:Activate - , , .Clear trash - IDM, - . . , .Disable updates - ( - " ?"). IDMan.exe(IDMGrHlp.exe) - - - , . . . / ( . (- 3 )) - , 'Activate' ( XP . - XP x64 , , : - pawel97 / ru-board - xanax / nsane* . , "MData" (- *CLSID, ) - p.s. ( without_uac), Buttons:Activate - the ativation, as default on user account name, you can enter any other name.Clear trash - Remove trashkeys of IDM from registry, which can be created in experiments with registration, or using some other patches, etc.If there are no problems with the activation, may be not use.Disable updates - disable update checking (with activation has nothing to do and no effect on it, added because of the frequently askedquestion - "how to remove the check for updates?").This activator required without patching IDMan.exe (IDMGrHlp.exe) and any blocks (via hosts, firewall, and so on). Itself is do nothing patchand does not add any blocks - activation is built to adding to the registry "right" keys for the IDM.Also, after starting to use activator - do not use other keys, keygens and patches for registration, for this use ONLY subj,because binding to the key from activator. When/If activation expired (normal conditions should work about 100 days, you can simplyperiodically repeat it (about once every 3 months) - to activate again on the button 'Activate' (if necessary*, use 'Clear trash').On OS above XP run activator as administrator. Important - support XP x64 not do, though, in theory it should work.Activator is made on methods:Activation - pawel97 / ru-boardClear trash - xanax / nsane* When you first start the activator, this also needs to be done. If after this activation all the same does not work, then open the registry and searchkeys containing a parameter named "MData" (somewhere in *CLSID, usually) - delete all results and repeat the activation.p.s. Added variant without requesting administrative privileges (in the folder "without_uac"), because of says that there are problems with UAC and so on.