ballvalvea2-05 (1)
TRANSCRIPT
-
7/27/2019 BallValveA2-05 (1)
1/44
Ball Valves
Catalogue No
DHV Industries, Inc.
3451 Pegasus Drive
Bakersfield, CA 93308 U.S.A.
Call Toll Free: (877) DHV-USA1
Phone: (661) 392-8948
Fax: (661) 392-8947
E-mail: [email protected]
Website: www.dhvindustries.com
DHV Valve Company Inc.
10810 W. Little York, Suite 120
Houston, TX. 77041 U.S.A.
Phone: (713) 983-6046
Fax: (713) 983-9076
E-mail: [email protected]
Website: www.dhvvalve.com
-
7/27/2019 BallValveA2-05 (1)
2/44
DHV Industries, Inc.
DHV Figure Numbers 2
Floating Ball Valves 3
One-piece Body Ball Valves 3
Two-piece Body Ball Valves 5
Small Size Ball Valves 7
Three Way Ball Valves 10
Trunnion Mounted Ball Valves 11
Two-Piece Cast Steel Body Ball Valves 12
Three-Piece Forged Steel Body Ball Valves 19
Side Entry Type SE-1 19
Side Entry Type SE-3 21
One-piece Cast Steel Body Top Entry Ball Valves 30
Fully Welded Ball Valves 36
Rising Stem Ball Valves 39
Terms & Conditions 42
Table of Contents
1
Introduction
Quality is our commitment, while competitive price and timely delivery is our promise.
From the beginning, the DHV name has become associated with quality in every step of our
manufacturing process. For the past decades our customers worldwide have trusted us to pro-
vide them with consistent and reliable valve products in their most severe and critical service.
We at DHV are proud of our ability to meet the stringent requirements of Refining, Gas/Oil, Pipeline,
Petrochemical and Power Plant.
DHVBall Valves are designed, manufactured and tested to the latest manufacturing specifica-
tions of the American & International Standards Organizations. We welcome your challenges and
look forward to serving your critical project needs.
-
7/27/2019 BallValveA2-05 (1)
3/44
DHV Industries, Inc.
DHV Figure Numbers
2
E x a m p l e : 8 - B 5 6 0 1 F 1 3 - G O
8 Ball Valve, Trunnion Ball,
Three - Piece Body, Full Bore, Class
600LB, A105 Body & Adapter Raised
Face Flanged End, with A105 + ENP
Trim and Nylon + Viton / Graphite
Seat and Seal, Gear Operated.
Type
1 = Floating Ball Split Body,
Full Bore
2 = Floating Ball Split Body,Reduced Bore
3 = Trunnion Ball Two-Piece Body,
Full Bore
4 = Trunnion Ball Two-Piece Body,
Reduced Bore
5 = Trunnion Ball Three-Piece Body,
Full Bore
6 =Trunnion Ball Three-Piece Body,
Reduced Bore
7 = Floating Ball One-Piece Body,
Reduced Bore
8 = Small Size Ball Valves9 = Top Entry Trunnion Ball Valves
0 = Three Way Ball Valves
A = Metal-to-Metal Seat Ball Valves
C = Full Welded Body Ball Valves
D = Rising Stem Ball Valves, Full Bore
E = Rising Stem Ball Valves, Reduced Bore
X = Special
Pressure Class
15 = Class 15030 = Class 300
60 = Class 600
90 = Class 900
150 = Class 1500
250 = Class 2500
10 = 1000 WOG
20 = 2000 WOG
30 = 3000 WOGCode
C = Cast Steel Valves
F = Forged Steel Valves
I = Cast Iron Valves
B = Ball Valves
End Connections
F = Raised Face Flanged End
R = Ring Type Joint Flanged End
P = Plain Flat Face Flanged End
B = Butt-welded End
T = Threaded EndS = Socked-Welded End
X = Other Type End Connection
Trim Material
1 = C.S. +ENP
2 = 304SS
3 = 316SS
4 = 13Cr / F6
5 = Duplex S.S.
6 = Monel
7 = Inconel
8 = B16
9 = B62
0 = S.S.+T.C
A = S.S.+SFNi
B = S.S.+HCr
C = Super Duplex S.S.
X = Special
Seat Material
1 = PTFE
2 = R-PTFE
3 = NYLON
4 = VITON
5 = DEVLON
6 = NBR
7 = PEEK (HT4)
8 = SFNi
9 = STL
A = HCr
B = T.C
M = NYLON-M
X = Special
Operator
NONE = Lever or Handwheel
Operator
CO = Chain Wheel Operator
GO = Gear Operator
BS = Bare Stem
EM = Electric Motor Operator
PA = Pneumatic Actuator
HA = Hydraulic Actuator
PH = Pneumatic-Hydraulic
Actuator
Body Material
0 = ASTM A216 WCB
1 = ASTM A105
2 = ASTM A352 LCB
3 = ASTM A350 LF2
4 = ASTM A351 CF8M
5 = ASTM A182 F316
6 = ASTM A351 CF8
7 = ASTM A182 F304
8 = ASTM A890 4A
9 = ASTM A182 F51
A = ASTM A352 LCC
B = Inconel
C = Monel
D = Super Duplex S.S.X = Special
Ball Valves
-
7/27/2019 BallValveA2-05 (1)
4/44
DHV Industries, Inc.3
Floating Ball Valves
Material Specification
No. Part Name Carbon Steel Stainless Steel No. Part Name Material
1 Body ASTM A216 WCB ASTM A351 CF8M 11 Body Gasket Virgin PTFE / Graphite
2 Insert ASTM A216 WCB ASTM A351 CF8M 12 Lock Plate AISI 304
3 Ball ASTM A351 CF8M 13 Snap Ring Stainless Steel
4 Stem Subassembly ASTM A276-316 14 Gland Bolt ASTM A193 B7M
5 Gland ASTM A351 CF8 17 Handle Ductile Iron
6 Seat Glass Filled PTFE 18 Name Plate Stainless Steel
7 Stem Bearing Metal Backed PTFE 19 Drive Screw Stainless Steel
8 Thrust Washer Metal Backed PTFE 20 Handle Adapter Ductile Iron
9 Gland Bushing PTFE 21 Handle Pipe Carbon Steel
10 Stem Packing PTFE / Graphite 22 Hex Bolt Carbon Steel
One-Piece Body Class 150 / 30
No. 20 21 22 are used on 6 and larger valves.
-
7/27/2019 BallValveA2-05 (1)
5/44
DHV Industries, Inc. 4
Design Features
One-piece Body
With Anti-static Device
Blow-out proof stem, Low Emission
1/2-6 Lever operation
8-10 Optional gear operation
Manufacturing to NACE MR0175 and MR0103 on request
Specifications
Basic Design: ANSI B16.34 BS 5351
Face to Face: ANSI B16.10 SHORT PATTERN
End Flanged: ANSI B16.5 Test and Inspection: API-598, API 608
Fire-safe Design/Test: API 607
Floating Ball ValvesOne-Piece Body Class 150 / 300
Dimensions Class 150
Size 1/2 3/4 1 11/2 2 3 4 6 8 10
Ainch 0.39 0.49 0.67 1.18 1.5 2.28 3.0 4.49 6.0 7.36
mm 9.91 12.4 17 30 38.1 57.9 76.2 114 152 186.9
Binch 0.59 0.79 0.98 1.57 2.0 3.0 4.0 6.0 8.0 10
mm 15 20.1 24.9 39.9 50.8 76.2 102 152 203 254
Linch 4.25 4.62 5 6.5 7 8 9.0 10.5 11.5 13
mm 108 117 127 165 178 203 229 267 292 330.2
Hinch 2.08 2.08 2.65 3.32 4.11 5.72 6.29 8.13 9.98 11.46
mm 52.8 52.8 67.3 84.3 104 145 160 207 253 291.1
Cinch 4.5 5.2 5.2 6.4 9.00 15.9 15.9 17.5 43.0 59
mm 114 132 132 163 229 404 404 445 1092 1499
weight (lb) 4 6 7 13 20 35 61 110 183 353
Dimensions Class 300
Size 1/2 3/4 1 11/2 2 3 4 6 8
Ainch 0.39 0.49 0.67 1.18 1.5 2.3 3.0 4.49 6.0
mm 9.91 12.4 17 30 38.1 57.9 76.2 114 152
Binch 0.59 0.79 0.98 1.57 2.0 3.0 4.0 6.0 8.0
mm 15 20.1 24.9 39.9 50.8 76.2 102 152 203
Linch 5.5 6 6.5 7.5 8.5 11.1 12.0 15.9 16.5
mm 140 152 165 191 216 282 305 403 419
Hinch 3.58 3.66 4.09 3.82 4.09 5.71 6.29 10 11.4
mm 90.9 93 104 97 104 145 160 254 289
Cinch 4.5 5.2 5.2 6.4 9.00 15.9 15.9 29 43.0
mm 114 132 132 163 229 404 404 737 1092
weight (lb) 6 10 11 19 26 52 86 143 309
-
7/27/2019 BallValveA2-05 (1)
6/44
DHV Industries, Inc.5
Design Features
Two-piece Body
With Anti-static Device
Blow-out proof stem, Low Emission
1/2-6 Lever operation
8-12 Gear operation
Manufacturing to NACE MR0175 and MR0103 on request
Specifications
Basic Design: ANSI B16.34 BS 5351
Face to Face: ANSI B16.10 LONG PATTERN
End Flanged: ANSI B16.5
Test and Inspection: API-598, API 608
Fire-safe Design/Test: API 607
Floating Ball ValvesTwo-Piece Body Class 150 - 150
Material Specification
Material Standard Material Standard
No.Standard
Carbon Steel Stainless Steel No.Standard
Carbon Steel Stainless St
Parts to ASTM to ASTM Parts to ASTM to ASTM
1 Body A216-WCB A351-CF8 / CF8M 9 Stem Bearing Metal Backed PTFE / Graphit
2 Body Cap A216-WCB A351-CF8 / CF8M 10 Gland Bolt A105, 1035
3 Stem A276-316 / 304 / 410 A276 - 304 / 316 11 Stud A193-B7 A193-B8
4 Gland A276-410 / 304 / 316 / A105+ENP A276 - 304 / 316 12 Nut A194-2H A194-8
5 Ball A216-WCB+ENP / A351-CF8M / CF8 A276-304 / 316 / A351-CF8M / CF8 13 Thrust Washer Metal Backed PTFE / Graphit
6 Flange A216 - WCB A351-CF8 / CF8M 14 Spring A276-302 A276-302 / 3
7 Stem Packing PTFE / Graphite PTFE / Graphite15 Seat
PTFE / Graphite / Metal Backed ST
8 Gasket PTFE / Graphite PTFE / Graphite Metal Backed Rubber
* Class 150LB & 300LB Reduced Bore are Short Pattern.
-
7/27/2019 BallValveA2-05 (1)
7/44
DHV Industries, Inc. 6
Floating Ball ValvesTwo-Piece Body Class 150 - 1500
NPS 1/2-3 NPS 4-6 NPS 8-12
Dimensions and weights
*
Gear operator is optional for these sizes.
Class 150NPS 1/2 3/4 1 11/2 2X11/2 2 21/2X2 21/2 3X21/2 3 4 X3 4 5 6 X4 6 8 X6 8 10 X8* 10* 12X10* 12
Bore in 1/2 3/4 1 11/2 11/2 2 2 2 1/2 2 1/2 3 3 4 5 4 6 6 8 8 10 10 12Size mm 13 19 25 38 38 51 51 64 64 76 76 102 127 102 152 152 203 203 254 254 305
Lin 4.25 4.62 5.00 6.50 7.00 7.00 7.50 7.50 8.00 8.00 9.00 9.00 14.00 10.50 15.50 11.50 18.00 13.00 21.00 14.00 24.0
mm 108 117 127 165 178 178 190 190 203 203 229 229 356 267 394 292 457 330 533 356 610
Hin 2.30 2.50 3.00 3.80 4.50 5.0 5.0 6.0 6.00 6.00 6.40 7.00 10.00 7.50 10.70 11.40 13.50 13.40 13.60 15.40 15.7
mm 59 63 75 97 115 127 127 152 152 152 162 178 252 191 272 290 342 340 345 390 400
Cin 5.10 5.10 6.30 9.10 9.10 9.10 9.10 15.70 15.70 15.70 15.70 25.60 41.34 18.10 41.34 43.30 55.5 - - - -
mm 130 130 160 230 230 230 230 400 400 400 400 650 1050 460 1050 1100 1410 - - - -
Din - - - - - - - - - - - - - - - - 15.75 15.75 24.75 24.75 31.5
mm - - - - - - - - - - - - - - - - 400 400 629 629 800
WG.
lb 5 7 10 15 21 21 33 33 42 42 73 73 126 128 165 205 253 352 506 550 616
kg 2.2 2.7 4.5 7.0 9.5 9.5 15 15 19 19 23 30 58 55 75 83 115 128 230 310 370
Class 300
NPS 1/2 3/4 1 11/2 2X11/2 2 21/2X2 21/2 3X21/2 3 4 X3 4 5 6 X4 6 8 X6 8 * 10X8* 10* 12X10* 12Bore in 1/2 3/4 1 11/2 11/2 2 2 2 1/2 2 1/2 3 3 4 5 4 6 6 8 8 10 10 12
Size mm 13 19 25 38 38 51 51 64 64 76 76 102 127 102 152 152 203 203 254 254 305
Lin 5.50 6.00 6.50 7.50 8.50 8.50 9.50 9.50 11.12 11.12 12.00 12.00 15.00 15.88 15.88 16.50 19.75 18.00 22.38 19.75 25.5
mm 140 152 165 190 216 216 241 241 283 283 305 305 381 403 403 419 502 457 568 502 648
Hin 2.3 2.5 3.0 3.8 4.50 5.0 5.0 6.0 6.0 6.0 6.40 7.0 10.0 7.50 10.7 11.40 13.5 13.40 13.6 15.40 15.7
mm 59 63 75 97 115 127 127 152 152 152 162 178 252 191 272 290 342 340 345 390 400
Cin 5.1 5.1 6.3 9.10 9.10 9.10 9.10 15.70 15.70 15.70 15.70 27.60 43.30 18.10 43.30 43.30 - - - - -
mm 130 130 160 230 230 230 230 400 400 400 400 700 1100 460 1100 1100 - - - - -
Din - - - - - - - - - - - - - - - - 24.78 21.88 31.50 31.50 31.5
mm - - - - - - - - - - - - - - - - 629 556 800 800 800
WG.
