typical martin products found in the oil & gas industry brochures/oil-field...of mud pumps,...

Martin Sprocket & Gear manufactures a wide range of Power Transmission, Bulk Material Handling, and Industrial Hand Tools, designed to work in harsh environments typically found in the oil industries.

Martin stocks thousands of products available for same day shipping and has the fastest turnaround times in the industry when it comes to alterations and made-to-order products.

• Power Transmission

• Bulk Material Handling

• Industrial Hand Tools

• Custom Commercial Forgings

• Made-to-Order

Martin Sprocket & Gear, Inc. • 3100 Sprocket Drive Arlington, TX 76015 • 817-258-3000www.martinsprocket.com

For more information contact a branch near you:

COPYRIGHT 2013 • Martin SPROCKET & GEAR, INC. • ALL RIGHTS RESERVED 1152 CB-OGC 1113

USAGeneral Offices

Sales and ManufacturingArlington, TX3100 Sprocket Drive 76015-2898P.O. Box 91588Arlington, TX 76015-0088817-258-3000 (FAX 817-258-3333)

Regional Manufacturing PlantsAlbemarle, NC (Conveyor Pulley Div.)306 Bethany RoadAlbemarle, NC 28001-8520 704-982-9555 (FAX 704-982-9599)

Burleson, TX555 N. Burleson Blvd. Burleson, TX 76028817-295-7151 (FAX 817-447-3840)

Danielsville, PA3376 Delps Road 18038-9515P.O. Box 267 • Danielsville, PA 18038-0267610-837-1841 (FAX 610-837-7337)Ft. Worth, TX (Conveyor Div.)3600 McCart AvenueFt. Worth, TX 76110-4692817-258-3000 (FAX 817-258-3173) Ft. Worth, TX (Tool & Forge Div.)3600 McCart AvenueFt. Worth, TX 76110-4692817-258-3000 (FAX 817-258-3173)

Montpelier, OH350 S. Airport RoadMontpelier, OH 43543-9329419-485-5515 (FAX 419-485-3565)

Sacramento, CA1199 Vine Street Sacramento, CA 95814-0426916-441-7172 (FAX 916-441-4600)

Scottdale, GA3303 Church Street 30079-1395P.O. Box 886 • Scottdale, GA 30079-0886404-292-8744 (FAX 404-292-7771)

Branch Manufacturing CentersBoston, MA357 Fortune Boulevard Milford, MA 01757-1723508-634-3990 (FAX 508-634-3998)

Charlotte, NC3901 Scott Futrell DriveCharlotte, NC 28208-3539704-394-9111 (FAX 704-394-9122)

Chicago, IL 1505 Birchwood Avenue Des Plaines, IL 60018-3001847-298-8844 (FAX 847-298-2967)

Denver, CO10800 East 54th Avenue Denver CO 80239-2124303-371-8466 (FAX 303-371-7116)

Houston, TX 9910 Bent Oak Drive Houston, TX 77040-3222713-849-4330 (FAX 713-849-4807)

Kansas City, MO1520 North Commerce AvenueKansas City, MO 64120-4961816-231-5575 (FAX 816-231-1959)

Los Angeles, CA5920 South Triangle DriveCommerce, CA 90040-3639323-728-8117 (FAX 323-722-7526)

Minneapolis, MN10601 Hampshire Avenue South Bloomington, MN 55438-2395952-829-0623 (FAX 952-944-9385)

Nashville, TN732 Massman DriveNashville, Tennessee 37210615-871-4730 (FAX 615-871-4125)

Portland, OR3030 Northwest Industrial StreetPortland, OR 97210-1734503-223-7261 (FAX 503-221-0203)

Tampa, FL3201 Queen Palm Drive Tampa FL 33619-1331813-623-1705 (FAX 813-626-8953)

Wayne, NJ7 High Point Drive Wayne, NJ 07470-7432973-633-5700 (FAX 973-633-7196)

