מדפסת תלת מימד ענקית projet 5000

ProJet™ 5000 Professional 3D PrintersThe Best Gets Even Better!

www.printin3d.com | NYSE: DDD

NEW For 2012

Professional 3D Printers - 2012

ModelsModels PrototypesPrototypes Form-FitForm-Fit Rapid ToolingRapid Tooling MoldsMolds Casting PatternsCasting Patterns

2

AccurateAccurate PrecisePrecise Fine DetailsFine Details High CapacityHigh Capacity EconomicalEconomicalFunctional MaterialsFunctional Materials

Introducing The New ProJet™ 5000

3

• New higher resolution, higher-throughput print head

• Up to 750 x 750 x 890 DPI• Highest X/Y print resolution in 3D jet-printing

• Super sharp features• Micro-fine details

• More jets, increased throughput

• New High Speed build mode• Up to 2X faster build speed• Great for fast mockups & prototypes• 64 µ (0.0025 in.) Z-layer

ProJet™ 5000 Value

4

• Largest 3D Printer Build Size in its classLargest 3D Printer Build Size in its class• Highest print resolution in its class• Three build modes (HD/UHD/HS)• Huge build-size:

21.65 x 15.5 x 11.8 in. (550 x 393 x 300 mm)

• High accuracy & precision• Tough VisiJet® MX plastic w/ 20% elongation (flex)• Easy melt-away wax VisiJet® S300 supports • Exclusive 5-year Print-Head warranty• Remote email notification convenience• Most Affordable (cost/build-size)

Best-in-class material performance

Best-in-class edge & corner definition

Remarkable feature resolution

Unmatched surface smoothness

Exceptional sidewall quality

Best-in-class accuracy & precision

Printability… Parts That Match Your Design Intent

ProJet™ 5000: Larger Parts, More Parts, Awesome Parts!

6

Finest Detail Resolution

Features down to 0.01 inches (0.25mm)

No stair-stepping on curved sidewalls

Micro-fine features; razor-sharp definition

Fast, hands-free support removal

Part stacking & nesting

Quick job turn-around

High throughput capacity

Fast, easy job submission

Printability…Maximum Thru-put, Minimum Effort & Time

Fast, Easy Support Removal

• Wax supports simply melt away with no support scars• Hands-free process saves time and labor• Entire build platform of parts processed together – saves more time• No geometry limitations – wax melts out of inaccessible internal cavities• No physical force exerted on part that could damage delicate features• No chemicals required• Wax supports are inert, no special disposal required• No facilities requirement for water inlet or drain

Save Money by Using 15%-25% Less Material

• 3D Systems’ patented and proprietary Multi-Jet Modeling technology (MJM) has better print material yield and less waste

• No mixing of more expensive build material together with lower cost support material to form supports like other ink-jet style 3D printers

• No routine manual print head purging like other ink-jet style 3D printers reduces waste

• “No-force” support removal reduces damage requiring re-prints

Molten drop of material is jetted from printhead

Wax component causes drop to freeze upon contact remaining in place until curing takes place – better droplet control, less planarization (less waste)

Phase Change Materials

Affordable service plans

Highly trained local service technicians

Minimum maintenance

Extended print head warranties

Material efficient

Printability… Economical To Own & Operate

ProJetTM Print Heads Last…Guaranteed!

• ProJet™ printers have one “wide-pass” heavy-duty print head

• ProJet™ print heads don’t wear out like other ink-jet style 3D printers

• Save up to $20,000 or more over 5 years in print head replacements

Year# PHs

replaced Cost1 4 $4,000 2 4 $4,000 3 4 $4,000 4 4 $4,000 5 4 $4,000

Total 20 $20,000

Other Ink-jet 3D Printers

Precision

Performance

Productivity

ProJet™ Printability Can You Afford To Settle For Anything Less?

www.3dsystems.com NYSE: DDD

Thank YouThank You