student handbook 2013-2014 - ap.cityu.edu.hk material/bsap student handbook 2013.pdf · 4 prof c s...
TRANSCRIPT
Student Handbook
2013-2014
College of Science and Engineering 科學及工程學院
Department of Physics and Materials Science
物理及材料科學系
Bachelor of Science (Hons) in Applied Physics
應用物理學榮譽理學士
TABLE OF CONTENTS
Page
Introduction
1
The Department of Physics and Materials Science
1
Members of Staff, with Areas of Specialism
3
Bachelor of Science (Honours) in Applied Physics
Major Leader 10
Major Aims and Features 10
Career Prospects 11
Maximum Period of Study 12
Assessment and Progression 12
Late Submission of Assessment Tasks 13
Award Classification 13
Late Drop 14
Communication Channels 14
Major Structure and List of Courses offered in Academic Year 2013/14 15
Photonics Stream 22
Nuclear Environmental Physics Stream 23
Materials Physics Stream 24
Biomedical Physics Stream 25
General (no streaming) 25
Prerequisites and Precursors 26
Recommended Study Plan 26
Brief Course Description 28
Detailed Course Description 36
August 2013
1
Introduction
This Handbook contains important and useful information for students enrolled in
the Bachelor of Science (Hons) in Applied Physics Major. Students are advised to
study this handbook carefully so as to familiarize themselves with the curriculum
requirements. It is, however, intended to be read in conjunction with other official
documents/information published by the City University of Hong Kong.
The Department of Physics and Materials Science
The world of science and technology in the new millennium is facing scientific
challenges in the areas of Information Technology, Biotechnology, Nanotechnology,
Energy and Environmental Science. In all these endeavors, materials issues are
ubiquitous and the understanding of the underpinning physics is essential.
Recognising the importance of these frontier challenges as well as the need for a
synergism between education and research encompassing both physics and
materials, the Department of Physics and Materials Science, the first of its kind in
Hong Kong, was established in 1993. The Department’s objectives are threefold: to
educate students with advanced knowledge and skills; to conduct cutting-edge
research and development leading to the advancement of science and technology ;
and to render professional services for Hong Kong and the Greater China region.
Over a ten-year period, the Department has grown to a current size of 29 academic
staff (including 6 Chair Professors, 8 Professors, 5 Associate Professors and 10
Assistant Professors), 110 research staff as well as around 30 administrative and
technical staff. The Department is currently offering two undergraduate majors: BSc
(Hons) in Applied Physics and BEng (Hons) in Materials Engineering. For
postgraduate studies, we are offering a taught Master of Science (MSc) degree in
Materials Engineering and Nanotechnology as well as research degree programmes
for Master of Philosophy (MPhil) and Doctor of Philosophy (PhD). Members of our
academic staff are recognized in their professional societies. Their honours include
Fellows in the American Physical Society, Institute of Physics (UK), Institute of
Electrical and Electronics Engineers, Institute of Materials, Minerals and Mining
(UK), Hong Kong Institution of Engineers, and editors of leading international
journals.
In response to the rapid advances in scientific knowledge and technologies, we
maintain a high standard and a dynamic research team encompassing both applied
and basic research activities. The Department excels in research over a wide range
of specialties given its long established collaborations with the global scientific
communities including the Mainland China, the USA, Japan, Australia and various
European countries. Our current research areas include: applied optics,
environmental physics, computational materials science, surface science and
engineering, functional materials and coatings, electroceramics, metals and alloys,
2
polymer composites, electronic materials, magnetism and spintronics,
superconductivity, plasma engineering, biomaterials, optoelectronics, photonics,
smart materials, instrumentation and measurements, medical radiation physics,
nanoscience and technology, nano-scale devices, molecular and bio-electronics,
organic light emitting devices, shape memory alloys.
