product catalog

Product Guide1

PRODUCT GUIDE Color Natura RusticaCeder-Smooth

Plank FC-H2o M4-Sheathing

& RoofCS

Fire GuardCSI

SheathingXPS Tile

Backer Board

Application areaSiding - Cladding ««« ««« ««« ««« «« « «« « «

Exterior Sheathing « « « « « ««« « «« «

Wind barrier panel in partially/open facade « « ««« « «« ««« «« ««« «

Wet and damp areas « « « « «« «« «« «« «««

Foundation solutions - plinth « «« « « ««« « ««« «« «««

Fire protection of iron - steel, etc. « « « « « «« ««« «« «

Rendering board for Cladding/Façade « « « « «« « ««« ««« «««

Roof Panel with UL or FM classified roof covering « « « « « ««« «« « «««

SIPs -Dry walls - Ceilings « « « « «« ««« «« « «««

PropertiesAir permeable board « « «« « «« ««« «« «« «

Water Proff - zero capillarity ««« ««« «« «« «« « «« «« «««

Noncombustible ««« ««« ««« ««« ««« ««« ««« ««« «

Dirt-grafiti-resistant surface ««« ««« «« «« « « « « «

Termite resistant ««« ««« ««« ««« ««« ««« ««« ««« «

Easy to process/apply « « «« «« «« ««« «« «« «««

Hard and durable surface ««« ««« ««« ««« ««« « ««« «« «

Resistant to mold, fungus, etc. ««« ««« ««« ««« ««« ««« ««« ««« «««

Sound insulation «« «« «« «« «« «« «« «« «««

Good insualtion value « « « « « «« « « «««

Water resistant ««« ««« ««« ««« ««« ««« ««« ««« «««

Static load stability « « « « « ««« «« «« ««

Extraction force/strength fasterners in board « « « « «« ««« «« «« «

2

Siding solutionMATERIALThe Cedar-Plank has a natural cedar look and a soft texture. The Smooth-Plank has a very nice smooth clean look. Our Siding enhances and protects homes in all kinds of climates. Produced from strong fibre cement, with a wood structure or smooth, free of asbestos, it has a very durable and maintenance free surface. The Siding is ICC-ES certificated to ICC-ES AC 90 norms for fibre cement.

BASE COLOUR – NANO COATINGThe base colour of the board is natural dyed grey for DIY painting. Or factory Nano coating technology applied, which back reflect the Solar heat from 50% to 69% (white colour best). Factory colours can also be in transparent wood colours. Life time without fading can be up to + 8 years for factory applied coating.

RESISTANT TO MOULD AND FUNGUSThe Siding is very resistant to attack by fungus and mold and the Siding will not rot or degrade in humid environments.

APPLICATIONSSiding, can be fixed both vertical and horizontal.

3

CEDAR-Plank SMOOTH-Plank

Weight

Fire Properties

Dimenssions

Montage

Technical specification

Length standard Inches 10’

Width standard Cedar-Plank Inches 7,48”, 7,87”

Width standard Smooth-Plank Inches 7,48”, 7,87” to 4’

Thickness standard Inches 5/16”

Colour standard for DIY Cement grey

Standard factory ColoursOff White – Grey – Ocean Blueask for details

Tolerance thickness Inches +/- 0,011”

Tolerance length Inches +/- 1/8”

Tolerance width-- Inches +/- 1/8”

Asbestos % 0,0

Plank overlap Inches 1, 1/4”

Nails recommended inox / Wood Studs

Inches .09” Shank x .222 HD x 2” Long

Weight 1 pcs approx. 16 lb

Fire propertiesASTM E

136Non Combustible

• Cedar Plank • Smooth Plank • Fibre cementHygroscopic properties and PH

Thermal Properties

Elasticity GPa

Water absorbing capacity/non painted % < 25

Water absorbing capacity/painted % < 4

Expansion from dry to wet inches 0,059”

Moisture content by delivery % < 10

PH value PH 11

Thermal conductivity W/m C° 0,30

Thermal expansion coefficient mm/m C° 0,008

Elasticity along fibre net GPa 6

Elasticity cross fibre net GPa 6

4

Siding solutionMATERIALSColor-Exterior Siding panel is a high density fibre cement panel with light grey core and with smooth finish, fully covered PVDF painted surface. The backside of the panel is sealed with PU. The edges must be sealed after cutting. The surface also has anti-graffiti protection. The panel is air impermeable.

