basic of valve
Post on 10-Nov-2014
240 Views
Preview:
DESCRIPTION
TRANSCRIPT
MAHANAKORN TRADING CO.,LTD.
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เอกสารบรรยาย Valve Technical Seminar สาหร�บ
โรงงานอ�ตสาหกรรม
MAHANAKORN TRADING CO.,LTD.
OUTLINE OF THE COMPANY NAME OF COMPANY MAHANAKORN TRADING CO.,LTD
ESTABLISHMENT 1985
CAPITALISATION Baht. 7,200,000 Paid up
MAIN BANKERS THAI MILITARY BANK PUBLIC COMPANY LIMITED DISTRIBUTORS FOR 1. TOMOE Butterfly Valves, Control valves, Actuator, Spare part
2. TOMOETRITEC triple offset valve. 3. MMA Hydronic Balancing System Products 4. REGIN HVAC Control System and Control Valves, Building Automation 5. EXOMATIC Industrial SCADA system
6. TOA General Valves Product. 7. AFA Rubber Flexible Joint.
Scope of ServicesOne Stop Shopping, Quality Product/System/Services, After Sales Service, Stockiest
Address846/5-6 Rama 3 Rd.,(Rachadaphisek),Bangklo, Bangkholaem, Bangkok 12120 ThailandTEL. 662-291-9981-8 FAX. 662-291-9990 E-Mail : mtc@cscom.com
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
MAHANAKORN TRADING CO.,LTD.
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
BANGKOK, THAILAND
HVAC. CONTROL DIVISION
INDUSTRIAL & ENGINEERING DIVISION
ส�นค้�าของ บ . มหานค้รเทรดด��ง จก . ม�จาหน�าย และให�บร�การท�!วไทย
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Stock “TOMOE” and Other, at MTC Warehouse,
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
ต�วอย�าง อ�ตสาหกรรมท�!ม�การให�บร�การ
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
-ผล�ตเหล%ก (Steel)
-ผล�ตน�าม�นปาล'ม (Palm Oil)
-ผล�ตภั�ณฑ์'ยาง (Rubber)
-โรงไฟฟ,า (Power Plant)
-ระบบน�าเส�ย (Water Treatment)
-ป-โตเค้ม� (Petrol Chemical)
-Oil & Gas
- ฯลฯ (ETC.)
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
TOMOE Company Introduction
By
Ms. Miyake
Est. 5 – 10 Mins
Tomoe ValveNovember 23, 2005
Presentation purpose only
TOMOE VALVE Company Introduction
Index
1. Company profile and history
2. Global supply chain
3. Quality control system
4. Customer support
Company profile & historySince founded in 1953 by Ikuo Yamamoto, at Osaka, Tomoe has been always leading at the front of flow control technology.
Keep top share for butterfly valves including rubber-seated & Teflon-lined butterfly valves, double-offset & triple-offset valves, pneumatic & electric actuators.
8 Manufacturing locations,
Sales offices / logistic centers in more than 30 countries.
Sales growth
0
50
100
150
200
250
300
350
1953 1960 1970 1980 1990 2000 2004 2009
Millio
n U
SD
1. Develop suitable products to meet customers requirement, with price competitiveness
2. Focus on distribution business (commodity market)
and project business (engineered products market)
Sales share by operator
MANUAL45%
PNEUMATIC38%
ELECTRIC17%
Annual production 400,000pcs
Customer base 4,000 companies
Index
1. Company profile and history
2. Global supply chain
3. Quality control system
4. Customer support
Tomoe Global Network
Production organization
Tomoe Japan
Factory for
concentric type valve
China
Factory for
concentric type valve
Factory for
eccentric type valve
UK
Factory for
concentric type valve
Factory for
eccentric type valve
Japan
Assembly
Factory
Singapore
Tomoe Global Supply Chain
•20km southeast of Singapore
•50 min from Singapore by ferry
•Land scale : 1.5 time of Singapore
バタム島
レンパン島
ガラン島
Introduction of new factory in Batam Island, Indonesia
Tomoe Global Supply Chain
Tomoe Global Supply Chain
Introduction of new factory in Batam Island, Indonesia
Tomoe Global Supply Chain
To Marke
t
Batam
UK Japan
Shanghai
Singaporeproduction and logistic
control
To Market
To Market
To Market
Index
1. Company profile and history
2. Global supply chain
3. Quality control system
4. Customer support
Pre-shipment inspection is done for all valves.