In the past five years, our research support totalled about HK$145 million from
external grants (including matching funds) in addition to about HK$93 million from
internal sources. Our academic staff has published more than 1500 technical papers
in internationally refereed journals and delivered approximately 500 invited talks
and conference presentations during the same period. Several outstanding research
awards and recognitions have been granted to our staff such as IEEE/NPSS Merit
Award, Friedrich Wilhelm Bessel Research Award, Fellowship of the American
Physical Society, ASM International, AVS, IEEE, HKIE and the Institution of
Mechanical Engineers. Our academic staff is professionally active through
editorships of about thirty international journals, organization of a number of
international conferences or symposia, contributions to committee functions in a
number of local and international organizations and societies.
With well-equipped laboratories, sound curriculum degrees and advanced multi-
media education facilities, the devoted staff of the Department of Physics and
Materials Science welcomes the new challenges and is ready to bring state-of-the-art
education to all students joining our family.
3
Members of Staff, with Areas of Specialism
STAFF AREAS OF SPECIALISM
Head of Department and Chair Professor
of Physics
Prof X L Wang
BSc Peking University, China
PhD Iowa State University, USA
Fellow, American Physical Society
Email : [email protected]
(for departmental matters)
Neutron and synchrotron scattering
Phase transformation, deformation,
magnetism, residual stress determination
Metallic glasses, nanostructured
materials, magnetic shape memory
alloys
Personal Secretary
Ms Sare W Y Lau
Email : [email protected]
Chair Professor of Materials Engineering
Prof Paul K Chu
BSc The Ohio State University, USA
MSc PhD Cornell University, USA
Fellow, American Vacuum Society
Fellow, Institute of Electrical and
Electronics Engineers
Fellow, American Physical Society
Fellow, Hong Kong Institution of
Engineers
Email : [email protected]
Plasma science, implantation,
processing and engineering
Semiconductor materials and processing
Biomedical materials and nanobiology
Advanced materials, functional thin
films, and nanomaterials
Chair Professors of Materials Science
Prof Joseph K L Lai
BA MA Oxford University, UK
PhD City University, UK
Fellow, Institute of Materials, Minerals
and Mining, UK
Chartered Engineer, UK
Fellow, Institute of Physics, UK
Chartered Physicist, UK
Fellow, Institution of Mechanical
Engineers, UK
Fellow, Hong Kong Institution of
Engineers
Email : [email protected]
Properties of steels and aluminium
Failure analysis of engineering
components
Temperature measurement
Expert witness on accident
investigations
Litigations and arbitrations involving
metals
4
Prof C S Lee
BSc(Eng) PhD University of Hong Kong
Email : [email protected]
Organic electronics
Nanoscaled materials
Solar cells and photodetectors
Chair Professor of Nuclear Engineering
Prof C H Woo
BSc (Special Honours) University of
Hong Kong
MSc University of Calgary, Canada
PhD University of Waterloo, Canada
DSc University of Hong Kong
Fellow, Hong Kong Institution of
Engineers
Email : [email protected]
Nuclear Materials
Reactor aging due to irradiation damage
Chair Professor of Photonics Materials
Prof Andrey L Rogach
Diploma Belarusian State University,
Belarus
PhD Belarusian State University, Belarus
Dr habil Ludwig-Maximilians University,
Munich, Germany
Email : [email protected]
Nanoscience and nanotechnology
Advanced functional materials
Optical spectroscopy
Professor and Associate Dean (CSE)
Prof Robert K Y Li
BA BAI MA PhD Dublin University,
Ireland
Email : [email protected]
Polymer engineering
Composite materials
Professor and Assistant Dean (CSE)
Prof C H Shek
BSc(Eng) PhD University of Hong Kong
Email : [email protected]
Phase transformation in metallic materials
Nanostructured materials
Bulk metallic glasses
Professors
Prof K S Chan
BSc PhD University of Hong Kong
Email : [email protected]
Semiconductor physics
Photonics technology
Nanoscience and nanotechnology
Spintronics
Superconductivity
5
Prof S C Tjong
BSc National Taiwan University, Taiwan
