sunseekerflamencoshrug
TRANSCRIPT
7/28/2019 SunseekerFlamencoShrug
http://slidepdf.com/reader/full/sunseekerflamencoshrug 1/6
Designed by Cristna Mershon
Sunseeker Flamenco Shrug
DK297
7/28/2019 SunseekerFlamencoShrug
http://slidepdf.com/reader/full/sunseekerflamencoshrug 2/6
Flamenco Shrug - Size SMALL/MEDIUM
By Cristina Mershon
Finished Size: The final pattern is for a size Small/Medium.
Yarn: Cascade Yarns, Sunseeker (47% cotton, 48% acrylic, 5% metallic yarn) 100 g skeins/237 yards/217 me-
ters). Color: Red #06, 8 skeins.
Hook: Size F/5 - 3.37 mm. Adjust hook size if necessary to obtain correct gauge.
Notes: The shrug is worked in pieces that are assembled as you go. First, we create the back, then the sleeves, and
finally the neck edging.
Abbreviations:
beg = beginning
dc = double crochet
hdc = half double crochet
lps = loops
sc = single crochet
sl = slip stitch
sp = space
st = stitch
rp = repeat
yo = yarn over
5-dc pop st = 5 double crochet popcorn stitch
3-dc puff st = 3 double crochet puff stitch
Stitch Guide:
5 double crochet Popcorn Stitch (5-dc pop st): Work 5 double crochet stitches in the same stitch. Drop the loop
from your hook. Insert your hook from front to back under the top 2 loops of the first double crochet of the group.
Grab the dropped loop with your hook and pull it through the stitch.
3 double crochet puff stitch (3-dc puff st): Yarn over, insert hook in next st, yo, draw yarn through st, yo, draw
yarn through 2 loops on hook, repeat it again 3 times in same st or separate st, yo, draw yarn through 4 loops in
hook.
Puff shell (puff shell): 3-dc puff st, ch 2, 3-dc puff st, all in the same st.
Begining Puff shell (beg puff shell): Ch 3, 2-dc puff st, ch 2, 3-dc puff st, all in the same st.
Gauge: The square motif measures 8”x 8”
Sizes: To get different sizes, follow this guidelines:
For size Small/Medium: Work squares following SQUARE MOTIF instructions (10 rounds).
For size Large/XLarge: Work squares following SQUARE MOTIF instructions, plus add 2 extra rounds following
motif instructions (12 rounds).
7/28/2019 SunseekerFlamencoShrug
http://slidepdf.com/reader/full/sunseekerflamencoshrug 3/6
For size 2XL-3XL: Work squares following SQUARE MOTIF instructions, and keep working the pattern for two
more rounds (14 rounds).
PATTERN INSTRUCTIONS (Size SMALL/MEDIUM):
We will start working of the back for shrug first, which is constructed of 6 square motifs join-as
-you
-go along the
last round. To join-as-you-go the 3-ch lps, ch 1, insert hook in the finished motif you want to be joining with, ch 1,
keep working the pattern and joining as needed.
Square Motif (make 6)
Ch 6, sl st in beg ch to close circle.
Rnd 1: In circle, beg puff shell, * ch 3, sc in circle, ch 3, puff shell, rep from * three times for a total of 4 puff
shells, ch 3, sc in circle, ch 3, sl st in middle of 2 -ch lp from beg puff shell.
Rnd 2: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3 -ch lp], rep * three times to get three
3-ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times to get a
total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2-ch lp from beg puff shell.
Rnd 3: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3 -ch lp], rep * four times to get four 3
-ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times to get a
total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2 -ch lp from beg puff shell.
Rnd 4: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3 -ch lp], rep * five times to get five 3-
ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times to get a
total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2 -ch lp from beg puff shell.
Rnd 5: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3 -ch lp], rep * six times to get six 3-
ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times to get a
total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2 -ch lp from beg puff shell.
Rnd 6: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3 -ch lp], rep * seven times to get sev-
en 3-ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times to
get a total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2 -ch lp from beg puff shell.
Rnd 7: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3 -ch lp], rep * eight times to get eight
3-ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times to get a
total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2 -ch lp from beg puff shell.
Rnd 8: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3 -ch lp], rep * nine times to get nine 3
-ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times to get a
total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2 -ch lp from beg puff shell.
Rnd 9: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3-ch lp], rep * ten times to get ten 3
-ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times to get a
total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2 -ch lp from beg puff shell.
Rnd 10: Beg puff shell in middle of puff shell from previous rnd, *[ch 3, sc in 3 -ch lp], rep * eleven times to get
eleven 3-ch lps. **{Puff shell in middle of puff shell from previous rnd, and rep * three times}, rep ** three times
to get a total of 4 puff shells in the rnd. Finish the rnd with sl st in middle of 2 -ch lp from beg puff shell, fasten off.
Once you have the 6 motifs are joined together to form a rectangle, we need to attached or sew together two of the
7/28/2019 SunseekerFlamencoShrug
http://slidepdf.com/reader/full/sunseekerflamencoshrug 4/6
edges to form the arm openings (see PICTURE 1).
Now, we will start working on the sleeves/arm openings.
Sleeves and sleeve edging (make two)
Attach yarn where you sew the two sides of the rectangle together (see PICTURE 2). We will be working in rounds
to create a sleeve and the sleeve edging.
Rnd 1: Ch 1, sc in same beg ch, *[ch 3, sc in next 3-ch lp], rep * across until the end of the rnd. Sl st in beg ch.
Make sure you get a total of 28, 3-ch lps.
Rnd 2: Ch 1, sc in firt 3-ch lp, *[ch 3, sc in next 3
-ch lp}, rep * across until the end of the rnd. Sl St in beg ch.