Inspection Item Applicable standard
Material inspection ASTM/J IS
Quantity inspection manufacturer's std
Visual inspection manufacturer's std
Dimensional inspection ANSI B16.42
Functional inspection manufacturer's std
Seat leak test ANSI B16.34
Body pressure test ANSI B16.34
Quality Control System
Quality Management under ISO9001
UKChina
Quality Control System
UK
Japan
Index
1. Company profile and history
2. Global supply chain
3. Quality control system
4. Customer support
Quick engineering & maintenance support
available from;•Tomoe Japan
•Tomoe Singapore
•Mahanakorn Trading Co., Ltd.
Support tool•Technical catalog in English
•Updated technical information through website
•Cv calculation software
Customer support
Valve sizing program
Tomoe own program
Customer support
Thank you
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
TVS Introduction
By
Mr.Joe
Valve solutions
• Tomoe Valve Co. Ltd established in Osaka in 1953
• European HQ in South Wales, UK from 1987, serving UK, Europe, Africa, Middle East.
• S.E Asian HQ in Singapore from 1998.
• Tomoe Tritec Ltd formed in 1998
South Wales UK
• A World leader in the designand production of butterflyvalves and actuators
TVS ORGANIZATION
Tomoe Valve S.E.A. Pte. Ltd.
Malaysia Thailand Indonesia
Mikuni Sdn. Bhd.
Vietnam
Mahanarkorn Trading PT SahabatAgung Lephuco Co.
Philippines - TVP
Pakistan
FTZ Trading
India**
Ertech Ltd.
Tomoe Singapore at Chin Bee Ave (SG)
Established in Singapore in April 1988
Location:
No. 3 Chin Bee Ave, Singapore 619928
Current Staffing:
12 people (1 GM, 3 Admin/Acct, 6 Sales, 3 Workshop)
Workshop & Hydrostatic Test machine
Regional Distributors’ Training Seminar 2003
Product rangeTriple offset valves
Rotary control valves
Ball valves Rubber lined valves
Teflon lined valvesDouble offset valves
Valve Solutions
Contacts
SINGAPORE
Address: TOMOE VALVE S.E.A. PTE. LTD.
NO.3, CHIN BEE AVENUE,
SINGAPORE 619928
Tel: (65) 6899 5060
Fax: (65) 6899 5061
E mail: sales@tomoesea.com.sg
JAPAN
Address: TOMOE VALVE CO., LTD.3-11-11 SHINMACHI
NISHI-KU,
OSAKA 550-0013, JAPAN
Tel: (81)-6-6110-2101~3
Fax: (81)-6-6448-2105/6
E mail: int-hq@tomoe.co.jp
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Valves Technical
By
K. Bowornrit
หน�าท�!หล�กของวาล'ว
หน�าท�!พื้0�นฐานของวาล'วม� 3 ประการโดยท�!วไป ค้0อ
1 .ทาหน�าท�!ป-ดก��นการไหลภัายในท�อ2. ทาหน�าท�!ค้วบค้�มของไหลภัายในท�อให�ไปในท�ศทาง
กาหนด3. ทาหน�าท�!ค้วบค้�มปร�มาณและค้วามด�นของ ของไหล
ภัายในท�อ
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
ประเภัทของวาล'วท�!ม�การใช้�งานเป4นหล�กในโรงงาน
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
1.Gate Valve (ประต5น�า)
2.Globe Valve (ก%อกวาวล')
3.Ball Valve (บอลวาวล')
4.Butterfly Valve (วาล'วป6กผ�เส0�อ)