lb 5.5 7.7 12.1 23.1 32 32 52 52 66 66.0 88 143 178.2 178 209 260 330 440 550 691 836
kg 2.5 3.5 5.5 9 13 13 21 21 24 27 38 40 65 72.5 95.0 118.0 150.0 224 257.5 380 420
Class 600NPS 1/2 3/4 1 11/2 2x11/2 2 3x2 3 4x3 4
Bore in 1/2 3/4 1 11/2 11/2 2 2 3 3 4
Size mm 13 19 25 38 38 51 51 76 76 102
Lin 6.5 7.5 8.5 9.5 11.5 11.5 14 14 17 17
mm 165 190 216 241 292 292 356 356 432 432
Hin 2.9 3.1 4.0 4.4 4.4 5.5 5.5 12.2 12.2 13.8
mm 74.5 79.5 101 111 111 140 140 310 310 350
Cin 6.3 6.3 9.1 9.1 9.1 15.7 15.7 31.5 31.5 41.3
mm 160 160 230 230 230 400 400 800 800 1050
WG.
lb 7.7 13.2 17.6 28.6 50.7 55.1 88.1 99.1 143.2 154.2
kg 3.5 6 8 13 23 25 40 45 65 70
Class 900NPS 1/2 3/4 1
Bore in 1/2 3/4 1
Size mm 13 19 25
Lin 8.5 9.0 10.0
mm 216 229 254
Hin 5.4 5.6 5.6
mm 138 141 143
Cin 6.3 9.1 9.1
mm 160 230 230
WG.
lb 22.0 24.2 30.8
kg 10 11 14
Class 1500NPS 1/2 3/4 1
Bore in 1/2 3/4 1
Size mm 13 19 25
Lin 8.5 9.0 10.0
mm 216 229 254
Hin 5.4 5.6 5.6
mm 138 141 143
Cin 6.3 9.1 9.1
mm 160 230 230
WG.
lb 22.0 24.2 30.8
kg 10 11 14
-
7/27/2019 BallValveA2-05 (1)
8/44
DHV Industries, Inc.7
Small Size Ball Valves
Design Features
One-piece Body, Reduced Bore, Floating Ball
Blow-out Proof Stem, Low Emission
NPT Threaded Ends
Locking Device, on request
NACE MR0175
Material SpecificationNo. Parts Carbon Steel Stainless Steel
11 Body AISI 1045 316SS
10 Inscrewed Part AISI 1045 316SS
9 Ball 316SS
8 Stem Nut 304SS
7 Stem 316SS
6 Seat 15% R-PTFE5 Stem Packing Teflon
4 Packing Ring 304SS
3 Thrust Washer Teflon
2 Handle 304SS
1 Plastic Cover Plastic
Dimensions and weights
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2
D
in 0.20 0.28 0.35 0.49 0.63 0.79 0.96 1.26
mm 5 7 9 12.5 16 20 24.5 32
Lin 1.57 1.77 2.28 2.36 2.83 3.15 3.35 4.02
mm 40 45 58 60 72 80 85 102
Hin 1.30 1.42 1.65 1.77 2.05 2.24 2.36 2.60
mm 33 36 42 45 52 57 60 66
Cin 2.64 2.64 3.54 3.54 4.41 4.41 5.20 5.20
mm 67 67 90 90 112 112 132 132
Weightslb 0.15 0.24 0.37 0.55 0.88 1.47 1.80 2.86
kg 0.07 0.11 0.17 0.25 0.4 0.67 0.82 1.30
Specifications
End to End: DHV Standard
Thread End: ANSI B2.1 NPT
2000 WOG
-
7/27/2019 BallValveA2-05 (1)
9/44
DHV Industries, Inc. 8
Design Features
Two-piece Body, Reduced & Full Bore,
Floating Ball.
Blow-out Proof Stem, Low Emission
Locking Device, on request.
NACE MR0175
Dimensions and weights
Size DN 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
D in 0.46 0.5 0.59 0.79 0.98 1.26 1.54 2 2.56 3.15mm 11.6 12.7 15 20 25 32 39 50.8 65 80
Lin 2.42 2.42 2.49 3.02 3.58 3.94 4.65 5.41 6.54 7.6
mm 61.5 61.5 63.3 76.7 91 100 118 137.5 166 193
Hin 1.89 1.89 1.93 2.17 2.72 3.03 3.31 3.66 5.43 6.10
mm 48 48 49 55 69 77 84 93 138 155
Cin 4.72 4.72 4.72 5.12 6.10 6.10 7.28 7.28 9.84 11.02
mm 120 120 120 130 155 155 185 185 250 280
Weightslb 0.66 0.66 0.66 1.28 2.29 3.39 4.97 8.36 15 25.48
kg 0.3 0.3 0.3 0.58 1.04 1.54 2.26 3.8 6.8 11.58
Specifications
End to End: DHV Standard
Thread End: ANSI B2.1 NPT
Socket Weld End: ANSI B16.11
Material Specification
No. Description Carbon Steel Stainless Steel
1 Body A216 WCB A351 CF8 A351 CF8M
2 Body Cap A216 WCB A351 CF8 A351 CF8M
3 Ball A276-304 A276-304 A276-316
4 Seat PTFE reinforced
5 Stem A276-304 A276-316
6 Body Seal PTFE
7 Thrust Washer PTFE8 Packing PTFE
9 Gland Nut A276-304 A276-304
10/11 Nut & Washer Carbon Steel+Nickel Plated A276-304
12 Handle Carbon Steel+Nickel Plated A276-304
13 Plastic Cover Plastic
14 Locking Device Carbon Steel+Nickel Plated A276-304
Small Size Ball Valves1000 / 2000 WOG
-
7/27/2019 BallValveA2-05 (1)
10/44
DHV Industries, Inc.9
Design Features
Three-piece Body, Full Bore, Floating Ball.
Blow-out Proof Stem, Low Emission
Locking Device, on request. NACE MR0175
Small Size Ball Valves1000 / 2000 / 3000 WOG
Specifications
End to End: DHV Standard
Thread End: ANSI B2.1 NPT
Socket Weld End: ANSI B16.11
Dimensions and weights
Size WOG DN 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3 4
1000 / 2000in 0.46 0.5 0.59 0.79 1 1.26 1.5 2 2.56 3.15 3.94
Dmm 11.6 12.7 15 20 25.4 32 38 50.8 65 80 100
3000in - - 0.51 0.75 0.91 1.25 1.38 1.81 - - -
mm - - 13 19 23 32 35 46 - - -
1000 / 2000in 2.56 2.56 2.6 3.27 3.74 4.37 5.12 5.94 7.28 8.35 10.63
Lmm 65 65 66 83 95 111 130 151 185 212 270
3000 in - - 3.62 4.37 5 5.24 5.98 6.77 - - -mm - - 92 111 127 133 152 172 - - -
1000 / 2000in 1.65 1.65 1.93 2.05 2.44 2.6 3.03 3.35 5.47 5.90 6.81
Hmm 42 42 49 52 62 66 77 85 139 150 173
3000in - - 2.95 3.03 3.62 3.82 4.13 4.33 - - -
mm - - 75 77 92 97 105 110 - - -
1000 / 2000in 3.86 3.86 4.53 4.53 5.63 5.63 7.01 7.01 9.84 9.84 9.84
Cmm 98 98 115 115 143 143 178 178 250 250 250
3000in - - 4.84 6.3 6.3 7.68 7.68 9.84 - - -
mm - - 123 160 160 195 195 250 - - -
1000 / 2000lb 0.9 0.88 1.43 1.76 2.64 4.51 6.16 9.57 18.5 31.9 58.3
Weightskg 0.41 0.4 0.65 0.80 1.2 2.05 2.8 4.35 8.4 14.5 26.5
3000lb - - 3.89 5.8 10 16.52 20.02 24.23 - - -
kg - - 1.77 2.63 4.54 7.5 9.09 11.00 - - -
Material Specification
No. Part1000 / 2000 WOG 3000 WOG
Stainless Steel Carbon Steel Stainless Steel Carbon Steel
1 Body A351 CF8M A216 WCB A182 F316 A105
2 Cap A351 CF8M A216 WCB A182 F316 A1053 Ball 316 304 A182 F316
4 Seat 15% R-PTFE NYLON
5 Stem A276-316 A182 F316
6 Thrust Washer 15% R-PTFE 15% R-PTFE
7 Stem Packing 15% R-PTFE 15% R-PTFE
8 Bolt 304 SS A193 B8 / B8M A193 B7 / B7M
9 Hex Nut 304 SS A194 8 / 8M A194 2H / 2HM
10 Bolt Washer Stainless Steel Stainless Steel
11 Gland Nut A276-304 A182 F316
12 Stem Washer A276-304 Stainless Steel
13 Stem Nut A276-304 A194 8 / 8M A194 2H / 2HM
14 Handle Stainless Steel Stainless Steel
15 Plastic Cover Plastic Plastic
16 Lock Device Stainless Steel Stainless Steel
-
7/27/2019 BallValveA2-05 (1)
11/44
DHV Industries, Inc. 10
Class 150 / 300
Design Features
DHV Multi Port Three Way Ball Valves are designed for a large
array of services and suitable for either switching or mixing
application. Our design features allow quick and positive shutoff
with just a quarter turn. DHV Three Way Ball Valves provide many
features in standard L-Port or T-Port types. Each type offers many
variable positions and flow patterns to meet your particular service
needs.
Specifications
Basic Design: ANSI B16.34
Face to Face: DHV Standard
End Flange: ANSI B16.5
Test & Inspection: API - 598
Material for main parts1 Body WCB CF8 CF8M
2 Ball WCB / ENP F304 F316
3 Seat PTFE PTFE PTFE4 Stem 13Cr F304 F316
5 Packing PTFE PTFE PTFE
Dimensions
Size d d1 L2 L1 H W
in mm in mm in mm in mm in mm in mm in mm
1/2 15 1/2 15 1/2 15 5.51 140 2.76 70 2.52 64 5.12 130
3/4 20 3/4 20 3/4 20 6.50 165 3.25 83 3.31 84 6.30 160
1 25 1 25 1 25 6.50 165 3.25 83 3.31 84 6.30 160
11/2 40 11/2 40 11/2 40 9.84 250 4.92 125 5.98 152 19.68 500
2 50 2 50 2 50 10.24 260 5.12 130 6.18 157 19.68 500
21/2 65 21/2 65 21/2 65 12.60 320 6.30 160 7.20 183 31.50 800
3 80 3 80 3 80 12.60 320 6.30 160 7.20 183 31.50 800
4 100 4 100 4 100 14.57 370 7.28 185 7.68 195 31.50 800
5 125 5 125 5 125 20.08 510 10.04 255 13.98 355 33.46 850
6 150 6 150 5 125 20.08 510 10.04 255 13.98 355 33.46 850
8 200 8 200 6 150 22.84 580 11.42 290 16.93 430 59.06 1500
10 254 10 254 8 203 26.38 670 13.19 335 18.70 475 - -
12 300 12 300 10 254 28.35 720 14.17 360 21.65 550 - -
B. T-Type
A. L-Type
Three Way Ball Valves
-
7/27/2019 BallValveA2-05 (1)
12/44
DHV Industries, Inc.11
Trunnion Mounted Ball Valves
2-PC Side Entry Trunnion Ball Valve 3-PC Side Entry Trunnion Ball Valve 1-PC Top Entry Trunnion Ball Valve
Specifications
Basic Design: ANSI B16.34, API 6D
Face to Face: ANSI B16.10, API 6D End Flange: ANSI B16.5
BW End: ANSI B16.25
Test and Inspection: API 6D
Design Features
Full & reduced bore, cast or forged steel body.
Double Block and Bleed. Anti-static device, Low Emission
Fire-safe Design / Tested to API 6FA.
Operator Refer to MESC 77/ 130 & DHV Standard.
Manufacturing to NACE MR0175 on request.
Application
DHV Side EntryTrunnion Mounted Ball Valve are designed, engineered and manufactured especially for oil
and gas pipeline application. Manufactured at our API certified facility, all DHV Trunnion Ball Valves provide
excellent corrosion resistance and superior sealing performance at both high and low pressures. DHV offers
a wide variety of material options to meet your critical needs from Carbon Steel to Duplex Stainless Steel and
Inconel, available DHV sizes from 2 to 48 in ANSI class 150-2500. DHV Trunnion Ball Valves are equipped
with standard features of Double Block & Bleed, Fire Safe, Emergency Sealant Injections, NACE MR0175
compliance and ISO mounting pads to all bare stem valves for gear or actuator adaption. We are ready and
eager to meet your special feature requirement like extended Stem/Bonnet, Transition Pups, Metal Seated,
Fully Welded Body and Actuation.
DHV Top EntryTrunnion Mounted Ball Valve is specially designed and developed for lower operating torque
and easy maintenance to meet the demands of our oil and gas pipeline customers. DHV one piece heavy
duty quality body offers convenient access to the stem and ball for on-site maintenance. DHV Top Entry Ball
Valve is available in various combinations of flanged or weld end connections from sizes 2 to 30, ANSI 150-
1500LB. Standard Features for DHV Top Entry Ball Valve include Double Block & Bleed, Fire Safe Design,
Emergency Sealant Injection, NACE MR0175 compliance and ISO Mounting pad. Extended stem/bonnet for
underground service is a typical option feature DHV Top Entry Ball Valve offers.
