papsa odu firmware update models: papsa basic, papsa plus, papsa pro feeder cable update port...

PAPSA ODU FIRMWARE UPDATE

Models: PAPSA BASIC , PAPSA PLUS , PAPSA PRO

FEEDER CA-BLE

UPDATE PORT

RS-232C Cable or232C to USB Gen-der

1. Connect to update port with RS-232C Cable or 232CtoUSB Gender.

PAPSA ODU FIRMWARE UPDATE2. Start Firmware Update Program.

3. Choose hex file for ODU and open.

4. Choose Com Port.

5. ODU Power on will automatically rewrite the software.

IDU FIRMWARE UPDATE

Model: PAPSA PRO IDU , MOBILE IDU

POWER CA-BLE

UPDATE PORT RS-232C Cable or

232C to USB Gen-der

1. Connect to update port with RS-232C Cable or 232CtoUSB Gender. .

IDU FIRMWARE UPDATE2. Start Firmware Update Program.

3. Choose hex file for ODU and open.

4. Choose Com Port.

5. ODU Power on will automatically rewrite the software.

MOBILE ODU FIRMWARE UPDATE

Model: MOBILE ODU

UPDATE PORT AVR ISP DOWNLOADER

1. Connect with update port AVR ISP down loader.

MOBILE ODU FIRMWARE UPDATE

2. Please disconnect with the motor cable and start AVR ISP Program.

3. Choose cancel.

MOBILE ODU FIRMWARE UPDATE

4. MOBILE POWER ON and click AVR ICON. 5. Choose from main tab for DEVICE and choose ATMEGA128.

MOBILE ODU FIRMWARE UPDATE

6. Choose from program tab for your target Mo-bile ODU HEX FILE.

7. Please go to Auto TAB and check same set up as below picture and click start.