ramsposterjorge

•Understanding how a materials microstructure changes as a result of fatigue and high temperatures is important to designing with new ultra strong materials. [1]

•This study is on the implementation and modification of a lamp furnace for in-situ materials testing.

•Neutron beam is an ideal candidate for observation of change in micro structure. [2]

• The Installation of lamp furnace on load frame

• Thermal analysis using finite element analysis

• High temperature test on sample specimen

• Redesign of insulation for reduced beam interference.

• Positioning lamp furnace considerations:

No interference with operation of test stand

Effective heating of test specimen

• Thermal analysis

CAD model of test set up using solidworks

Thermal analysis of model using Ansys

• High temperature test

Record and compare result with model analysis

• Redesign of furnace insulation

Reduced interference with neutron beam

Easy of fabrication and installation

Test sample with thermal couple attached

Insulation

Heating Element

Beam Direction

Sample Rotation

Water Cooled Sample Grip

3 axis mounting bracket

Wire Mesh Thermal Analysis

Original New

Benefits:• Easier fabrication• Easier installation• Increased height for decreased beam interference

• Optimal installation position found• Thermal analysis and high temperature test

was preformed• Temperature fluctuations were with in an

acceptable range for in-situ testing• Comparison showed >1% difference between

center measurements and >2% difference between side measurements

• Redesign of insulation completed•Easier fabrication and installation•Reduced beam interference

• Profiling of furnace interference during neutron beam test

• Submit beam line time proposal for high temperature test

• Perform in-situ test

1. M. Yashima, “In situ Observations of Phase Transition Using High-Temperature Neutron and Synchrotron X-Ray Powder Diffractometry,” J.

Am. Ceram. Soc., vol. 85, no. 12, pp. 2925–2930, 2002.

2. M. A. Krivoglaz and O. A. Glebov, Diffuse Scattering of X-Rays and Neutrons by Fluctuations, Softcover reprint of the original 1st ed. 1996

edition. Springer, 2011.

The Research Alliance in Math and Science program is sponsored by the Office of Advanced Scientific Computing Research, U.S. Department of Energy. The work performed at the Oak Ridge National Laboratory, which is managed by UT-Battelle, LLC under Contract De-AC05-00OR22725. This work has been authored by a contractor of the U.S. Government, accordingly, the U.S. Government, retains a nonexclusive, royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for U.S. Government purposes.

Research Alliance in Math and ScienceSNS Vulcan Beam line Team

Mentor: Ke An

Jorge Cisneros Email: jscisneros@gmail.comWayne State University

0

200

400

600

800

1000

1200

0 200 400 600 800 1000 1200

Tem

pe

ratu

re (

oC

)

Set Point (oC)

Furnace Measured vs. Predicted Temperature

Measured Center

Predicted Center

Measured Side

Predicted Side