-
7/27/2019 BallValveA2-05 (1)
13/44
DHV Industries, Inc. 12
Trunnion Mounted Ball ValvesTwo-Piece, Cast Steel Body, Trunnion Ball Valve
Component Parts Lists
No. Parts
1 Body
2 Body Cap
3 Lower Cover
4 Ball
5 Seat Insert
6 Stem
7 Trunnion
8 Seat Retainer
9 Thrust Bearing
10 Gasket
11 Stem Bushing
12 Trunnion Bushing
13 Stem O-Ring
14 Thrust Washer
15 Gland O-Ring
17 Gland
18 Gland Bolt
19 Plate / Coil Spring
20 O-Ring
21 Stud
22 Nut
23 Drain Fitting
24 Key
-
7/27/2019 BallValveA2-05 (1)
14/44
DHV Industries, Inc.13
Trunnion Mounted Ball ValvesTwo-Piece, Cast Steel Body, Trunnion Ball Valv
Carbon St. Body
CS NACE TRIM S.S. TRIM
Duplex S.S. / SUPER
No. PartsSOUR SERVICE SOUR SERVICE
Duplex S.S. TRIMSOUR SERVICE
1 Body
2 Body Cap A216 WCB / A216 WCB+ENP
3 Lower Cover
4 Ball A105+ENP A182 F6 / 316SS / 304SS A182 F51 / F53 / A890 4A / 5A / 6A
5 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK
6 StemA105 + ENP / 4140+ENP A182 F51 / F53
7 TrunnionA182 F6 / F316 / F304
8 Seat Retainer A105 + ENP17-4PH
A182 F51 / F53
9 Thrust Bearing Metal Backed PTFE / Graphite
10 Gasket Metal & Flexible Graphite
11 SealantInjection Fitting, Seat 4140 / 316SS (with an Internal Check Valve)
12 Trunnion Bushing Metal Backed PTFE
13 Stem Packing Graphite
14 SealantInjection Fitting, Stem 4140 / 316SS (with an Internal Check Valve)
15 Anti-StaticDevice Stainless Steel
16 GlandRing A105+ENP 410SS / 316SS / 304SS F51 / F53
17 Gland A216 WCB
18 Gland Bolt A193 B7M
19 Spring INCONEL X750
20 O-Ring VITON / NBR
21 Stud A193 B7M
22 Nut A194 2HM
23 Drain Fitting 316SS
24 Key AISI 1045 / 4140
Material Specification
Note: Other Material Standard can be Supplied Upon Request.
Stainless St. Body Duplex S.S. / SUPER Duplex S.S. Body Low Temp. St. Body
No. Parts S.S. TRIM Duplex S.S. / SUPER CS NACE TRIM S.S. TRIMSOUR SERVICE
Duplex S.S. TRIMSOUR SERVICE SOUR SERVICE
SOUR SERVICE
1 Body
2 Body Cap A351 CF8 / CF8M A890 4A / 5A / 6A A352 LCB / LCC / +ENP
3 Lower Cover
4 Ball 304SS / 316SS A182 F51 / F53 / A890 4A / 5A / 6A A350 LF2+ENP A182 F316 / A351 CF8M
5 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK
6 Stem
7 Trunnion F304 / F316 A182 F51 / F53 A350 LF2 + ENP A182 F316
8 Seat Retainer
9 Thrust Bearing Metal Backed PTFE / Graphite
10 Gasket Metal & Flexible Graphite
11 SealantInjection Fitting, seat 316SS (with an Internal Check Valve)
12 Trunnion BushingMetal Backed PTFE / Graphite
13 Stem Packing14 SealantInjection Fitting, Stem 316SS (with an Internal Check Valve)
15 Anti-StaticDevice Stainless Steel
16 GlandRing 304SS / 316SS 316SS / F51 / F53A350 LF2 / A352 LCB / A352 LCC+ENP
17 Gland CF8 / CF8M A890 4A / 5A / 6A
18 Gland Bolt A193 B8 / B8M A320 L7 / L7M
19 Spring INCONEL X750
20 O-Ring VITON / NBR / HNBR
21 Stud A193 B8 / B8M A320 L7M
22 Nut A194 8 / 8M A194 7M
23 Drain Fitting 316SS
24 Key AISI 1045 / 4140
-
7/27/2019 BallValveA2-05 (1)
15/44
DHV Industries, Inc. 14
Trunnion Mounted Ball ValvesTwo-Piece, Cast Steel Body, Metal-to-Metal Seat, Trunnion Ball Valve
Material Specification
Carbon St. Body Stainless St. Body
No. Parts CS NACE TRIM SOUR S.S TRIM SOUR S.S TRIM SOUR Duples S.S TRIM SOURSERVICE SERVICE SERVICE SERVICE
-5~300C Max450C Max450C
1 BodyA216 WCB
A217 WC9 /A351 CF8 / CF8M
A351 CF8 / CF8M
2 Body Cap A217 WC9+Inconel A890 4A / 5A / 6A
3 Ball A105+HCr / SFNi / T.CA351 CF8 / A182 F304+HCr / SFNi / T.C A890 4A / 5A / 6A /A182 F51
A351 CF8M / A182 F316+HCr / SFNi / T.C F53+HCr / SFNi / T.C
4 Stem A105+HCr / A182 F6a 17-4PH +HCrA182 F51 / F53+HCr
5 Trunnion +HCr A182 F51 / F53+HCr
6 Seat A105+STL / T.CA182 F304 / A182 F316+STL / T.C
A182 F51 / F53+STL / T.CA182 F51 / F53+STL / T.C
7 Spring Holder A105+ENP A182 F316 / F304 / F6a A182 F316 / F51
8 Spring INCONEL X-750
9 Gland
10 Gland Ring
A105+ENP A182 F316 / F304 / F6a
A182 F316 / F304
11 Packing Ring A182 F51 / F53
12 Lower Cover
13 Drain Fitting 316SS
14 Seal Ring R-PTFE Metal Metal
15 Packing Fexible Graphite
16 Gasket Metal & Flexible Graphite
17 Stud A193 B7M A193 B8 / B8M
18 Nut A194 2HM A194 8 / 8M
19 Thrust Washer A182 F304 / F316 / F51
20 Thrust Bearing
21 Stem Bearing Metal Backed PTFE A182 316 (QPQ)
22 Trunnion Bearing
-5~300C
MAX 450C
Note: Other Material Standard can be Supp lied Upon Request.
T.C: TUNGSTEN-CARBIDE QPQ: QUENCH-POLISH-QUENCH HCr: HARD CHROMIUM PLATING SFNi: Ni ALLOY OVERLAY
-
7/27/2019 BallValveA2-05 (1)
16/44
DHV Industries, Inc.15
Two-Piece Cast Steel Body Class 150-300 Full Bor
Trunnion Mounted Ball Valves
Class 150 Size 2 3 4 6 8 10 12 14 16 18 20 24
Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25
mm 51 76 102 152 203 254 305 337 387 438 489 591
Lin 7.0 8.0 9.0 15.5 18.0 21.0 24.0 27.0 30.0 34.0 36.0 42.0
mm 178 203 229 394 457 533 610 686 762 864 914 1067H1 in 4.8 6.8 7.8 11.7 11.8 12.8 14.4 15.7 17.3 19.7 21.8 21.8H2 in 3.2 4.1 5.1 8.4 15.3 15.9 17.9 19.3 21.6 24.4 26.8 26.8C in 11 15.75 25.6 41.3 - - - - - - - -
D in - - - - 23.6 23.6 31.5 32.5 33.5 34.5 35.5 35.5
Weightlb 24.2 50.6 95 242 496 727 1079 1333 1963 2471 3260 5330kg 11 23 43 110 225 330 490 605 891 1122 1480 2420
Class 150
Size 26 28 30 32 34 36 40 42 48
Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25 46
mm 635 686 737 781 832 927 978 1022 1168
Lin 45 49 51 54 58 60 69 73 84
mm 1143 1245 1295 1372 1473 1524 1753 1855 2134H1 in 24.9 26.4 27.8 29.6 31.0 32.2 35.7 37.0 41.9H2 in 27.0 28.5 30.6 36.3 37.6 38.8 41.8 43.0 47.9C in - - - - - - - - -D in 35.5 35.5 35.5 35.5 31.5 31.5 55.1 55.1 55.1
Weight lb 5727 7511 12500 14210 17390 20260 25850 30460 42320kg 2600 3410 5670 6450 7890 9190 11730 13820 19200
Class 300
Size 2 3 4 6 8 10 12 14 16 18 20 24
Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25
mm 51 76 102 152 203 254 305 337 387 438 489 591
Lin 8.5 11.0 12.0 16.0 20.0 22.5 25.5 30.0 33.0 36.0 39.0 45.0
mm 216 283 305 403 502 568 648 762 838 914 991 1143H1 in 4.8 6.8 7.8 10.2 11.8 12.8 14.4 15.75 17.3 19.7 21.8 21.8H2 in 3.2 4.1 5.1 13.4 15.3 15.9 17.9 19.3 21.6 24.4 26.8 26.8C in 11.0 15.7 25.6 - - - - - - - - -D in - - - 17.7 23.6 23.6 31.5 32.5 33.5 34.5 35.5 35.5
Weight
lb 37.4 77 134 300 577 886 1284 1793 2489 3278 3731 6300
kg 17 35 61 136 262 402 583 814 1130 1488 1694 2860
Class 300
Size 26 28 30 32 34 36 40 42 48
Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25 46
mm 635 686 737 781 832 927 978 1022 1168
Lin 49 53 55 60 64 68 77 82 85
mm 1245 1346 1379 1524 1626 1727 1956 2083 2170H1 in 25.7 26.9 28.3 29.7 31.1 32.2 35.8 37.4 42.6H2 in 31.7 32.6 34.1 35.7 36.2 37.6 41.9 43.3 53.3C in - - - - - - - - -D in 31.5 31.5 55.1 55.1 55.1 55.1 55.1 55.1 55.1
Weightlb 7269 9449 11630 14900 18250 21250 27130 31960 44430kg 3300 4290 5280 6760 8280 9640 12310 14500 20160
Dimensions and weights
-
7/27/2019 BallValveA2-05 (1)
17/44
DHV Industries, Inc. 16
Two-Piece Cast Steel Body Class 600-1500 Full Bore
Trunnion Mounted Ball Valves
Class 600 Size 2 3 4 6 8 10 12 14 16 18 20 24
Bore Sizein 2.0 3.0 4.0 6.0 8.0 10.0 12.0 13.25 15.25 17.25 19.25 23.25
mm 51 76 102 152 203 254 305 337 387 438 489 591
Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0
mm 292 356 432 559 660 787 838 889 991 1092 1194 1397H1 in 4.5 5.2 6.0 8.5 11.6 14.6 16.5 18.1 19.9 22.1 24.8 24.8H2 in 6.6 7.8 11.0 12.9 14.7 17.5 20.3 21.6 24.2 27.6 31.9 31.9C in 15.7 25.6 - - - - - - - - - -
D in - - 17.7 23.6 31.5 32.5 33.5 34.5 35.5 36.5 37.5 37.5
Weightlb 73 130 223 533 848 1454 1987 2730 3756 5088 6784 12841kg 33 59 101 242 385 660 902 1243 1705 2310 3080 5830
Class 600
Size 26 28 30 32 34 36 40 42
Bore Sizein 25 27 29 30.75 32.75 36.5 38.5 40.25
mm 635 686 737 781 832 927 978 1022
Lin 57 61 65 70 76 82 92 96
mm 1448 1549 1651 1778 1930 2083 2337 2437H1 in 25.6 27.0 28.6 30.2 31.7 33.0 36.9 38.5H2 in 31.2 32.9 34.9 36.0 37.4 38.9 47.7 53.3C in - - - - - - - -D in 31.5 31.5 31.5 55.1 55.1 55.1 55.1 55.1
Weight lb 13436 15749 17930 18670 22830 28634 33990 40070kg 6100 7150 8140 8470 10360 13000 15420 18180
Dimensions and weights
Class 900 Size 2 3 4 6 8 10 12 14 16 18 20 24 26 28 30
Bore Sizein 2.0 3.0 4.0 6.0 8.0 10 12 12.75 14.75 16.75 18.625 22.5 24.375 26.25 28.125
mm 51 76 102 152 203 254 305 324 375 425 473 572 619 667 714
Lin 14.5 15.0 18.0 24.0 29.0 33 38 40.5 44.5 48 52 61 65 69 74
mm 368 381 457 610 737 838 965 1029 1130 1219 1321 1549 1651 1753 1880H1 in 5.0 7.5 8.5 10.6 10.6 16.5 18.5 20.1 23.6 27.6 28.3 31.9 27.1 28.9 31.1H2 in 8.5 10.2 11.7 14.2 14.2 19.8 22.5 26.6 30.0 34.1 35.2 37.6 32.9 34.6 41.2C in 25.6 25.6 - - - - - - - - - - - - -D in - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 37.4 37.4 37.4
Weightlb 139 176 275 749 1100 2357 3546 3436 4934 6608 9604 15485 18216 22467 27401
kg 63 80 125 340 500 1070 1610 1560 2240 3000 4360 7030 8270 10200 12440
Class 1500 Size 2 3 4 6 8 10 12 14 16 18 20 24
Bore Sizein 2.0 3.0 4.0 5.75 7.62 9.5 11.375 12.5 14.25 16 18 21
mm 51 76 102 146 194 241 289 318 362 407 457 534
Lin 14.5 18.5 21.5 27.8 32.75 39 44.5 49.5 54.5 60.5 65.5 80.4
mm 368 470 546 705 832 991 1130 1257 1384 1537 1664 2043H1 in 5.0 7.5 8.5 11.7 11.7 19.5 21.3 23.2 26.4 28.0 29.5 33.5H2 in 8.5 10.2 11.7 14.4 14.4 22.8 27.4 30.0 32.7 35.4 37.4 42.5C in 25.6 - - - - - - - - - - -D in - 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5
Weightlb 148 330 540 863 1420 2114 3304 4009 5066 6409 10771 16850kg 67 150 245 392 645 960 1500 1820 2300 2910 4890 7650
-
7/27/2019 BallValveA2-05 (1)
18/44
DHV Industries, Inc.17
Trunnion Mounted Ball ValvesTwo-Piece Cast Steel Body Class 150-300 Reduced Bor
Class 150 NPS 2x11/2 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 16x14 18x16 20x16 2
Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 1
mm 38 51 76 102 152 203 254 305 305 337 387 387
Lin 7.0 8.0 9.0 15.5 18.0 21.0 24.0 27.0 39.5 30.0 34.0 36.0 3
mm 178 203 229 394 457 533 610 686 762 762 864 914H1 in 4.8 4.8 6.8 7.8 11.7 15.1 12.8 14.4 14.4 15.7 17.3 17.3H2 in 3.2 3.2 4.1 5.1 8.4 10.1 15.9 17.9 17.9 19.3 21.6 21.6 2C in 11.0 11.0 15.75 25.6 41.3 55.5 - - - - - -
D in - - - - - - 23.6 31.5 31.5 32.5 33.5 33.5 3
Weightlb 24 37.4 73 145 286 524 751 1139 1234 1430 2011 2225 2kg 11 17 33 66 130 238 341 517 560 649 913 1010 1
Class 150
NPS 24x20 26x24 30x24 28x26 30x28 32x30 36x30 34x32 36x34 40x36 42x40 48x42
Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5 40.25