Manufacturing Only

Abilene, TX • Clarksville, TX

Dallas, TX • Mansfield, TX

Paragould, AR

CANADA Sales and ManufacturingMartin Sprocket & Gear Canada Inc.Edmonton, Alberta4023/4027 53rd Avenue, Edmonton, Alberta, Canada T6B 3C6 780-450-0888 (Fax 780-465-0079)

Mississauga, Ontario896 Meyerside DriveMississauga, Ontario, Canada L5T 1R9905-670-1991 (FAX 905-670-2110)

Ayr, Ontario (Conveyor Div.)320 Darrell DriveAyr, Ontario, Canada N0B 1E0519-621-0546 (FAX 519-621-4413)

MEXICOSales and ManufacturingMartin Sprocket & Gear de México, S.A. de C.V.Guadalajara, JALAv. Colón Sur No. 6013, Edificio 1 Modulo 2Colonia Santa María TequepexpanTlaquepaque, Jalisco Mexico 45601+52 33-3283-1188 ([email protected])

Monterrey, N.L.Av. Industrial No. 100Lote 6 y 7, Manzana 11Parque Industrial La Silla ApodacaApodaca, N.L. México 66648+52 811 156 6830 ([email protected])

Toluca, MEXKm 52 Carretera, Naucalpan-TolucaCalle 3, Manzana VII, Lote 11Parque Industrial Toluca 2000Toluca, Edo. de México 50233 +52 722 276 0800 ([email protected])

SOUTH AMERICASales and ManufacturingMartin Sprocket & Gear do BrazilSão Paulo, SPSP 332 Km 154,5Artur Nogueira – São PauloCEP 13160-000C.P. 138Tel: 19 3877 4500

CHINAAsia Division HeadquartersMartin Sprocket & Gear (Shanghai) Co., Ltd.81 Tang Yao Road, Hua Ting Town, Jiading District,Shanghai 201816, P. R. ChinaTel.: 86-021-67084888 Fax: 86-021-67084889

Changzhou • Fuzhou • WuhanZhongshan •Tianjin • Harbin

PEOPLE: When you call Martin you get a person, not voice mail. We are ready, able and willing to help...Now!

SERVICE: Martin ships rebores and other alterations within hours - not days...MTO’s in days - not weeks.

INVENTORY: Martin delivers with incredible fill rates from one of its many facilities strategically located across North America.

Typical Martin Products found in the Oil & Gas Industry

#1052 Oil Field Capabilities.indd 6 11/20/13 8:07 AM

DRIVES

CIRCULATION SYSTEM

HOISTING SYSTEM 1. CROWN BLOCK ASSEMBLY 2. CATLINE BOOM AND HOIST LINE 3. DRILLING LINE 4. MONKEYBOARD 5. TRAVELING BLOCK 6. TOP DRIVE (Power Swivel) 7. MAST 8. DRILL PIPE 9. DOGHOUSE (not shown) 10. BLOWOUT PREVENTER CONTROL UNIT (Accumulator) 11. WATER TANK (not shown) 12. ELECTRIC CABLE TRAY (not shown) 13. ENGINE-GENERATOR SETS 14. FUEL TANK (not shown) 15. ELECTRICAL CONTROL (SCR) HOUSE (not shown) 16. MUD PUMPS 17. BULK MUD COMPONENT TANKS (P-Tanks) (not shown) 18. MUD TANKS (Pits) 19. RESERVE PIT (not shown) 20. MUD-GAS SEPARATOR (not shown) 21. SHALE SHAKERS (not shown) 22. CHOKE MANIFOLD (not shown) 23. PIPE RAMP 24. CATWALK 25. PIPE RACK 26. PIPE ON RACKRIG FLOOR27. HOOK28. SWIVEL29. KELLY30. ROTARY TABLE ASSEMBLY31. DRAWWORKS32. STANDPIPE (not shown)33. ROTARY (KELLY) HOSE

AUXILIARY BRAKE ROTARY DRIVES

BRAKES

FRICTIONCATHEAD

CATSHAFTAUTOMATICCATHEAD

FRICTIONCATHEAD

FRICTIONCATHEAD

DRILLER’SPOSITION

MAKEUPCATHEAD

CATHEAD DRIVEINERTIA BRAKE

TRANSMISSION CHAINS

700-hp ENGINE

700-hp ENGINE

700-hp ENGINE

BELT OR CHAIN DRIVEDELIVERS POWER TO PUMPS

COMPOUND

All rigs, land or offshore, require a mechanical or electrical system to transmit power from the prime movers to the rig components. Power-delivery systems are called drives.