MSc PhD University of Manchester, UK
Chartered Engineer, UK
Chartered Scientist, UK
Fellow, Institute of Materials, Minerals
and Mining, UK
Fellow, Hong Kong Institution of
Engineers
Email : [email protected]
Surface science
Electron microscopy
Polymer composites
Biomaterials
Nanostructured materials
Prof Lawrence C M Wu
BSc(Eng) PhD University of Bristol, UK
PgDMS University of West of England,
UK
Fellow, Hong Kong Institution of
Engineers
Email : [email protected]
Engineering failure analysis
Lead-free interconnections
Nano-materials for solar cells and
biosensors
Prof Peter K N Yu
BSc PhD University of Hong Kong
Chartered Scientist, UK
Chartered Physicist, UK
Fellow, Institute of Physics, UK
Chartered Radiation Protection
Professional
Member, Society of Radiological
Protection, UK
Fellow, Hong Kong Institution of
Engineers
Email : [email protected]
Radiation biophysics
Medical physics
Biointerfaces
Prof R Q Zhang
BSc MSc PhD Shandong University,
China
Email : [email protected]
Surface, interface and microstructures of
functional materials
Vapor-solid interactions
Computational materials science
Nanoscience
Prof W J Zhang
BSc MSc PhD Lanzhou University, China
Email : [email protected]
Surface and interface analysis
Thin films
Diamond and superhard materials
Nanomaterials
6
Associate Professors
Dr S T Chu
BSc Wilfrid Laurier University, Canada
MSc PhD University of Waterloo,
Canada
Integrated photonics
Sensors and sensing systems
Numerical methods
Dr C Y Chung
BSc(Eng) PhD University of Hong Kong
Member, Hong Kong Institution of
Engineers (Materials & Biomedical)
Email : [email protected]
Metallic materials
Shape memory alloy
Powder metallurgy
Battery materials
Dr A L Roy Vellaisamy
BSc St Xavier’s College, India
MSc Loyola College, India
PhD Nagpur University, India
Email : [email protected]
Molecular electronics
Molecular self-assembly
Photonics
Nano-materials science
Bio-electronics
Renewable energy (solar and fuel cells)
and printed electronics
Dr Z K Xu
BSc Shanghai University of Science and
Technology, China
MSc California State Polytechnic
University at Pomona, USA
PhD University of Illinois at Urbana-
Champaign, USA
Email : [email protected]
Electron microscopy
Materials characterization
Processing of advanced materials
Electroceramics
Dr J Antonio Zapien
BSc UNAM, Mexico
PhD The Pennsylvania State University,
USA
Email : [email protected]
Nanomaterials and nanotechonology
Nano-photonics and nano-optoelectronics
Optical properties of materials
Nucleation and growth of thin films
Assistant Professors
Dr X F Chen
BEng Xi’an Jiaotong University, China
MSc National University of Singapore
DPhil University of Oxford, UK
Email: [email protected]
Nanomaterials, biomedical materials,
medical engineering
7
Dr Jun Fan
BEng Tsinghua University, Beijing,
China
MSc McMaster University, Hamilton,
Canada
PhD Princeton University, Princeton,
USA
Email: [email protected]
Theoretical and computational materials
science and biophysics
Assembly molecular self-assembly
Structure, function and dynamics of cell
membranes and proteins
Molecular dynamics simulations
Phase field modeling
Free energy calculations
Dr Johnny C Y Ho
BSc MSc PhD University of California,
Berkeley, USA
Email: [email protected]
Synthesis and characterization of nano-
structured materials
Assembly and heterogeneous integration
of nano-materials
Nano-scale devices and processing for
technological applications (electronics,
energy-harvesting, photonics, sensors)
Dr Y Y Li
BSc Peking University, China
MSc PhD University of California, San
Diego, USA
Email : [email protected]
Electrochemical nanofabrication
Functional porous nanomaterials
Sensors
Electrode materials
Smart biomaterials
Dr Antonio Ruotolo
MEng PhD University of Naples (IT)
“Federico II”, Italy
Email : [email protected]
Magnetism and spintronics
Superconductivity
Semiconductor oxides
Thin film technology
Nano-lithography
Dr Suresh M Chathoth
MSc Andhra University, India
MPhil University of Madras, India
MTech National Institute of Technology
Karnataka, India
PhD Technical University of Munich,
Germany
Email : [email protected]
Neutron scattering
Dynamics of liquid in confinements
Energy storage
Glass transition
Dr Feng Wang
BEng PhD Zhejiang University, China
