microsonic msm 9045ts 15 buzzer
TRANSCRIPT
-
7/31/2019 Microsonic MSM 9045TS 15 Buzzer
1/4
Unit C, 9/F, Candy Novelty House, No.164 Wai Yip Street,Kwun Tong, Kowloon, Hong KongTel: (852) 21112191 Fax: (852) 21109990E-mail: [email protected]
1 of 4 MSM-9045TS-15
SPECIFICATION FOR APPROVAL
RoHSITEM SMD MAGNETIC TRANSDUCER
OUR PART NO.
MSM-9045TS-15
CUSTOMER
CUSTOMER PART NO.
DATE
APPROVED BY
-
7/31/2019 Microsonic MSM 9045TS 15 Buzzer
2/4
Unit C, 9/F, Candy Novelty House, No.164 Wai Yip Street,Kwun Tong, Kowloon, Hong KongTel: (852) 21112191 Fax: (852) 21109990E-mail: [email protected]
2 of 4 MSM-9045TS-15
1. SPECIFICATION
No. Item Specification
1 Rated Voltage (V) 3
2 Operating Voltage (V) 2~4
3 Resonant Frequency (Hz) 2731
4 Coil Resistance () 152
5 *Sound Output at 10cm (dB) 85
6 *Current Consumption (mA) 80
7 Operating Temperature () -40+80
8 Storage Temperature () -40+85
9. Weight (g) 0.6
10 Case material and colour LCP / Black
2. DIMENSIONS (Unit:mm)Tolerance: 0.5mm Except Specified
-
7/31/2019 Microsonic MSM 9045TS 15 Buzzer
3/4
Unit C, 9/F, Candy Novelty House, No.164 Wai Yip Street,Kwun Tong, Kowloon, Hong KongTel: (852) 21112191 Fax: (852) 21109990E-mail: [email protected]
3 of 4 MSM-9045TS-15
3.FREQUENCY RESPONSE CURVE
-
7/31/2019 Microsonic MSM 9045TS 15 Buzzer
4/4
Unit C, 9/F, Candy Novelty House, No.164 Wai Yip Street,Kwun Tong, Kowloon, Hong KongTel: (852) 21112191 Fax: (852) 21109990E-mail: [email protected]
4 of 4 MSM-9045TS-15
4. RELIABILITY TEST
NO.ITEM
TESTING CONDITIONVARIANCE AFTER TEST
1High temp.storage life
The part shall be capable of withstanding a
storage temperature is +85 for 120 hours
2 Low temp.storage life
The part shall be capable of withstanding a
storage temperature is -40 for 120 hours
3 Temp. Cycle
Total 5 cycles,
1 cycle consisting of -402, 30 minutes
205 15 minutes
852, 30 minutes
205 15 minutes
4 Humidity Test 402, 9095% RH, 120 hours
5 Vibration Test
The part shall be subjected to a vibration cycleis 10Hz in a period of 1 minute. Total peak
amplitude shall be 1.52mm(9.3g).
The vibration test shall consist of 2 hours perplane in each three mutually perpendicular
planes for a total time of 6 hours.
6 Shock
Sounder shall be measured after being
applied shock (980m/s) for each threemutually perpendicular directions to each of
3 times by half sine wave.
7 Drop Test
Dropped naturally from 700mm height onto
the surface of 10mm thick wooden board. 2
directions-upper and side of the part are to be
applied.
After the test the part shall
meet specifications withoutany degradation in
appearance and
performance except SPLshall be initial value 10dB
or more.
8 Lead pull
The part shall be pushed with a force of 9.8N
for 101 seconds behind the part.After the test part shall meetspecifications without any
degradation in appearance
and performance.
9
Recommendedtemp. Profilefor Reflow
Oven