แบ�งล�กษณะการ เป-ด/ป-ด ของ Valve แต�ละประเภัท
1. เป-ดโดยการหม�น (ข8�น-ลง )เช้�น
- Gate valve - Globe valve
2. เป-ดโดยการหม�น 90 องศา เช้�น
- Ball valve - Butterfly valve
Quarter Turn
Multi Turn
ค้�ณล�กษณะ และ ช้น�ดต�างๆ ของวาล'ว
Gate valve Globe valve
Butterfly
valveBall valve
ค้�ณล�กษณะ และ ช้น�ดต�างๆ ของวาล'ว
Butterfly valve
ภัาพื้แสดงการ เป-ด ป-ด ของ– Butterfly Valve
Stem
Disc
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
700 Series
Rubber Seat Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบขนาด,น�าหน�ก และ การใช้�เน0�อท�!ต�ดต��งท�!ม�ผลต�อการซ่�อมบาร�ง
Rubber Seat Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบน�าหน�ก ระหว�าง Gate valve ก�บ Butterfly valve
Rubber Seat Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Feature of TOMOE Rubber Seat
By
Ms. Miyake
Est. 10-15 Mins
Rubber Seat Butterfly Valve
BODY
SEAT
การทางานของซ่�ลช้น�ดต�างๆ ในบ�ตเตอร'ฟลายวาล'ว
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
BODY
SEAT
BODY
SEAT
BODY
SEAT
BODY
TOMOE SEAT
BODY
TOMOE SEAT
ซ่�ลช้น�ดหน�าเร�ยบ
ซ่�ลช้น�ดม�ส�นเหล�!ยม
ซ่�ลช้น�ดม� Curve และ ส�นด�านหล�ง
Rubber Seat Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
ม�ส�นก�น Slip อย5�ด�านหล�งทาให�การป-ดสน�ทแน�นอนท�กภัาวะการใช้�งาน
แหวนกระช้�บก�านวาล'วทาให�ไม�เก�ดการร�!วข8�นก�านวาล'วหล�งจากม�การใช้�งาน ป-ดเป-ดต�อเน0!องเป4นระยะเวลานาน
Cosine Curve ทาให�วาล'วป-ดสน�ท 100%แม�จะม�การเปล�!ยนแปลงของอ�ณหภั5ม�ตลอดเวลา อ�กท��งย�งทาให�การค้วบค้�มอ�ตราการไหลในการเป-ดหร�!ม�ประส�ทธิ�ภัาพื้เหม0อน Control valve
Disc ล��นวาล'วเป4นช้น�ดหน�าเร�ยบเพื้�!มอ�ตราการไหลได�มากกว�าทาให�ประส�ทธิ�ภัาพื้ของเค้ร0!องจ�กรทางานได�เต%มท�!ไม�ทาให�เก�ด Pressure Drop ซ่8!งม�ผลต�ออ�ปกรณ' เช้�นPump Seat ยางม�ว�สด�ให�เล0อกหลายช้น�ดเช้�น
EPDM -20 ~120 C (เหมาะสาหร�บการใช้�งานท�!วไปในโรงงาน)Hi-EPDM -30 ~ 150 C (เหมาะสาหร�บงานอ�ณหภั5ม�ส5งต�อเน0!อง)และย�งม� NBR, W-NBR, W-EPDM, Viton, Slicon ให�เล0อกตามการใช้�
ว�สด�ท�!ใช้�ในการผล�ต TOMOE วาล'ว เป4นว�สด�ท�!ม�มาตรฐานเต%มจร�งตามท�!ได�ระบ�ไว�ในสเป4ค้ ทางบร�ษ�ทม�ใบร�บรองว�สด�ประกอบการส�งของ
Rubber Seat Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
ซ่�ลช้น�ดพื้�เศษสาหร�บงาน Heavy Duty และม�การใช้�งานในขบวนการผล�ตท�!ม� Vacuum
วงแหวนเหล็กเสริ มความแข็งแริงก�นการิยุ�บตั�วข็องยุางในภาวะส�ญญากาศส�วนอ��น กยุ�งคงม ล็�กษณะพิ เศษที่ �เหมาะสมก�บการิใช้&งาน Heavy Duty ในอ�ตัสาหกริริม
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Rubber Seat Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Seat ของ 731P ม�ผลทาให� Flow เพื้�!ม
NEW
Rubber Seat Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
CV Value/Pressure lost coefficient
2 Pcs. Stem, Disc หน�าเร�ยบ (700G,702Z,773Z)
1 Pcs. Stem (700S,732X,720F)At Dia.100mm.Full open CV=900 Pressure loss = 0.3 At Dia.100mm.Full open CV=450 Pressure loss = 1.5