On a mechanical drive the power is transmitted from the engines to the drawworks, pumps, and rig machinery through a transmission assembly known as the compound.

Martin products used: Sprockets, Gears, Sheaves, Bushings, Couplings.

Diagram of a Compound.

DRAWWORKS

CATWALK

DOGHOUSE

DOGHOUSE

CHOKEMANIFOLD

TRIP TANK

FLOOR(in raisedposition)

GASSEPARATOR

DOGHOUSE

MUD PIT NO. 1 MUD PIT NO. 2 MUD PIT NO. 3

DESANDER ANDDESILTER PUMP SKID SAMPLE HOUSE

(attachedto mud pit)

MUD PUMPNO. 1

COMBINED COMPRESSOR HOUSE(FUEL TANK STAND) WITH

TOP-MOUNTED FUEDL TANK

CELECTRICAL ANDPIPING SUITCASE

(5 Sections)CELECTRICAL ANDPIPING SUITCASE(4 Sections)

BOPACCUMULATOR


(6 Sections)

MUD PUMPNO. 2

DESANDER AND DESILTER SKID(attached to muc pit)

MUD PIT NO. 4

LOW PRESSURESKID MUD HOUSE (top)

PARTS HOUSE(Bottom)

CONTROLHOUSE

NO. 1

NO. 1

NO. 4

NO. 1

WATERTANKS

ENGINEHOUSES

NO. 2

NO. 3

TOOLROOM

NO. 3

Possible large land rig layout.

The hoisting system lifts the drill stem in and out of the hole while drilling a well and lowers the casing into the well. The hoisting system consists of the substructure, the derrick or mast, the drawworks (hoist), the crown block, the traveling block and hook, and the drilling line (wire rope).

The drawworks is essentially a large winch that spools off or takes in the drilling line, which lowers or raises the drill stem and bit. It also raises or lowers the derrick during rig-up and rig-down. The catheads mounted on the drawworks are used to screw or unscrew threaded pipe connections. It is usually the largest, most expensive piece of equipment on a rotary rig.

The drawworks brake system enables the driller to control tons of drill pipe or casing. The main brake is mechanical and can bring the load to full stop. The auxiliary brake is hydraulic and can control the speed of a loaded traveling block. It cannot bring it to a complete stop.

The crown block, the traveling block, and the drilling line support the load of pipe in the derrick as the pipe is lowered into or withdrawn from the hole. The Crown Block is a stationary set of large

sheaves mounted in the top of the derrick. It transfers the weight of the drill string from the drawworks through the drilling line and then to the derrick. The drilling line is threaded through grooves in the sheaves. These sheaves can be 5 feet in diameter or larger.

Wire rope suspends the traveling block from the stationary crown block. The traveling block is raised and lowered in the derrick as drilling progresses. The traveling block has several sheaves. Attached to the traveling block is a spring, which acts as a shock absorber, and a large hook. The hook can be attached to a cylindrical steel bar, or “bail,” which supports the swivel or the top drive.


TRAVELING BLOCK

HOOK

SWIVEL

API CERTIFIED SHEAVES


SHAFTGREASEFITTINGBEARING

Crown Block

Drawworks

Traveling Block & Hook

Mud Pumps

The circulating system circulates drilling fluid to the bit and back to the surface for cleaning and recirculation. The circulating system consists of mud pumps, rotary hose, swivel-to-top drive, drill stem, bit, mud return line, and mud tanks.

The mud pump is the primary component of any fluid-circulating system. Pumps are powered by attached electric motors or are driven by the compound. They may be double-acting two-cylinder (duplex) or single-acting three-cylinder (triplex) pumps.


1.

