739650

2
7/30/2019 739650 http://slidepdf.com/reader/full/739650 1/2 Kathrein Inc., Scala Division Post Oce Box 4580 Medord, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991 Email: communications@kathr ein.com Interne t: www.kathrein-sc ala.com  739 650 88° Panel Antenna Kathrein’s X-polarized antennas are designed or use in digital polarization diversity systems. • X-polarized (+45° and -45°). • UV resistant pulltruded radomes. • Wideband vector dipole technology. • DC Grounded metallic parts or impulse suppression. • Downtilt options. 10306-E 936.2360/a Specifcations : Frequency range 806–960 MHz Gain 2 x 16.5 dBd (806–880 MHz) 2 x 16.7 dBd (880–960 MHz) Impedance 50 ohms VSWR < 1.5:1 Intermodulation (2x20w) IM3: -150dBc Front-to-back ratio >25 dB (co-polar) Maximum input power 2 x 600 watts (at 50°C) Polarization +45° and -45° ±45° polarization 85 degrees (hal-power) (806–960 MHz) horizontal beamwidth 88 degrees (hal-power) (806–960 MHz) ±45° polarization 8.5 degrees (hal-power) (806–880 MHz) vertical beamwidth 8 degrees (hal-power) (880–960 MHz) Sidelobe suppression or > 18 dB rst sidelobe above horizon Electrical downtilt 0 degrees Connector 2 x 7/16 DIN emale Isolation >32 dB Weight 49.8 lb (22.6 kg) Dimensions 101.6 x 10.3 x 4.6 inches (2580 x 262 x 116 mm) Equivalent fat plate area 9.61 t 2 (0.893 m 2 ) Wind survival rating 120 mph (200 kph) Shipping dimensions 106 x 11.3 x 6.5 inches (2692 x 287 x 165 mm) Shipping weight 57.3 lb (26 kg) Mounting Fixed mount options are available or 2 to 4.6 inch (50 to 115 mm) OD masts. See reverse for order information. * Mechanical design is based on environmental conditions as stipulated in EIA- 222-F (June 1996) and/or ETS 300 019-1-4 which incl ude the static mechanical load imposed on an anten na by wind at maximum velocity. See the Engineerin g Section o the catalog or urther details. Horizontal pattern ±45°- polarization Vertical pattern ±45°- polarization

Upload: luciano-motta

Post on 14-Apr-2018

240 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 739650

7/30/2019 739650

http://slidepdf.com/reader/full/739650 1/2

Kathrein Inc., Scala Division Post Oce Box 4580 Medord, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991Email: [email protected] Internet: www.kathrein-scala.com

  739 650

88° Panel Antenna

Kathrein’s X-polarized antennas are designed or use in digital

polarization diversity systems.

• X-polarized (+45° and -45°).

• UV resistant pulltruded radomes.

• Wideband vector dipole technology.

• DC Grounded metallic parts or impulse suppression.

• Downtilt options.

10306-E936.2360/a

Specifcations:

Frequency range 806–960 MHz

Gain 2 x 16.5 dBd (806–880 MHz)2 x 16.7 dBd (880–960 MHz)

Impedance 50 ohms

VSWR < 1.5:1

Intermodulation (2x20w) IM3: -150dBcFront-to-back ratio >25 dB (co-polar)

Maximum input power 2 x 600 watts (at 50°C)

Polarization +45° and -45°

±45° polarization 85 degrees (hal-power) (806–960 MHz)horizontal beamwidth 88 degrees (hal-power) (806–960 MHz)

±45° polarization 8.5 degrees (hal-power) (806–880 MHz)vertical beamwidth 8 degrees (hal-power) (880–960 MHz)

Sidelobe suppression or > 18 dBrst sidelobe above horizon

Electrical downtilt 0 degrees

Connector 2 x 7/16 DIN emale

Isolation >32 dB

Weight 49.8 lb (22.6 kg)

Dimensions 101.6 x 10.3 x 4.6 inches(2580 x 262 x 116 mm)

Equivalent fat plate area 9.61 t2 (0.893 m2)

Wind survival rating 120 mph (200 kph)

Shipping dimensions 106 x 11.3 x 6.5 inches(2692 x 287 x 165 mm)

Shipping weight 57.3 lb (26 kg)

Mounting Fixed mount options are available or2 to 4.6 inch (50 to 115 mm) OD masts.

See reverse for order information.

* Mechanical design is based on environmental conditions as stipulated in EIA-222-F (June 1996) and/or ETS 300 019-1-4 which include the static mechanicalload imposed on an antenna by wind at maximum velocity. See the EngineeringSection o the catalog or urther details.

Horizontal pattern±45°- polarization

Vertical pattern±45°- polarization

Page 2: 739650

7/30/2019 739650

http://slidepdf.com/reader/full/739650 2/2

All specications are subject to change without notice. The latest specications are available at www.kathrein-scala.com.

Kathrein Inc., Scala Division Post Oce Box 4580 Medord, OR 97501 (USA) Phone: (541) 779-6500 Fax: (541) 779-3991Email: [email protected] Internet: www.kathrein-scala.com

Mounting Options:

Model Description

2 x 738 546 Mounting Kit or 2 to 4.6 inch(50 to 115 mm) OD mast.

742 033 Three-panel Sector Mounting Kit(120 deg. ea.) or 4.5 inch(114.3 mm) OD mast.

742 034 Three-panel Sector Mounting Kit(120 deg. ea.) or 5.5 inch(139.7 mm) OD mast.

737 978 Tilt Mount Kit0–7.5 degrees downtilt angle.

739 650

88° Panel Antenna

Order Inormation:

Model Description

739 650 Antenna with 7/16 DIN connectors0° electrical downtilt

2 x 738 546 Mounting Kit

10.3 inches

(262 mm)

105.3 inches

(2674 mm)

101.6 inches(2580 mm)

103.7 inches

(2634 mm)

4.6 inches

(116 mm)

2.625 inches ± 0.125(68 mm ± 4)

35 mmM6

64 mmM8