mm 489 591 591 635 686 737 737 781 832 927 978 1022
Lin 42.0 45 51 49 51 54 60 58 60 69 73 84
mm 1067 1143 1295 1245 1295 1372 1524 1473 1524 1753 1855 2134H1 in 21.8 21.8 218 24.9 26.4 27.8 27.8 29.6 31.0 32.2 35.7 37.0H2 in 26.8 26.8 26.8 27.0 28.5 30.6 30.6 36.3 37.6 38.8 41.8 43.0C in - - - - - - - - - - - -D in 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 35.5 55.1 55.1
Weight lb 3998 5617 6784 9030.8 11167 13150 9934 15793 18811 23039.6 28139 36366kg 1815 2550 3080 4100 5070 5970 4510 7170 8540 10460 12775 16510
Class 300
NPS 2x11/2 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 16x14 18x16 20x16 2
Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 1
mm 38 51 76 102 152 203 254 305 305 337 387 387
Lin 8.5 11.1 12.0 16.0 20.0 22.5 25.5 30.0 33.0 33.0 36.0 39.0 3
mm 216 283 305 403 502 568 648 762 838 838 914 991H1 in 4.5 4.8 6.8 7.8 11.7 11.8 12.8 14.4 14.4 15.75 17.3 17.3H2 in 2.9 3.2 4.1 5.1 8.4 15.3 15.9 17.9 17.9 19.3 21.6 21.6 2C in 11.0 11.0 15.7 25.6 41.3 55.5 - - - - - -D in - - - - - - 23.6 31.5 31.5 32.5 33.5 33.5 3
Weight
lb 26.4 57.2 105.6 198 408 627 921 1405 1564 1890 2665 2906 3
kg 12 26 48 90 185 285 418 638 710 858 1210 1320 1
Class 300NPS 24x20 26x24 30x24 28x26 30x28 32x30 36x30 34x32 36x34 40x36 42x40 48x42
Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5 40.25
mm 489 591 591 635 686 737 737 781 832 927 978 1022
Lin 45.0 49 55 53 55 60 68 64 68 77 82 85
mm 1143 1245 1379 1346 1379 1524 1727 1626 1727 1956 2083 2170H1 in 21.8 21.8 21.8 25.7 26.9 28.3 28.3 29.7 31.1 32.2 35.8 37.4H2 in 26.8 26.5 26.5 31.7 32.6 34.1 34.1 35.7 36.2 37.6 41.9 43.3C in - - - - - - - - - - - -D in 35.5 35.5 35.5 35.5 35.5 55.1 55.1 55.1 55.1 55.1 55.1 55.1
Weightlb 4725 7610.1 8480 10441 12247 13998 13084 16564 19736 24174 29526 38172kg 2145 3455 3850 4740 5560 6355 5940 7520 8960 10975 13405 17330
Dimensions and weights
-
7/27/2019 BallValveA2-05 (1)
19/44
DHV Industries, Inc. 18
Trunnion Mounted Ball ValvesTwo-Piece Cast Steel Body Class 600-1500 Reduced Bore
Dimensions and weights
Class 900NPS 2x11/2 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 16x14 18x16 20x16 20x18 24x20 26x24 30x24 28x26
Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10 12 12 12.75 14.75 14.75 16.75 18.625 22.5 22.5 24.375
mm 38 51 76 102 152 203 254 305 305 324 375 375 425 473 572 572 619
Lin 14.5 15.0 18.0 24.0 29.0 33 38 40.5 44.5 44.5 48 52 52 61 65 74 69
mm 368 381 457 610 7 37 838 965 1029 1130 1130 1219 1321 1321 1549 1651 1880 1753H1 in 5.0 5.0 7.5 8.5 8.5 10.6 16.5 18.5 18.5 20.1 23.6 23.6 27.6 28.3 31.9 36.9 27.1H2 in 8.5 8.5 10.2 11.7 11.7 14.2 19.8 22.5 22.5 26.6 30.0 30.0 34.1 35.2 37.6 37.6 32.9C in 25.6 25.6 25.6 - - - - - - - - - - - - - - D in - - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 37.4 37.4 37.4
Weightlb 83.6 159 258 639 958 1289 2015 2632 2907 3965 5551 6278 7489 12291 16850 17863 20341
kg38 72 117 290 435 585 915 1195 1320 1800 2520 2850 3400 5580 7650 8110 9235
Class 1500NPS 2x11/2 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 16x14 18x16 20x18 24x20
Bore Sizein 1.5 2.0 3.0 4.0 5.75 7.62 9.5 11.375 11.2 12.5 14.25 16 18
mm 38 51 76 102 146 194 241 289 289 318 362 407 457
Lin 14.5 18.5 21.5 27.75 32.75 39 44.5 49.5 54.5 54.5 60.5 65.5 80.4
mm 368 470 546 705 832 991 1130 1257 1384 1384 1537 1664 2043H1 in 5.0 5.0 7.5 8.5 8.5 11.7 19.5 21.3 21.3 23.2 26.4 28.0 29.5H2 in 8.5 8.5 10.2 11.7 11.7 14.4 22.8 27.4 27.4 30.0 32.7 35.4 37.4C in 25.6 25.6 - - - - - - - - - - -D in - - 23.6 23.6 23.6 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5
Weightlb 112 225 396 748 1254 2390 4075 5771 6564 8018 11740 17291 26267kg 51 102 180 340 570 1085 1850 2620 2980 3640 5330 7850 11925
Class 600NPS 2x11/2 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 16x14 18x16 20x16 2
Bore Sizein 1.5 2.0 3.0 4.0 6.0 8.0 10.0 12.0 12.0 13.25 15.25 15.25 1
mm 38 51 76 102 152 203 254 305 305 337 387 387
Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 39.0 43.0 47.0 4
mm 292 356 432 559 660 787 838 889 991 991 1092 1194 1H1 in 4.5 4.5 5.2 6.3 8.5 11.6 14.6 16.5 16.5 18.1 19.9 19.9 H2 in 6.6 6.6 7.8 9.2 12.9 14.7 17.5 20.3 20.3 21.6 24.2 24.2 C in 15.7 15.7 25.6 41.4 - - - - - - - -
D in - - - - 23.6 31.5 32.5 33.5 33.5 34.5 35.5 35.5 3
Weightlb 46.2 106 178 335 619 1066 1599 2555 2621 3489 4507 4736 5kg 21 48 81 152 281 484 726 1160 1190 1584 2046 2150 2
Class 600NPS 24x20 26x24 30x24 28x26 30x28 32x30 36x30 34x32 36x34 40x36 42x40
Bore Sizein 19.25 23.25 23.25 25 27 29 29 30.75 32.75 36.5 38.5
mm 489 591 591 635 686 737 737 781 832 927 978
Lin 55.0 57 65 61 65 70 82 76 82 92 96
mm 1397 1448 1651 1549 1651 1778 2083 1930 2083 2337 2437H1 in 24.8 24.8 24.8 25.6 27.0 28.6 28.6 30.2 31.7 33.0 36.9H2 in 31.9 31.9 31.9 31.2 32.9 34.9 34.9 36.0 37.4 38.9 47.7C in - - - - - - - - - - -D in 37.5 37.5 37.5 37.5 37.5 37.5 37.5 55.1 55.1 55.1 55.1
Weight lb 9449 13855 15396 17137 17324 17533 18722 20738 24714 30286.3 37004kg 4290 6290 6990 7780 7865 7960 8500 9415 11220 13750 16800
-
7/27/2019 BallValveA2-05 (1)
20/44
DHV Industries, Inc.19
Component Parts List
1 BODY2 ADAPTER
3 BALL
4 SEAT RING
5 SEAT O-RING
7 GLAND
8 GLAND CAP SCREW
9 STOP PLATE
10 STEM
11 STEM O-RING
12 PLATE CAP SCREW
13 SEALANT INJECTION FITTING,STEM14 GLAND O-RING
15 BODY STUD
16 BODY NUT
17 BODY O-RING
18 TRUNNION O-RING
19 DRAIN FITTING
20 TRUNNION
30 SEAT INSERT
31 SPRING
32 GLAND BUSHING
33 THRUST WASHER
35 STEM KEY
36 STEM GRAPHITE PACKING
37 GLAND GRAPHITE GASKET
38 BODY GRAPHITE GASKET
39 TRUNNION GRAPHITE GASKET
40 TRUNNION BUSHING
41 TRUNNION CAP SCREW
43 HANDLE ADAPTER
44 HANDLE
45 LOCK SCREW
46 NAME PLATE
47 RIVET
Trunnion Mounted Ball Valves
For Size4
Class 150-2500 LB
Three-Piece Forged Steel Body Side Entry Type SE-
-
7/27/2019 BallValveA2-05 (1)
21/44
DHV Industries, Inc. 20
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1
For Size4
Class 150-2500 LB
-
7/27/2019 BallValveA2-05 (1)
22/44
DHV Industries, Inc.21
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-
Component Parts Lists
1 BODY2 ADAPTER
3 BALL
4 SEAT RING
5 SEAT O-RING
6 SEALANT INJECTION FITTING,SEAT
7 GLAND
8 GLAND CAP SCREW
10 STEM
11 STEM O-RING
12 PLATE CAP SCREW
13 SEALANT INJECTION FITTING,STEM
14 GLAND O-RING
15 BODY STUD
16 BODY NUT
17 BODY O-RING
19 DRAIN FITTING
21 SPRING
22 GEAR STUD
23 GEAR ADAPTER PLATE NUT
24 INTERNAL CHECK VALVE
25 VENT FITTING
26 LIFTING LUG STUD
27 BEARING RETAINER
28 LOCATION STUD
*29 SPACER
30 SEAT INSERT
31 SPRING
33 THRUST WASHER
34 STEM BEARING
For Size6
Class 150-2500 LB
35 STEM KEY
36 STEM GRAPHITE PACKING
37 GLAND GRAPHITE GASKET
38 BODY GRAPHITE GASKET
46 NAME PLATE
47 DRIVE SCREW
48 GLAND PIN
49 LOCK WASHER
50 GREASE FITTING O-RING
51 STEM KEY CAP SCREW
52 LIFTING LUG
53 WORM GEAR OPERATOR
54 WORM GEAR ADAPTER PLATE
55 HANDWHEEL
56 CLOSURE PIN
57 BALL BEARING58 SUPPORT LEG
59 BALL THRUST WASHER
*Optional
-
7/27/2019 BallValveA2-05 (1)
23/44
DHV Industries, Inc. 22
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-3
For Size6
Class 150-2500 LB
-
7/27/2019 BallValveA2-05 (1)
24/44
DHV Industries, Inc.23
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1 SE-
Material Specification
Part Carbon St. Body Stainless St. Body Low Temp. St. Body
No.Description CS NACE TRIM S.S TRIM S.S TRIM CS NACE TRIM S.S TRIM
SOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE
1 Body A105 / +ENP A182-F316 A350 LF2 / +ENP
2 Adapter A105 / +ENP A182-F316 A350 LF2 / +ENP
3 Ball A105+ENP A182 F6 / F316 A182-F316 A350-LF2+ENP A182-F316
4 Seat Ring A105+ENP A182F6 / F316 A182-F316 A350-LF2+ENP A182-F316
5 Seat O-Ring VITON-B VITON-GLT / HNBR
6 Sealant Injection Fitting, Seat 4140 / 316 SS 316 SS 316 SS
7 Gland A105 + ENP A182-F316 A350-LF2+ENP8 Gland Cap Screw A193-B7M A193-B8 / B8M A320 L7M
9 Stop Plate Carbon Steel Carbon Steel+ENP Low Temp Carbon Steel
10 Stem 4140+ENP /A105 + ENP 17-4PH / F316 4140+ENP / LF2+ENP A182-F316
11 Stem O-Ring VITON-B VITON-GLT / HNBR
12 Plate Cap Screw A193 B7M A193-B8 / B8M A320-L7M
13 Sealant Injection Fitting, Stem 4140 / 316 SS 316 SS 4140 / 316 SS
14 Gland O-Ring VITON-B VITON-GLT / HNBR
15 Body Stud A193 B7M A193-B8 / B8M A320-L7M
16 Body Nut A194 2HM A194-8 / 8M A194-7M17 Body O-Ring VITON-B VITON-GLT / HNBR
18 Trunnion O-Ring VITON-B VITON-GLT / HNBR
19 Drain Fitting 4140 / 316 SS 316 SS 4140 / 316 SS
20 Trunnion 4140+ENP / A105 + ENP A182-F316 A350 LF2+ENP
21 Gear Adapter Cap Screw A193-B7M A193-B8 / B8M A320-L7M
22 Gear Stud A193-B7M A193-B8 / B8M A320-L7M
23 Gear Adapter Plate Nut A194-2HM A194 Gr8 / 8M A194 7M
24 Internal Check Valve 4140 / 316 SS 316 SS 316 SS
25 Vent Fitting 4140 / 316 SS 316 SS 316 SS26 Lifting Lug Stud A193-B7M A193-B8 / B8M A320-L7M
27 Bearing Retainer A105+ENP A182-F316 A350-LF2+ENP
28 Location Stud A193-B7M A193-B8 A320 L7M
* 29 Spacer A105+ENP A182-F316 A350 LF2+ENP A182-F316
30 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK
-
7/27/2019 BallValveA2-05 (1)
25/44
DHV Industries, Inc. 24
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1 SE-3
Material Specification
Part
Carbon St. Body Stainless St. Body Low Temp. St. Body
No.Description CS NACE TRIM S.S TRIM S.S TRIM CS NACE TRIM S.S TRIM
SOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE
31 Spring INCONEL X750
32 Gland Bushing Metal Backed + PTFE
33 Thrust Washer Metal & Flexible Graphite
34 Stem Bearing Metal Backed + PTFE
35 Stem Key AISI 1045
36 Stem Graphite Packing Flexible Graphite
37 Gland Graphite Gasket Metal & Flexible Graphite
38 Body Graphite Gasket Metal & Flexible Graphite
39 Trunnion Graphite Gasket Metal & Flexible Graphite
40 Trunnion Bushing Metal Backed + PTFE
41 Trunnion Cap Screw Carbon Steel
42 Spring Pin Carbon Steel
43 Handle Adapter Carbon Steel
44 Handle Carbon Steel Pipe
45 Lock Screw Carbon Steel
46 Name Plate Stainless Steel47 Drive Screw Carbon Steel
48 Gland Pin Carbon Steel
49 Lock Washer Graphite
50 Grease Fitting O-Ring VITON
51 Stem Key Cap Screw Carbon Steel
52 Lifting Lug Carbon Steel
53 Worm Gear Operator Commerical
54 Worm Gear Adapter Plate Carbon Steel
55 Handwheel Malleable Iron56 Closure Pin Carbon Steel
57 Ball Bearing Metal Backed + PTFE
58 Support Leg Carbon Steel
59 Ball Thrust Washer Metal & Flexible Graphite
Note: Other Material Standard Can be Supplied Upon Request.