Rnd 3-20: Rep round 2. At the end of the rnd 20, do not fasten off, we will continuing creating the sleeve edging.
The sleeve edging is created using the 3-ch lps from the sleeve, so it’s very important that you got a total of 28 3 -ch
lps for a perfect edging. The edging pattern is created using multiples of 4, so you will need four 3 -ch lps to create
one fan set.
Rnd 21: Ch 1, sc in next 3-ch lp, **{ *[ ch 3, sc in next 3-ch lp], rep * twice, 7 dc in next 3-ch lp, sc in next 3-ch
7/28/2019 SunseekerFlamencoShrug
http://slidepdf.com/reader/full/sunseekerflamencoshrug 5/6
lp}, rep ** across until the end of the rnd for a total of seven sets of 7 -dc fans. Sl st in beg ch.
Rnd 22: Ch 1, sc in next 3-ch lp, **{ ch 3, sc in next 3-ch lp, *[dc in next dc, ch 1], rep * six times in every dc, dc in last
dc, sc in next 3-ch lp}, rep ** across until the end of the rnd for a total of seven sets, sl st in beg ch.
Rnd 23: Ch 1, sc in next 3-ch lp, **{ ch 2, *[ skip dc, 5-dc pop st in ch between dc, ch 2], rep * six times for a total of 6
pop st. Skip last dc, sc in next 3-ch lp}, rep ** across until the end of the rnd for a total of seven sets, sl st in beg ch.
Rnd 24: Sl st in next 2 ch, skip 5-dc pop st, sl st in 2-ch lp, ch 1, sc in same 2-ch lp. *[ Ch 3, skip second 5-dc pop st, sc in
2-ch lp, ch 5, skip 5
-dc pop st/2
-ch lp/5
-dc pop st, sc in next 2
-ch lp, ch 3, skip 5
-dc pop st, sc in next 2
-ch lp. Ch 5, skip
last 5-dc pop st/2-ch lp/sc/2-ch lp/5-dc pop st, sc in 2-ch lp], rep * across until the end of the rnd. Instead working the last 5
-ch lp, do as follows: ch 3, dc in beg ch.
Rnd 25: Ch 1, sc in next 3-ch lp, **{ ch 3, sc in next 3-ch lp, *[dc in next dc, ch 1], rep * six times in every dc, dc in last
dc, sc in next 3-ch lp}, rep ** across until the end of the rnd for a total of seven sets. Instead working 3 ch and joining with
sl st, do as follows: ch 2, hdc in beg ch.
Rnd 26: Rep rnd 22.
Rnd 27: Rep rnd 23.
Rnd 28-39: Rep rounds 24 through 27. At the end of round 39, fasten off and weave in ends.
This are the instructions for one sleeve. You will need to follow the same instructions for the other (see PICTURE 3).
Now, we will be working the same edging from the sleeves into the body opening of the shrug.
Body edging.
Attach yarn body opening.
Rnd 1: Ch 1, sc in same beg ch, *[ch 3, sc in next 3-ch lp], rep * across until the end of the rnd. Sl st in beg ch. Make sure
that you get a total of 3-ch lps that are multiple of 4. For this size shrug, you should get a total of 76 3 -ch lps, that creates
19 fan sets.
7/28/2019 SunseekerFlamencoShrug
http://slidepdf.com/reader/full/sunseekerflamencoshrug 6/6
Rnd 2: Ch 1, sc in next 3-ch lp, **{ *[ ch 3, sc in next 3-ch lp], rep * twice, 7 dc in next 3-ch lp, sc in next 3-ch
lp}, rep ** across until the end of the rnd for a total of seven sets of 7 -dc fans. Sl st in beg ch.
Rnd 3: Ch 1, sc in next 3-ch lp, **{ ch 3, sc in next 3-ch lp, *[dc in next dc, ch 1], rep * six times in every dc, dc in
last dc, sc in next 3-ch lp}, rep ** across until the end of the rnd for a total of seven sets, sl st in beg ch.
Rnd 4: Ch 1, sc in next 3-ch lp, **{ ch 2, *[ skip dc, 5-dc pop st in ch between dc, ch 2], rep * six times for a total
of 6 pop st. Skip last dc, sc in next 3-ch lp}, rep ** across until the end of the rnd for a total of seven sets, sl st in
beg ch.
Rnd 5: Sl st in next 2 ch, skip 5-dc pop st, sl st in 2-ch lp, ch 1, sc in same 2-ch lp. *[ Ch 3, skip second 5-dc pop st,
sc in 2-ch lp, ch 5, skip 5-dc pop st/2-ch lp/5-dc pop st, sc in next 2-ch lp, ch 3, skip 5-dc pop st, sc in next 2-ch lp.
Ch 5, skip last 5-dc pop st/2-ch lp/sc/2-ch lp/5-dc pop st, sc in 2-ch lp], rep * across until the end of the rnd. Instead
working the last 5-ch lp, do as follows: ch 3, dc in beg ch.
Rnd 6: Ch 1, sc in next 3-ch lp, **{ ch 3, sc in next 3-ch lp, *[dc in next dc, ch 1], rep * six times in every dc, dc in
last dc, sc in next 3-ch lp}, rep ** across until the end of the rnd for a total of seven sets. Instead working 3 ch and
joining with sl st, do as follows: ch 2, hdc in beg ch.
Rnd 7: Rep rnd 3.
Rnd 8: Rep rnd 4.
Rnd 9-20: Rep rounds 5 through 8. At the end of round 20, fasten off and weave in ends.