8/12/2019 AP B11

1/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.327 UT Thickness of Floor Plates (annular Plate +

Central Plate + Sumps); 12 points per plate

LS -

9.328 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corrodedor suspected Floor plates; 100%

LS -

9.329 WFMPI of Welds, Shell to Bottom Plate Welds (

Internal of Tank); 100%

LS -

9.330 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.331 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.332 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.333 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs9.334 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.335 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.336 Inspection of wire mesh of fixed roof vents; 100% LS -

9.337 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.338 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs

9.339 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. ( 4 directions per point )

LS -

9.340 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. ( 4 directions

per point )

LS -

2403F (CRT)

9.341 Visual Inpection of complete tank , internally &

Externally along with attachments; 100%

LS -

Shell NDTs

9.342 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.343 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

TOTAL CARRIED TO COLLECTION - PAGE SP/106

SP/33

8/12/2019 AP B11

2/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.344 UT Thickness of Floor Plates (annular Plate +

Central Plate + Sumps); 12 points per plate

LS -

9.345 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corroded

or suspected Floor plates; 100%

LS -

9.346 WFMPI of Welds, Shell to Bottom Plate Welds (

Internal of Tank); 100%

LS -

9.347 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.348 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.349 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.350 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs9.351 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.352 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.353 Inspection of wire mesh of fixed roof vents; 100% LS -

9.354 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.355 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs

9.356 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. ( 4 directions per point )

LS -

9.357 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. (4 directions

per point )

LS -

4710F (CRT)

9.358 Visual Inpection of complete tank , internally &Externally along with attachments; 100% LS-

Shell NDTs

9.359 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.360 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-TOTAL CARRIED TO COLLECTION - PAGE SP/106

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

SP/34

8/12/2019 AP B11

3/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.361 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corroded

or suspected Floor plates; 100%

LS -

9.362 WFMPI of Welds, Shell to Bottom Plate Welds (Internal of Tank); 100%

LS -

9.363 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.364 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.365 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.366 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs

9.367 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.368 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.369 Inspection of wire mesh of fixed roof vents; 100% LS -

9.370 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.371 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs9.372 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. ( 4 directions per point )

LS -

9.373 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. (4 directions

per point )

LS -

4710FA (CRT)

9.374 Visual Inpection of complete tank , internally &

Externally along with attachments; 100%

LS -

Shell NDTs

9.375 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.376 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-TOTAL CARRIED TO COLLECTION - PAGE SP/106

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

SP/35

8/12/2019 AP B11

4/10

8/12/2019 AP B11

5/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.393 UT Thickness of Floor Plates (annular Plate +

Central Plate + Sumps); 12 points per plate

LS -

9.394 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corrodedor suspected Floor plates; 100%

LS -

9.395 WFMPI of Welds, Shell to Bottom Plate Welds (

Internal of Tank); 100%

LS -

9.396 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.397 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.398 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.399 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs9.400 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.401 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.402 Inspection of wire mesh of fixed roof vents; 100% LS -

9.403 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.404 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs

9.405 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. ( 4 directions per point )

LS -

9.406 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. ( 4 directions

per point )

LS -

5102FA (CRT)

9.407 Visual Inpection of complete tank , internally &

Externally along with attachments; 100%

LS -

Shell NDTs

9.408 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.409 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

TOTAL CARRIED TO COLLECTION - PAGE SP/106

SP/37

8/12/2019 AP B11

6/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.410 UT Thickness of Floor Plates (annular Plate +

Central Plate + Sumps); 12 points per plate

LS -

9.411 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corrodedor suspected Floor plates; 100%

LS -

9.412 WFMPI of Welds, Shell to Bottom Plate Welds (

Internal of Tank); 100%

LS -

9.413 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.414 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.415 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.416 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs9.417 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.418 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.419 Inspection of wire mesh of fixed roof vents; 100% LS -

9.420 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.421 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs

9.422 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. (4 directions per point)

LS -

9.423 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. ( 4 directions

per point )

LS -

5102FB (CRT)

9.424 Visual Inpection of complete tank , internally &

Externally along with attachments; 100%

LS -

Shell NDTs

9.425 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.426 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-TOTAL CARRIED TO COLLECTION - PAGE SP/106

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

SP/38

8/12/2019 AP B11

7/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.427 UT Thickness of Floor Plates (annular Plate +

Central Plate + Sumps); 12 points per plate

LS -

9.428 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corroded

or suspected Floor plates; 100%

LS -

9.429 WFMPI of Welds, Shell to Bottom Plate Welds

(Internal of Tank); 100%

LS -

9.430 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.431 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.432 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.433 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs9.434 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.435 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.436 Inspection of wire mesh of fixed roof vents; 100% LS -