* Part No 29 Spacer is Optional.
-
7/27/2019 BallValveA2-05 (1)
26/44
DHV Industries, Inc.25
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1 SE-3
Dimensions and weights Class 150
SizeL
B B1 F E G H D WGT LbRF RTJ WE
2x 11/2 7.0 7.5 8.5 1.5 2.0 5.5 3.7 17.7 9.3 - 26
2 7.0 7.5 8.5 2.0 2.0 6.1 4.1 17.7 9.3 - 40
3x 2 8.0 8.5 11.1 2.0 3.0 6.1 4.1 17.7 9.3 - 55
3 8.0 8.5 11.1 3.0 3.0 7.7 5.1 23.6 11.0 - 71
4x 3 9.0 9.5 12.0 3.0 4.0 7.7 5.1 23.6 11.0 - 86
4 9.0 9.5 12.0 4.0 4.0 9.1 6.5 23.6 12.0 - 104
6x 4 15.5 16.0 18.0 4.0 6.0 9.1 6.5 23.6 12.0 - 143
6 15.5 16.0 18.0 6.0 6.0 9.9 7.4 - 12.4 19.7 282
8x 6 18.0 18.5 20.5 6.0 8.0 9.9 7.4 - 12.4 19.7 440
8 18.0 18.5 20.5 8.0 8.0 10.8 8.7 - 13.3 19.7 588
10x 8 21.0 21.5 22.0 8.0 10.0 10.8 8.7 - 13.3 19.7 682
10 21.0 21.5 22.0 10.0 10.0 12.6 10.2 - 15.2 19.7 1051
12x 10 24.0 24.5 25.0 10.0 12.0 12.6 10.2 - 15.2 19.7 116112 24.0 24.5 25.0 12.0 12.0 14.1 11.7 - 16.3 27.6 1632
14x 12 27.0 27.5 30.0 12.0 13.25 14.1 11.7 - 16.3 27.6 1680
16x 12 30.0 30.5 33.0 12.0 15.25 14.1 11.7 - 16.3 27.6 1780
14 27.0 27.5 30.0 13.25 13.25 15.4 12.8 - 17.6 27.6 1820
16x 14 30.0 30.5 33.0 13.25 15.25 15.4 12.8 - 17.6 27.6 1914
16 30.0 30.5 33.0 15.25 15.25 15.7 14.3 - 21.5 27.6 2354
18x 16 34.0 34.5 36.0 15.25 17.25 15.7 14.3 - 21.5 27.6 2464
20x 16 36.0 36.5 39.0 15.25 19.25 15.7 14.3 - 21.5 27.6 2662
18 34.0 34.5 36.0 17.25 17.25 17.2 15.9 - 20.2 27.6 3696
20x 18 36.0 36.5 39.0 17.25 19.25 17.2 15.9 - 20.2 27.6 3800
20 36.0 36.5 39.0 19.25 19.25 18.8 17.5 - 21.8 27.6 4070
24x 20 42.0 42.5 45.0 19.25 23.25 18.8 17.5 - 21.8 27.6 4620
22 39.0 - 43.0 21.25 21.25 20.5 19.2 - 23.0 27.6 539024 42.0 42.5 45.0 23.25 23.25 22.6 21.1 - 26.1 27.6 6996
30x 24 51.0 - 55.0 23.25 29.0 22.6 21.1 - 26.1 27.6 7546
26 45.0 - 49.0 25.0 25.0 23.4 24.9 - 27.0 27.6 8294
28 49.0 - 53.0 27.0 27.0 24.9 26.4 - 28.5 27.6 10197
30 51.0 - 55.0 29.0 29.0 27.0 27.8 - 30.6 27.6 1181436x 30 60.0 - 68.0 29.0 34.5 27.0 27.8 - 30.6 27.6 14190
32 54.0 - 60.0 30.75 30.75 29.6 29.6 - 36.3 24.4 15310
34 58.0 - 64.0 32.75 32.75 30.7 30.7 - 37.6 24.4 17500
36 60.0 - 68.0 34.5 34.5 32.1 32.2 - 38.8 24.4 19700
40 69 - 69 38.43 38.43 35.43 35.35 - 41.8 55.1 27632
42 72 - 72 40.16 40.16 37.13 36.89 - 43.0 55.1 31416
Note: Dimensions in inch. Weights in pound
SE-3SE-1
-
7/27/2019 BallValveA2-05 (1)
27/44
DHV Industries, Inc. 26
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1 SE-3
Dimensions and weights Class 300
SizeL
B B1 F E G H D WGT LbRF RTJ WE
2x 11/2 8.5 9.1 8.5 1.5 2.0 5.5 3.7 17.7 9.3 - 46
2 8.5 9.1 8.5 2.0 2.0 6.1 4.1 17.7 9.3 - 61.6
3x 2 11.1 11.7 11.1 2.0 3.0 6.1 4.1 17.7 9.3 - 79
3 11.1 11.7 11.1 3.0 3.0 7.7 5.1 23.6 10.6 - 102
4x 3 12.0 12.6 12.0 3.0 4.0 7.7 5.1 23.6 10.6 - 121
4 12.0 12.6 12.0 4.0 4.0 9.1 6.5 39.4 12.0 - 160
6x 4 15.9 16.5 18.0 4.0 6.0 9.1 6.5 39.4 12.0 212
6 15.9 16.5 18.0 6.0 6.0 9.9 7.4 - 12.4 19.7 344
8x 6 19.8 20.4 20.5 6.0 8.0 9.9 7.4 - 12.4 19.7 468
8 19.8 20.4 20.5 8.0 8.0 10.8 8.7 - 13.0 27.6 670
10x 8 22.4 23.0 22.0 8.0 10.0 10.8 8.7 - 13.0 27.6 758
10 22.4 23.0 22.0 10.0 10.0 13.1 10.6 - 15.2 27.6 1145
12x 10 25.5 26.1 25.0 10.0 12.0 13.1 10.6 - 15.2 27.6 1364
12 25.5 26.1 25.0 12.0 12.0 14.9 12.4 - 17.0 27.6 1740
14x 12 30.0 30.6 30.0 12.0 13.25 14.9 12.4 - 17.0 27.6 1892
16x 12 33.0 33.6 33.0 12.0 15.25 14.9 12.4 - 17.0 27.6 2222
14 30.0 30.6 30.0 13.25 13.25 15.0 13.5 - 17.3 27.6 2398
16x 14 33.0 33.6 33.0 13.25 15.25 15.0 13.5 - 17.3 27.6 2618
16 33.0 33.6 33.0 15.25 15.25 16.9 15.6 - 19.8 27.6 3256
18x 16 36.0 36.6 36.0 15.25 17.25 16.9 15.6 - 19.8 27.6 3630
20x 16 39.0 39.8 39.0 15.25 19.25 16.9 15.6 - 19.8 27.6 3784
18 36.0 36.6 36.0 17.25 17.25 17.3 18.9 - 20.3 27.6 4198
20x 18 39.0 39.8 39.0 17.25 19.25 17.3 18.9 - 20.3 27.6 4318
20 39.0 39.8 39.0 19.25 19.25 19.6 20.6 - 23.1 27.6 5038
24x 20 45.0 45.9 45.0 19.25 23.25 19.6 20.6 - 23.1 27.6 6050
22 43.0 43.9 43.0 21.25 21.25 20.6 22.1 - 24.2 27.6 6336
24 45.0 45.9 45.0 23.25 23.25 23.0 23.7 - 26.5 27.6 7942
30x 24 55.0 56.0 55.0 23.25 29.0 23.0 23.7 - 26.5 27.6 10186
26 49.0 50.0 49.0 25.0 25.0 24.9 25.7 - 31.7 24.4 1058228 53.0 54.0 53.0 27.0 27.0 26.5 26.9 - 32.6 55.1 13020
30 55.0 56.0 55.0 29.0 29.0 28.0 28.3 - 34.1 55.1 14830
36x 30 68.0 69.1 68.0 29.0 34.5 28.0 28.3 - 34.1 55.1 18330
32 60.0 61.1 60.0 30.75 30.75 29.6 29.7 - 35.7 55.1 17780
34 64.0 65.1 64.0 32.75 32.75 30.1 31.1 - 36.2 55.1 20370
36 68.0 69.1 68.0 34.5 34.5 31.5 32.2 - 37.6 55.1 22620
40 77 - 77 38.43 38.43 35.4 36.2 - 41.8 55.1 30305
42 82 - 82 40.16 40.16 38.1 37.4 - 43.3 55.1 35431
Note: Dimensions in inch. Weights in pound
SE-3SE-1
-
7/27/2019 BallValveA2-05 (1)
28/44
DHV Industries, Inc.27
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1 SE-3
Dimensions and weights Class 600
SizeL
B B1 F E G H D WGT Lb
RF RTJ WE2x 11/2 11.5 11.6 11.5 1.5 2.0 5.7 3.7 17.7 9.3 - 57
2 11.5 11.6 11.5 2.0 2.0 6.1 4.1 23.6 9.3 - 71
3x 2 14.0 14.1 14.0 2.0 3.0 6.1 4.1 23.6 9.3 - 106
3 14.0 14.1 14.0 3.0 3.0 7.7 5.1 39.4 11.0 - 132
4x 3 17.0 17.1 17.0 3.0 4.0 7.7 5.1 39.4 11.0 - 183
4 17.0 17.1 17.0 4.0 4.0 9.1 6.5 39.4 12.0 - 271
6x 4 22.0 22.1 22.0 4.0 6.0 9.1 6.5 39.4 12.0 - 372
6 22.0 22.1 22.0 6.0 6.0 9.9 7.4 - 12.0 27.6 615
8x 6 26.0 26.1 26.0 6.0 8.0 9.9 7.4 - 12.0 27.6 736
8 26.0 26.1 26.0 8.0 8.0 12.2 9.6 - 14.4 27.6 980
10x 8 31.0 31.1 31.0 8.0 10.0 12.2 9.6 - 14.4 27.6 1220
10 31.0 31.1 31.0 10.0 10.0 12.8 11.4 - 15.2 27.6 1696
12x 10 33.0 33.1 33.0 10.0 12.0 12.8 11.4 - 15.2 27.6 198212 33.0 33.1 33.0 12.0 12.0 14.9 13.5 - 17.2 27.6 2341
14x 12 35.0 35.1 35.0 12.0 13.25 14.9 13.5 - 17.2 27.6 2738
16x 12 39.0 39.1 39.0 12.0 15.25 14.9 13.5 - 17.2 27.6 2919
14 35.0 35.1 35.0 13.25 13.25 14.1 15.9 - 17.1 27.6 3037
16x 14 39.0 39.1 39.0 13.25 15.25 14.1 15.9 - 17.1 27.6 3350
16 39.0 39.1 39.0 15.25 15.25 15.6 17.4 - 18.6 27.6 3817
18x 16 43.0 43.1 43.0 15.25 17.25 15.6 17.4 - 18.6 27.6 3883
20x 16 47.0 47.2 47.0 15.25 19.25 15.6 17.4 - 18.6 27.6 4774
18 43.0 43.1 43.0 17.25 17.25 19.0 19.2 - 22.6 27.6 6044
20x 18 47.0 47.2 47.0 17.25 19.25 19.0 19.2 - 22.6 27.6 6500
20 47.0 47.2 47.0 19.25 19.25 19.8 20.7 - 23.5 27.6 7730
24x 20 55.0 55.4 55.0 19.25 23.25 19.8 20.7 - 23.5 27.6 8600
22 51.0 51.4 51.0 21.25 21.25 22.2 22.6 - 29.0 55.1 992724 55.0 55.4 55.0 23.25 23.25 23.8 24.1 - 29.9 55.1 12841
30x 24 65.0 65.5 65.0 23.25 29.0 23.8 24.1 - 29.9 55.1 13002
26 57.0 57.5 57.0 25.0 25.0 25.1 25.6 - 31.2 55.1 1301228 61.0 61.5 61.0 27.0 27.0 27.0 27.0 - 32.9 55.1 15710
30 65.0 65.5 65.0 29.0 29.0 28.6 28.6 - 34.9 55.1 18830
36x 30 82.0 82.6 82.0 29.0 34.5 28.6 28.6 - 34.9 55.1 23230
32 70.0 70.6 70.0 30.75 30.75 29.9 30.2 - 36.0 55.1 21870
34 76.0 76.6 76.0 32.75 32.75 31.3 31.7 - 37.4 55.1 25455
36 82.0 82.6 82.0 34.5 34.5 32.8 33.0 - 38.9 55.1 29765
40 85.4 - 85.4 38.43 38.43 36.1 38.6 - 47.7 55.1 40337
42 85.6 - 85.6 40.16 40.16 39.2 43.7 - 53.3 55.1 46983
SE-3SE-1
Note: Dimensions in inch. Weights in pound
-
7/27/2019 BallValveA2-05 (1)
29/44
DHV Industries, Inc. 28
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1 SE-3
Dimensions and weights Class 900
Size L B B1 F E G H D WGT LbRF RTJ WE
2x 11/2 14.5 14.6 14.5 1.5 2.0 5.7 3.7 17.7 10.3 - 121
2 14.5 14.6 14.5 2.0 2.0 6.1 4.1 23.6 10.3 - 137
3x 2 15.0 15.1 15.0 2.0 3.0 6.1 4.1 23.6 10.3 - 152
3 15.0 15.1 15.0 3.0 3.0 7.7 5.1 39.4 10.6 - 194
4x 3 18.0 18.1 18.0 3.0 4.0 7.7 5.1 39.4 10.6 - 238
4 18.0 18.1 18.0 4.0 4.0 7.9 6.5 - 11.0 19.7 282
6x 4 24.0 24.1 24.0 4.0 6.0 7.9 6.5 - 11.0 19.7 410
6 24.0 24.1 24.0 6.0 6.0 10.6 8.0 - 12.8 27.6 780
8x 6 29.0 29.1 29.0 6.0 8.0 10.6 8.0 - 12.8 27.6 967
8 29.0 29.1 29.0 8.0 8.0 11.6 10.2 - 14.0 27.6 1311
10x 8 33.0 33.1 33.0 8.0 10.0 11.6 10.2 - 14.0 27.6 154910 33.0 33.1 33.0 10.0 10.0 15.4 12.6 - 17.7 27.6 2100
12x 10 38.0 38.1 38.0 10.0 12.0 15.4 12.6 - 17.7 27.6 2480
12 38.0 38.1 38.0 12.0 12.0 17.6 14.8 - 20.5 27.6 3222
14x 12 40.5 40.9 40.5 12.0 12.75 17.6 14.8 - 20.5 27.6 3583
16x 12 44.5 44.9 44.5 12.0 14.75 17.6 14.8 - 20.5 27.6 3744
14 40.5 40.9 47.6 12.75 12.75 14.8 16.5 - 17.8 27.6 3808
16x 14 44.5 44.9 44.5 12.75 14.75 14.8 16.5 - 17.8 27.6 3960
16 44.5 44.9 44.5 14.75 14.75 18.1 18.5 - 21.6 27.6 4928
18x 16 48.0 48.5 48.0 14.75 16.75 18.1 18.5 - 21.6 27.6 6290