2.

3.

4.

5.

6.27.

28.

7.

8.

10.

13.

16.17.

25.

26.

23.

29.

30.31.


DRIVES

CIRCULATION SYSTEM

HOISTING SYSTEM1. CROWN BLOCK ASSEMBLY2. CATLINE BOOM AND HOIST LINE3. DRILLING LINE4. MONKEYBOARD5. TRAVELING BLOCK6. TOP DRIVE (Power Swivel)7. MAST8. DRILL PIPE9. DOGHOUSE (not shown) 10. BLOWOUT PREVENTER CONTROL UNIT (Accumulator) 11. WATER TANK (not shown) 12. ELECTRIC CABLE TRAY (not shown) 13. ENGINE-GENERATOR SETS 14. FUEL TANK (not shown) 15. ELECTRICAL CONTROL (SCR) HOUSE (not shown) 16. MUD PUMPS 17. BULK MUD COMPONENT TANKS (P-Tanks) (not shown) 18. MUD TANKS (Pits) 19. RESERVE PIT (not shown) 20. MUD-GAS SEPARATOR (not shown) 21. SHALE SHAKERS (not shown) 22. CHOKE MANIFOLD (not shown) 23. PIPE RAMP 24. CATWALK 25. PIPE RACK 26. PIPE ON RACKRIG FLOOR27. HOOK28. SWIVEL29. KELLY30. ROTARY TABLE ASSEMBLY31. DRAWWORKS32. STANDPIPE (not shown)33. ROTARY (KELLY) HOSE

AUXILIARY BRAKE ROTARY DRIVES

BRAKES

FRICTIONCATHEAD

CATSHAFTAUTOMATICCATHEAD

FRICTIONCATHEAD

FRICTIONCATHEAD

DRILLER’SPOSITION

MAKEUPCATHEAD

CATHEAD DRIVEINERTIA BRAKE

TRANSMISSION CHAINS

700-hp ENGINE

700-hp ENGINE

700-hp ENGINE

BELT OR CHAIN DRIVEDELIVERS POWER TO PUMPS

COMPOUND

All rigs, land or offshore, require a mechanical or electrical system to transmit power from the prime movers to the rig components. Power-delivery systems are called drives.

On a mechanical drive the power is transmitted from the engines to the drawworks, pumps, and rig machinery through a transmission assembly known as the compound.


Diagram of a Compound.

DRAWWORKS

CATWALK

DOGHOUSE

DOGHOUSE

CHOKEMANIFOLD

TRIP TANK

FLOOR(in raisedposition)

GASSEPARATOR

DOGHOUSE

MUD PIT NO. 1 MUD PIT NO. 2 MUD PIT NO. 3

DESANDER ANDDESILTER PUMP SKID SAMPLE HOUSE

(attachedto mud pit)

MUD PUMPNO. 1

COMBINED COMPRESSOR HOUSE(FUEL TANK STAND) WITH

TOP-MOUNTED FUEDL TANK


(5 Sections)CELECTRICAL ANDPIPING SUITCASE(4 Sections)

BOPACCUMULATOR


(6 Sections)

MUD PUMPNO. 2

DESANDER AND DESILTER SKID(attached to muc pit)

MUD PIT NO. 4

LOW PRESSURESKID MUD HOUSE (top)

PARTS HOUSE(Bottom)

CONTROLHOUSE

NO. 1

NO. 1

NO. 4

NO. 1

WATERTANKS

ENGINEHOUSES

NO. 2

NO. 3

TOOLROOM

NO. 3

Possible large land rig layout.

The hoisting system lifts the drill stem in and out of the hole while drilling a well and lowers the casing into the well. The hoisting system consists of the substructure, the derrick or mast, the drawworks (hoist), the crown block, the traveling block and hook, and the drilling line (wire rope).

The drawworks is essentially a large winch that spools off or takes in the drilling line, which lowers or raises the drill stem and bit. It alsoraises or lowers the derrick during rig-up and rig-down. The catheads mounted on the drawworks are used to screw or unscrew threaded pipe connections. It is usually the largest, most expensive piece of equipment on a rotary rig.

