fasttrac april 2016

Ed. 1

6 Vo

l. 5

WE

KN

OW

MR

O

Scan for video

PRODUCT HIGHLIGHT

FASTENERS

LENOX RECIPROCATING BLADES

SELF-DRILLING SCREWS — INDENTED HEX WASHER

Part No. D L PointF118747 #6 3/8” #2F118471 #6 1/2” #2F14297 #6 3/4” #2F11774 #6 1” #2F119913 #8 1/2” #2F18925 #8 5/8” #2F19679 #8 3/4” #2F112741 #8 1” #2F112071 #8 1-1/4” #2F11994 #8 1-1/2” #2F14180 #8 1-5/8” #2F14525 #8 1-3/4” #2F114554 #8 2” #2F1455 #10 1/2” #2F15444 #10 5/8” #2F16355 #10 3/4” #3F13222 #10 1” #3F17506 #10 1-1/4” #3F19204 #10 1-1/2” #3F19698 #10 1-3/4” #3F118242 #10 2” #3F119295 #10 2-1/2” #3F115802 #10 3” #3F114674 #12 1/2” #3F113797 #12 3/4” #3F15364 #12 1” #3

Part No. D L PointF13728 #12 1-1/4” #3F11981 #12 1-1/2” #3F13026 #12 1-3/4” #3F12493 #12 2” #3F18466 #12 2-1/2” #3F113889 #12 3” #3F110112 #14 1/2” #3F118981 #14 3/4” #3F111921 #14 1” #3F116469 #14 1-1/4” #3F13298 #14 1-1/2” #3F111317 #14 1-3/4” #3F119019 #14 2” #3F118098 #14 2-1/2” #3F111797 #14 3” #3F116092 5/16” 1” #3F17664 5/16” 1-1/2” #3F13499 5/16” 2” #3F116173 3/8” 1” #3F111659 3/8” 1-1/2” #3F12723 12-24 7/8” #4F14908 12-24 1-1/4” #5F112445 12-24 1-1/2” #5F118171 12-24 2” #5F16782 1/4-28 3” #6

SELF-DRILLING SCREWS — UNSLOTTED INDENTED HEX W/BONDED WASHER

H

D A

L F

Part No. D Thread Pith Length PointF13636 #10 16 3/4” #3F12883 #10 16 1” #3F13610 #10 16 1-1/4” #3F14816 #10 16 1-1/2” #3F117630 #12 14 3/4” #3F115455 #12 24 7/8” #4F119831 #12 14 1” #3F15739 #12 24 1-1/4” #5F11580 #12 14 1-1/2” #3F14710 #12 14 2” #3F16528 #12 14 3” #3F14987 #14 14 3/4” #3F113750 #14 14 7/8” #1F117086 #14 14 1” #3F15291 #14 14 1-1/4” #3F115114 #14 14 1-1/2” #3F13033 #14 14 2-1/2” #3

SAE J78 1979

Material: Steel

Plating: Zinc

H

D A

L F

Diameter D #6 #8 #10 #12 #14 5/16” 3/8”Height H .093 .110 .120 .155 .190 .230 .295W.A.F. F 1/4 1/4 5/16 5/16 3/8 1/2 9/16Flange A .328 .414 .414 .432 .520 .676 .780

SAE J78 1979

Material: Steel

Plating: Zinc

Diameter D #10 #12 #14

Height H .120 .155 .190

W.A.F. F 5/16 5/16 3/8

Flange A .414 .432 .520

Part No. TPI L x W x T Lenox# ApplicationsF63317 18 6” X 3/4” X.035 618GR Medium gauge metals and thin metalsF63300 18 8” X 3/4” X .050 818GR Medium gauge metals and thin metalsF63307 14 9” X 1” X .042 9114GR Thick gauge metals and medium gauge metals

* See more of this featured product on page 7.