SURFACEColor-Exterior Siding has a tough, waterproof, durable and impermeable surface.

COLOURSColor-Exterior Siding can be supplied in any custom colour with more than 14000 sq ft per colour. Color-Exterior Siding is fully covered with two coats of PVDF varnish, which gives the surface a very consistent smooth look. It has a very high quality finish and it is UV resistant for up to 10 years without fading. The PVDF surface can be supplied from gloss 10-70.

RESISTANT TO MOULD FUNGUS, ETC.Color-Exterior Siding PH value of 11 makes the panel very resistant to attack by fungi and moulds. Color-Exterior Siding cannot rot or degrade in a humid environment.

APPLICATIONSFor Siding (mainly ventilated facade/ cladding). Can be used outside and inside without restriction.

MOISTURE-RESISTANTColor-Exterior Siding is not weakened when wet.

Siding panel of fibre cement with a smooth, painted, fully covering PVDF surface with UV filter.

5

Colour-Exterior Siding

Water Vapour TransmissionVapour diffusion resistance EN 12572:2001 impermeable

Hygroscopic properties and PH

Bending strength MPa

Elasticity GPa

Expansion from cold to warm 0,039”/3,2’ (- 4 – 104 Fahrenheit) 1.5

Moisture content at delivery % <18

PH value PH 11

Bending strength along the grid – dry MPa 22

Bending strength across the grid – dry MPa 17

Along the fibre grid GPa 7

Across the fibre grid GPa 6


• Exterior Siding Fibre Cement

Weight

Fire Properties

DimenssionsLength standard inches 8’/9’/10’

Width standard/max inches 4’

Thickness standard inches 5/16”

Tolerance thickness inches +/- 0,023”

Tolerance Length inches +/- 3/16”

Tolerance Width inches +/- 1/8”

Asbestos (none) % 0

Fire Class ASTM E 136 Non Combustible

Fibrecement classification and certification accordingAC 90 ICC-ES ask for full report

Density, dry lb/ft 3 93-96

Weight lb/pcs (4’ x 8’) 91

6

7

APPLICATIONSFor interior and exterior Siding (mainly ventilated façade/cladding). Can be used outside and inside without restriction.

MATERIALSHigh density fibre cement panels, dyed colours.

COLOURSNatura-Exterior Siding panel comes with semi coated surface in three dyed colours: anthracite - off-white and light grey. The front surface is in the same colour as the core, water-resistant and UV-protected, visible ground structure, the backside of the panel is UV coated. After cutting, edges must be sealed.

SURFACENatura-Exterior Siding has a slightly sanded front and rolled backing. The board is impermeable. The surface is uniform in colour and appearance between different batch series.

RESISTANT TO MOULD, FUNGUS, MOISTURE ETC.Natura-Exterior Siding PH value of 11 makes the board very resistant to attack by fungi and moulds, cannot rot or degrade in a humid environment and is not weakened when wet.

Siding solution

Siding Panel of dyed coloured fibre cement with semi-coated surface and UV filter.

NATURA-Exterior Siding

Water Vapour TransmissionVapour diffusion resistance EN 12572:2001 impermeable



Elasticity GPa

Expansion from cold to warm 0,039”/3,2’ (- 4 – 104 Fahrenheit) 1.5


PH value PH 11






• Exterior Siding Fibre Cement

Weight

Fire Properties







Asbestos (none) % 0





8

9

APPLICATIONSFor Siding, fascia board etc. Can be used outside and inside without restriction.

MATERIALSRustica Exterior Siding is a high density dyed coloured fibre cement panel. The panel is air permeable.

COLOURS - DYED FIBRE CEMENTThe panel is produced in the dyed soil colours: Natural white, Flint/Cement grey, Anthracite/Matte black, and in special cases, Sand and a Reddish or Green Soil Colour. Since the raw soil materials provide the dyed colours, different production batches can not be mixed, because there may be a colour difference between production batch/series.

