bicycle tool catalog vol.14
Post on 07-Feb-2016
Embed Size (px)
DESCRIPTIONbicycle tool catalog
HEAD & FORK
10,3959,900C-371 BMXHG/IG/UG 11S
This is an epoch-making chain tool! The chain for bicycles has various size and a lot of shapes. So an exclusive chain tool was necessary for each. There are some chain tools which can work for several size of chains, but it's necessary to adjust the tool on you own. This chain tool can adjust automatically, therefore you can work easily and quickly without minding the kind of chain. It supports everything from a fat chain fo BMX, E-bike, MTB, to 11 speed of Campy. This is the only chain tool you will ever need.
Applicable chain sizes : 1/2-1/8, 1/2-3/32, 1/2-3/16Weight : 280gAttachment : Replacement pin 1
Peening attachment 1
#35#50 1/21/8 410530165mm150g
The P-220 Chain Pliers is a tool specially designed for a Chain-Joint. It can be used for a single speed and fixed-gear bicycles.The tip shape is exclusively for working on Chain-Joint smoothly, quickly and without trouble.And the magnetized body prevents a Chain-Joint clip from free fly.
Applicable chain sizes : 1/2-1/8O.A.L. : 165mmWeight : 150g
#35#60 1/21/8 410630165mm150g
Special designed chain pliers for clip-jointed chain. You can attach/detach chain clip easily by using steped shape tip. Tip has step on front and side, so P-221 can contact to chain by any direction.
O.A.L. : 165mmWeight : 150g
This is a new pedal wrench designed specially for hexagon axles pedal. Round shaped long grip transmit your power efficiently to offset opening , and it makes your work effortlessly. Note : C-210 might not fit to some
pedals for sorts bicycle.
Jaw Sizes : 15mmO.A.L. : 350mm
Unlike other types, this unique design allows to extract rivets with one hand operation.
O.A.L. : 240mmWeight : 395Not suitable for HGIG type chain.
CHAIN RIVET PLIERS
Drop-forging with chrome vanadium steel for pros. Newly designed wrench which has a combination of 15jaw and straight jaw.
Jaw Sizes : 1515mmO.A.L. : 310mmWeight : 330g
Sizes : BC9/1620C-401, BC1/220C-401-BRight and left.O.A.L. : 120mmWeight : 170gCarefully check the right and reverse left hand tap before use.
Used for tightening or loosening rear sprockets. Two of these should be used when removing sprockets.
O.A.L. : 360mmWeight : 510g
Grasps the inner cable and pulls it tight, holding its tension while pinch-bolt is pulled up.
O.A.L. : 170mmWeight : 235g
INNER WIRE PLIERS
Special peg spanner for removing brake drum easily.
O.A.L. : 390mmMaximum opening width : 100mm Between two pegs' centersWeight : 560g
BRAKE DRUM TURNER
When a dirt such as brakes pad adhere to the side of a rim, performance of brakes down remarkably. This "K-141 POLISHING PAD" is a superior tool removing a dirt without damage most of the rims. Surely, you will get true performance of your brakes.
Suitable for cutting inner cable, outer cable and spoke of bicycle. Specially designed for cutting brake cable keeping the spiral untwisted.
O.A.L. : 200mmWeight : 335gUp to : Stranded steel cable 5.0mm,
Stainless spoke #14
Part No. Grain Size
REPLACEMENT PEG C-350 C-351
C-350C-351Caution For the newest C-349, C-351 is applicable.
Make sure the shape.
HOZANs unique screwing tool permits to make any length of spokes. Featuring a strengthened high-speed steel die. Applicable with stainless steel spokes.
Suitable spokes : #14/15Dimensions : 195W120H30DmmWeight : 830g
SPOKE THREAD CHASER
You can make thread of spokes very easily and quickly with this tool. Dont you have too many spokes of different lengths? If you have this tool, you need only to have a couple of representative spoke lengths. And you make spokes of necessary lengths whenever you need.
Suitable spokes : #142.0mm, #151.8mmSuitable spoke length : 75mm and over.Suitable material of spokes : Steel, Stainless Input voltage : AC100-240VReplacement head : C-706You cannot use C-705 with C-701Dimensions : 95W305W135DmmWeight : 2.2kgexcluding AC adapter
SPOKE THREADING MASTER
200mm335 5.0mm #14
Suitable for cutting inner cable, outer cable and spoke of bicycle.Specially designed for cutting brake cable keeping the spiral untwisted.
O.A.L. : 200mmWeight : 335gUp to : Stranded steel cable 5.0mm, Stainless spoke #14
Suitable spokes : #14/15For C-700/701/915
Suitable spokes : #14/15For C-700/701/915
This plug can be used to convert from type-A to type-C
Used for measuring tensile strength of spoke. Hook supporting pin and press down the handle till handle pin touches spoke. Then read dial indicator. Calibration chart is included.
Suitable spokes : #13/14/15 (Round spokes only)Dimensions : 170W120H30DmmWeight : 330g
SPOKE TENSION METER
With C-216, it is possible to cut spokes of narrow-rim-width sports wheels (spoke edge width of 8.6mm) in the assembled state. This tool can also be used with stainless-steel spokes.
Suitable spokes : #12#15O.A.L. : 210mmWeight : 280g
BC 5/16BC 3/8BC 7/16BC 1/2BC 9/16BC 5/8BC 11/16BC 3/4BC 31/32BC 1BC 1.29BC 1.37BC 1-7/16BC 1.45BC 1-9/16
mm JIS B 0225
BC 1.8BC 2BC 2.3BC 2.6BC 2.9BC 3.2BC 3.5BC 4
Warning Dont twist the C-216 when you cut a spoke.If you do, a blade of the C-216 will break.
K-25 BENCH VISE
mmmm kgJaw width Maximum opening WeightPart No.
Aids in truing the wheel fast and easily.
Applicable wheel : 14"28"Applicable rim width : 50mmDimensions : 330W535H260DmmWeight : 11kg
WHEEL TRUING STAND
For quick, easy way to check the offset of rear hubs on 5 and 10 speed bikes. Suitable for 18"28" size wheel. Set the center bolt (A) over hub locknut with touching rim and fasten lockbolt (B). Then re-set the gauge on oppsite side of rim to determine whethe the frame is properly aligned.