®

WE KNOW MRO

FASTENERS

NEW PRODUCT

NEW BODY CLIPS

Part No. Description Bulb No. ColorF25091 24 bulb T-2/3 wedge 14V 3.36W 24 ClearF25094 57 bulb mini bayonet BA9s 14V 3.36W 57 ClearF25095 74 bulb T-1 3/4 wedge 14V 1.4W 74 ClearF25096 90 bulb BA15d 13V 7.54W 90 ClearF25104 97 bulb SC BA15s 13.5V 9.3W 97 ClearF25090 198 bulb DC index bayonet 15d 12/14V 198 ClearF25093 561 bulb T-3 loop 12.8V12.416W 561 ClearF25097 906 bulb T-5 wedge 13.5V 9.315W 906 ClearF25099 912 bulb T-5 wedge 12.8V 12.8W 912 ClearF25100 916 bulb T-5 wedge 13.5V 7.29W 916 ClearF25102 921 bulb T-5 wedge 12.8V 921 ClearF25103 922 bulb T-5 wedge 12.8V 922 ClearF25079 1003 bulb bayonet BA15s 12.8V 1003 ClearF25080 1004 bulb bayonet BA15d 12.8V 1004 ClearF25084 1445 bulb G3 1/2 M bayonet 14V 1445 ClearF25085 1816 bulb T-3 1/4 M bayonet 13V 1816 ClearF25086 1889 bulb T-3 1/4 M bayonet 14V 1889 ClearF25087 1891 bulb T-3 1/4 M bayonet 14V 1891 ClearF25088 1893 bulb T-3 1/4 mini bayonet BA9s 14V 1893 ClearF25089 1895 bulb G4 1/2 mini BA9s 14V 1895 ClearF25081 1156NA SC bayonet 15s 12.8V nat amber 1156NA AmberF25082 1157NA S8 DC bayonet 15d 12.8/14V 1157NA ClearF25083 1295NA bulb S8 SC bayonet 12.5V nat amber 1295Na AmberF25092 24 NA bulb T-2 3/4 wedge 14V nat amber 24NA AmberF25098 906NA bulb T5 wedge 13V amber 906NA AmberF25101 916NA bulb T5 wedge 13.5V nat amber 916NA Amber

Note: These bulbs are stocked in Plano warehouse only

ECONOMY IMPORTED AUTO BULBS

SCREWS — INDENTED HEX SELF-DRILLING (TEK) 410 STAINLESS STEEL H

D A

L F

Part No. D LF116147 #6 3/8”F119925 #6 1/2”F1487 #6 5/8”F117069 #6 3/4”F111086 #6 1”F16655 #6 1-1/4”F16054 #8 1/2”

Diameter D #6 #8 #10 #12 #14Height H .093 .110 .120 .155 .190

W.A.F. F 1/4 1/4 5/16 5/16 3/8

Flange A .320 .348 .414 .432 .520

ANSI B18.6.4

Material: 410 Stainless Steel

Plating: None

Part No. D LF110530 #8 5/8”F117850 #8 3/4”F119196 #8 1”F112589 #8 1-1/4”F119835 #8 1-1/2”F17969 #8 2”F115021 #10 1/2”

Part No. D LF11995 #10 5/8”F113355 #10 3/4”F117103 #10 1”F13574 #10 1-1/4”F12616 #10 1-1/2”F14303 #10 2”F117510 #10 2-1/2”

Part No. D LF19031 #12 3/4”F118398 #12 1”F115805 #12 1-1/4”F114607 #12 1-1/2”F19660 #12 2”F115816 #12 2-1/2”F1756 #12 3”

Part No. D LF117694 #14 3/4”F19958 #14 1”F17083 #14 1-1/4”F118595 #14 1-1/2”F16832 #14 2”F18216 #14 2-1/2”F11756 #14 3”

F25082 F25083F25081

F25098F25092 F25101

F25088F25086 F25089F25087

F25094 F25095 F25096 F25104 F25090 F25093 F25097F25091

F25100 F25102 F25103 F25079 F25080 F25084 F25085F25099

FASTENERS

ELECTRICAL

®

WE KNOW MRO

ELECTRICAL

EXPANDABLE SLEEVING NEW PRODUCT

NEW BODY CLIPS

NEW PRODUCT

NEW BODY CLIPS

NEW PRODUCT

NEW BODY CLIPS

Part No. DescriptionF25076 Replacement for the F2397

Top Post Black/Red Terminal Protectors 2 per package

F25077 Replacement for the F23036 Side Post Black Terminal Protectors 50 per package