20x 16 52.0 52.5 52.0 14.75 18.625 18.1 18.5 - 21.6 27.6 6534
18 48.0 48.5 48.0 16.75 16.75 19.8 20.1 - 23.4 27.6 6600
20x 18 52.0 52.5 52.0 16.75 18.625 19.8 20.1 - 23.4 27.6 7480
20 52.0 52.5 52.0 18.625 18.625 21.9 22.1 - 28.0 55.1 9592
24x 20 61.0 61.7 61.0 18.625 22.5 21.9 22.1 - 28.0 55.1 12276
24 61.0 61.7 61.0 22.5 22.5 25.2 25.6 - 31.3 55.1 15466
30x 24 74.0 74.9 74.0 22.5 28.125 25.2 25.6 - 31.3 55.1 8980
26 65.0 65.9 65.0 24.375 24.375 26.8 27.1 - 32.9 55.1 8270
28 69.0 69.9 69.0 26.25 26.25 28.5 28.9 - 34.6 55.1 10200
30 74.0 74.9 74.0 28.125 28.125 30.5 31.1 - 41.2 55.1 12440
36x 30 90.0 91.1 90.0 28.125 33.75 30.5 31.1 - 41.2 55.1 15650
32 80.0 80.9 80.0 30.0 30.0 32.3 32.4 - 43.0 55.1 12100
34 85.0 86.1 85.0 31.875 31.875 33.8 33.9 - 44.4 55.1 17460
36 90.0 91.1 90.0 33.75 33.75 35.4 35.4 - 46.1 55.1 20150
Note: Dimensions in inch. Weights in pound
SE-3SE-1
-
7/27/2019 BallValveA2-05 (1)
30/44
DHV Industries, Inc.29
Trunnion Mounted Ball ValvesThree-Piece Forged Steel Body Side Entry Type SE-1 SE-
Dimensions and weights Class 1500
SizeL
B B1 F E G H D WGT LbRF RTJ WE
2x 11/2 14.5 14.6 14.5 1.5 2.0 5.7 3.7 17.7 10.3 - 1062 14.5 14.6 14.5 2.0 2.0 6.1 4.1 23.6 10.3 - 1373x 2 18.5 18.6 18.5 2.0 3.0 6.1 4.1 23.6 10.3 - 185
3 18.5 18.6 18.5 3.0 3.0 7.7 5.1 39.4 10.6 - 2584x 3 21.5 21.6 21.5 3.0 4.0 7.7 5.1 39.4 10.6 - 363
4 21.5 21.6 21.5 4.0 4.0 7.9 6.5 - 11.0 27.6 5206x 4 27.8 28.0 27.8 4.0 5.75 7.9 6.5 - 11.0 27.6 720
6 27.8 28.0 27.8 5.75 5.75 10.2 9.0 - 12.5 27.6 10908x 6 32.8 33.1 32.8 5.75 7.625 10.2 9.0 - 12.5 27.6 1372
8 32.8 33.1 32.8 7.625 7.625 13.2 11.9 - 16.1 27.6 189710x 8 39.0 39.4 39.0 7.625 9.5 13.2 11.9 - 16.1 27.6 2445
10 39.0 39.4 39.0 9.5 9.5 15.4 13.8 - 18.4 27.6 307512x 10 44.5 45.1 44.5 9.5 11.375 15.4 13.8 - 18.4 27.6 3403
12 44.5 45.1 44.5 11.375 11.375 19.4 16.8 - 22.3 27.6 440514x 12 49.5 50.2 49.5 11.375 12.5 19.4 16.8 - 22.3 27.6 576416x 12 54.5 55.4 54.5 11.375 14.25 19.4 16.8 - 22.3 27.6 6358
14 49.5 50.2 49.5 12.5 12.5 18.5 19.0 - 22.0 27.6 664416 54.5 55.4 54.5 14.25 14.25 20.6 21.2 - 24.2 27.6 937218 60.5 61.4 60.5 16.0 16.0 23.4 23.9 - 29.5 55.1 1408020 65.5 66.4 65.5 18.0 18.0 26.8 27.4 - 32.9 55.1 2046024 80.4 81.5 80.4 21.0 21.0 29.8 30.5 - 40.5 55.1 32010
Dimensions and weights Class 2500
SizeL
B B1 F E H D WGT LbRF RTJ WE
2x 11/2 17.8 17.9 17.8 1.5 1.75 5.5 3.7 7.8 11.8 1432 17.8 17.9 17.8 1.75 1.75 5.7 6.7 7.8 11.8 192
3x 2 22.8 23.0 22.8 1.75 2.5 5.7 6.7 7.8 27.6 3633 22.8 23.0 22.8 2.5 2.5 7.5 8.1 9.6 27.6 473
4x 3 26.5 26.9 26.5 2.5 3.5 7.5 8.1 9.6 27.6 714
4 26.5 26.9 26.5 3.5 3.5 8.9 9.4 11.0 27.6 8976x 4 36.0 36.5 36.0 3.5 5.25 8.9 9.4 11.0 27.6 1188
6 36.0 36.5 36.0 5.25 5.25 12.0 11.2 15.0 27.6 18268x 6 40.2 40.9 40.2 5.25 7.125 12.0 11.2 15.0 27.6 2379
8 40.2 40.9 40.2 7.125 7.125 15.7 14.6 18.7 27.6 315710x 8 50.0 50.9 50.0 7.125 8.875 15.7 14.6 18.7 27.6 3850
10 50.0 50.9 50.0 8.875 8.875 18.5 17.1 22.0 27.6 488412x 10 56.0 56.9 56.0 8.875 10.5 18.5 17.1 22.0 27.6 5830
12 56.0 56.9 56.0 10.5 10.5 21.3 19.5 27.2 24.4 7370
Note: Dimensions in inch. Weights in pound
SE-3SE-1
-
7/27/2019 BallValveA2-05 (1)
31/44
DHV Industries, Inc.
24
30
Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Top Entry
Component Parts Lists
1 BODY2 BONNET
3 BALL WITH STEM/TRUNNION
4 SEAT INSERT
5 SEAT RETAINER
6 SEAT SPRING
7 GLAND
8 GLAND RING
9 LOW COVER
10 O-RING
11 O-RING
12 O-RING
13 O-RING
14 O-RING
15 BACK UP RING
16 GASKET
17 GASKET
18 BACK UP RING
19 SEALANT FITTING
20 PACKING
21 THRUST BEARING
22 STEM KEY
23 STEM BEARING
24 LEVER BAR
25 STUD
26 NUT
27 INTERNAL CHECK VALVE
28 HEAD BOLT
29 PACKING
30 CLOSURE PIN
31 THREE WAY HEAD
32 SNAP RING
33 DRAIN FITTING
34 ANTI-STATIC DEVICE
35 SEALANT FITTING
-
7/27/2019 BallValveA2-05 (1)
32/44
DHV Industries, Inc.
Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Top Entr
Material Specification
Carbon St. Body Stainless St. Body
No. Parts NameCS NACE TRIM S.S. TRIM Duplex S.S. / SUPER Duplex S.S. TRIM
S.S TRIMSOUR SERVICE SOUR SERVICE SOUR SERVICE SOUR SERVICE
1 Body A216 WCB / +ENP A216 WCB+ENP A351 CF8M / CF8
2 Bonnet
3Ball C.S+ENP A182 F6 / 316SS / 304SS A182 F51 / F53+HCr 316SS / 304SS
Stem / Trunnion C.S+ENP A182 F6 / 316SS / 304SS A182 F51 / F53+HCr 316SS / 304SS
4 Seat Insert PTFE / R-PTFE / NYLON / DEVLON / PEEK
5 Seat Retainer A105+ENP A182 F6 / 316SS / 304SS A182 F51 / F53 316SS / 304SS
6 Seat Spring INCONEL X750
7 Gland A105 / A105+ENP 316 SS / 304SS
8 Injection Fitting 4140 / 316SS (with an Internal Check Valve) 316 SS
9 Lower Cover A105 + ENP 316 SS / 304 SS
12 O-ring VITON-B
15 Backup Ring R-PTEE
17 Gasket Metal Backed PTFE / Graphite
20 Packing Graphite
23 Stem Bearing R-PTFE
25 Stud A193 B7M A193 B8 / B8M
26 Nut A194 2HM A194 8 / 8M
33 Drain Fitting 316SS
34 Anti-Static Device STAINLESS STEEL
31
Note: Other Material Standard can be Supplied Upon Request.
T.C: TUNGSTEN-CARBIDE HCr: HARD CHROMIUM PLATING
-
7/27/2019 BallValveA2-05 (1)
33/44
DHV Industries, Inc.
Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Class 150/300 Top Entry
Class 150 / 300 NPS 11/2FP 2RP 2FP 3RP 3FP 4RP 4FP 6RP 6FP 8RP 8FP 10RP 10FP 12RP 12FP
Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0
Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305
L 150LB 241 178 292 203 356 229 432 394 559 457 660 533 787 610 838
(mm) 300LB 241 216 292 283 356 305 432 403 559 502 660 568 787 648 838
inch 3.5 3.5 4.1 4.1 4.9 4.9 5.9 5.9 7.2 7.2 10.8 10.8 12.5 12.5 14.3H1
mm 90 90 105 105 125 125 151 151 184 184 274 274 318 318 362
inch 4.9 4.9 5.6 5.6 7.7 7.7 8.6 8.6 11.3 11.3 16.0 16.0 17.7 17.7 20.1H2
mm 125 125 142 142 195 195 219 219 286 286 407 407 450 450 510
inch 17.7 17.7 17.7 17.7 23.6 23.6 23.6 23.6 39.4 39.4 - - - - -
C mm 450 450 450 450 600 600 600 600 1000 1000 - - - - -
inch - - - - - - - - - - 19.7 19.7 19.7 19.7 27.6D
mm - - - - - - - - - - 500 500 500 500 700
Weight 150LB 14.2 10.3 24.5 19.8 44 37 87 80 194 182 382 369 613 595 886
(kg) 300LB 16.4 12.6 30 25.2 52 47 100 94 208 201 405 400 668 656 923
Class 150 / 300
NPS 14FP 14RP 16FP 16RP18FP 18RP 20FP 20RP 24FP 26FP 28FP 30FP 32FP 34FP 36FP
Bore inch 12 13.25 13.25 15.25 15.25 17.25 17.25 19.25 23.25 25 27 29 30.75 32.75 34.5
Size mm 305 337 337 387 387 438 438 489 591 635 686 737 781 832 876
L 150LB 889 686 991 762 1092 864 1194 914 1397 1448 1549 1651 1778 1930 2083
(mm) 300LB 889 762 991 838 1092 914 1194 991 1397 1448 1549 1651 1778 1930 2083
inch 14.3 16.9 16.9 17.7 17.7 18.6 18.6 22.8 23.6 25.0 27.6 30.5 32.5 34.6 36.6H1
mm 362 428 428 450 450 473 473 580 600 635 700 775 825 880 930
inch 20.1 20.4 20.4 20.4 20.4 22.7 22.7 24.6 27.4 30.1 32.5 34.1 39.8 41.2 43.4H2
mm 510 517 517 519 519 577 577 626 696 765 825 865 1012 1047 1103
inch - - - - - - - - - - - - - - -C
mm - - - - - - - - - - - - - - -
inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 24.4 24.4 24.4D
mm 700 700 700 700 700 700 700 700 700 700 700 700 620 620 620
Weight 150LB 955 795 1160 955 1800 1570 2440 2000 3300 3970 4755 5820 7240 7960 9300
(kg) 300LB 1120 932 1518 1360 2110 1840 2860 2340 3870 4655 5575 6825 8490 9335 10900
32
Note: more sizes available upon request.
Dimension and Weights
-
7/27/2019 BallValveA2-05 (1)
34/44
DHV Industries, Inc.33
Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Class 600 Top Entr
Class 600 NPS 11/2FP 2RP 2FP 3RP 3FP 4RP 4FP 6RP 6FP 8RP 8FP 10RP 10FP 12RP 12FP
Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0
Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305
inch 9.5 11.5 11.5 14.0 14.0 17.0 17.0 22.0 22.0 26.0 26.0 31.0 31.0 33.0 33.0L
mm 241 292 292 356 356 432 432 559 559 660 660 787 787 838 838
inch 3.5 3.5 4.1 4.1 4.9 4.9 5.9 5.9 7.2 7.2 10.8 10.8 12.5 12.5 14.3H1
mm 90 90 105 105 125 125 151 151 184 184 274 274 318 318 362
inch 4.9 4.9 5.6 5.6 7.7 7.7 8.6 8.6 11.3 11.3 16.0 16.0 17.7 17.7 20.1H2
mm 125 125 142 142 195 195 219 219 286 286 407 407 450 450 510
inch 17.7 17.7 23.6 23.6 39.4 39.4 39.4 39.4 - - - - - - -
C mm 450 450 600 600 1000 1000 1000 1000 - - - - - - -
inch - - - - - - - - 27.6 27.6 27.6 27.6 27.6 27.6 27.6D
mm - - - - - - - - 700 700 700 700 700 700 700
Weight kg 19.5 21 36 46 63 85 109 152 236 301 423 506 694 740 977
Note: more sizes available upon request.