Rubber Seat Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
800 Series
Teflon Lined Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบ กลไกการซ่�ลของวาล'ว Teflon ท�!วไป ก�บ 847T
Teflon Lined Butterfly Valve
Teflon Lined Butterfly Valveเปร�ยบเท�ยบ กลไกการซ่�ลของวาล'ว Teflon ท�!วไป ก�บ 847T
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
• HCL• HNO3• H2SO4• Chlorinated Brine• Chlorinated Organics• Bleach• Herbicides
• Pesticides• Solvents• White Liquor• Wet Chlorine• Electric Galvanizing
Solution• Sodium Chlorate• Treated Water (Oil
Free)
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
สารเค้ม�ก�ดกร�อนส5งช้น�ดต�างๆท�!วไป ท�!ใช้�ก�บ 847T
Teflon Lined Butterfly Valve
• High Tension Coil Spring
• Minimum 3mm Teflon Lining Thickness
• No special Gasket needed
• Total Sealing
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
ค้�ณสมบ�ต�พื้�เศษเฉพื้าะ TOMOE 847T
Teflon Lined Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Pressure & Temperature (P/T Rating) TOMOE 847T
Teflon Lined Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบการเค้ล0อบ Teflon ท�!ส�วนสาค้�ญ เช้�น Disc ของ TOMOE 847T
Teflon Lined Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
ค้วามทนทานต�อการใช้�งาน ของ TOMOE 847T เท�ยบ Pressure/Heat Cycles
Teflon Lined Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
300 Series
High Performance Butterfly Valve
HPBV Butterfly Valveทฤษฏี�ของ วาล'ว (Double Offset), High
Performance Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Single Offset at Full Shut (ป-ดส�ด)
Single Offset at Full Open (เป-ดส�ด)
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Double Offset at Full Shut (ป-ดส�ด)
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Double Offset at Full Open (เป-ดส�ด)
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Triple Offset at Full Shut (ป-ดส�ด)
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Triple Offset at Full Open (เป-ดส�ด)
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบร5ปแบบของ Metal VS. Teflon Seat
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบ ร5ปแบบ Metal seat แบบต�างๆซ่8!งง�ายต�อการเส�ยร5ปทรงเม0!อผ�านการใช้�งาน
K-LOK Neles LJM Hi-Seal
Metal Seat
Retainer
Body
Disc
Metal Seat
Disc
Retainer
Body
Disc
Retainer
Metal SeatBody
Spacer
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบอ�ตราการร�!วมาตรฐานของ Metal VS. Teflon Seat
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบร5ปแบบของ Metal ช้น�ดพื้�เศษใน Model 337Y
HPBV Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
500 Series
Rotary Flow Control Butterfly Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
กราฟแสดง Character ท�!สาค้�ญ ของ Control Valves
Rotary Flow Control Valve
CV.
