8/3/2019 EE200

1/2

1

EE 200 Electrical Workshop Lab

Course Incharge: Dr. Shahid Masud

Lab Instructors: Adnan Munawar& Salman Manzoor Office: EE Projects Lab

Email: adnan.munawar@lums.edu.pk; salman.manzoor@lums.edu.pkTel: 4136

Office Hours: Shall be announced separately Credits: 1 Semester: Fall 2011-12

Course Description:

This is a core course for Electrical Engineering students. The scope of this course

covers five different modules that are designed to make the students familiar with

different mechanical and electrical modeling softwares along with carefully compiledassignments and home works to further enhance their practical skills. In addition to this,

the subject also consists of modules of machining, electric wiring and smart panels design

that reflect good aesthetic sense. CoCreate modeling software and ExpressPCB will be

used for making mechanical models and electronic layouts respectively that would helpthe students design and build their own projects. There is an added element of visual

perspective analysis, to teach the students to deal with 2D and 3D elements in CAD.

Furthermore, a small portion of Introduction to Robotics is added to familiarize thestudents with the basis for Mechanical and Robotics assembly.

Course Status:

Core course for Electrical Engineering major

Elective course for other undergraduate students

Pre-requisites:

None

Suggested Text Books:

Lecture slides and Relevant material shall be provided in the form of

handouts when needed.

Grading Scheme:

This is a PASS / FAIL course PASS grade on obtaining 67% marks overall Each module carries some weight as noted along side. Quizzes are held in Drawing and modeling. 8-tasks weight is 80% overall 3-quizzes weight is 20% overall

Lectures and Examinations:Weekly lab sessions of 100 minutes duration.

8/3/2019 EE200

2/2

2

Due to the practical nature of this course, attendance of 75% is required to pass.

Lecture Topics / Tasks:

Lecture /

Week

Course Lecture Topics Location

Module 1 (2 tasks and 1 quiz)1 / Wk 1 Basic tutorial to familiarize the students with the CoCreate

softwares environment, introduction to links in a mechanicalchain and definition of transformations in the perspective of

robotics.

IST Lab-4

2 / Wk 2 Further exploring a little advanced operations of the softwareand moving forward with transformations.

IST Lab-4

3 / Wk 3 Tutorial on pattern creation, object repetition, parent object tochild object discussions and familiarization to Denavit

Hartenberg parameters for understanding of mechanisms.

IST Lab-4

4 / Wk 4 Tutorial on mechanical assemblies, exploded analysis,

configuration development, relative mobility of configurationsand application of the concepts learned related to robotics.

IST Lab-4

Module 2 (2 tasks)

5 / Wk 5 Learning Express PCB software IST Lab-4

6 / Wk 6 Tutorial on etching, soldering and drilling IST Lab-4

/ EE P. Lab

7 / Wk 7 Project:1 of Power supply IST Lab-4

/ EE P. Lab

8 / Wk 8 Project:2 Based on Digital circuit design IST Lab-4 /

EE P. Lab

Module 3 (2 tasks and 1 quiz)

9 / Wk 9 Basic machining tutorial with demonstrations of cutting,

facing, drilling of a Job on Lathe Machine

EE P. Lab

10 / Wk 10 Second demonstration on machining with a task for students EE P. Lab

Module 4 (1 task)

11/ Wk 11 First tutorial on electric wiring EE P. Lab

12 / Wk 12 Second tutorial on electric wiring EE P. Lab

Module 5 (1 task followed by the final quiz)

13 / Wk 13 First tutorial on Smart panel fabrication, drilling, filing etc. EE P. Lab

14 / Wk 14 Second tutorial on Smart panel fabrication. EE P. Lab