lubrication contanier 20 ft

17
YO İN face TW like Lubrication Contanier 20 Ft. ALURA TRAILER P +90 332 3460080 F + 90 332 3460090 M +90 544 2420491 Yazır Mah. Sultan Cad. 34/407 Selçuklu / Konya / TURKEY www.aluratrailer.com [email protected] Project No Revision No Date Page 17.097 002 24.04.2017 / 1 9 Lubrication Contanier 20 ft.

Upload: others

Post on 14-Mar-2022

2 views

Category:

Documents


0 download

TRANSCRIPT

TTDTJ22PE5A20170424EN

Standby Power (ESP)kVA 22kW 18

Prime Power (PRP)kVA 20kW 16

Canopied 700 x 1750 x 1200 632 75 70Open Skid 710 x 1380 x 1050 467 75 TBA

The maximum power which agenerating set is capable ofdelivering continuously whilstsupplying a constant electrical load.Average load can be 100%. Thegenerator must not be overloaded.

The max power available during avariable electrical power sequence,under the stated operatingconditions, for which a generatingset is capable of delivering in theevent of a utility power outage orunder test conditions for up to 200hrs of operation per year underaverage of 70% load. Overloadingisn’t permissible.

The maximum power which agenerating set is capable ofdelivering continuously whilstsupplying a variable electrical load.Average load should be 70%. Thegenerator can be overloaded 10%for 1 hour per 12 hrs.

TJ22PE5A

50 Hz Diesel Generator Sets

Output Power

Size W x L x H(mm)

Weight(kg)

Fuel Tank(lt)

Noise dB(A) @ 1m

Continuous Power Standby Power Prime Power

TTDTJ22PE5A20170424EN

Manufacturer PERKINSModel 404A-22GCylinder Configuration INLINENo of Cylinders 4Displacement lt 2.216Stroke mm 100Bore mm 84Compression Ratio 23,3:1Aspiration NATURAL INTAKEGovernor Type MECHANICCooling System WATERCoolant Capacity lt 7Lubrication Oil Capacity lt 4,9Electrical System VDC 12Speed / Frequency 50 Hz rpm 1500 rpm / 50 HzEngine Gross Power (Standby 50Hz)

kW 20,6

Fuel Consumption 110 % 50 Hz lt/h 6,2Fuel Consumption 100 % 50 Hz lt/h 5,4Fuel Consumption 75 % 50 Hz lt/h 4Fuel Consumption 50 % 50 Hz lt/h 2,9Exhaust Outlet Temperature 50 Hz °C 505Exhaust Gas Flow 50 Hz m3/min 3,94Combustion Air Flow 50 Hz m3/min 1,45Cooling Air Flow 50 Hz m3/min 29,4

Manufacturer MARELLIModel MJB160SB4No of Phases 3Power Factor 0,8No of Bearings SINGLENo of Poles 4No of Leads 12

Voltage Regulation (Steady State)± %0,5 [In Steady State, Speed from

(-%2) to (+%5) and CosØ=0,8-1]Insulation Class HDegree of Protection IP 23

Excitation SystemAVR (Automatic Voltage Regulator),

BrushlessConnection Type STARTotal Harmonic Content (No Load) < %2Frequency Hz 50Voltage Output 50 Hz VAC 230 / 400Rated Power (Standby) 400_50 Hz kVA 22Efficiency (4/4_400 V_50 Hz) % 87,4

TJ22PE5A

50 Hz Diesel Generator Sets

Engine

Alternator

EngineIn Teksan generator sets, leading engine brands that havestate of the art technology and have compliance with ISO8528, ISO 3046, BS 5514, DIN 6271 standarts, are beingused. These engines with low fuel consumption, provideaccurate speed setting and order, mount to the fuel pump,also have mechanic or electronic type governors.

AlternatorIn products Teksan produced, leading alternator brands ofthe world that have state of the art technology, high quality,productivity and durability, are being used. All alternators,which pass necessary test process and found appropriateaccording to EC 60034-1; CEI EN 60034-1; BS 4999-5000;VDE 0530, NF 51- 100,111; OVE M-10, NEMA MG 1.22.standarts, have bearing system that does not needmaintenance, with electronic type voltage regulatorproviding voltage setting.