100
100%50%0
50
Opening %
Quick Opening
Linear
Equal %
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
ต�วอย�างการเก�ด Cavitations และ Erosions
Rotary Flow Control Valve
ErosionsCavitations
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
ต�วอย�างการเก�ด Cavitations ใน ขณะหร�!วาล'ว
Rotary Flow Control Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
507V ถู5กออกแบบมาเพื้0!อค้วบค้�มอ�ตราการไหลท�!แม�นยากว�า วาล'วค้วบค้�มท�!วไป
Rotary Flow Control Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
เปร�ยบเท�ยบส�ดส�วนของ ขนาด/น�าหน�ก ระหว�าง 507V ก�บ วาล'ว ท�!วไป
Rotary Flow Control Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
507V สามารถูเร�!มทาการค้วบค้�มอ�ตราการไหลต��งแต�เร�!มม�การเป-ดของล��นวาล'ว ทาให�ช้�วงการค้วบค้�มม�กว�างกว�า
วาล'วผ�เส0�ออ0!นๆ
Rotary Flow Control Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
507V ม�เส�ยงในขณะทางานเพื้�ยง 5 –-10 Decibel เท�าน��น
Rotary Flow Control Valve
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
The Automatic Actuator
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Actuator ท�! สามารถู Up-Grade Accessories เพื้�!มเต�มได� (Direct mounting)
The Automatic Actuator System
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
Actuator ท�! สามารถู Up-Grade Accessories เพื้�!มเต�มได� (Direct mounting)
The Automatic Actuator System
- Standard
- Add-On Cams
- Add-On S/W
- Add-On Servo
ค้�ณล�กษณะพื้�เศษ-ใช้� PC. Board
-ใช้� O-Ring แทน ปะเก%น (IP65)
-ม� ม0อหม�นฉ�กเฉ�น พื้ร�อมช้�ดค้ล�ช้ท'-ต�วโช้ว'ตาแหน�ง ป-ด-เป-ด ขนาดใหญ�
ตารางเปร�ยบเท�ยบค้�ณสมบ�ต�ของวาล'วประต�างๆค�ณสมบ�ตั บอล็วาล็'ว บ�ตัเตัอริ'ฟล็ายุวาล็'ว เกตัวาล็'ว โ กล็*บวาล็'ว ปล็�,กวาล็'ว สว งเช้ควาล็'ว
กริณ ใ ช้&ก�นการิไ หล็กล็�บข็อง ข็องเหล็ว P P P P P Gกริณ ข็องเหล็วม การิตักตัะกอนหริ�อสาริแข็วงล็อยุ F G P P F Pกริณ ข็องเหล็วม การิก�ดกริ�อน G G F,G F F,P Gกริณ ข็องเหล็วม อ�ณหภ/ม ตั0�า G G P G P Gกริณ ใ ช้&ก�บแก*ส G G P P G G,Fกริณ ที่ � ข็องเหล็วม ความแตักตั�างข็องความด�นส/ง P P P G P Pใ ช้&ควบค�มปริ มาณการิไ หล็มากๆ G G G P G Gกริณ ข็องเหล็วม ความด�นส/ง G G,F P G P Pกริณ ข็องเหล็วม อ�ณหภ/ม ส/ง G G G G P Gกริณ ข็องเหล็วม ปริ มาณการิริ� �วไ หล็ตั0�า G G P P G Gกริณ ตั&องการิใ ช้&แริงการิหม�นน&อยุ G G P P G Gกริณ ตั&องการิตั&นที่�นตั0�า F G F P F Pกริณ ที่ � ข็องเหล็วม ความแตักตั�างข็องความด�นตั0�า G G G F G Gใ ช้&ควบค�มปริ มาณการิไ หล็น&อยุ P G P F P Gกริณ ตั&องการิใ ห&ม การิเป2ดป2ดอยุ�างริวดเริว G G P P G Gกริณ ใ ช้&เพิ��อริะบายุความด�น G G,F P P P Pกริณ ใ ช้&เป3นวาล็'วน ริภ�ยุ P G P P P Pกริณ ตั&องการิป4องก�นการิก�ดกริ�อนที่ � บ�าวาล็'ว P G P P P Pกริณ ที่ � ข็องเหล็วม สาริแข็วงล็อยุ F,G G P P P Pกริณ ที่ �ตั&องการิวาล็'วข็นาดเล็ก G G P P G Gกริณ ใ ช้&ก�บไ อน05า G G P G P Pกริณ ที่ �ตั&องการิหริ � P G P F P Pกริริ ที่ � ไ ม�ม การิส��นสะ เที่�อน F G P P F P
G = GOOD (ด ) , F = FAIR (ใ ช้&ไ ด&) , P = POOR (ไ ม�ด )
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
IET. Division / MAHANAKORN TRADING CO.,LTD Tel:02-2919981-8
TOMOE Ball Valves Presentation
By Mr. Joe,
( ! May Be with MTC Translator)
Est. 40 - 60 Mins
TOMOE BALL VALVE
FEATURES Direct Mounting (ISO5211) for easy
automation Triple Seals Packing (Design In
Compliance to TA-Luft Standard) Live Load Packing with the use of
Belleville washer ensures seal integrity and extended valve life
Low Torques are achieved with special design seat of TFM1600*; allowing low and stable torques. All 2, 3 & 4 series Ball Valves are supplied with TFM® seats as standard, reducing the need for multiple seat options.
