한국기기유화시험연구원mpi한국기기유화시험연구원mpi march 23, 2009...
TRANSCRIPT
한국기기유화시험연구원한국기기유화시험연구원MPIMPI
한국기기유화시험연구원한국기기유화시험연구원MPIMPI
March 23, 2009
한국기기유화시험연구원Korea Machinery-Meter and petrochemical Testing & Research Institute
1
MPI ‘s current status MPI ‘s current status
Institute’s Name :
Korea Machinery-Meter and petrochemical Testing & Research Institute
Representative : Yun Kwang, Kim
Offices : Headquarter in Seoul International Authorized Certified Measuring Center in Bundang The Fan and Energy Machinery Evaluation Center in Pyeongtaek & 5 Branches Established on April 23, 1969
Non-Profit organization in accordance with Article 32 of the Civil Law
Government agency in charge : the Korean Agency for Technology and Standards
Character Character
2
1969 : founded as the‘Korean Oil Testing Laboratory’
1991 : a meter verification organization
1991 : an internationally authorized testing organization
1994 : a KOLAS institute (KATS)
1997 : a precise measuring education organization for public officials
in charge of measuring
1998 : a designated KS mark certification screening organization,
a safety inspection organization
2001 : a technical character evaluation organization for inventions
(Korean Industrial Property Office)
2003 : an inspection agency for supply materials
(Public Procurement Service)
History History
3
History History
2004 : an Agency for water testing
(Ministry of Environment Republic of Korea),
an analysis organization for anti-red tide material
(Ministry of Maritime Affairs & Fisheries)
2005 : Memorandum of understanding between AMCA international
and MPI (the area of fan)
2007 : Medical device testing organization
(Korea food & drug administration) 2008 : a disignated inspection organization for children’s play
equipment and play facility safety (KATS),
ASTM response agency (KATS)
2009 : disignated as a Cooperation Organization for Standards Development
(KATS)
4
Organization & WorkforceOrganization & Workforce
※ 5 branches : Gyeonggi bukbu, Busan gyungnam, Daegu gyungbuk,
Daejeon choongchung, Gwangjoo honam
Head Office
office center team branch
2 1 1 11 5
official Technical Admin. Regular
2 97 13 112
organization
workforce
※ Technical : Doctorate degree holder (7) + Master’s degree holder (33)
5
MPI ‘s Major Duties MPI ‘s Major Duties
Legal meter form approval and verification, and measuring instrument calibration
Internationl cooperation project
[OIML-MAA(Mutual Acceptance Arrangement)]
Testing, analysis, evaluation (machinery, parts, oil products, etc.)
Research and development (standardization, commissioned research on the technical development of small and medium-sized enterprises, etc.)
Industrial products safety inspection, and medical devides testing and inspection
Education (public officials for measuring inspections, lubrication management education)
KS certification screening, ESQ certification, quality assurance(Q mark),
and technical training
Korea Laboratory Accreditation Scheme(KOLAS)’s calibration, testing, and inspection organization evaluations, etc.
‘De facto’ internationl standards in support of building systems –
responses from the ASTM mechanical and petro chemical fields
Major duties & Functions Major duties & Functions
6
1. Environment and hygiene fields - water analysis, fishery toxicity testing, etc.
2. Chemicals, including hazardous substances - detergents, adhesives, air fresheners, waxes, etc. 3. Toxicity tests – Skin stimulation test, oral toxicity test, etc.
4. Materials and chemicals for marine pollution prevention - oiling agents, oil fences, oil absorbents, etc.
5. Petrochemical products – lubricants, fuel oils, asphalts, etc.
6. Automobile necessities - anti-freezing solutions, braking solutions, window cleaning solutions, etc.
7. Organic, inorganic, and precise analysis fields
Testing Analysis Testing Analysis
7
Safety Inspections Safety Inspections
Target Item Major testing item Standards
Anti-freezing solutions Circular corrosion test
Safetyinspectionsstandards
Braking solutionsEquilibrium reflux steam
point
Window cleaning solution Freezing point
Adhesive Hazardous substances
Wax Melting point
Stationary bicycle Performance test
Running machine Performance test
Grass cutter blade Blade strength test
8
Form approval, Verification , and Calibration Inspecton of legal metersForm approval, Verification , and Calibration Inspecton of legal meters
1. Form approval testing and verification fields - Mass meters : Platform scale, Weight, Electric balance, Portable axle load scales, etc. - Thermo meters : clinical thermometer - Electric meter : Watt hour meter - Volu meters : Gas meter, Water supply meter, Lubricator, LPG meter, Oil meter, etc. - Pressure gauge : Hemomanometer - Calori meter : Integral calorimeter - Others : Grain moisture meter 2. Calibration fields - Mass : more than 10 scales, including Electric balance and Direct reading balance - Power : Compressive strength tester, Omnipotence materials tester, etc.
