cımbar1
TRANSCRIPT
-
8/13/2019 cmbar1
1/6
-
8/13/2019 cmbar1
2/6
TEMPLE CVLINDER SOLUTIONSFOR DORNIER LOOMS -SWING DEVICEDOR1 32 double plastic rings progressive 70-82- e.g. 01.363.321 tor Inlett = 24 mm
DOR2 0 = 24 mm 32 rings progressive 700- 82 -e. g. 01.363.321 tor shirting tabrics
DOR3 33 rings progressive 70-82- e.g. 01.363.392 tor tine woollen tabrics = 24 mm~
rotatable
DOR4 33 rings progressive 700- 82 -e. g. 01.363.392 tor upholstery tabrics = 24 mm~
rotatabfe4
DORS = 24 mm 26 rings broad, parallel 70- e.g. 01.363.387 tor heavy denim
DOR6 0 = 24 mm 36 rings helicoidale LH/RH -e.g. 01.363.394 tor medium woollen tabrics
-
8/13/2019 cmbar1
3/6
-
O Consulting Service: Free of charge recommendations including supply of test cylinders.Piease send us your cloth sampies
O Original equipper of Dornier weaving machines.O Quick delivery service. Top quality -ISO 9001O Supply of complete temple cylinders or spare parts.O Beyond all standard products, also specific solutions on demand.O Agents all around the world.O 125 years experience in development, manufacture and application of temples.
DOR 7 2 rings and rotatable head0 = 24 mm e.g. 01.363.355 tor chenille
DOR 8 5 rings and rotatable head0 = 24 mm e.g. 01.364.040 tor micro tibers
~
rotatable
DOR9 25 rings progressive 70-82- e.g. 01.363.322 tor medium cotton tabrics = 24 mm
DOR 10 2 rings and rubber roll LH/RH with spiral grooves -e.g. 01.369.115 tor voile = 24 mm
3 rings and rubber roll LH/RH with fine thread -e.g. 01.369.101 for deliGate fabriGs = 24 mm
~
rotatable
...
-
8/13/2019 cmbar1
4/6
~HUNZII(ER
~Competence in Temples
Colour codeColour defines pin length
Selvedge rings Normal ringsRED
0.50 mm("" rrass ringsfor all kinds of
standard fabricsBLUE
0.75 mmDOR 13DOR 12
() BROWN1.00 mmCJlastic ringswith fine needlestor deliGate tabriGs
BLACK1.25 mm
DOR 15DOR 14
Double plastic ringsfor fine, high
density fabrics
GREEN1.50 mm
DOR 17DOR 16YELLOW
1.75 mm
Rubber ringswith different hardness WHITE
other
lengthsDOR 19DOR 18Execution protected
Colour defines hardness
BLUEsoft
J Selvedge rings and normal rings resp. interchangeable freely.J Pin lengths easy to recognize thanks to colour code on temple rings.J Needle pins sharp (standard) or blunt.
GREENstandard
:) Colour defines hardness:) Temple rings in original Dornier execution.:) Other executions on demand.
TRANS-PARENT
hard
-
8/13/2019 cmbar1
5/6
TEMPLE CYLINDER SOLUTIONSFOR DORNIER LOOMS -COVER TYPE TEMPLESDOR 20 0= 23 mm 18 rings parallel 73 -e.g. 01.353.061 tor light tabrics
DOR 21 0 = 23 mm conterschon ring set 75 and brass roll LH / RH -e. g. 01.356.001 tor upholstery
DOR 22 0 = 23 mm 19 rings progressive 700- 79- e.g. 01.359.072 tor medium cotton tabrics
DOR 23 0 = 23 mm 2 rings and rubber roll LH/RH with spiral grooves -e.g. 01.359.054 for filament
DOR 24 0 = 24 mm 30 rings progressive 70- 84 -e. g. 01.363.133 tor medium to heavy cotton tabrics
DOR 26OR 25 2 rings parallel 730 = 23 mm e.g.01.353.063 Final head LH/RHtor DOR 23/ DOR 24
-
8/13/2019 cmbar1
6/6
~HUNZII(ER
~Competence in Temples
-.- -
~
-~
~iease request our specific documentation The parts marked in colour represent the
delivery volume of Hunziker.
unziker Full Width Temples allaw ta use rads af a diameter up ta 18 mm.af the rad depends an the kind af fabric.
Handed over by:.
@ Copyright by Hunziker / Technical changes reserved0>"'90.Q.~