department of architecture arch 261 structural...
Post on 15-Mar-2021
5 Views
Preview:
TRANSCRIPT
10/9/2016
1
Asst. Prof. Dr. Ferhat PAKDAMARN Blok 1-17
pakdamar@gtu.edu.tr
Department of ArchitectureARCH 261
Structural Analysis
Why do we need to be educated?
Almanya’da bir Lise Müdürü, her eğitim öğretim yılı başında öğretmenlerine şu mektubu gönderirmiş:“Bir toplama kampından sağ kurtulanlardan biriyim.Gözlerim hiçbir insanın görmemesi gereken şeyleri gördü.İyi eğitilmiş ve yetiştirilmiş mühendislerin inşa ettiği gaz odaları, iyi yetiştirilmiş doktorların zehirlediği çocuklar, işini iyi bilen hemşirelerin vurduğu iğnelerle ölen bebekler, lise ve üniversite mezunlarının vurup yaktığı insanlar.Eğitimden bu nedenle kuşku duyuyorum.Sizlerden isteğim şudur.Öğrencilerinizin insan olması için çaba harcayın.Çabalarınız bilgili canavarlar ve becerikli psikopatlar üretmesin.Okuma yazma, matematik, çocuklarınızın daha fazla insan olmasına yardımcı olursa ancak o zaman önem taşır.”
10/9/2016
2
Why Structural Science ?
Aim of the structural science engineering
Classifications of structural systems and Loads
Review of Statically Determinate Structures
Review of Truss Systems
Deflections
Analysis for Indeterminate Structures
Course Overview
3
Course Overview
4
21.09.2016 Assumptions in structural analysesLoads definitions and classification of structures
28.09.2016 Assumptions in structural analysesLoads definitions and classification of structures
05.10.2016Equilibrium equations for frame systemsSupport conditionsStatically determinate and indeterminate systems
12.10.2016 Shear and moment diagrams for statically determinate structures
19.10.2016 Analysis of statically determinate truss system26.10.2016 Mid-term exam02.11.2016 Deflections for statically determinate beams and frames09.11.2016 Deflections for statically determinate trusses16.11.2016 Analysis methods for statically indeterminate systems23.11.2016 Moment distribution methods - 130.11.2016 Moment distribution methods - 207.12.2016 Reaction and member forces coefficients for trusses - 114.12.2016 Reaction and shear and moment coefficients for frames – 221.12.2016 Computer applications for structural analysis
Final exam
10/9/2016
3
Grading
Exam (1) : %25
: %25
Final Exam (1) : %50 Make-up Exam : %50
Attendance
(5)Homework
(1) Quiz
5
Materials
6
Barry Onouye with Kevin Kane, Statics and Strength of Materials for Architecture and Building Construction.
Hibbeler, Structural Analysis.
10/9/2016
4
Structural Analysis vsStructural Design
Structural Analysis;Structural analysis is the prediction of the performance of a given structure under prescribed loads and/or other effects, such as support movements and temperature change.
7
Structural Design;Structural design is the art of utilizing principles of statics, dynamics and mechanics of materials to determine the size and arrangement of structural elements under prescribed loads and/or other effects.
Buildings may have different functions: Residential: Housing, which includes low-rise (up to
2-3 floors), mid-rise (up to 6-8 floors) and high rise buildings.
Commercial: Offices, retail stores, shopping centers, hotels, restaurants.
Industrial: Warehouses, manufacturing.
Institutional: Schools, hospitals, prisons, church, government buildings.
Special: Towers, stadium, parking, airport, etc.
8
10/9/2016
5
Design of Structures- Safety- Esthetics- Serviceability- Environment- Economy
Idealization of Structures- Physical Model- Mathematical Model
Design Considerations;
Design of engineering systems is usually a trade-offbetween maximizing safety and minimizing cost.
9
Structural Analysis;Given an existing structure subjected to a certain load
determine internal forces (axial, shear, flexural, torsional; or stresses), deflections and verify that no unstable failure can occur.