TERMINAL PROTECTORS 3 VOLT LITHIUM BATTERIES

Part No. PackageF25105 6 Pack

NEVADA & WISCONSIN

SPORT KOTEWATER-BASED URETHANE WOOD FLOOR FINISH

Part No. PackageF33008 1 Gallon

• Single-component formula means no pot life and no mess. Finish is useable the next day if more coats are desired

• Contains reactive polymers that offer durability and appearance equal or greater than oil-modified products

• Excellent black mark, scuff and soil resistance• One hour dry time between coats under normal conditions• Only 24 hour gym down time• Uniquely restorable with high speed buffer• Suitable for oak, maple and parquet floors• VOC compliant in all states• MFMA approved - meets all standards set for group five

products, water-based finish

NEVADA & WISCONSIN

24” HEAVYWEIGHT T-BAR WITH POLEWOOD FLOOR FINISH APPLICATOR

Part No. PackageF42435 EachF42436 6 Pack Replacement Pads

• 24” heavyweight T-bar applicator• Use in conjunction with watering can to quickly and

evenly apply wood floor finishes• T-Bar replacement pads 6 Pack – F42436

FLOOR SWEEPING COMPOUNDS

Part No. Description Color PackageF32512 Premium Oil Base Red 50 Pound BoxF3823 Premium Wax Base Green 50 Pound BoxF31064 Clean Sweep Oil Base Red 50 Pound Box

LOUISIANA

• Premium Oil Based — effectively controls dust on both concrete and wood floors. For use on floors not damaged by oil

• Premium Wax Based — Made with hardwood sawdust, used for dust control while sweeping

• Clean Sweep Oil Based — Controls dust on concrete floors (contains sand/grit )

Part Number

Nominal Size

Expansion RangeMin. Max. Color

F25106 1/8” 1/8” 1/4” BlackF25107 1/4” 5/32” 7/16” BlackF25108 3/8” 3/16” 5/8” BlackF25109 1/2” 1/4” 3/4” BlackF25110 3/4” 5/8” 1” BlackF25111 1” 3/4” 1 3/16” Black

SCISSOR CUT FOR EASY, FRAY RESISTANT INSTALLATION

• Sleeving with the unique advantage of being able to cut the material with ordinary scissors and still maintain an extraordinarily fray-resistant end without the addition of chemical binders or adhesives

• Ideal for field installers and other situations where access to a hot knife is impossible. Fray resistant properties allows frequent expansion of the cut end without unraveling. When cut with a hot knife, produces a clean, smooth and virtually frayless end

• Braided for maximum coverage while still allowing enough expansion for easy installation over plugs and connectors

• Supplied in 100 foot rolls

• The popular CR123A 3 volt lithium battery is now available in 6 packs

CHEMICALS

®

WE KNOW MRO

CHEMICALS

Part No.NetWeight

CanSize

F31988 16 oz 20 fl oz

CORROSION XPart No. DescriptionF34330 GallonF34331 Case - Gallon x 4F34332 QuartF34333 Case - Quart x 12F34070 5 Gallon Pail

ISI POLY ORANGE 40

Part No. DescriptionF31419 1 Gal F3560 7 ml Pocket Oiler

SUPER LUBE OIL WITH PTFE

NEW PRODUCT

NEW BODY CLIPS

NEW PRODUCT

NEW BODY CLIPS

Part No. DescriptionF34338 Dynatex Gasket RemoverF34340 Case of 12

GASKET REMOVER

NEUTRAL PH FLOOR CLEANER

• Remarkable, no rinse, floor cleaner leaves floors sparkling clean

• Amazing cleaning action safely lifts soils from floors, walls, woodwork and virtually any surface not harmed by water