COLOUR - FADINGRustica Exterior Siding is surface-treated with a waterproof front, which makes the front resistant to water and dirt and provides increased protection against UV fading. The panel can/will slowly develop a patina, depending on where it is mounted.

SURFACEThe Panel appears natural, in its earthy soil colours that is characteristic of dyed raw materials, The panel has a sanded front and the surface appears “natural raw” and there are small whitish specks in the surfaces that vary in size and number.

RESISTANT TO MOULD, FUNGUS, MOISTURE ETC.The PH value of 11, makes the panel very resistant to attack by fungi and moulds. The panel cannot rot or degrade in a humid environment and can absorb and release moisture an unlimited number of times without the board's strength properties deteriorating.

Siding solutionSiding Panel of dyed coloured fibre cement

RUSTICA-Exterior Siding

Water Vapour TransmissionVapour diffusion resistance EN 12572:2001 air permeable



Elasticity GPa

Expansion from cold to warm mm/m (-20 to +40 degrees 1.5


PH value PH 11






• Rustica Exterior Siding Fibre Cement

Weight

Fire Properties







Asbestos (none) % 0





10

11

APPLICATIONSIntended for all possible Wet area applications and as building/ siding panel for DIY paint treatment as required on site.

MATERIALSThe FC-H2o Panel is a fibre cement panel in high density, supplied untreated and in dyed light sand/grey colour. Fire rating, according ASTM E 136 Non combustable. The panel is air permeable whenuntreated from factory.

SURFACE AND SURFACE TREATMENTThe panel has a very hard and smooth surface, ideal for DIY painting – as water proofing membrane for wet room area etc. When treating with paint or primer, it is important all exposed sides are with treatment, so that the panel does not distort.

RESISTANT TO MOULD FUNGUS, ETC.The Panel high PH value of 11 makes the board very resistant to attack by fungi and moulds. The panel cannot rot or degrade in a humid environment.

MOISTURE-RESISTANTThe panel is not affected by wet conditions and it can absorb and release moisture an unlimited number of times without the board's strength properties deteriorating.

Siding solution

Wet area /siding/building panel of dyed, untreated Fibre CementAC 90 ICC-ES CERTIFICATION

FC-H2O Panel

Water Vapour TransmissionVapour diffusion resistance EN 12572:2001 air permeable



Elasticity GPa

Expansion from cold to warm mm/m (-20 to +40 degrees 1.5


PH value PH 11






• FC H2O Panel

Weight

Fire Properties

Dimenssions




Length Standard inches 5'/8’/9’/10’

Width Standard/max inches 3'/4’

Thickness Standard inches 1/4” 5/16” 3/8” 1/2” 5/8”

Tolerance Thickness inches +/- 0,023”



Asbestos (none) % 0

12

MATERIALSThe M4-Exterior Sheathing is Fibre reinforced, produced with composite materials as pure Magnesium Sulphate, MgO, expanded Perlite, other agents and strong alkali free glass fibre mesh. It is a 100% asbestos and silica free. The board appears in its natural off white colour as standard and has a hard and durable surface.

MOISTURE RESISTANT/ABSORPTION/SALTThe M4-Exterior Sheathing has very limited moisture absorption from air humidity, compared to normal MgO boards, the board does not contain any chloride ion (salt), resulting in corrosion of screws – nails – windows etc.The board can absorb and release moisture an unlimited number of times, without changes in the board strength properties. The board is vapour permeable and insulation can be mounted directly on the backside, when used in ventilated constructions with closed vapour barrier.

RESISTANT TO TERMITES, MOLD AND FUNGUSThe M4-Exterior Sheathing will not rot or degrade in humid environment. The PH value makes the board very resistant to attack by termites, fungus and mould.

APPLICATIONSExterior Sheathing, SIPs. The panel is a very versatile and useful building board with very good racking resistance for both residential and commercial building construction. It is suitable for a wide range of general building sages and for applications requiring fire rating and non fire rating as well as termite, mold and mildew control.