Anti-Static Device – eliminates static electrical buildup between Stem, Ball and Body.
Blow Out Proof Stem
Pressure Balance Hole – pressure cavity is relieved through the hole in the ball slot.
Solid Ball
Investment Casting
Fire Safe to API 607 4th Edition (Optional)
INVESTMENT CASTING
Casting is approved to AD-W0/TRD100. By meeting these stringent casting requirements, the TOMOE Ball Valve matches the high quality standards as it reputable Butterfly Valves.
Stainless steel is one of the most common investment casting materials. This is primarily due to the expense of the raw material. Investment castings can produce near net shapes with very little secondary operations required. This allows very little waste of raw material; thus reducing overall costs. Whereas machining a similar part can produce significant waste depending on the part, greatly increasing overall cost.
ISO 5211 Direct Mount
ISO 5211 mounting pad makes installation on TOMOE Ball Valves and mounting of actuators simple and economical.
Triple Stem Seal Mechanism/Blow Out Proof
Anti-Blow Off Feature
1st Sealing
2nd Sealing
3rd Sealing
Stems are back-seated and therefore blowout proof. And they provide metal-to-metal backup sealing in the event of a fire. This secondary metal-to-metal sealing is also provided internally behind the seat area.
LIVE LOADING GLAND
Belleville Washers with Locking Nut cover to prevent loosening of gland nut due to vibration; providing maximum stem sealing performance even on high cycle applications.
LIVE LOADING GLAND (II)
Stem Packing
•Adjustable V-ring design allows multiple sealing between stem & body.
•Multiple packing rings provides high life cycle.
•Thrust Bearing and Washers provide secondary seal; reducing torque and galling.
Low And Stable Operating Torque –TFM1600 Seat Material
Surface Area that Is in contact with the ball’s surface and the pressure acting on the surfacewill contribute to the torque requirement of the valve. Smaller Surface area will result in lower torque
TFM 1600 Seat materialbeing stronger is subject to lesser wear and tear.This will give a more stableSurface area of contact, resulting in a stable operatingTorque.
The shape of the seatachieved a low operating Torque.
ADVANTAGES OF TFM1600
• Exceptional Chemical Resistance
• Exceptional Thermal Resistance
• Reduced Deformation Under Load
• Low Friction
• High Dimensional Stability
• Exceptionally Smooth Surfaces
TFM 1600 is a second generation modified PolyTetraFluro-Ethylene (PTFE). With lesser than 1% of the same modifier(PPVE-Perfluropropyl vinyl ether) incorporates as in PFA.
TFM1600 is still classified as a homo-polymer under ISO 12086.
Type of Teflon(1) Fluoropolymer TFE : This is a polymer
named “Teflon” which was first developed by Du Pont Corporation. This white opaque material does not flow at a temperature exceeding its melting point of 327°C. This characteristic feature allows a calcination after a preliminary molding by a process similar to sintering. This method is not applicable to a product having a complicated form, where machining is usually required for a precise finish.
Type of Teflon(2) Flouropolymer PFA : This is the newer type of
“Teflon”. Heat-resistant and easy for molding: A transfer molding for a large product and an injection molding for a small size. PFA as well as FEP is hot melt molded into a semitransparent product. The semi-transparency enables you to see through the core of molding and also see pin holes, voids or other defects if any. The polymer of this type has similar structure to TFE with an O–Rf replacing a fluorine atom (The Rf represents per-fluoroalkylate). The O–Rf gives a property of allowing hot melt molding.