The drawworks brake system enables the driller to control tons of drill pipe or casing. The main brake is mechanical and can bring the load to full stop. The auxiliary brake is hydraulic and can control the speed of a loaded traveling block. It cannot bring it to a complete stop.

The crown block, the traveling block, and the drilling line support the load of pipe in the derrick as the pipe is lowered into or withdrawn from the hole. The Crown Block is a stationary set of large

sheaves mounted in the top of the derrick. It transfers the weight of the drill string from the drawworks through the drilling line and then to the derrick. The drilling line is threaded through grooves in the sheaves. These sheaves can be 5 feet in diameter or larger.

Wire rope suspends the traveling block from the stationary crown block. The traveling block is raised and lowered in the derrick as drilling progresses. The traveling block has several sheaves. Attached to the traveling block is a spring, which acts as a shock absorber, and a large hook. The hook can be attached to a cylindrical steel bar, or “bail,” which supports the swivel or the top drive.


TRAVELING BLOCK

HOOK

SWIVEL



SHAFTGREASEFITTINGBEARING

Crown Block

Drawworks

Traveling Block & Hook

Mud Pumps

The circulating system circulates drilling fluid to the bit and back to the surface for cleaning and recirculation. The circulating system consists of mud pumps, rotary hose, swivel-to-top drive, drill stem, bit, mud return line, and mud tanks.

The mud pump is the primary component of any fluid-circulating system. Pumps are powered by attached electric motors or are driven by the compound. They may be double-acting two-cylinder (duplex) or single-acting three-cylinder (triplex) pumps.


1.

2.

3.

4.

5.

6.27.

28.

7.

8.

10.

13.

16.17.

25.

26.

23.

29.

30.31.


Martin Sprocket & Gear manufactures a wide range of Power Transmission, Bulk Material Handling, and Industrial Hand Tools, designed to work in harsh environments typically found in the oil industries.

Martin stocks thousands of products available for same day shipping and has the fastest turnaround times in the industry when it comes to alterations and made-to-order products.

• Power Transmission

• Bulk Material Handling

• Industrial Hand Tools

• Custom Commercial Forgings

• Made-to-Order

Martin Sprocket & Gear, Inc. • 3100 Sprocket Drive Arlington, TX 76015 • 817-258-3000www.martinsprocket.com

For more information contact a branch near you:

COPYRIGHT 2013 • Martin SPROCKET & GEAR, INC. • ALL RIGHTS RESERVED 1152 CB-OGC 1113

USAGeneral Offices

Sales and ManufacturingArlington, TX3100 Sprocket Drive 76015-2898P.O. Box 91588Arlington, TX 76015-0088817-258-3000 (FAX 817-258-3333)

Regional Manufacturing PlantsAlbemarle, NC (Conveyor Pulley Div.)306 Bethany RoadAlbemarle, NC 28001-8520 704-982-9555 (FAX 704-982-9599)

Burleson, TX555 N. Burleson Blvd. Burleson, TX 76028817-295-7151 (FAX 817-447-3840)

Danielsville, PA3376 Delps Road 18038-9515P.O. Box 267 • Danielsville, PA 18038-0267610-837-1841 (FAX 610-837-7337)Ft. Worth, TX (Conveyor Div.)3600 McCart AvenueFt. Worth, TX 76110-4692817-258-3000 (FAX 817-258-3173) Ft. Worth, TX (Tool & Forge Div.)3600 McCart AvenueFt. Worth, TX 76110-4692817-258-3000 (FAX 817-258-3173)

Montpelier, OH350 S. Airport RoadMontpelier, OH 43543-9329419-485-5515 (FAX 419-485-3565)

Sacramento, CA1199 Vine Street Sacramento, CA 95814-0426916-441-7172 (FAX 916-441-4600)

Scottdale, GA3303 Church Street 30079-1395P.O. Box 886 • Scottdale, GA 30079-0886404-292-8744 (FAX 404-292-7771)