13

For the high performance build environmentICC-ES AC 386 and AC376 tested

M4-Exterior Sheathing

Water vapour transmission (23 degree +/- 5% RH)


Thermal properties

Bending strength 5/8”

Absorption of humidity from air % < 8%Expansion from dry to wet % < 0,15Moisture content by delivery % < 18PH value PH 10

Thermal conductivity W/mC° 0,3001R value m2xK/W 0,104Thermal expansion coefficient mm/m C° 0,006

Bending strength along fibre net – dry EN 520 /MPa 12,2Bending strength cross fibre net – dry EN 520/MPa 11,3


• M4 - Exterior Sheathing

Weight

Fire Properties

Dimenssions


Length standard Inches 5’ 8’ 10’

Width standard/max Inches 3’ 4’

Thickness standard Inches ¼” 5/16” 3/8” ½” 5/8”

Colours standard Off white

Tolerance Thickness Inches +/- 0,023

Tolerance Length Inches +/- 3/16”

Tolerance Width Inches +/- 1/8”

Glass fibre mesh standard/max

Non akali fiberglass mesh

2 layer < ¼” 3 Layer > 3/8”

Fire class material ASTM E 84 Flame spread - index 10 or less

Fire class material ASTM E 84 Smoke- index 5 or less

Fire class material ASTM E 136 Non combustible

Z value 5/16” EN 12572 0,351Z value 5/8” EN 12572 0,884

Racking resistance 5/8”

Sound insulation

Pull through strength 5/8” (edge distance 1/2“)

Duo Fast nail 0,098” x 1,97” EN 520 1320 N/nail

Wall - one side M4 5/8” 1,97” distance nails/kN/M 10,6

>43dB if using: ½” M4 Exterior Sheathing + 1,97”Rockwool + : ½” M4 Exterior Sheathing

Duo Fast nail 0,098” x 1,97” EN 14566 154 NScrew 0,15” x 1,97” EN 14566 185 NPaslode U staples GA16 x 0,059” EN 14566 208 N

14

15

INSTALLATIONEase of installation, light panel, simply score and snap. Installation with UL or FM Classified Roof covering.

FIRE PROPERTIESRoofing specifications for steel deck installations often require a fire barrier as the component applied above the metal to help control and limit the amount of fuel contributed to a fire beneath the roof. The M4-Roof Panel is a Non combustible panel according ASTM E 136.

VERY ENERGY EFFICIENTAs energy cost rise, the importance of a good R-value is a key issue. The R value: m2xK/W - 0,104.

RESISTANT TO TERMITE, MOULD AND FUNGUSThe M4-Roof Panel will not rot or degrade in humid environment. The PH value makes the panel very resistant to attack by termites, fungus and mould.

MATERIALThe M4-Exterior Sheathing is Fibre reinforced, produced with compositematerials as pure Magnesium Sulfate, MgO, expanded Perlite, other agents and strong alkali free glass fibre mesh. It is a 100% asbestos andsilica free. The board appears in its natural off white colour as standardand has a hard and durable surface.

APPLICATIONSRoof applications requiring fire rating and non fire rating as well as termite, mold and mildew control.

Build a better roof – no gapping required

M4-Roof Panel



Thermal properties


Expansion from dry to wet % < 0,15


PH value PH 10

R value m2xK/W 0,104

Bending strength along fibre net – dry EN 520 /MPa 12,2Bending strength cross fibre net – dry EN 520/MPa 11,3


• M4 - Exterior Sheathing

Weight

Fire Properties

Dimenssions


Length standard inches 5’,8’,10’

Width standard/max inches 3’ 4’

Thickness standard inches ¼”, 5/16”, 3/8”,1/2”, 5/8”

Colours standard Off white

Tolerance Thickness inches +/- 0, 023”

Tolerance Length Inches +/- 3/16”


Glass fibre mesh standard/max

Non akali fiberglass mesh

2 layer/ 3 layer > 3/8”

Fire class material ASTM E 84 Flame spread - index 10 or less

Fire class material ASTM E 84 Smoke- index 5 or less

Fire class material ASTM E 136 Non combustible

Z value 7/16” EN 12572 0,351Z value 5/8” EN 12572 0,884

Racking resistance 5/8”