Email : [email protected]
Luminescent nanomaterials
Photon upconversion
Optical spectroscopy
Dr Chunyi Zhi
BSc ShanDong University, China
PhD IOP, CAS, China
Email : [email protected]
BN/BCN nanomaterials
Thermally conductive electrically
insulating polymer composites for heat
dissipation
Energy related electrochemical &
photoelectrochemical devices
Nanomaterials for sewage treatment
8
Emeritus Professor
Prof Czeslaw Z Rudowicz
Institute of Physics,
West Pomeranian University of
Technology, Poland
Quantum mechanics
Condensed matter physics
Magnetism
Electron magnetic resonance
Crystal (Ligand) field theory
Computational physics
Scientific databases
Honorary Professors
Prof Jack C M Chang
Organic nanomaterials and devices
Prof Nathan W T Cheung
Professor Emeritus, Department of
Electrical Engineering and Computer
Sciences, University of California,
Berkeley, USA
Microelectronics technologies
Surface science and nanoscience
LED and photovoltaic
Prof Y W Mai
Center for Advanced Materials,
Technology, School of Aerospace
Mechanical and Mechatronic
Engineering, University of Sydney,
Australia
Advanced engineering materials
including bio, nano and functionally
graded materials
Fracture and fatigue mechanics
Fiber composites science and technology
Tribology and surface engineering
Failure mechanics and analysis
Adjunct Professors
Prof Yeshayahu Lifshitz
Materials Engineering Dept,
Technion – Israel Institute of
Technology, Israel
Silicon and other semiconducting
nanowires
Ion-beam structuring of materials
Diamond and diamond like carbon and
related materials
Ion interactions with materials
Space environmental effects on materials
Electronic devices and systems
Prof L J Wan
Professor of Chemistry,
Director, Institute of Chemistry,
Chinese Academy of Sciences
Nanoscience and technology
Molecular assembly and device
Materials chemistry
Electrochemistry
Scanning probe microscopy
Laboratory Manager
Dr Dan D S Chiu
BSc Chinese University of Hong Kong
MSc PhD University of Akron, USA
Email : [email protected]
9
Chief Technical Officer
Mr T S Poon
Email : [email protected]
Executive Officer I
Ms Jenifer P Y Tam
Email : [email protected]
Clerical Officer II
Ms Amy T Y Leung
Email : [email protected]
Ms Carmille K L Ng
Email : [email protected]
Ms Corrie Y P Pang Email : [email protected]
Ms Kathy K P Yu
Email : [email protected]
Clerical Assistant
Ms Mimi M Y Tsou
Email : [email protected]
10
BSc (Honours) in Applied Physics
Major Leader
Major Leader : Prof K S Chan
Deputy Major Leader : Dr J Antonio Zapien
Major Aims and Features
Applied physics adapts and utilizes physics principles for a multitude of scientific
and technological applications. Its scope of study therefore overlaps with other
scientific and engineering disciplines (e.g., materials science, environmental
science, biomedical science and engineering, electronics, mechanical and
manufacturing engineering). In fact, much of modern technology and its advances
owe its existence to applied physics.
Graduates with a degree in applied physics possess a unique qualification. They not
only have a fundamental understanding of physics principles but also are trained in
applying these principles to various fields with particular emphasis on problem-
solving research and development. Thus, graduates generally need less time to
integrate themselves into future jobs, and adapt well to technological changes.
Elective courses in the BSc in Applied Physics are concentrated in four streams:
(1)Nuclear Environmental Physics, (2)Photonics, (3)Materials Physics, and
(4)Biomedical Physics. Nuclear Environmental Physics Stream equips students
with knowledge in Nuclear Physics, Energy and Environment. Photonics Stream
prepares students with the basic knowledge of optics, photonic materials, optical
spectroscopy, lasers and opto-electronics. Materials Physics Stream equips students
with knowledge in materials testing and characterization, microelectronic
materials, thin film technology and nanocrystalline coatings. Biomedical Physics
Stream prepares students with knowledge in medical physics, radiation biophysics
and dosimetry. Students are free to choose any combination of courses in the above
four streams.
