nano steam ryer - 第一実業株式会社 improvements (sensitive drying nature, prevents surface...
TRANSCRIPT
2018.04
Nano Steam Dryer~過熱水蒸気炉~
本社〒101-8222 東京都千代田区神田駿河4丁目6番地(御茶ノ水ソラシティ)TEL: 03-6370-8633 FAX: 03-6370-8601
福岡支店〒812-0011 福岡県福岡市博多区博多駅前1丁目4番4号(JPR博多ビル)TEL: 092-441-1565 FAX: 092-441-1583
ソウル支店3003, Trade Tower, 511, Yeongdong-daero, Gangnam-gu, Seoul 06164, KoreaTEL: +82-2-551-2500 FAX: +82-2-551-2512
http://www.djk.co.jp/
プラント・エネルギー事業本部 エナジーシステム部
DAIICHI JITSUGYO (AMERICA), INC.939 AEC Drive, Wood Dale, Illinois 60191, U.S.A.TEL: +1-630-875-6044 FAX: +1-630-875-0422
DJK EUROPE GMBHMergenthalerallee 79-81, D-65760 Eschborn, GermanyTEL: +49-6196-776-14-18 FAX: +49-6196-776-14-19
上海一実貿易有限公司SHANGHAI YISHI TRADING CO., LTD. Room 13F02-06, Aetna Tower No.107, Zunyi Road, Shanghai 200051, P.R.ChinaTEL: +86-21-6237-5800 FAX: +86-21-6237-5288
一實股份有限公司DJK (TAIWAN) CORP.12F-1, 23, Sec. 1, Bade Road, Taipei, 10058, TaiwanTEL: +886-2-2327-8831 FAX: +886-2-2327-9927
大阪支社〒530-0005 大阪府大阪市北区中之島3丁目6番32号(ダイビル本館)TEL: 06-4967-3028 FAX: 06-4967-3050
■ターゲット設備
■効果
乾燥方式 乾燥方式
対 象
Nano Steamとは、200℃以上で急激に加熱された水蒸気
・凝縮熱伝達・対流熱伝達による急速昇温
・炉長短縮 (乾燥時間短縮・ライン速度UP・ランニングコストDOWN・省エネ)
・乾燥効果 (炉内超微風構造・表面乾燥抑制・調湿・炉内低酸素)
炉長短縮
Nano SteamZONE
基材温度
予熱 減率恒率
熱風ZONE
基材温度
150℃
20℃
150℃
20℃
予熱 減率恒率
Nano SteamDryer
乾燥前 乾燥後
乾燥前 乾燥後
表面処理(水性 or 溶剤)工程
成形品
成形品
粉体
粉体
シート状の製品(垂直方向も対応可) 成形品・粉体 他 成形品・粉体 他
バッチ炉
乾燥設備400℃以下
ex) 対象フィルム
Nanoサイズの過熱水蒸気
Nano Steam Dryer目に見えない超微粒子の過熱水蒸 気で、目に見える乾燥工程改善を
Nano Steam Dryer
従来乾燥方式
表面処理(水性 or 溶剤)工程
従来乾燥方式 基材の予熱乾燥領域が広い
熱風ZONE
凝縮熱伝達・対流熱伝達により、急速昇温を実現し、予熱乾燥領域を狭くする事ができる。Nano Steam Dryer
概略仕様
発生器(10kw)
炉体寸法 1500×600×650
*巻取・巻出機構含まず
ユーティリティ(参考)
ボイラヒータ : 30kw
水 源 : 純水 0.5MPa
空気源 : 圧力 0.7MPa以下
乾燥方式 概略仕様
発生器(20kw)
炉体寸法 1000×500×350
ユーティリティ(参考)
ボイラヒータ : 30kw
水 源 : 純水 0.5MPa
空気源 : 圧力 0.7MPa以下
Visible drying process improvement with invisible superheated steam
Conventional DryerConventional Dryer Slow heat ramp-up time
Hot air zone
Hot air zone
Rapid temperature ramp-up by using condensed heat and convection heat transfer to drastically shorten heat ramp-up time
Heat ramp-up Constant-temp Cool-down
Ramp-up Constant-temp Cool-down
Shorter furnacelength
Material temperature
Material temperature
Heater (10kw)
Furnace size 5×2×2 ft
*Winding / Un-winding not included
Heater (20kw)
Furnace size 3×2×1 ft
Boiler heater : 30kw
Water source : Pure water 0.5Mpa
Air : Under 0.7Mpa
Boiler heater : 30kw
Water source : Pure water 0.5Mpa
Air : Under 0.7Mpa
Specification summary Utility (ref)Dryer type
Specification summary Utility (ref)Dryer type
Nano Steam Dryer Test equipmentテスト機ラインナップ
Roll to Roll
Conveyor
Hot air IR Steam etc.
Hot air IRSteam etc.
Roll to Roll
Conveyor
Surface preparation process (water or solvent)
Before drying
Roll to Roll
Conveyor
Surface preparation process (water or solvent)
Before drying
After drying
After drying
Molded parts Powder
Drying Temperature under 400˚C
Molded parts Powder
Target film
Nano sized superheated steam
Nano steam=Superheated steam over 200˚C
Roll to Roll Conveyor BatchProcess
Applications Sheet type (Horizontal / vertical) Molded / Powder material Molded / Powder material
Rapid temperature ramp-up by using condensed heat and convection heat transfer
Process improvements (Smaller footprint, Shorter drying time, Reduced running cost)
Product improvements (Sensitive drying nature, Prevents surface parchment, Conditioning)
Process and Applications
Advantages