Sound insulation

Pull through strength 5/8” (edge distance 1/2“)

Duo Fast nail 0,098” x 1,97” EN 520 1320 N/nail

>43dB if using: ½” M4 Roof Panel + 1,97” Rockwool + ½” M4 Roof Panel

Duo Fast nail 0,098” x 1,97” EN 14566 154 NScrew 0,15” x 1,97” EN 14566 185 NPaslode U staples GA16 x 0,059” EN 14566 208 N

16

17

APPLICATIONSSteel Protection, Ventilation and Smoke extract ducts, Mechanical & electrical service enclosures, Service enclosures, Cable protection.

MATERIALSCS-Fire Guard is a non-combustible medium density calcium silicate board, tested in accordancw with ASTM E136. It is used for the construction of passive fire protection.

RESISTANT TO MOULD FUNGUS TERMITESThe panel is not weakened when wet. The high PH value makes the boardvery resistant to attack by fungi and moulds. The panel cannot rot or degrade in a humid environment or be attacked by termites.

FASTENING AND FIXINGScrews & Nails can be driven directly through boards, without pre-drillingprovided they are at least 1/2“ from the edge of the panel, and the back side of the board is fully supported. In areas of high humidity, galvanised nails should be used. Panel pins, oval or lost head nails should not be used. Nails should be located min 3/4” from corners.The most economical method of fastening is using pneumatic nailing and stapling equipment.

CUTTINGThe panel can be worked with conventional electrical wood working equipment. Cutting should be carried out using dust extractors. Operators should wear protective face masks.

Passive fire protection, cost effective and proven.

CS-Fire Guard



Thermal properties


Expansion from dry to wet % 0.06


PH value PH 10

Thermal conductivity W/mC° 0.22

Coefficient of thermal expansion mm/mC° 0.008

Bending strength – dry – longitudinally MPa 11

Bending strength – dry – across MPa 8


• CS-Fire Guard Calcium Silicate board

Weight

Fire Properties

Dimenssions


Fire class ASTM E 136 Non combustible

5/16” Z value (GPa m2 s/kg) EN 12572 0.551

5/16” Z value (GPa m2 s/kg) EN 12572 1.730

Length standard inches 5’/8’/9’/10’

Width standard/max inches 3’/4’

Thickness standard inches 1/4”, 5/16”, 3/8”,1/2”, 5/8”

Colour standard Sand coloured

Edge design right-angled, groved

Tolerance thickness inches +/- 0, 011



Asbestos % 0.0

18

19

APPLICATIONSAs render carrier for Stucco or as Siding panel, Exterior sheathing, where there are also requirements that the panel must be air permeable and structural. Normally, it is possible to insulate all the way up to the panel, provided the inside vapour barrier is sealed.

SPECIAL PROPERTIES:The surface is treated with a water repellent coating. The unique features: air permeable from the inside, (steam can leave the construction), waterproof front surface.

MATERIALSCalcium Silicate panel with surface coating.

MOISTURE-RESISTANT, TERMITES, MOULD FUNGUSThe panel is not weakened when wet. The high PH value makes the board very resistant to attack by termites, fungi and moulds. The panel cannot rot or degrade in a humid environment.

Render carrier and structural panel in one

CSI-Exterior Sheathing


Thermal properties


Expansion from dry to wet % 0.06


PH value PH 10

Thermal conductivity W/mC° 0.22

Coefficient of thermal expansion mm/mC° 0.008

Bending strength – dry – longitudinally MPa 11

Bending strength – dry – across MPa 8


• CSI-Exterior Sheathing Calcium Silicate board

Weight

Fire Properties

Dimenssions


Weight lb/pcs (4’x8’) approx. 73

Fire class ASTM E 136 Non combustible

Length standard inches 5’/8’/9’/10’

Width standard/max inches 3’/4’

Thickness standard inches 1/4”, 5/16”, 3/8”, 1/2“, 5/8”

Colour standard Sand coloured

Tolerance thickness inches +/- 0, 011



Asbestos % 0.0

Asbestos % 0.0

20

Product Guide21

product catalog

Documents