9.437 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.438 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs

9.439 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. ( 4 directions per point )

LS -

9.440 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. ( 4 directions

per point )

LS -

5109F (CRT)

9.441 Visual Inpection of complete tank , internally &

Externally along with attachments; 100%

LS -

Shell NDTs

9.442 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.443 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

TOTAL CARRIED TO COLLECTION - PAGE SP/106

SP/39

8/12/2019 AP B11

8/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.444 UT Thickness of Floor Plates (annular Plate +

Central Plate + Sumps); 12 points per plate

LS -

9.445 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corrodedor suspected Floor plates; 100%

LS -

9.446 WFMPI of Welds, Shell to Bottom Plate Welds (

Internal of Tank); 100%

LS -

9.447 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.448 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.449 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.450 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs9.451 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.452 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.453 Inspection of wire mesh of fixed roof vents; 100% LS -

9.454 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.455 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs

9.456 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. ( 4 directions per point )

LS -

9.457 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. ( 4 directions

per point )

LS -

5111F (CRT)

9.458 Visual Inpection of complete tank , internally &

Externally along with attachments; 100%

LS -

Shell NDTs

9.459 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.460 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

TOTAL CARRIED TO COLLECTION - PAGE SP/106

SP/40

8/12/2019 AP B11

9/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.461 UT Thickness of Floor Plates (annular Plate +

Central Plate + Sumps); 12 points per plate

LS -

9.462 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corrodedor suspected Floor plates; 100%

LS -

9.463 WFMPI of Welds, Shell to Bottom Plate Welds (

Internal of Tank); 100%

LS -

9.464 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.465 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.466 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.467 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs9.468 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.469 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.470 Inspection of wire mesh of fixed roof vents; 100% LS -

9.471 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.472 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs

9.473 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. ( 4 directions per point )

LS -

9.474 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. ( 4 directions

per point )

LS -

5111FA (CRT)

9.475 Visual Inpection of complete tank , internally &

Externally along with attachments; 100%

LS -

Shell NDTs

9.476 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.477 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-TOTAL CARRIED TO COLLECTION - PAGE SP/106

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

SP/41

8/12/2019 AP B11

10/10

APPENDIX - B - SCHEDULE OF PRICES

ITEM

No.

DESCRIPTION QTY. UNIT RATE

(QR.)

AMOUNT

(QR.)

Bottom Plate NDTs

9.478 UT Thickness of Floor Plates (annular Plate +

Central Plate + Sumps); 12 points per plate

LS -

9.479 Vacuum Test of all Welds of Floor Plates Welds

including Shell to bottom Plate Welds + Corrodedor suspected Floor plates; 100%

LS -

9.480 WFMPI of Welds, Shell to Bottom Plate Welds (

Internal of Tank); 100%

LS -

9.481 MPI of Welds, Shell to Bottom Plate Welds

(External of Tank); 100%

LS -

9.482 WFMPI of Welds, Bottom Plate sump; 100% LS -

9.483 MFL, Floor Plates (annular Plate + Central Plate);

100%

LS -

9.484 Visual inspection of Civil Foundation; 100% LS -

Fixed Roof NDTs9.485 Thickness Measurement of Fixed Roof - Plates; 12

points per plate

LS -

9.486 Vacuum test of Fixed Roof - Plate Welds +

Corroded or suspected roof plates; 100%

LS -

9.487 Inspection of wire mesh of fixed roof vents; 100% LS -

9.488 Verticality Check of Fixed Roof - Gauge Hatch

Pipe; 100%

LS -

9.489 Thickness Measurement of Internal Structure; 1

Thickness point ( 4 directions per point ) every 5

mts.

LS -

Miscellaneous NDTs

9.490 Thickness gauging of Fire Water Line; 1 thickens

point every 5 mts. (4 directions per point)

LS -

9.491 Thickens gauging of Foam Water Line- Foam

Pourers; 1 thickens point every 5 mts. (4 directions

per point)

LS -

2102FA (DRT)

9.492 Visual Inpection of complete tank , internally &

Externally along with attachments; 100%

LS -

Shell NDTs

9.493 Thickness measurement of Shell - UT Thickness;

12 points per Plate each on East, West , North &

South Sides

LS -

9.494 Thickness measurement of Shell - UT Thickness; 4

points per nozzle, supports as per format

LS -

-TOTAL CARRIED TO COLLECTION - PAGE SP/106

SCHEDULE NO. 9 NON DESTRUCTIVE TESTS (NDT)

SP/42