Thus the basic structural requirements are:
Strength: stresses should not exceed critical values: < f
Stiffness: deflections should be controlled: < max
Stability: buckling or cracking should also be prevented
10
10/9/2016
6
A building structure safely transmits loads down to Earth
11
12
10/9/2016
7
Acceptances in Structural Analysis
1) The verifying systems are not depend on the loads.
13
2) Deflections should be too small.
14
3) Materials should behave linear-elastic.
4) The loads are assumed to be static.
10/9/2016
8
Two requirements must be imposed for the principle of superposition to apply :
1. The material must behave in a linear-elasticmanner, so that Hooke.s law is valid, and therefore the load will be proportional to displacement.
2. The geometry of the structure must notundergo significant change when the loads areapplied, i.e., small displacement theory applies.Large displacements will significantly changeand orientation of the loads. An example wouldbe a cantilevered thin rod subjected to a force atits end.
σ = P/Aδ = PL/AE
5) Principle of Superposition
15
End of the week 1
LOADSLoads are the external effects that cause stresses, deformations and displacement in structures.
The main purpose of a structure is to transfer load from one point to another: bridge deck to pier; slab to beam; beam to girder; girder to column; column to foundation; foundation to soil.There can also be secondary loads such as thermal
(in restrained structures), differential settlement of foundations, P-Delta effects (additional moment caused by the product of the vertical force and the lateral displacement caused by lateral load in a high rise building).
16
10/9/2016
9
17
LOADS
STATIC DYNAMIC
DEAD LOADS LIVE LOADSHYDROSTATIC
andSOIL PRESSURE
DEAD LOADS of STRUCTURAL COMPONENTS
FURNITURE
PEOPLE
SNOW
CONTINOUS IMPACT
EARTHQUAKE
WIND
Load Translation
18
Loads
Roof Load(Snow, Rain, Wind)
Slab Load Wall Load
Beam
ColumnWind,Earthquake
Foundation
10/9/2016
10
Clasisfications of Structural Elements
For their geometry;
1. 1-d structural elements.
2. 2-d structural elements.
3. 3-d structural elements.
19
20
10/9/2016
11
21
22
10/9/2016
12
23
24
10/9/2016
13
1. Statically Determinate Systems(isostatic)
2. Statically Indetreminate Systems
25
For the Analysis of structures
If support reactions and internal forces can be found only using equations of equilibrium then thestructural systems, under various loading are calledIsostatic or statically determinate systems.
26
The aim of analyzing a system is to define;
Reaction forces,
Internal Forces and
Deflections
10/9/2016
14
27
Equations of Equilibrium
The equations of equilibrium in Static State are:
0X
0Y
0M
Newton's laws of motionFirst law: When viewed in an inertial reference frame, an object either remains at rest or continues to move at a constant velocity, unless acted upon by an external force.
Second law: F=ma The vector sum of the forces F on an object is equal to the mass m of that object multiplied by the acceleration vector a of the object.
Third law: When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body.
The three laws of motion were first compiled by Isaac Newton in his Philosophiæ NaturalisPrincipia Mathematica (Mathematical Principles of Natural Philosophy), first published in 1687
28
Supports ConnectionsSupport connections - Structural members can be supportedin a variety of methods, the most common are pin and fixed supports
A pin support preventsdeflection; allows rotation
A fixed support prevents deflection androtation
A roller support allowsdeflection and rotation
10/9/2016
15
29
30
10/9/2016
16
31
32
10/9/2016
17
33
Examples forWrong Structural Design
Folder 01
Sources
1. H.Can, Çözümlü Örneklerle Yapı Statiği, Birsen Yayınevi,2008.
2. Özer E., Yapı Statiği Ders Notları
3. Kutaniş M., Yapı Statiği Ders Notları
4. 3. Çakıroğlu, A.,Çetmeli, E., Yapı Statiği I, Beta Yayım Dağıtım,İstanbul, 11. Baskı, 2001.
5. Hibbeler, R. C., “Structural Analysis”, Prentice Hall, Revised Printing, 2002.
6. Saouma,V. Structural Concepts and Systems for Architects.
34
top related