9
Research and DevelopmentResearch and Development
1. Governmental academic research services
2. Industrial-academia research consortium joint technical development project
3. Non-governmental development project
4. Technical training project
5. Standards enactment and standardization projects
6. Patent technology performance evaluation project
7. New product development and product performance evaluation
8. ASTM standards revisions activities
10
Education and publishing projectsEducation and publishing projects
1. Education - lubrication management - public officials in charge of measuring - practical measuring - industrial testing capability
improvements 2. Publishing - Machinery and Lubrication - Lubrication Management Handbook - Oil pressure hydraulic oil handbook - measuring technology, etc.
11
Fluid machinery and energy fieldsFluid machinery and energy fields
1. Fan(Ventilator)-related testing and evaluation [conclusion of MOU with Air Movement and Control Association(AMCA)]
2. Energy-related machinery and equipment testing and evaluation (waste heat recovery ventilator, multi air conditioner, system distributor, etc.)
3. Participation in large national policy projects, such as evvironmentally friendly energy plants
(participation in LNG plant project groups, and development and testing evaluation of vibration valves and ultra high vacuum valves)
12
Medical devices fieldMedical devices field
1. Testing and inspection of medical devices (Designated as a medical equipment testing organization by the Food and Drug
Administration(FDA), testing and inspection of body temperature measuring devices, physiological measuring devices, injectors, injection syringes, and electronic needles, etc.)
2. Duties relating to the safety and quality evaluation of medical devices (Valid period setting test and toxicity evaluation test)
13
Quality certification and reliability projectsQuality certification and reliability projects
1. Designated as a KS screening organization, the MPI is in charge of 186 products in the fields of B(machinery), M(chemistry), F(architectural materials), and R(transport), etc.
2. Performs quality certification for each item that goes through testing at the institute, using
Q mark, and designated ISO / IEC 17020, 17025 organization duties
14
ASTM related activitiesASTM related activities
1. ASTM A 240 (329LD) Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate,
Sheet, and Strip for Pressure Vessels and for General Applications revised and published
2. ASTM A 240 (445NF) Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate,
Sheet, and Strip for Pressure Vessels and for General Applications by POSCO
3. ASTM A 480 (heat treatment) Standard Specification for General Specification for General Requirements for Flat-
Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip by POSCO
4. ASTM A 480 (slit edge) Standard Specification for General Specification for General Requirements for Flat-
Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip by MPI
5. ASTM D 3306 (long lasting coolant) Standard Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service by MPI
15
Discussion &
selecting
Collect opinions from domestic companies before having Work No. issued
Including direct corporate visit, response committee meeting, seminars, and workshops
A standard plan selection is made, which may be revised, after discussions and reviews are made at the MPI’s response committee meetingswhich involve the participation of industry-academia research experts
Collecting opinions
Proposal
Domestic companies , members of theresponse committee or MPI will Participate in ASTM TC / SC meetings
And
present proposalsdirect to ASTM
Revision
SC meeting,Balloting reporting
TC meeting,Balloting reporting
Society review
Approval
Publising
16
Other fieldsOther fields
1. Testing and evaluation of K-mark products (products marked with actual weight) (government-designated testing and evaluation organization)
2. Safety certification of children’s play equipment and safety inspection of play facility
3. Multilateral mutual form approval by the conclusion of the OIML(International Organization of Legal Metrology) MAA(Mutual Acceptance Arrangement)
4. Mutual form approval by the conclusion of an MOU with the NMIJ(National Metrology Institute of JAPAN)
5. Promoting of MAA projects with the JEMIC (JAPAN Electric Meters Inspection Corporation)
17
Current Status of FacilitiesCurrent Status of Facilities
Volumeter 55 devices, including a gas flow meter
Electrometer 65 devices, including a comprehensive watt hour meter tester
Precise mass measurement
50 devices, including a mass comparator
Meter fallacy / error – Reliability
110 devices, including an air drier performance tester
Thermal fluid / floating
performance 80 devices, including a fan(ventilator) tester
Electronic characteristics
30 devices, including an electromagnetic wave resistance tester
Materials analysis 40 devices, including a omnipotent materials tester
Safety and others 230 devices, including a medical safety evaluation tester※ TOTAL : 660 testing devices※ PLAN : to add a watt hour meter tester, a fuel battery evaluation system, and a test beds for age-friendly products, etc.
18
Testing, Evaluation, and Certification
Organization with internationl Competitiveness
Medium-and long –term development direction Medium-and long –term development direction
A testing and evaluation organization for machinery parts and devices, such as fans(ventilators), pumps, and valves
An evaluation organization for chemical products that contain hazardous substances, such as oils, environmental pollutants, marine pollutants, and cosmetics
A measuring organization for meter form approval, verification inspection, etc.
An evaluation organization for industrial products and medical devices, so as to help improve quality of life and public safety
19
2005
2008
2010
2012Laying the ground work for the International Organization of Legal Metrology
Development and inprovement of the verification capabilities of machinery and meters of international standards
Growth into an international organizational for measuring machinery and the environmental, and legal measuring
Growth into a World-class testing & research organization for machinery environmental & legal measuring
20
Welcome to MPI!
21