Control PanelStandard control panel, that is used in Teksan generatorsets, ensures comfortable and safe usage. All measuredand statistical parameters, operating modes, notice andalarms and condition of generator, are monitored easilyfrom the control panel. On the front of the panel’s metalbody has electronic control module and the emergencystop button and the panel’s metal body is made of steelsheet and is painted with electrostatic powder paint.

Teksan offers panel design and solutions that complywith special requirements of customers as well asquality standard panels.

Chassis and Fuel TankChassis is manufactured from steel that has featuresand durability for carrying burden of generator set.Thanks to its rigid structural design and anti-vibrationmounts, it reduces vibration level to minimum. Allchassis contain lifting lugs. Apart from chassises thatare produce by Teksan, special solutions that designin accordance with customer desires, maketransportation and positioning easier.

In less than 1600 kVA power generator sets, fuel tank is

produced integratedly to the chassis. In more than 1600 kVA

power generator sets, rectangular type fuel tank is provided

with generator set seperately. In all types of fuel tank have its

level and indicator.

Cooling SystemSystem, that consists of quality industrial - type radiator,expansion tank and cooler fan, keeps the temprature ofgenerator set’s equipments constant at a proper level.

TEKSAN Standard Canopies' default features are as follows;

■ Compatible with 2000/14/EC directives, certified noise

emission level,

■ 2 or 4 points transport possibility according to cabin size,

■ Hidden exhaust inside the canopy,

■ Emergency stop button located on the canopy,

■ Improved air suction channel to ensure homogenous

cooling in the canopy,

■ Radiator air outlet and exhaust with designed towards

above,

■ Lid on cab that provides to be filled up water and antifreeze

easily to the radiator,

■ Amplified paint system against corrosion and rust,

■ Improved performance in terms of sound insulation,

■ Demounted parts that make transportation and

maintenance easier,

As well as the standard range of canopies, TEKSAN can also

design tailormade canopies with specific sound level or

size upon customer requests.

Some Optional Equipments that Teksan provides with

Generator Sets;

■ Medium voltage alternator,

■ Remote radiator applications,

■ Automatic fuel filling system,

■ Fuel tank, oil pan, dashboard, alternator, coil heaters,

■ Alternator with double AVR and PMG,

■ Synchronization systems,

■ The generator output breaker,

■ Grid-generator transfer switches,

■ Accordance with the specific volume of demand-insulated

cabins,

■ Seismic solutions,

■ Trailer,

■ Remote monitoring.

TJ22PE5A

50 Hz Diesel Generator Sets

Standard Equipments

Canopy Features

Optional Equipments

TTDTJ22PE5A20170424EN

■ The TJ-509T is a next generation genset control unit combiningmulti-functionality and wide communication possibilitiestogether with a reliable and low cost design.

■ The unit complies and mostly exceeds world’s tightest safety,EMC, vibration and environmental standards for the industrialcategory.

■ Software features are complete with easy firmware upgradeprocess through USB port. The Windows based PC softwareallows monitoring and programming through USB, RS-485,Ethernet and GPRS.

■ The PC and server based Rainbow Scada software allowsmonitoring and control of an unlimited number of gensets froma single central location.

■ AMF unit with uninterrupted transfer■ ATS unit with uninterrupted transfer■ Remote start controller■ Manual start controller■ Engine controller■ Remote display & control unit■ Waveform display of V & I■ Harmonic analysis of V & I■ CTs at genset or load side

■ SM-GPRS■ Web monitoring■ Web programming■ GSM-SMS■ e-mail■ USB Device■ RS-232■ J1939-CANBUS

■ 2 phase 3 wires, L1-L2■ 2 phase 3 wires, L1-L3■ 3 phase 3 wires, 3 CTs■ 3 phase 3 wires, 2 CTs (L1-L2)■ 3 phase 3 wires, 2 CTs (L1-L3)■ 3 phase 4 wires, star■ 3 phase 4 wires, delta■ 1 phase 2 wires

■ Technical information and values are according to ISO8528, ISO3046,NEMA MG-1.22, IEC 600341, BS 4999-5000, VDE 0530standards.

■ Producing with ISO9001, ISO14001, OHSAS18001, TSE, CE standards.■ All information given in this leaflet is intended for general purposes only.