• Will not damage, soften or dull floor finishes• Highly concentrated, non-corrosive, non-hazardous,

and non-flammable• Pleasant lemon-lime fragrance leaves cleaned areas with

fresh clean scent• Low foam formulation works well in any water temperature and condition• Dries quickly, saves time and labor

Part No. PackageF33594 1 GallonF33595 4 x 1 GallonsF33523 5 Gallon Pail

NANO HIGH-SOLID FLOOR FINISH

Part No. PackageF33004 1 GallonF33520 4 x 1 GallonsF33521 5 Gallons

• Nano-zinc cross-linking provides superior: Lay-down gloss, gloss build, durability, mark resistance, soil resistance, dry and recoat times

• Ammonia-free for dramatically-reduced odor• Ideal for limited maintenance programs, yet responds to

daily burnishing, if desired• Low-emissions formula - meets California’s new

1% VOC regulation• Fast-drying - 15 to 20 minutes under normal conditions• Slip-resistant - UL Classified

Part No. PackageF33007 1 GallonF33506 4 x 1 Gallons

• Contractor-grade formulation strips hard to remove finishes and seals

• Eliminates or greatly reduces machine scrubbing• Powerful enough to remove multiple layers, build-up or

highly burnished finish• Low foam for easy application with automatic-scrubbers• Designed to strip equally well in cold or warm water

HEAVY DUTY STRIPPER LOW MAINTENANCE FINISH

Part No. PackageF33005 1 GallonF33006 4 x 1 GallonsF33516 5 Gallons

• Extremely durable and mark-resistant finish for low maintenance applications

• High gloss acrylic polymers stay clean, clear, and shiny to reduce maintenance

• Non-yellowing, low maintenance formula offers superb black mark and scuff resistance

• Ideal for reduced burnishing programs (once per week)• Use on vinyl tile, rubber, linoleum, terrazzo and quarry tile floors• Excellent seal properties

CorrosionX is the most advanced and effective corrosion prevention compound, lubricant and penetrant in the world! CorrosionX utilizes a revolutionary technology called Polar Bonding that actually kills existing rust and corrosion and provides long-term protection against rust and corrosion on any metal or electronic surface.

• Cleans grease and heavy oil deposits from most surfaces• Drain cleaner and grease trap maintainer• Deodorizer• Concentrated• Non-butyl, non-corrosive, non-flammable, no petroleum distillates• Contains d-Limonene• Will dull some floor seals, finishes and some types of protective coatings.

Test on an inconspicuous area first.• For: Grease traps, drains, trucks and heavy equipment, engine parts, tar

and asphalt removal• Dosing: Degreasing: 1:10 (rinse thoroughly), Industrial equipment: 1:20• Fragrance: Citrus

• A premium synthetic oil with suspended PTFE particles

• Use as a general purpose lubricant for industrial machinery and equipment

• Viscosity stable, long lasting• Contains no silicone• USDA approved: H1 (Food Grade)• Safe on metal, rubber, plastic, leather,

fabric, and painted surfaces • Applications: enclosed industrial

gears, chains, gear head motors, conveyors, machine tools, roller bearings, etc.

• Penetrates and cleans intricate shapes • Removes gasket reside in 10-12 minutes• Quickly removes baked-on gaskets, silicone weatherstrip

adhesives, grease and paint• Eliminates excessive scraping and potential damage to

flanged surfaces • Saves time and labor • Tested in accordance to 75/324/EEC Directive 6.1

®

WE KNOW MRO

CHEMICALS

• Disinfectant, cleaner, mildewstat, fungicide, virucide and deodorant• Applications: hospitals, nursing homes, schools, veterinary areas,

restrooms, carpet and upholstery, commercial, institutional and industrial use

• Meets OSHA bloodborne pathogen standard for HIV, HBV and HCV• Effective against Parvovirus (CPV), Porcine Parvovirus and Rabies• Will not dull floor finishes• EPA registered hospital grade quaternary detergent• General dilution: 2 oz• Fragrance: Lemon

