紙材料用水性コーティング剤 - unitika ltd....with coating layer without coating layer...
TRANSCRIPT
WATER-BASED COATING AGENTX-00212-02_2019.01.S01.1000P
樹脂事業部機能樹脂営業部 機能樹脂第一グループ (東京)TEL 03‐3246‐7610 (大阪)TEL 06‐6281‐5551
www.unitika.co.jp/plastics/
近年のトレンドワードとなりつつある「脱プラスチック」。使い捨てされるプラスチック材料の代替として注目をされているのが「紙」です。その紙材料に対して、ユニチカが長年培ってきたエマルション配合技術を駆使し、紙に好適に用いることができる水性コーティング剤をご提案します。ユニチカコーティング剤の特長である接着性、耐水性、耐薬品性などを活かし、紙の性能向上の一助を担って、紙材料の普及、拡大に貢献するコーティング剤を目指します。
紙材料用水性コーティング剤
コーティング層あり
コーティング層なし
紙基材のSEM像 (左:コーティングあり、下:コーティングなし) 撮影倍率:3000倍
ユニチカのコーティング剤配合技術によりフイルム基材だけでなく紙基材に対しても、被膜を形成することができます
コーティング層
紙基材紙基材
紙基材
コーティング層模式図
塗工性
20μm 20μm
耐水性
用途提案
紙容器表面改質剤紙パッケージ用接着剤
耐水性に優れたコーティング層であることで紙基材への水の浸透が抑えられています
接着性
紙を含めた多様な基材への高い接着性が確認できます
紙基材の上にイオン交換水を滴下して経過観察
水滴滴下10分経過後
拭取り後
コーティング層あり(被膜厚み約3μm) コーティング層なし
水滴跡跡なし
剥離強度[極大値](N/25mm)0 2 4 6
◀紙基材破壊
◀紙基材破壊
◀紙基材破壊
◀紙基材破壊
紙/Al
紙/PET
紙/OPP
紙/PE
試験条件接着層厚み:約10μm乾燥条件:100℃×30sラミネート条件:0.45MPa×1m/minラミネート温度:(PE)90℃ (Al、PET、OPP)120℃
WATER-BASED COATING AGENTX-00212-02_2019.01.S01.1000PTokyo TEL +81-3-3246-7610 Osaka TEL +81-6-6281-5551
Plastics Division www.unitika.co.jp/plastics/e/
With coating layer
Without coating layer
SEM images of paper substrate(Left: with coating layer, Down: without coating layer)Magni�cation: 3000 times
With Unitika's coating formulation technology,
the coatings can be formed not only on �lm substrates but also on paper substrates.
Coating layer
Paper substratePaper
substrate
Paper substrate
Coating layerSchematic
diagram
Coating suitability
20μm 20μm
Water resistance
Applications
Coating agent for paper containersAdhesive agent for paper packagings
The coating layer is excellent in water resistance,therefore, penetration of water
is suppressed on the paper.
Adhesion
The coating layer has excellent adhesion tovarious substrates including paper.
Observation of paper with waterdrop
10 minutesafter dropping
water
After wiping
With coating layer(Coating layer thickness: about 3μm)
Without coating layer
Waterdrop traceNo trace
In recent years, 'Plastic-free' is a trend word. Among them, 'Paper' is attracting attention as alternative materials to plastics for disposable. We propose the water based coating agents for the paper substrares that can be used well by making use of dispersion formulation technology that Unitika has cultivated over many years. Utilizing the unique properties such as adhesion, water and chemical resistance etc., Unitika coating agents improve the paper performance. We will contribute to spread and expansion of paper substrates by our coating agents.
WATER-BASED COATING AGENT FOR PAPER SUBSTRATES
Peel strength [maximal value] (N/25mm)0 2 4 6
◀Paper failure
◀Paper failure
◀Paper failure
◀Paper failure
Paper/Al
Paper/PET
Paper/OPP
Paper/PE
Test conditionsCoating layer thickness : about 10μmDrying condition : 100°C×30sLaminating condition : 0.45MPa×1m/minLaminating temperature : (PE) 90°C
(Al, PET, OPP) 120°C