Dimension and Weights
Class 600
NPS 14FP 14RP 16FP 16RP18FP 18RP 20FP 20RP 24FP 26RP 28FP 30RP
Bore inch 12 13.25 13.25 15.25 15.25 17.25 17.25 19.25 23.25 25 27 29
Size mm 305 337 337 387 387 438 438 489 591 635 686 737
Linch 35 35 39 39 43 43 47 47 55 57 61 65
mm 889 889 991 991 1092 1092 1194 1194 1397 1448 1549 1651
inch 14.3 16.9 16.9 17.7 17.7 18.6 18.6 22.8 23.6 25.0 27.6 30.5H1mm 362 428 428 450 450 473 473 580 600 635 700 775
inch 20.1 20.7 20.7 22.4 22.4 24.8 24.8 26.9 31.8 34.6 37.2 39.6H2
mm 510 526 526 568 568 629 629 682 808 880 945 1005
inch - - - - - - - - - - - -C
mm - - - - - - - - - - - -
inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 55.1 55.1 55.1 55.1D
mm 700 700 700 700 700 700 700 700 1400 1400 1400 1400
Weight (kg) 1230 1190 1430 1735 1940 2350 2700 3000 4950 5950 7130 8730
-
7/27/2019 BallValveA2-05 (1)
35/44
DHV Industries, Inc. 34
Class 900
NPS 11/2FP 2RP 2FP 3RP 3FP 4RP 4FP 6RP 6FP 8RP 8FP 10RP 10FP 12RP 12FP
Bore inch 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 6.0 6.0 8.0 8.0 10.0 10.0 12.0
Size mm 38 38 51 51 76 76 102 102 152 152 203 203 254 254 305
inch 12.0 14.5 14.5 15.0 15.0 18.0 18.0 24.0 24.0 29.0 29.0 33.0 33.0 38.0 38.0L
mm 305 368 368 381 381 457 457 610 610 737 737 838 838 965 965
inch 3.6 3.6 4.3 4.3 5.2 5.2 6.3 6.3 7.8 7.8 11.1 11.1 13.1 13.1 15.2H1
mm 92 92 110 110 133 133 160 160 197 197 282 282 334 334 387
inch 6.1 6.1 7.7 7.7 8.7 8.7 10.7 10.7 12.8 12.8 17.3 17.3 20.1 20.1 21.7H2
mm 155 155 195 195 220 220 272 272 325 325 440 440 510 510 550
inch 17.7 17.7 23.6 23.6 39.4 39.4 - - - - - - - - -C mm 450 450 600 600 1000 1000 - - - - - - - - -
inch - - - - - - 19.7 19.7 27.6 27.6 27.6 27.6 27.6 27.6 27.6D
mm - - - - - - 500 500 700 700 700 700 700 700 700
Weight kg 32 40 56 62 78 103 128 168 260 320 452 557 727 778 1105
Class 900
NPS 14FP 14RP 16FP 16RP 18FP 18RP 20FP 20RP 24FP
Bore inch) 12.0 12.75 12.75 14.75 14.75 16.75 16.75 18.625 22.5
Size mm 305 324 324 375 375 425 425 473 572
inch 40.5 40.5 44.5 44.5 48.0 48.0 52.0 52.0 61.0L
mm 1029 1029 1130 1130 1219 1219 1321 1321 1549
inch 15.2 17.3 17.3 18.3 18.3 19.1 19.1 23.6 24.4H1
mm 387 440 440 465 465 485 485 600 620
inch 21.7 21.5 21.5 23.8 23.8 25.6 25.6 30.5 32.9H2
mm 550 545 545 605 605 650 650 775 835
inch - - - - - - - - -C
mm - - - - - - - - -
inch 27.6 27.6 27.6 27.6 27.6 27.6 27.6 55.1 55.1D
mm 700 700 700 700 700 700 700 1400 1400
Weight kg 1855 1800 2160 2650 2925 3550 4100 4530 7450
Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Class 900 Top Entry
Note: more sizes available upon request.
-
7/27/2019 BallValveA2-05 (1)
36/44
DHV Industries, Inc.35
Class 1500
NPS 11/2FP 2RP 2FP 3RP 3FP 4RP 4FP 6RP 6FP 8RP 8FP 10RP 10FP 12RP 12FP
Bore inch) 1.5 1.5 2.0 2.0 3.0 3.0 4.0 4.0 5.75 5.75 7.625 7.625 9.5 9.5 11.375
Size mm 38 38 51 51 76 76 102 102 146 146 194 194 241 241 289
inch 12.0 14.5 14.5 18.5 18.5 21.5 21.5 27.8 27.8 32.8 32.8 39.0 39.0 44.5 44.5L
mm 305 368 368 470 470 546 546 705 705 832 832 991 991 1130 1130
inch 3.7 3.7 4.5 4.5 5.3 5.3 6.5 6.5 8.0 8.0 11.6 11.6 14.0 14.0 15.9H1
mm 95 95 114 114 135 135 166 166 202 202 295 295 355 355 404
inch 6.4 6.4 7.9 7.9 9.2 9.2 11.3 11.3 13.7 13.7 18.7 18.7 21.3 21.3 23.1H2
mm 162 162 200 200 233 233 286 286 347 347 474 474 542 542 586
inch 17.7 17.7 23.6 23.6 39.4 39.4 - - - - - - - - -C mm 450 450 600 600 1000 1000 - - - - - - - - -
inch - - - - - - 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6D
mm - - - - - - 700 700 700 700 700 700 700 700 700
Weight kg 32 40 56 78 96 140 180 220 318 377 495 606 777 811 1324
Trunnion Mounted Ball ValvesOne-Piece, Cast Steel Body, Class 1500 Top Entry
Note: more sizes available upon request.
Class 1500
NPS 14FP 14RP 16FP 16RP 18FP 18RP 20FP 20RP 24FP
Bore inch) 11.375 12.5 12.5 14.25 14.25 16.0 16.0 18.0 21.0
Size mm 289 318 318 362 362 407 407 457 534
inch 49.5 49.5 54.5 54.5 60.5 60.5 65.5 65.5 80.4L
mm 1257 1257 1384 1384 1537 1537 1664 1664 2043
inch 15.9 18.4 18.4 19.5 19.5 20.5 20.5 25.2 25.2H1
mm 404 467 467 495 495 520 520 639 640
inch 23.1 22.6 22.6 24.4 24.4 29.1 29.1 31.3 38.5H2
mm 586 575 575 620 620 740 740 795 979
inch - - - - - - - - -C
mm - - - - - - - - -
inch 27.6 27.6 27.6 27.6 27.6 55.1 55.1 55.1 55.1D
mm 700 700 700 700 700 1400 1400 1400 1400
Weight kg 2780 2700 3240 3980 4653 5325 6063 6800 11900
-
7/27/2019 BallValveA2-05 (1)
37/44
DHV Industries, Inc. 36
Fully Welded Ball Valves
Specifications
Basic Design: ANSI B16.34 , API-6D
End to End: ANSI B16.10 , API-6D
Butt Weld End: ANSI B16.25
NO. DESCRIPTION
1 BODY
2 BALL
3 STEM
4 INNER SEAT RING
5 OUTER SEAT RING
6 SEAT O-RING
7 O-RING
8 BODY O-RING
9 GRAPHITE PACKING
10 STEM O-RING
11 GLAND O-RING
12 TRUNNION O-RING
13 END PIECE
14 SEAT COIL SPRING
15 TRUNNION
16 WRENCH BOLT
17 SEAT KEY
18 U-CUP RING
19 DRAIN FITTING
20 GREASE FITTING W / CHECK VALVE
21 RELIEF VALVE
22 GLAND FLANGE
23 WASHER
24 GLAND BUSHING
25 GLAND
26 GREASE FITTING(SEALANT INJECTOR)
27 STEM KEY
28 DOWEL PIN29 DRY BEARING
30 THRUST WASHER
31 BEARING RETAINER
Material Specification
1/13Body CS ASTM A216-WCB, A106 Gr. B, A105, A352-LCB
End Piece SS ASTM A351-CF8 CF8M, A182-F304 F316
2 BallCS A105, A216-WCB, A352-LCB+ENP
SS ASTM A351-CF8 / CF8M, AISI 304 / 316, A217-CA15
3 StemCS A105 + ENP, AISI 4140+ENP
SS, AISI 304 / 316
Metal Seat With Insert Ring
4 Seats CS A36 / A216+Nickel Coating
SS ASTM A351-CF8,CF8M / AISI 304, 316
5-12 Seals Graphite, PTFE, FPM etc.,
14 Spring Inconel X-750
15 Trunnion AISI 304 316 or Equivalent
16 Stud / Nuts A193-B7 A194-2H, A193-B7M A194-2HM, A320-L7M A194-7M
16
22
9
24
25
11
27
1
13
14
718 17
4
6
5
23
10
26
3
28
8
4
2
29
30
3119
12
15
20
21
Note:all materials may be adjustable at User's request.
-
7/27/2019 BallValveA2-05 (1)
38/44
DHV Industries, Inc.37
Fully Welded Ball Valves
Dimensions and weights
Class Size D L H1 H L1 WG.
in mm in mm in mm in mm in mm lb kg
2 2.00 51 8.5 216 3.23 82 4.17 106 12 305 41 19
3 3.00 76 11.1 283 4.57 116 5.24 133 17.7 450 73 33
4 4.00 102 12 305 5.55 141 6.26 159 36 915 114 52
6 6.00 152 18 457 11.9 301 8.46 215 - - 385 175
8 8.00 203 20.5 521 13.4 340 9.92 252 - - 444 20210 10 254 22 559 14.9 378 11.6 295 - - 572 260
12 12 305 25 635 16.4 417 13.5 342 - - 902 410
14 13.3 337 30 762 18.3 466 14.7 373 - - 1302 592
150 16 15.2 387 33 838 19.9 506 16.3 414 - - 1969 895
LB 18 17.2 438 36 914 21.5 545 18 458 - - 2638 119
20 19.3 489 39 991 23.1 586 19.4 492 - - 3408 154
22 21.3 540 43 1092 24.8 631 21.1 537 - - 4510 205
24 23.3 591 45 1143 26.3 669 22.6 573 - - 5698 259
26 25 635 49 1245 28.3 718 24.5 622 - - 7016 318
28 27 686 53 1346 29.6 752 25.9 658 - - 8479 385
30 29 737 55 1397 31.7 805 27.4 697 - - 9680 440
32 30.7 781 60 1524 33.2 844 29 736 - - 11636 528
34 32.8 832 64 1626 34.4 873 30.9 784 - - 13640 620
2 2.00 51 8.5 216 3.23 82 4.17 106 17.7 405 46 21
3 3.00 76 11.1 283 4.57 116 5.24 133 36 915 77 35
4 4.00 102 12 305 5.55 141 6.26 159 36 915 150 68
6 6.00 152 15.9 403 11.9 301 8.46 215 - - 422 192
8 8.00 203 20.5 521 13.4 340 9.92 252 - - 464 211
10 10 254 22 559 14.9 378 11.6 295 - - 638 290
12 12 305 25 635 16.4 417 13.5 342 - - 856 389
14 13.3 337 30 762 18.3 466 14.7 373 - - 1342 610
300 16 15.2 387 33 838 19.9 506 16.3 414 - - 1980 900LB 18 17.2 438 36 914 21.5 545 18 458 - - 2849 129
20 19.3 489 39 991 23.1 586 19.4 492 - - 3606 163
22 21.3 540 43 1092 24.8 631 21.1 537 - - 4796 218
24 23.3 591 45 1143 26.3 669 22.6 573 - - 6028 274
26 25 635 49 1245 28.3 718 24.5 622 - - 7480 340
28 27 686 53 1346 29.6 752 25.9 658 - - 8943 406
30 29 737 55 1397 31.7 805 27.4 697 - - 10340 470
32 30.7 781 60 1524 33.2 844 29 736 - - 12100 550
34 32.8 832 64 1626 34.4 873 30.9 784 - - 14740 670
-
7/27/2019 BallValveA2-05 (1)
39/44
DHV Industries, Inc. 38
Fully Welded Ball Valves
Dimensions and weights
Class Size D L H1 H L1 WG.