ZEST ND DISINFECTANTNEUTRAL DISINFECTANT MULTI-PURPOSE CLEANERAvailable in the following states: CA, NV, NM, OK, TX, ND, MN, IL, MI, IN, OH, PA

Part No. PackageF33192 1 GallonF33171 4 x 1 Gallons

SHOP SUPPLIES

THREAD SEALANT TAPE

• Medium density thread sealant tape with PTFE• Lubricates, protects and seals threads• Thread sealant tape makes it easier to assemble or

disassemble threaded fittings, without the risk of system contamination

• Tape thickness: 4mil • Standard Density: 0.28 gm/cm3 – 100% virgin PTFE • Temperature range: 375° F to 500° F

USA Part No.

Import Part No. Size

F43627 F484 1/2" x 260"F43628 F41748 1/2" x 520"F43629 F4643 3/4" x 520"F43630 F4253 1" x 260"

NEW PRODUCT

NEW BODY CLIPS

Part No. DescriptionF24957 7 LED side turn / side marker light in amber

Part No.F4100

Part No.F41576

Part No. Size ColorF43589 3/4” x 60' BlackF43590 3/4” x 60' RedF43591 3/4” x 60' BlueF43592 3/4” x 60' YellowF43593 3/4” x 60' WhiteF43594 3/4” x 60' GreenF43595 3/4” x 60' OrangeF43596 3/4” x 60' BrownF43597 3/4” x 60' Purple

• 7 mil thickness• Cold and heat resistant. Resists UV rays, acids, alkalis, abrasion, moisture and corrosion• Maximum 600 volts• Maximum temperature: 176º F (80º C)• Meets ASTM D-3005 and HHI-585 specifications

PROFESSIONAL GRADE VINYL ELECTRICAL TAPE

• Dum Dum tape 1/8” thick• Black foam rubber• Insulates, prevents

condensation, deadens sound

AIR CONDITIONING SEALANT TAPE

Part No. SizeF41281 2” x 30”

• Vise-Grip® brand• Used for turning, cutting, tightening, clamping,

and twisting• Hardened tooth design grips from any angle• Convenient wire cutter cuts up to a 1/4” bolt• Made from high grade alloy steel heat treated

for maximum toughness and durability

Part No. DescriptionJaw Capacity

F42389 8" Sheet Metal Tool 3-1/8"F42390 9" Welding Clamp 2-3/4"

• Makes bending, forming and crimping sheet metal easier

• U-shaped jaw provides enhanced visibility and more working space

TOOLS — PLIERS

Includes one each of the following:• Magnetic hex bit holder• Torx bits T10, T15, T20, T25, T30, T40• 1/4” shank

TORX BIT SET WITH HOLDER SET SWIVEL HEAD MAGNET

• 10-lb pick-up swivel head magnet with telescopic shaft

• Drop in replacement for Freightliner• OE# A06-58770-000• Delphi OEM connector on the back to easily connect to the vehicle harness• DOT/SAE J2039, J592e, J2042• 3-pin Delphi GT150 connector• 5 year warranty

FREIGHTLINER REPLACEMENT MARKER LIGHT

®

WE KNOW MRO

AUTOMOTIVE

ABRASIVES

• Perfect for maintenance, security and industrial professionals

• 48” retractable Kevlar cord• Split key ring attachment• Belt clip• Holds 15 keys• 2” diameter• Made in USA

Part No. 144/BoxF91028 F91030

48” RETRACTABLE KEY RING

CUTTING TOOLS

Part No.F4894

• Compact and lightweight• Lever throttle for feathering control• Rear exhaust

Specifications:• Collet Size: 1/4”• Free speed: 22,000 rpm

1/4” STRAIGHT DIE GRINDER • Overall length: 5-3/4”• Net weight: 1-1/4” lbs• Motor: 1/3” hp• Air inlet thread: 1/4” NPT• Air hose ID size: 3/8”• Avg. air consumption: 4 cfm• Air pressure: 90-120 psi

*Note: 11/64” and smaller do not have Flats on the shank.

