8/12/2019 DTI 11004

1/3

Canon Internal DSC Technical information (DTI)

S&S Consumer Support Department Date: 24th Aug, 2011CEL Service Information Ref.No: DTI 11004

(SI: AJ-0842E)Model: SELPHY CP800Subject: Firmware Update on product exchange service

1. Overview

The firmware for CP800 is updated to new version from late of June. Accordingly, this memo conveys the details of plans for handling it.

2. Details of firmware

2-1. Details

CINC released new firmware for CP printer. This new firmware contains new function on layoutsettings and also contains improvement for ink/paper jam.(Please see attached SI: AJ-0842 for more details)

New firmware version: 3.113

Old firmware version: 3.97

Therefore, when the firmware version of exchanged product is old version, it has to update to newversion before exchange.

2-2. Affected Units (Old firmware version product)

The product that was produced before Jul has old version firmware.

And the number of sixth digit from the right of serial number of that product is 1 or 0 .(e.g. XXXX1 XXXXX) * Serial number is 10 digits.(e.g. XXXX0 XXXXX)

Note:This number was changed to 2 on new firmware product.

3. Market Support

When doing product exchange, please confirm the serial number of the product that will exchange.

If the serial number shows that it is old firmware products, please update firmwareby mentioned procedure on last page before exchange.

If the serial number shows that it is new firmware products, please exchange without firmwareupdate.

Note:We expect that most product stock is changed by new firmware products.However, small number of old firmware products may be included in the stock of each warehouse.

With kind regards,

CANON EUROPE LtdToru Tabuchi

8/12/2019 DTI 11004

2/3

Firmware Update procedure

- Windows XP or Windows 7 Computer with the CP800 printer driver installed- USB cable- CP800_Update_Tool (Published on SIMS)

Decompress CP800_Update_Tool.EXE file on PC.

* Also please confirm ReadMe file on Update_Tool file.

1) Checking the Firmware Version

(1) Connect the printer to a PC using a USB cable, andthen turn the printer on.To start the software, double-click CPFVCv31B.exein the FVCv31B folder in the SELPHY CP Service ToolCP800.

(2) Click Next on right screen

(3) The firmware version appears in the red frame. After checking the firmware version, click the Exit button.

2) Firmware Update (When the firmware is not the latest version)

(1) Double-click CPUD0200.exe in the EC290FUD folder inthe SELPHY CP Service Tool CP800.Then, click the Start button.

(2) The data will be transferred as below screen.

8/12/2019 DTI 11004

3/3

(3) When the following screen appears, click the OK button.

The software will be terminated.The data will be transferred as below screen.

After completing the firmware update, confirm the firmware version is changed to 3.113 withCPFVCv31B.

End