in mm in mm in mm in mm in mm lb kg
2 2 51 11.5 292 3.35 85 4.17 106 24 610 51 23
3 3 76 14 356 4.72 120 6.1 155 35.4 900 108 49
4 4 102 17 432 5.71 145 7.48 190 47.2 1200 211 96
6 6 152 22 559 12.2 310 8.46 215 - - 530 241
8 8 203 26 660 13.78 350 9.92 252 - - 550 250
10 10 254 31 787 15.35 390 11.6 295 - - 759 345
12 12 305 33 838 16.93 430 13.5 342 - - 1166 530
14 13.3 337 35 889 18.9 480 14.7 373 - - 1716 780
600 16 15.2 387 39 991 20.55 522 16.3 414 - - 2640 1200
LB 18 17.2 438 43 1092 22.13 562 18 458 - - 3520 1600
20 19.3 489 47 1194 23.78 604 19.4 492 - - 4477 2035
22 21.3 540 51 1295 25.59 650 21.1 537 - - 5940 2700
24 23.3 591 55 1397 27.17 690 22.6 573 - - 7464 3392
26 25 635 57 1448 29.13 740 24.5 622 - - 9130 415028 27 686 61 1549 30.51 775 25.9 658 - - 11220 5100
30 29 737 65 1651 32.68 830 27.4 697 - - 12720 5782
32 30.7 781 70 1778 34.25 870 29 736 - - 15180 6900
34 32.8 832 76 1930 35.43 900 30.9 784 - - 18117 8235
2 2.0 51 14.5 368 3.46 88 4.69 119 24 610 88 40
3 3.0 76 15 381 4.92 125 6.1 155 35.4 900 136 62
4 4.0 102 18 457 5.94 151 7.48 190 47.2 1200 231 105
6 6.0 152 24 610 9.84 250 9.49 241 - - 656 298
8 8.0 203 29 737 11.42 290 10.83 275 - - 726 330
10 10 254 33 838 13.58 345 12.48 317 - - 924 420
12 12 305 38 965 15.35 390 14.37 365 - - 1386 630
14 12.75 324 40.5 1029 17.72 450 15.31 389 - - 2068 940
16 14.75 375 44.5 1130 19.69 500 16.89 429 - - 3190 1450900 18 16.75 425 48 1219 21.65 550 19.13 486 - - 4246 1930
LB 20 18.75 476 52 1321 23.31 592 20.87 530 - - 5500 2500
22 20.63 524 - - 25.79 655 21.93 557 - - 7150 3250
24 22.5 572 61 1549 27.48 698 24.33 618 - - 8976 4080
26 24.38 619 - - 29.92 760 26.26 667 - - 11022 5010
28 26.25 667 - - 31.89 810 27.91 709 - - 13332 6060
30 28.13 715 - - 32.8 833 29.65 753 - - 14740 6700
32 30.00 762 - - 35.83 910 31.93 811 - - 18370 8350
34 31.88 810 - - 37.8 960 33.35 847 - - 21626 9830
2 2.0 51 14.5 368 4.29 109 4.69 119 23.6 600 97 44
3 3.0 76 18.5 470 6.06 154 6.1 155 35.4 900 196 89
4 4.0 102 21.5 546 7.32 186 7.48 190 47.2 1200 330 150
6 5.75 146 27.8 705 12.6 320 11.02 280 - - 746 339
8 7.63 194 32.8 832 14.61 371 12.87 327 - - 836 38010 9.50 241 39 991 17.4 442 15.43 392 - - 1098 499
12 11.38 289 44.5 1130 19.65 499 16.65 423 - - 1672 760
14 12.50 318 49.5 1257 22.68 576 19.65 499 - - 2442 1110
16 14.25 362 54.5 1384 25.2 640 21.97 558 - - 3718 1690
1500 18 16.26 413 - - 27.72 704 23.19 589 - - 5104 2320
LB 20 17.99 457 - - 29.84 758 28.5 724 - - 6468 2940
22 19.76 502 - - 32.99 838 30.2 767 - - 8554 3888
24 21.61 549 - - 35.16 893 32.01 813 - - 10780 4900
26 23.5 597 - - 38.31 973 35.47 901 - - 13200 6000
28 25.24 641 - - 40.83 1037 37.05 941 - - 16060 7300
30 27.01 686 - - 41.97 1066 40.75 1035 - - 18458 8390
32 28.74 730 - - 45.87 1165 41.73 1060 - - 21956 9980
34 30.51 775 - - 48.39 1229 44.88 1140 - - 26180 11900
-
7/27/2019 BallValveA2-05 (1)
40/44
DHV Industries, Inc.39
Material Specification
Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valv
Design Features
One-Piece Body
Top Entry
Rising Stem Type Downstream Seal
Low Torque, low Emission
Long Service Life
Specifications
Basic Design: ANSI B16.34
Face to Face: DHV Standard
ANSI B16.10
End Flanged: ANSI B16.5
BW End: ANSI B16.25
Test and Inspection: API 598, API 6D
Note: Other Material Standard can be Supplied Upon Request
Core rotated to 90 without
touching the seatFull Close Position
Full Open PositionCore rotated against
guide pins
Carbon St. Body Stainless St. Body
No. Parts Name CS NACE TRIM S.S. TRIMDuplex S.S. / SUPER S.S. TRIM
Duplex S.S. TRIMSOUR SERVICE SOUR SERVICE
SOUR SERVICE SOUR SERVICE
1 BodyA216 WCB / WCC / WC6/ WC9 + ENP A351 CF8 / CF8M
2 Bonnet
3 Seat A105+STL 13Cr / 304SS / 316SS+STL A182 F51 / F53+STL A182 F304 / F316+ST
4 Core WCB+STL CA15 / CF8 / CF8M+STL A890 4A / 5A+STL CF8 / CF8M+STL
5 Stem 17-4PH A182 F51 / F53 17-4PH
6 Support Pin CARBON STEEL STAINLESS STEEL
7 Core Pin 304SS / 316SS / 17-4PH
8 Bonnet Bushing 13Cr / 17-4PH A182 F51 / F53 17-4PH
9 O-Ring VITON-B10 Gasket Sprial Woud 316SS Graphite
11 Trunnion Bush 17-4PH A182 F51 / F53 304SS / 316SS/ 17-4P
12 Bolts A193 B7M A193 B8 / B8M
13 Nuts A194 2HM A194 8 / 8M
14 Packing Graphite
15 Gland A216 WCB / WCC / WC6/ WC9 A351 CF8 / CF8M
16 Gland Eyebolt A193 B7M A193 B8 / B8M
17 Nuts A194 2HM A194 8 / 8M
18 Stem Guide 17-4PH A182 F51 / F53 17-4PH
19 Bearing Cover CARBON STEEL STAINLESS STEEL
20 Stem Nut A439 D2
21 Bearing STEEL+PTFE
22 Handwheel Cast Iron
23 Indicator STAINLESS STEEL
Upstream Downstream
-
7/27/2019 BallValveA2-05 (1)
41/44
DHV Industries, Inc. 40
Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valve, Full Bore
Dimensions 150LB NPS 3/4 1 11/2 2 3 4 6 8 10 12 16 18 20 24 28
Bore in 0.75 1 1.5 2 3 4 6 8 10 12 15.25 17.25 19.25 23.25 27.25 Size mm 19 25 38 51 76 102 152 203 254 305 387 438 489 591 692
Lin 4.6 8.5 9.5 7.0 8.0 12.0 15.9 18.0 26.5 30.0 35.5 43.0 49.2 57.1 66.9
mm 117 216 241 178 203 305 403 457 673 762 902 1092 1250 1450 1700
H1in 9.8 11.8 13.8 15.0 17.7 19.7 23.6 25.6 - - - - - - -
mm 250 300 350 380 450 500 600 650 - - - - - - -
H2in - - - - - - - - 27.6 33.5 51.2 57.1 63.0 74.8 82.7
mm - - - - - - - - 700 850 1300 1450 1600 1900 2100
Dimensions 300LB NPS 3/4 1 11/2 2 3 4 6 8 10 12 14 16 20 24 28
Bore in 0.75 1 11/2 2 3 4 6 8 10 12 13.23 15.25 19 23 27Size mm 19 25 38 51 76 102 152 203 254 305 337 387 483 584 686
L
in 6.0 8.5 9.5 8.5 11 12.0 15.9 19.8 26.5 30.0 32.5 35.5 47.0 57.1 66.9
mm 152 216 241 216 282 305 403 502 673 762 826.0 902 1194 1450 1700
H1in 12.6 13.8 15.7 17.7 21.7 23.6 27.6 29.5 - - - - - - -
mm 320 350 400 450 550 600 700 750 - - - - - - -
H2in - - - - - - - - 31.5 39.4 47.2 55.1 66.9 78.7 86.6
mm - - - - - - - - 800 1000 1200.0 1400 1700 2000 2200
Dimensions 600LB
NPS 3/4 1 11/2 2 3 4 6 8 10 12 16 20 24 28Bore in 0.75 1 11/2 2 3 4 6 7.87 9.75 11.75 14.75 18.25 22 25.5Size mm 19 25 38 51 76 102 152 200 248 298 381 479 575 648
Lin 7.5 8.5 9.5 11.5 14.0 17.0 22.0 26.0 31.0 33.0 39.0 47.0 55.0 61.0
mm 190 216 241 292 356 432 559 660 787 838 991 1194 1397 1549
H1in 11.8 12.6 15.0 15.7 19.7 21.7 25.6 27.6 - - - - - -
mm 300 320 380 400 500 550 650 700 - - - - - -
H2in - - - - - - - 27.6 33.5 39.4 59.1 70.9 82.7 90.6
mm - - - - - - - 700 850 1000 1500 1800 2100 2300
Dimensions 900LB
NPS 3/4 1 11/2 2 3 4 6 8 10 12 16 20Bore in 0.69 0.87" 1.37 1.87 2.87 3.87 5.75 7.5 9.37 11.12 14 17.5Size mm 18 22 35 47 73 98 146 191 234 282 356 445
Lin 9.0 10.0 12.0 14.6 15.1 18.1 24.1 29.1 33.1 38.1 44.9 52.0
mm 229 254 305 371 384 460 613 740 841 968 1140 1321
H1in 11.8 12.6 15.0 15.7 19.7 21.7 25.6 - - - - -
mm 300 320 380 400 500 550 650 - - - - -
H2in - - - - - - - 27.6 33.5 39.4 59.1 59.1
mm - - - - - - - 700 850 1000 1500 1500
H
L
H2
L
-
7/27/2019 BallValveA2-05 (1)
42/44
DHV Industries, Inc.
Rising Stem Ball ValvesOne-Piece, Cast Steel Body, Special Ball Valve, Reduced Bor
Dimensions 150LB NPS 2x11/2 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 18x16 20x16
Bore in 1.5 2 3 4 6 8 10 12 12 15.25 15.25 Size mm 38 51 76 102 152 203 254 305 305 387 387
Lin 7.0 8.0 9.0 15.5 18.0 21.0 30.0 32.5 35.5 36.0 39.0
mm 178 203 229 394 457 533 762 826 902 914 991
H1in 13.8 15.0 17.7 19.7 23.6 25.6 - - - - -
mm 350 380 450 500 600 650 - - - - -
H2in - - - - - - 27.6 33.5 33.5 51.2 51.2
mm - - - - - - 700 850 850 1300 1300
Dimensions 300LB NPS 2x11/2 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 18x16 20x16 24x20
Bore in 1.5 2 3 4 6 8 10 12 12 15.25 15.25 19 Size mm 38 51 76 102 152 203 254 305 305 387 387 483
L
in 8.5 11.1 12.0 15.9 19.8 22.4 30.0 32.5 35.5 36.0 39.0 55.0
mm 216 282 305 403 502 568 762 826 902 914 991 1397
H1in 15.7 17.7 21.7 23.6 27.6 29.5 - - - - - -
mm 400 450 550 600 700 750 - - - - - -
H2in - - - - - - 31.5 39.4 39.4 55.1 55.1 66.9
mm - - - - - - 800 1000 1000 1400 1400 1700
Dimensions 600LB NPS 2x11/2 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 18x16 20x16 24x20
Bore in 1.5 2 3 4 6 7.87 9.75 11.75 11.75 14.75 14.75 18.25Size mm 38 51 76 102 152 200 248 298 298 381 381 479
Lin 11.5 14.0 17.0 22.0 26.0 31.0 33.0 35.0 39.0 43.0 47.0 55.0
mm 292 356 432 559 660 787 838 889 991 1092 1194 1397
H1in 15.0 15.7 19.7 21.7 25.6 27.6 - - - - - -
mm 380 400 500 550 650 700 - - - - - -
H2in - - - - - 27.6 33.5 39.4 39.4 59.1 59.1 70.9
mm - - - - - 700 850 1000 1000 1500 1500 1800
Dimensions 900LB NPS 3x2 4x3 6x4 8x6 10x8 12x10 14x12 16x12 18x16 20x16 24x20
Bore in 1.87 2.87 3.87 5.75 7.5 9.37 11.12 11.12 14 14 17.5 Size mm 47 73 98 146 191 234 282 282 356 356 445
Lin 15.1 18.1 24.1 29.1 33.1 38.1 40.9 44.9 48.5 52.5 61.0
mm 384 460 613 740 841 968 1038 1140 1232 1334 1549
H1in 15.7 19.7 21.7 25.6 - - - - - - -
mm 400 500 550 650 - - - - - - -
H2in - - - - 27.5 33.4 39.3 47.2 59.0 59.0 59.0
mm - - - - 700 850 1000 1200 1500 1500 1500
41
H
L
H2
L
-
7/27/2019 BallValveA2-05 (1)
43/44
DHV Industries, Inc.
Terms & Conditions
QuotationAll prices are F.O.B. shipping point unless otherwise agreed or specified in the quotation. Prices are valid
only for the duration indicated in the quotation and are subject to change without notice. Prices also do
not include any federal, state or local taxes or other government charges.
Design changesWe reserve the right to institute changes in material ,design and specification without notice.
Cancellation or changes
Orders placed with us are not subject to cancellation or changes without our prior consent. A cancellation
charge or a price adjustment will be applicable unless otherwise agreed.
DeliveryWe will not be responsible for delays or failure to deliver due to causes beyond our control.Delivery of
material to a common carrier shall be considered delivery to the Buyer .Claims for loss or any damage to
material in transit shall be filed by the Buyer direct with the carrier. Claims for any shortage, corrections
or deductions must be made in writing within 10 days after receipt of goods.
Return of goods
Any return of goods will not be accepted without our prior authorization.Return goods should be of ourmanufacture, in clean and salable condition. A minimum charge of 35 Percent of the invoice price will be
made to cover the cost of handling and reconditioning. The freight for return goods shall be prepaid by
Buyer.
Limited warrantyDHV Industries,Inc. warrants to the original Buyer, not any third party, for products of our manufacture,
for a period of one year after date of shipment, that its products will be free from defects in materials and
workmanship under proper and normal use.
Any claim for defect goods should be by written notice to DHV Industries,Inc. immediately upon discovery.
NO warranty shall apply to our product which has been modified or changed in design or function,
misused, or improperly maintained. DHV Industries,Inc.shall be able to inspect claimed defects at origi-
nal buyers facility to determine its obligation.Without authorization of DHV Industries,Inc. any repair
labor or material is not allowed. No goods may be returned without permission from DHV Industries,Inc.
This warranty does not extend beyond original sale price and does not extend to any claim for labor.
Consequential damages, losses,whether directly or indirectly suffered or in any other manner relating to
the defects.
42
-
7/27/2019 BallValveA2-05 (1)
44/44
DHV Industries, Inc.3451 Pegasus Driver Bakersfield. CA 93308 U.S.A.
Call Toll Free: (877) DHV-USA1
Phone: (661) 392-8948 Fax: (661) 392-8947
E-mail: [email protected]
Website: www.dhvindustries.com
DHV Valve Company Inc.
10810 W. Little York, Suite 120 Houston, TX. 77041 U.S.