Type of Teflon(3) TFM 1600 is a second generation
modified PolyTetraFluro-Ethylene (PTFE). With lesser than 1% of the same modifier (PPVE-Perfluropropyl vinyl ether) incorporates as in PFA.TFM1600 is still classified as a homo-polymer under ISO 12086
SEAT DESIGN
•TFM 1600 resilient seats are offered as standard.
•This ensures bi-directional, bubble-tight sealing and simultaneously provides the lowest possible torque.
•The seat slots help to relieve pressure past the upstream seat.
•This design lowers the friction, seat wear and operating torque.
•TOMOE designed the seat curvatures to minimize contact forces between the ball and seat when in open position.
•This design again helps to lower the friction, seat wear and operating torque.
Anti-Static Device
Meet the Basic Requirement for Petrochemical /Oil & Gas
Pressure Balance/Solid Ball Pressure Balance HoleTo ReleaseCavitiesPressureBuild-up
Solid Ball For Full Range Of Valve Size
•TOMOE offers precision machined, solid, stainless steel ball that is mirror finished for bubble-tight shut-off and reduced operating torque.
•The critical ball edge has blended curvatures for reduced seat wear and enhances high cycle life.
•The hole in the stem slot is an added safety feature. It allows the pressure between the body cavity and the line media to equalize when in open position.
Fire Safe Design & Construction
Design & Standards
Design ASME B16.34 / API 608
End Flange ASME B16.5 / JIS B2238
Face to Face ASME B16.10 / JIS B2002
Wall Thickness ASME B16.34
Inspection & Testing
API 598 / JIS B2003
Fire Safe API 607 4th Edition (Option)
*Graph and Info Extracted from www.dynafluo.com
TEMPERATURE VS DEFORMATION GRAPH
PRESSURE-TEMPERATURE GRAPH (FLANGE ENDS)
Pressure psi
CFTemperature° (° )
(38)
200
1000-20(-18)(-29)
100
300
400
500
600
300200(93) (149)
F500°400(260)°(204) C
Pressure-Temperature Ratings
800
700
FB:1/2"to8"
FKM O-ring
PRESSURE- TEMPERATURE GRAPH (SCREW ENDS)
900
(315)°600°500°400 F200 3000-20 100
Temperature° (° )(38)(-29)(-18) (93)
F(149)
C(204) (260)°C
Pressure psi
200
100
300
400
500
600
800
700
FC
FB:1/2"to4" Pressure-Temperature Ratings
1100
1000
Screw End
FKM O-ring
PTFE seat
1/4" - 2"
21/2" - 4"
Product Range
MATERIAL
• STAINLESS STEEL 316;
• STAINLESS STEEL 304;
• CARBON STEEL WCB.
CONSTRUCTION
• THREADED ENDS TO BSP & NPT;
• SOCKET ENDS;
• BUTT WELD ENDS;
• FLANGE ENDS TO ANSI #150, #300, JIS 10K, 20K WITH ISO 5211 DIRECT & PAD MOUNT
SIZE
½” – 4” (FOR THREADED ENDS)
½” – 8” (FOR FLANGE ENDS)
Target Industries
Water Works / Industries Chemical General Industries Petrol-Chemical Pulp & Paper Oil, Gas & Steam Contractors of various industries
Value Add of TOMOE
TOMOE SEA has trained
and knowledgeable
sales, technical support personnel and authorized distributors.
Test Rigs For Ball Valve (Threaded & Flanged)
Fabrication Capabilities of Customized Bracketry
High Stocks Level.
• Job References– Sumitomo Chemicals (SCEC) – SMAG Plant– Rotary Engineering – In-House Training Skit– Kuritec – Water Treatment – AFPD – Emerson (Elomatic Spore) – package in a
Germany project– Emerson (Elomatic Spore) – package for air
vessel isolation– Sugar Mills – Philippines– Palm Oil Industries – Johore Bahru, M’sia– Toyota, Motor oil process - Vietnam
top related