MECHANICS LENGTH DRILLS

Part No. DiameterOverall Length

F61680* 1/16” 1-7/8”F61702* 5/64” 2”F61698* 3/32” 2-1/4”F61705* 7/64” 2-3/8”F61689* 1/8” 2-1/2”F61707* 9/64” 2-5/8”F61701* 5/32” 2-3/4”F61681* 11/64” 2-7/8”F61696 3/16” 3”F61684 13/64” 3-1/8”F61704 7/32” 3-1/4”F61687 15/64” 3-3/8”F61685 1/4” 3-1/2”F61688 17/64” 3-5/8”F61706 9/32” 3-3/4”

Part No. DiameterOverall Length

F61690 19/64” 3-7/8”F61700 5/16” 4”F61691 21/64” 4-1/16”F61679 11/32” 4-1/8”F61692 23/64” 4-3/16”F61699 3/8” 4-1/4”F61693 25/64” 4-5/16”F61683 13/32” 4-3/8”F61694 27/64” 4-7/16”F61703 7/16” 4-1/2”F61695 29/64” 4-5/8”F61686 15/32” 4-3/4”F61697 31/64” 4-7/8”F61682 1/2” 5”

• CC-GRIND-SOLID for rough grinding applications • 40% more productivity due to ultimate stock removal rates compared with reinforced grinding wheels• 50% less noise and vibration during use• As tough and safe as a reinforced grinding wheel and 100% increased aggressiveness• Maximum RPM for 4-1/2” is 13,300• Maximum RPM for 7” is 8,500

CC-GRIND-SOLID GRINDING DISC

Part No. Dia x ArborF51105 4-1/2” x 7/8”F51107 4-1/2” x 5/8”-11F51108 7” x 7/8”F51109 7” x 5/8”-11

STEEL

Part No. Dia x ArborF51110 4-1/2” x 7/8”F51111 4-1/2” x 5/8”-11F51112 7” x 7/8”F51113 7 ”x 5/8”-11

STAINLESS STEEL

QUIKLEEN® ABSORBENT

Part No. SizeF42324 Gallon JugF42402 Gallon Jug x 4F42325 20 lb Bag

• Quikleen® is an inert, inorganic, non-biodegradable blend of minerals. It works by means of known as “silica encapsulation”. The absorbed liquid actually becomes part of the silica molecule.

• All natural, non-toxic, non-flammable, non-biodegradable, non-leaching, reusable

• Landfill acceptable and EPA certified• 1.5 lbs of Quikleen® will absorb an entire quart of motor oil vs

15 lbs of clay• Absorbs oils, fuels, grease, solvents, acids (except hydrofluoric), paint,

coolants, bodily fluids, sewage

®

WE KNOW MRO

AUTOMOTIVE

SECURITY

DRILLS — SILVER & DEMING

Part No. SizeF61781 33/64”F61774 17/32”F61783 35/64”F61800 9/16”F61784 37/64”F61775 19/32”F61785 39/64”F61795 5/8”F61786 41/64”F61776 21/32”F61787 43/64”F61771 11/16”F61788 45/64”F61777 23/32”F61789 47/64”

Part No. SizeF61782 3/4”F61790 49/64”F32738 25/32”F61791 51/64”F61772 13/16”F61792 53/64”F61778 27/32”F61793 55/64”F61799 7/8”F61794 57/64”F61779 29/32”F61796 59/64”F61773 15/16”F61797 61/64”F61780 31/32”

Part No. SizeF61798 63/64”F61801 1”F62647 1-1/32”F62645 1-1/16”F62651 1-3/32”F62649 1-1/8”F62654 1-5/32”F62650 1-3/16”F62656 1-7/32”F62648 1-1/4”F62653 1-5/16”F62652 1-3/8”F62655 1-7/16”F62646 1-1/2” • 1/2” shanks

