第八、九章 i/o系統d92005/visualcpp_slide/8-9.pdf第八、九章i/o系統...
TRANSCRIPT
-
第八、九章 I/O系統
檔案I/O的基本概念格式化I/O建立自訂的嵌入子
建立自訂的擷取子
自訂I/O與檔案
-
檔案I/O的基本概念
C++對I/O的支援是放在中, 而Class ios包括有許多成員函數與變數可以用來控制和監督串流的運作.要處理檔案I/O,心必須#include,它包含了ifstream,ofstream and fstream,而這些class是衍生自istream,ostream而此兩個class是衍生自ios
-
檔案I/O的基本概念
在C++中,開啟一個File就是鏈結到一個stream;而stream有三種型態:ifstream in; // inputofstream out; // outputfstream io; // input and output一旦建立stream後,利用open()便可以將stream與file 鏈結在一起.
-
OPEN()函數
void ifstream::open(const char *filename,openmode mode=ios::in);void ofstream::open(const char *filename,openmode mode=ios::in | ios::trunc);void fstream::open(const char *filename,openmode mode=ios::in|ios::out);
-
Openmode
ios::app //所有的輸出附加到檔案結尾ios::ate //將檔案指標移到檔案結尾ios::binary //以二進位模式開啟檔案ios::in //開啟檔案作為輸入使用ios::out //開啟檔案作為輸出使用ios::trunc //會覆寫之前同名的檔案
-
使用Open函數開啟檔案
Ofstream mystream;Mystream.open(“test”);判斷開啟與否
If(!mystream){cout
-
Stream的建構函數
儘管可以使用open()開檔,但更方便的方法則是使用
ifstream mystream(“myfile”);//open file因為在ifstream,ofstream,fstream中的建構函數會自動開啟檔案.判斷是否到檔案結尾則是用bool eof();關閉檔案則是用close();
-
檔案內容的讀寫
當file己開啟時,不在使用cin與cout來讀寫檔案,而是改成“>>”與“
-
開關檔範例1
#include#includeusing namespace std;int main(){ ofstream
fout("c:\\test.dat");if(!fout){cout
-
課後練習
寫一程式來計算檔案中的字元個數.
-
格式化的I/O
在每個stream中都有一格式化flag的集合,可以用來控制資料的格式;在class ios中就宣告了一列舉型別fmtflags它定義了skipws //忽略空白字元left //輸出向左靠攏oct //八進位輸出表示hex //十六進位輸出表示uppercase //字元輸出變大寫
-
格式化的I/O
showpos //顯示正數前加‘+’符號showpoint //在float時顯示小數點和其
後的零
scientific //以科學符號顯示fixed //以一般方式顯示要設定一格式旗標使用ios的成員函數setf() // fmtflags setf(fmtflags flags)ex: stream.setf(ios::showpos);
-
格式化的I/O
而unseft()函數可用來清除flag設定值void unseft(fmtflags flags);要了解目前flag的設定則使用flag()函數fmtflags flag();fmtflags flag(fmtflags f);
-
設定多種旗標格式範例
#includeusing namespace std;int main(){
// show using default setting
cout
-
改變大小寫範例
#includeusing namespace std;int main(){
cout.unsetf(ios::dec);cout.setf(ios::uppercase|ios::showbase|ios::hex
);cout
-
練習
寫一程式來設定cout flag.在show float 時可以show出小數點;另外以科學技號再加上大寫E來show出所有的float.
-
建立自訂的嵌入子
在C++中,輸出的動作被叫作嵌入,而“
-
建立自訂的嵌入子
第一個參數是對ostream的參考型態,這代表stream必須要是一個output stream第二個參數則代表要輸出的物件(也可以是一參考參數)嵌入函數傳回stream的參考,這是為了讓“
-
建立自訂的嵌入子
由於嵌入子左運算元是一stream;而右運算元是要輸出的物件,如果將嵌入子函數放進class變成成員函數,它的左運算元會自動由this指標被設為產生這個呼叫的物件.因此嵌入子不能放入class中.為了讓嵌入子函數可存取class中的成員則嵌入子要變為該class中的friend.
-
嵌入子範例-成為friend
#includeusing namespace std;class coord{int x,y;
public:coord(){x=0;y=0;}coord(int a,int b){x=a;y=b;}friend ostream &operator
-
嵌入子範例-成為friend
ostream &operator
-
嵌入子範例-不成為friend
#includeusing namespace std;class coord{public:int x,y;coord(){x=0;y=0;}coord(int a,int b){x=a;y=b;}
// friend ostream &operator
-
嵌入子範例-不成為friend
ostream &operator
-
建立自訂的擷取子
在C++中,輸入的動作被叫作擷取運算子(extraction operator),
istreamistream& operator>>(& operator>>(istreamistream& & stream, classstream, class--name ob) {name ob) {
// body or inserter// body or inserter
return stream;}return stream;}
-
擷取子範例
#include//using namespace std;class coord{
int x,y;public:coord(){x=0;y=0;}coord(int a,int b){x=a;y=b;}friend istream &operator>>(istream &stream,coord&
ob);friend ostream &operator
-
擷取子範例
istream &operator>>(istream &stream, coord& ob){
coutob.x>>ob.y;return stream;
}ostream &operator
-
擷取子範例
int main(){ coord a(1,1),b(2,3);
cout
-
自訂I/O與檔案結合開檔與“>>”和“
-
自訂I/O與檔案
ostream &operator
-
自訂I/O與檔案coord a(1,1),b(2,3);
ofstream out("c:\\test.dat");if(!out){cout
-
自訂I/O與檔案
coord c(0,0),d(0,0);in>>c>>d;cout
-
練習
請撰寫一class,它可以儲存一整數值和它最小的因數(factor),請加入嵌入子與擷取子.
第八﹑九章 I/O系統檔案I/O的基本概念檔案I/O的基本概念OPEN()函數Openmode使用Open函數開啟檔案Stream的建構函數檔案內容的讀寫開關檔範例1課後練習格式化的I/O格式化的I/O格式化的I/O設定多種旗標格式範例改變大小寫範例練習建立自訂的嵌入子建立自訂的嵌入子建立自訂的嵌入子嵌入子範例-成為friend嵌入子範例-成為friend嵌入子範例-不成為friend嵌入子範例-不成為friend建立自訂的擷取子擷取子範例擷取子範例擷取子範例自訂I/O與檔案自訂I/O與檔案自訂I/O與檔案自訂I/O與檔案練習