Branch Manufacturing CentersBoston, MA357 Fortune Boulevard Milford, MA 01757-1723508-634-3990 (FAX 508-634-3998)

Charlotte, NC3901 Scott Futrell DriveCharlotte, NC 28208-3539704-394-9111 (FAX 704-394-9122)

Chicago, IL 1505 Birchwood Avenue Des Plaines, IL 60018-3001847-298-8844 (FAX 847-298-2967)

Denver, CO10800 East 54th Avenue Denver CO 80239-2124303-371-8466 (FAX 303-371-7116)

Houston, TX 9910 Bent Oak Drive Houston, TX 77040-3222713-849-4330 (FAX 713-849-4807)

Kansas City, MO1520 North Commerce AvenueKansas City, MO 64120-4961816-231-5575 (FAX 816-231-1959)

Los Angeles, CA5920 South Triangle DriveCommerce, CA 90040-3639323-728-8117 (FAX 323-722-7526)

Minneapolis, MN10601 Hampshire Avenue South Bloomington, MN 55438-2395952-829-0623 (FAX 952-944-9385)

Nashville, TN732 Massman DriveNashville, Tennessee 37210615-871-4730 (FAX 615-871-4125)

Portland, OR3030 Northwest Industrial StreetPortland, OR 97210-1734503-223-7261 (FAX 503-221-0203)

Tampa, FL3201 Queen Palm Drive Tampa FL 33619-1331813-623-1705 (FAX 813-626-8953)

Wayne, NJ7 High Point Drive Wayne, NJ 07470-7432973-633-5700 (FAX 973-633-7196)

Manufacturing Only

Abilene, TX • Clarksville, TX

Dallas, TX • Mansfield, TX

Paragould, AR

CANADA Sales and ManufacturingMartin Sprocket & Gear Canada Inc.Edmonton, Alberta4023/4027 53rd Avenue, Edmonton, Alberta, Canada T6B 3C6 780-450-0888 (Fax 780-465-0079)

Mississauga, Ontario896 Meyerside DriveMississauga, Ontario, Canada L5T 1R9905-670-1991 (FAX 905-670-2110)

Ayr, Ontario (Conveyor Div.)320 Darrell DriveAyr, Ontario, Canada N0B 1E0519-621-0546 (FAX 519-621-4413)

MEXICOSales and ManufacturingMartin Sprocket & Gear de México, S.A. de C.V.Guadalajara, JALAv. Colón Sur No. 6013, Edificio 1 Modulo 2Colonia Santa María TequepexpanTlaquepaque, Jalisco Mexico 45601+52 33-3283-1188 ([email protected])

Monterrey, N.L.Av. Industrial No. 100Lote 6 y 7, Manzana 11Parque Industrial La Silla ApodacaApodaca, N.L. México 66648+52 811 156 6830 ([email protected])

Toluca, MEXKm 52 Carretera, Naucalpan-TolucaCalle 3, Manzana VII, Lote 11Parque Industrial Toluca 2000Toluca, Edo. de México 50233 +52 722 276 0800 ([email protected])

SOUTH AMERICASales and ManufacturingMartin Sprocket & Gear do BrazilSão Paulo, SPSP 332 Km 154,5Artur Nogueira – São PauloCEP 13160-000C.P. 138Tel: 19 3877 4500

CHINAAsia Division HeadquartersMartin Sprocket & Gear (Shanghai) Co., Ltd.81 Tang Yao Road, Hua Ting Town, Jiading District,Shanghai 201816, P. R. ChinaTel.: 86-021-67084888 Fax: 86-021-67084889

Changzhou • Fuzhou • WuhanZhongshan •Tianjin • Harbin

PEOPLE: When you call Martin you get a person, not voice mail. We are ready, able and willing to help...Now!

SERVICE: Martin ships rebores and other alterations within hours - not days...MTO’s in days - not weeks.

INVENTORY: Martin delivers with incredible fill rates from one of its many facilities strategically located across North America.

Typical Martin Products found in the Oil & Gas Industry


typical martin products found in the oil & gas industry brochures/oil-field...of mud pumps,...

Documents