• 3 Flats on the shanks - to virtually eliminate chuck slippage• Hi-molybdenum tool steel for the tough drilling jobs like stainless steel• Nitro-carburized surface treatment helps keep these drills sharp under

high heat conditions• Genuine ShopPro quality• 118° split point• Made in USA

Part No. DescriptionF62643 8 - piece set includes 9/16”, thru 1” by 16thF62644 8 - piece set replacement index

Part No. TPI L x W x T Lenox# ApplicationsF63299 6 6” X 3/4” X .050 656GR Rough work in woodF63310 6 9” X 3/4” X .050 956GR Rough work in woodF63311 6 12” X 3/4” X .050 156GR Rough work in woodF63312 10 6” X 3/4” X .035 610GR Wood, plastic and heavy gauge metalF63313 10 8” X 3/4” X .050 810GR Wood, plastic and heavy gauge metalF63314 14 4” X 3/4” X .035 414GR Heavy gauge metal and medium gauge metalF63315 14 6” X 3/4” X .035 614GR Heavy gauge metal and medium gauge metalF63316 18 4” X 3/4” X .035 418GR Medium gauge metals and thin metalsF63317 18 6” X 3/4” X.035 618GR Medium gauge metals and thin metalsF63300 18 8” X 3/4” X .050 818GR Medium gauge metals and thin metalsF63301 24 4” X 3/4” X .035 424GR Thin metals F63302 24 6” X 3/4” X .035 624GR Thin metals F63303 6 6” X 1” X .062 6066GR Demolition work in wood and metalF63304 6 9” X 1” X .062 966GR Demolition work in wood and metalF63305 10 9” X 1” X .062 960GR Fire and rescue and demolition work F63306 14 6” X 1” X .042 6114GR Thick gauge metals and medium gauge metalsF63307 14 9” X 1” X .042 9114GR Thick gauge metals and medium gauge metalsF63308 14 12” X 1” X .042 2114GR Thick gauge metals and medium gauge metalsF63309 18 6” X 1” X .042 118GR Medium gauge metals

• T2 technology and precision applied titanium coating help dissipate heat making blades last longer

• Titanium coating makes teeth more wear resistant so they stay sharp for quicker cuts

• T2 technology’s patented tooth design delivers longer blade life and enables faster cutting in the widest array of cutting applications

LENOX GOLD BLADES

• Constructed of fiber-reinforced rubber• Reduces the risk of truck and

trailer movement• Extra large eye bolt for added security

and ease of handling• Size: 7-3/4” x 9-1/2” x 5-5/8”

RUBBER WHEEL CHOCKS

Part No.F84387

CLAMPS — EAR TYPE2 - EAR CLAMPS

• Widely used for maintenance and OEM applications

• Installed on air, fluid, gas and steam lines• One piece design offers a positive, taper-

proof seal without damage to the hose• Zinc plated• Use tool F85012 or F82860 to install

Part No. SizeBandWidth

Min.Dia.

Max.Dia.

F82596 M5 (3/16”) 5mm 3mm 5mmF82029 M7 (1/4”) 6mm 5mm 7mmF82139 M9 (5/16”) 7mm 7mm 9mmF83769 M11 (3/8”) 7mm 8mm 11mmF84358 M13 (1/2”) 7mm 11mm 13mmF85129 M15 (9/16”) 7.5mm 13mm 15mmF84137 M18 (5/8”) 8mm 15mm 18mmF8131 M20 (3/4”) 8.5mm 17mm 20mmF81135 M22 (13/16”) 9mm 19mm 22mmF82867 M23 (7/8”) 9mm 20mm 23mmF82178 M27 (1”) 10mm 23mm 27mmF83866 M31 (1-1/8”) 10mm 27mm 31mmF81158 M33 (1-5/16”) 10mm 29mm 33mmF81233 M37 (1-7/16”) 10mm 33mm 37mmF83862 M40 (1-1/2”) 10mm 36mm 40mm

Ed. 16 Vol. 5

SUPPLY®

WE

KN

OW

MR

O

2200DS (DISSIMILAR STEELS)

