OpsCenter
Lesson 1: Monitoring NetBackup
Topic: Reporting using the NetBackup Administration
Console
Topic: Reporting using Symantec OpsCenter
Describe how and when to prioritize, cancel, suspend, resume,restart, retry or manually run backup jobs.
Lesson 7: Performing File System Backups and Restores
Topic: Performing manual backup operations
Lesson 1: Monitoring NetBackup
Topic: Using and customizing the NetBackup Activity
Monitor
Describe how to initiate, prioritize, and monitor SymantecNetBackup restore jobs from normal and true image backups.
Lesson 7: Performing File System Backups and Restores
Topic: Performing restore operations using the Windows
BAR interface
Topic: Performing restore operations using OpsCenter
Operational RestoreTopic: Backup and restore job-related tips
Lesson 4: Optimizing File System Backups
Topic: Using synthetic backups
EXAM AREA 4
-
8/10/2019 250-271_NBU7.5_UNIX_StudyGuide
6/8
Copyright 2012 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and NetBackup are registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners. Specifications and product offerings are subject to change without notice.
Tune Symantec NetBackup 7.5
Exam ObjectivesCourse Topics from
Symantec NetBackup 7.5 for UNIX or Windows:
Administration
Analyze, optimize, and tune Symantec NetBackup and backupdevices.
Lesson 4: Configuring Tape Storage and Media
Topic: Verifying tape storage
Lesson 5: Configuring Disk Storage
Topic: Verifying disk storage
Lesson 7: Performing File System Backups and Restores
Topic: Performing manual backup operations
Topic: Backup and restore job-related tips
Lesson 9: Protecting the NetBackup configuration
Topic: Catalog-related tips
Lesson 1: Monitoring NetBackup
Topic: Using and customizing the NetBackup Activity
Monitor
Topic: Reporting using the NetBackup Administration
Console
Topic: Reporting using Symantec OpsCenter
Lesson 2: Managing and Optimizing Tape Storage
Topic: Managing robots and tape drives
Topic: Media-and device-related tips
Lesson 3: Managing and Optimizing Disk StorageTopic: Managing basic disk and DSSU
Topic: Managing AdvancedDisk and disk pools
Topic: Disk-related tips
Lesson 4: Optimizing File System Backups
Topic: File system backup challenges
Topic: Using incremental backups
Topic: Introduction to file system snapshots
Topic: Using multiple data streams
Topic: Optimizing tape drive performance using
multiplexing
Topic: Using synthetic backups
Topic: Using FlashBackup
Lesson 6: Working with Support
Topic: Support resources
Topic: NetBackup processes, services, and daemons
-
8/10/2019 250-271_NBU7.5_UNIX_StudyGuide
7/8
Copyright 2012 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and NetBackup are registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners. Specifications and product offerings are subject to change without notice.
EXAM AREA 5
Troubleshooting Symantec NetBackup 7.5
Exam Objectives Course Topics fromSymantec NetBackup 7.5 for UNIX or Windows:Administration
Interpret status codes and job details in order to diagnose andtroubleshoot failed jobs.
Lesson 7: Performing File System Backups and Restores
Topic: Backup and restore job-related tips
Troubleshoot devices and media, including connectivity betweenmaster, media, and client.
Lesson 2: Managing and Optimizing Tape Storage
Topic: Media- and device-related tips
Lesson 3: Managing and Optimizing Disk Storage
Topic: Disk-related tips
Troubleshoot common issues related to Symantec NetBackupdisaster recovery including recovering the NetBackup catalog.
Lesson 9: Protecting the NetBackup Configuration
Topic: Disaster recovery strategies
Topic: Catalog-related tips
If you have questions about the Symantec Certification Program, send an email [email protected].
mailto:[email protected]:[email protected]:[email protected]:[email protected] -
8/10/2019 250-271_NBU7.5_UNIX_StudyGuide
8/8
Copyright 2012 Symantec Corporation. All rights reserved. Symantec, the Symantec Logo, and NetBackup are registered trademarks of Symantec Corporation or its affiliates in the U.S.
and other countries. Other names may be trademarks of their respective owners. Specifications and product offerings are subject to change without notice.
About Symantec
Symantec is a global leader in providing security,
storage and systems management solutions to
help consumers and organizations secure and
manage their information-driven world. Our
software and services protect against more risks at
more points, more completely and efficiently,
enabling confidence wherever information is used
or stored.
For specific country offices and
contact numbers, please visit
our Web site.
Symantec World Headquarters
350 Ellis St.
Mountain View, CA 94043 USA
+1 (650) 527 8000
1 (800) 721 3934
www.symantec.com