905_644_5
Post on 13-Sep-2015
212 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
Prak
la B
ohrte
chni
kRB 40
Mquina Perforadora-Rotativa UniversalRotary Drilling Rig
905-644-5_11-2014_RB40.indd 1905-644-5_11-2014_RB40.indd 1 21.01.2015 11:40:1321.01.2015 11:40:13
-
RB 40 PRAKLA Bohrtechnik GmbH 11/2014
9050
4000
11850
4000
9623
1630
450
7200
1970
13150
RB 40
La Maquina de perforacin mvil con una carga de gancho de 400 kN La RB 40 con una capacidad de tiro de 400 kN ha sido completamente modernizada, potenciada y diferenciada de su modelo anterior.
El taladro multipropsito RB 40 permite perforar diferentes dimetros hasta 40 (1,016 mm) mediante los siguientes mtodos:
Perforacin de circulacin directa l Perforacin de circulacin inversa l Perforacin giratoria en seco con lbarrena (perforacin helicoidal) Perforacin con tubo testigo (saca lncleos) Perforacin de testigo mediante cable lWire Line Perforacin con martillo en fondo l Perforacin de percusin con cable l
The mobile rotary drilling rig with 400 kN hook load capacityThe universal rotary drilling rig RB 40 has been completely reworked and upgraded, technically as well as power-wise.
The PRAKLA RB 40 Universal Drilling Rig enables each user to drill with the following methods, with borehole dia meters up to 40" (1.016 mm):
Rotary-drilling with direct circulation, l Rotary-drilling with reverse circulation, l Auger drilling, l Percussion core drilling (ram coring), l Wire-line core drilling, l Down-The-Hole hammer drilling, l Free-fall drilling l
905-644-5_11-2014_RB40.indd 2905-644-5_11-2014_RB40.indd 2 21.01.2015 11:40:1421.01.2015 11:40:14
-
PRAKLA Bohrtechnik GmbH 11/2014 RB 40
Especificaciones tcnicas Technical specifications
Chassis Chassis
Camin 3 Ejes 3-axle-truck 6 x 6 6 x 6
MAN TGA 33.440 e.g. MAN TGA 33.440 323 kW 434 HP
Torre de Perf. Mast
Altura torre s.n.suelo Mast height aGL 13,5 m 44.3 ft
Altura instalacin de Casing Casing installation height 8,0 m 26.2 ft
Carrera del Cabezal de Perf. Free working height power swivel 7,2 m 23.6 ft
Carga de Gancho operacin regular Regular operational hook load 350 kN 78,680 lbf
Carga de Gancho max. permitida Max. permissible hook load 400 kN 89,924 lbf
Avance (cylindros hidr.) Feed device (hydr. cylinder)
Pull down / Pull-back force Pull down / Pull-back force 80 / 190 kN 17,984 / 13,488 lbf
Velocidad de avance Feed speed 0 0,8 m/s 0 2.6 ft/sec.
Cabezal de perforacin (rot.) Power swivel
Caja de 3 Velocidades Gear select, 3 speeds
Torque a: 0 62 rpm Torque at 0 62 rpm 22.800 Nm 16,816 lbf-ft
Torque a: 0 120 rpm Torque at 0 120 rpm 11.600 Nm 8,556 lbf-ft
Torque a: 0 240 rpm Torque at 0 240 rpm 5.700 Nm 4,200 lbf-ft
Diametro Interior del Cabezal (paso) I.D. hollow shaft 150 mm 5 7/8"
Grua principal Main winch
Linea de tiro 1era vuelta Line pull 1st layer 95 kN 21,357 lbf
Linea de tiro (4-vuelta crane block) Line pull (4-fold crane block) 400 kN 89,924 lbf
Winche de Corazonamiento Coring winch
Linea de tiro 1era vuelta Line pull 1st layer 20 kN 4,500 lbf
Diametro del cable/ largo cable Wire rope diameter / Rope length 8 mm / 1.000 m 5/16" / 3,280 ft
Bomba Centrifuga Centrifugal pump
Capacidad descarga Discharge capacity 3.000 l/min. 793 gal/min
Presin oper. Operating pressure 7 bar 101 psi
Compresor de abordo Compressor
De Tornillo 1 etapa 1 Stage, Screw type Atlas Copco XAH 4 Atlas Copco XAH 4
Capacidad descarga Discharge capacity 13,2 m/min 466 cfm
Presin oper. Operating pressure 14 bar 203 psi
Accesorios adicionales Special equipment
Oiler Oiler
Bomba de espuma Foam mud pump
Bomba de Piston Piston mud pump
Guia de Cable corazonamiento Cable spooling device
Otras alternativas y accesorios de acuerdo a especifi caciones del Cliente tras revisin tcnica.
Further alternatives acc. to customer specifi cation after technical clarifi cation
905-644-5_11-2014_RB40.indd 3905-644-5_11-2014_RB40.indd 3 21.01.2015 11:40:1521.01.2015 11:40:15
-
prakla.de
Prak
la B
ohrte
chni
k
905.644.5 11/2014
Los desarrollos de diseo y las mejoras de procesos podran requerir la actualizacin o modifi cacin de especifi caciones y materiales sin previo aviso y sin que la empresa asuma responsabilidad alguna al respecto. Es posible que en las ilustraciones se incluya equipamiento opcional y no se muestren todas las confi guraciones posibles. Tanto las ilustraciones como los datos tcnicos se ofrecen a ttulo meramente indicativo. La empresa no se hace responsable de posibles informaciones errneas o erratas de imprenta.
PRAKLA Bohrtechnik GmbHMoorbeerenweg 331228 PeineAlemaniaTel: +49 51 71 90 55-0Fax: +49 51 71 90 55-100info@prakla.dewww.prakla.de
Design developments and process improvements may require the specifi cation and materials to be updated and changed without prior notice or liability. Illustrations may include optional equipment and not show all possible confi gurations. These and the technical data are provided as indicative information only, with any errors and misprints reserved.
905-644-5_11-2014_RB40.indd 4905-644-5_11-2014_RB40.indd 4 21.01.2015 11:40:1521.01.2015 11:40:15
top related