• Excellent for stud pulling and broken stud and bolt removal• Special all-position high tensile strength electrode for all steels and dissimilar metals• Unique “Quick Freeze” coating simplifies vertical down and up welding• Ideal for poor fit up joints in all positions• Controlled weld puddle allows for filling holes and joining dissimilar steels• Welds even dirty and greasy metal. Saves prep time• Use to solve the problem of welding “mystery metals”• Creates very little smoke compared to other electrodes• Runs with very low spatter, so it’s safer to operate• Ideal for repairing tools, dies, spring steel and any dissimilar metal combinations,

except for aluminum and copper alloys

• Welding Positions: flat, horizontal, vertical up and down, and overhead• Recommended Current: DC reverse (+) or AC• Recommended Amperage Settings (min/max): 5/64” (35/55); 3/32” (35/70); 1/8”

(60/110); 5/32” (75/140)• Tensile Strength as Welded: 128,000 psi• Tensile Strength Work Hardened: 186,000 psi• Yield Strength: 90,000 psi• Hardness: Rockwell B97; Brinell 320• Elongation: 32%

Part No.50# Bulk PackPart No. Diameter Length

Flux Color

Package Size

F41840 3/32” 12” Lt. Gray 5 lbsF41839 F42016 1/8” 12” Lt. Gray 5 lbsF41841 5/32” 12” Lt. Gray 5 lbs

220MS (MILD STEEL)

• Universal all-position electrode ideally suited for repair and fabrication of all types of mild steel and sheet metal

• Excellent for poor fit situations and joining sheet metal to thick stock• No sticking and easy restrike • Easily repairs galvanized steel even if dirty and greasy. Saves prep time• Replaces any 60 series (6010, 6011, 6013, etc.) electrode but has a higher tensile

strength and elongation %• Electrode can be bent without flux breakage• Contact (drag) type transfer allows electrode to weld by itself

• Welding Positions: flat, horizontal, flat up and down, and overhead• Recommended Current: DC Straight (-), Reverse (+) or AC• Recommended Amperage Settings (min/max): 1/16” (20/40); 3/32” (50/70); 1/8”

(70/110); 5/32” (115/140); 3/16” (150/200)• Tensile Strength: 83,000 psi• Yield Strength: 75,000 psi• Elongation: 25%


Flux Color

Package Size

F41835 1/16” 12” Tan 5 lbsF42010 3/32” 14” Gold 10 lbsF41836 F42008 1/8” 14” Gold 10 lbsF41838 F42011 5/32” 14” Gold 10 lbsF41837 F42009 3/16” 14” Gold 10 lbs

1116LH (LOW HYDROGEN)

• Low Hydrogen, high strength DC electrode for joining low and medium carbon steels, low alloy steels and construction steels

• Low spatter yield, self-releasing slag and uniform ripple deposits• 1116LH has an extra low moisture content to reduce hydrogen induced cracking in

the weld• Welds even dirty and greasy steel. Saves prep time• Replaces any 70 series electrodes (7014, 7018, 7024, etc.) but has a higher tensile

strength and elongation %• Operates in all positions• Flux Color: Gray• Welding Positions: flat, vertical up and down, horizontal, and overhead

• Recommended Current: DC Reverse (+) • Recommended Amperage Settings (min/max): 1/8” (100/140); 5/32” (140/190) • Tensile Strength: 120,000 psi• Yield Strength: 96,000 psi• Elongation: 23%• Welding Techniques: For the majority of materials to be welded with these

elctrodes, minimum preheats between 212°F 176;F (100°F 176°C) and 392°F 176°F (200°F 176°C) is required to avoid hydrogen induced “cold” cracking. Remove all surface contaminants. Maintain a short arc gap and use a stringer or slight weave technique. Chip slag thoroughly between passes


Flux Color

Package Size

F41992 F41993 3/32” 14” Gray 10 lbsF41826 F41990 1/8” 14” Gray 10 lbsF41828 F41994 5/32” 14” Gray 10 lbsF41827 F41991 3/16” 14” Gray 10 lbs

WELDING ELECTRODES

fasttrac april 2016

Documents