platinum megagrip
Post on 07-Feb-2017
86 Views
Preview:
TRANSCRIPT
MegaGrip Is Platinum’s Specialist Solution For A Commercial Glass Balustrade.
11
MEGAGripCommercial Frameless Balustrade
3kN Loadings
Simple to install
No specialist tools
Durable
Clamps simply attach to the glassand can be placed in the channel
Standard 13mm socket to adjust andtighten the clamp
Anodised to (20 micron) A4 gradestainless steel
25-33mm glass types all achieveless than 25mm deflection
Each panel of glass can be fullyadjustable after installation of the channel
����
����
����
����
����
����
����
� � �� �� �� �� ��
/RDG��N1
�
'HIOHFWLRQ��PP�
Chart 2 � /RDG�'HIOHFWLRQ�&XUYH�IRU�3XUH�9LVWD�6SLJOLWH�3UR�%DOXVWUDGH�6\VWHP
��PP�7RXJKHQHG
��PP�7RXJKHQHG
��PP�/DPLQDWHG�(9$Key
Test Report: �������5HI� �
3DJH����RI����3DJHV
1
Squeeze the glass clamps onto the glass (4 per metre)
Seat the glass within the channel
Insert the clamp bar through the anchor and loosely tighten the bolt.
Slide the grapple clasps down and through the channel so they sit in position on the glass clamp.
Adjust the glass into desired position and tighten the nuts on each side of the MegaGrip system to 15Nm.
Finally, insert the gasket into the top recess of the cladding and firmly press on to the channel.
2
2
3 4
5 6
Megagrip is so easy to install
1
3
5
2
4
6
3
������
��
�������
�������
Glass Span
(mm)
Glass Type Test Height
(mm)
Working Line
Loads or System
(kN/m)
Deflection at
Working Line Load
for System (mm)
1000
1000
1000
1000
31.5mm
1100 3.0
16.55
14.67
11.00
13.213.0
3.0
3.0
1100
1100
1100
25mm
33mm
25.5mm
Toughened Monolithic
Toughened Laminated Sentry
Toughened Laminated PVB
Toughened Laminated PVB
Test results for steel
4
������
��
�������
�������
FITTING APPLICATIONSConcrete
M12 Bolt
SteelL-Bracket
Steel
Concrete screwConcrete
Bolt Size
Bolt Size
Hole Size
SteelThickness
SteelThickness
M12Thread
M10/12
5
PRODUCT CODE
BASE DRILLED MEGA GRIP SG-3100.NA-Clear anodised megagrip channel SG-3100.SAA - Satin anodised megagrip channel
GLASS CLAMP KIT SG-3225 - 25mm glass clamp kit SG-3226 - 25.5mm glass clamp kit SG-3231- 31.5mm glass clamp kit SG-3233 - 33mm glass clamp kit
SIDE CLADDING SG-3301 - Megagrip side cladding
DOWELL SG-5401
GASKET SG-3402- Wide gasket 25 & 25.5mm glass SG-3403- Thin gasket 31.5 & 33mm glass
TOP BEAD SG-3300 - Megagrip top bead
MEGA GRIP PARTS AND ACCESORIES
MEGA GRIP FULL KIT SG-300.BF KIT
Explore Our Range
6
Up to 1.5 kN Loadings
Ease of Adjustment
Simple to Install
Excellently EngineeredLightweight design with precision design to keep strengh
Glass clamps are easily installed before positioning the glass
At the turn of a screw watch the glass maoeuvre
For uses from domestic to light commercial
Only 2 spigots & fixings requiredper metre
Extremely quick to install, elongated holes to allow for easyalignment
No need to drill the glass
No drainage issues
Uses the proven adjustmentsystem as Posi-glaze
Our glass clamping mechanism removes the need tohold the glass with locking pins
Free drainage between the spigots means no watergets trapped inside the balconey area
Horizontal alignment to each glass pane, ensuring thetop edge of the glass is equal
top related