TJ22PE5A

50 Hz Diesel Generator Sets

Control Panel Features-TJ 509-T

Functions

Communications

Topologies

SINGLE AND DOUBLE STAGE-RECIPROCATING AIR COMPRESSORS

STANDARD EQUIPMENTHigh quality components, such as IP55 electric motors

cast iron cylinder and crank cases, dynumically balanced

cast stell cranch shaft and counter weight, cast steel

connecting rods, CE certified air tanks complying

with SPVD and depigned as per EN 286-1 standart.

RELIABILITYDALGAKIRAN reciprocating compressors have laid the

foundation of the trust for the Dalgakıran

brand as they had been working for many years

in many different applications and industries, especially in

small enterprises since 1969, when they were first produced.

Dalgakıran reciprocating compressors, which are trouble-

free and with a long service life, may be used safely in

many applications with single and double stage options.

COMPRESSOR BLOCK

Cast iron cylinder with cooling fins and special aluminium alloy cylinder heads Specially designed high-speed stainless

steel concentric valves. Cast iron crankcases with high strength Dynamically-balanced cast steel crankshaft

and counterweight Special alloy aluminium pistons and steel

cast connecting rods Specially designed finger-type, high-capacity

stainless steel suction-discharge valves Stainless steel suction-discharge valves,

specially designed for high pressure strength

MAIN MOTOR AND DRIVE SYSTEM

High efficiency 400V/3 phase/50Hz IP55 electric motor

Special loadless start system and automatic

discharge system for loadless startGE

NE

RA

L FE

ATU

RE

S

SERIES

DKCSAFETY SYSTEMS Solenoid discharge valve for loadless

start (on models over 4 kW) Pressure switch Check valve Belt pulley guard Relief valve Easy tensioning of belt

OTHER FEATURES CE Certified air tanks complying with

SPVD (Simple Pressure Vessel Directive) and designed as per EN 286-1 standard Bearings with a long service life Air suction filter and silencer Impact lubrication system Starting panel (For 1.1 - 4 kW models)

SINGLE ANDDOUBLE STAGEReciprocating Air CompressorsDALGAKIRAN reciprocating compressors have laid the foundation of the trust for the Dalgakıran brand as they had been working for many years in many different applications and industries, especially in small enterprises since 1969, when they were first produced. Dalgakıran reciprocating compressors, which are trouble-free and with a long service life, may be used safely in many applications with single and double stage options.

MAIN MOTOR AND DRIVE SYSTEM Belt-pulley drive system Specially designed fan type pulleys Easy tensioning of belt

OPTIONS Automatic Condensate Discharge

Valve for the Air Tank Star delta motor starting panel

(For 5.5-7.5kW models)

MODEL PRESSURE

SUCTION CAPACITY

MOTORPOWERkW/HP

AIR CONNECTION

DIMENSIONS mm WEIGHTkg

AIR TANKlt

Bar PSI l/min SCFM Width Length Height

Single Stage Piston Series

DKT 100 8 115 205 7,2 1,1/1,5 1/2” 1202 426 894 93 80

DKC 150 8 115 327 11,5 1,5/2,0 1/2” 1202 426 914 106 80

DKC 200 8 115 410 14,5 2,2/3,0 1/2” 1531 450 1037 135 200

DKC 300 8 115 607 21,4 4,0/5,5 1/2” 1830 466 1145 209 250

DKC 500 8 115 1013 35.8 5,5/7,5 3/4” 1927 664 1291 308 500

DKC 600 8 115 1657 58.5 7,5/10 3/4” 1926 668 1413 390 500

Dual Stage Piston Series

DKKC 200 12 175 205 7,2 1,5/2,0 1/2” 1532 450 983 145 200

DKKD 15 15 215 507 17,9 4/5,5 3/4” 1832 474 1097 230 250

DKKD 12 12 175 856 30,2 7,5/10 3/4” 1920 658 1298 374 500

DKKD 15A 15 215 828 29.2 7,5/10 3/4” 1925 669 1406 439 500

* DALGAKIRAN compressors reserves the right to make changes on its products without prior notice.

TECHNICAL DATA

Eyüp Sultan Mah. Müminler Cad. No: 70 34885 Sancaktepe / Istanbul / Turkey Tel : +90 216 311 71 81 Fax: +90 216 311 71 91

www.dalgakiran.com