Students are trained to develop the ability to use the most effective instrumentation
and evaluation techniques for scientific and industrial applications, as well as to
examine critically the data collection methodology and the resulting data. Students
will also receive relevant industrial training and workshop practice, particularly
with regard to engineering design.
Final-year students are required to work independently on a project in a selected
area. These projects are designed to help students integrate their knowledge to
solve challenging problems. Projects may be carried out in conjunction with
11
industries or government agencies, thus facilitating their job seeking upon
graduation.
Career Prospects
Traditionally, in Hong Kong, most physics graduates have either become teachers,
pursued further study or taken up careers in various government departments and
agencies. Graduates in applied physics have the distinct advantage that they can
also pursue careers in industry and business sectors. Examples are:
Industry/Business
• Electronic components manufacturing (e.g., printed circuit boards, liquid crystal
displays)
• Environmental consultancy
• Instrumentation (e.g., scientific instruments and applications)
• Optics-related industries
• Semiconductor manufacturing (e.g., integrated-circuits process technology)
• Biomedical equipment and products manufacturing
• Testing laboratories
Government departments and agencies
• Environmental Protection Department
• Hong Kong Observatory
• Hospital Authority
• Department of Health
12
Maximum Period of Study
Students shall complete the degree and major requirements within the stipulated
maximum period of study (i.e. 8 years for Normative 4-year degree, 6 years for
Advanced Standing I, and 5 years for Advanced Standing II), inclusive of any
change of majors, periods of leave of absence and suspension of studies. The
maximum period of study for individual double degrees shall be stipulated by the
cognizant academic units.
Assessment and Progression
Students are assessed through a variety of methods, creating ample opportunity to
demonstrate their abilities. The means of assessment vary from course to course but
typically include coursework as well as the more traditional written examinations.
Coursework consists of written assignments, computer simulations, tutorials,
project, laboratory reports and presentations. Examinations are held at the end of
each course.
With effect from September 2003, a student has to obtain at least 30% of the
maximum marks in the final examination in order to pass a course (i.e., D or
above) where there is an examination component in the assessment.
When a student’s Semester Grade Point Average (SGPA) or Cumulative Grade
Point Average (CGPA) falls below 1.7, he/she will be considered as having
academic difficulties. The student should then consult the Tutor or Major Leader
for advice. If the CGPA is too low, the College Examination Board may terminate
the student’s study.
Calculation of Grade Point Average:
Semester Grade Point Average (SGPA) The GPA calculated for all the courses
taken in one semester, including failed
courses, but excluding courses graded I,
X or P.
Cumulative Grade Point Average (CGPA)
n
i
i
n
i
ii
U
UG
CGPA
1
1
Where G is the grade point awarded
and U the credit units earned for the ith
course.
13
A student who believes that his/her ability to attend an examination, or in-course
assessment with a weighting of 20% or above, has been adversely affected by circumstances beyond his/her control may submit a mitigation request with the
relevant supporting documents (e.g. medical certificate) to the Department by
completing a Form for Reporting Extenuating Circumstances Affecting
Assessment (which can be downloaded from the University website). It is the
student’s responsibility to hand in all the required documents as soon as possible
and no later than 5 working days from the scheduled date for completing the
affected examination or assessment.
Upon receipt of a mitigation request, the Department will investigate the case, in
consultation with the course-offering academic unit (if appropriate). Only
compelling reasons such as illness, hospitalization, accident, family bereavement or
other unforeseeable serious circumstances will be considered. If the case is
substantiated, the Assessment Panel will then decide if a make-up examination or
coursework or other alternative assessment will be offered to the student concerned.
Only one make-up examination will be arranged per course per semester.
Late Submission of Assessment Tasks
20% of the marks obtained by the student will be deducted each day linearly for
late submission of assessment tasks across the Department.
Award Classification
Students who enrolled in or after 2010/11 will follow the following award
boundaries starting from 2010-11.
1
st Class
CGPA ≥ 3.50
2nd
Upper
CGPA 3.00-3.49
2nd
Lower
CGPA 2.50-2.99
3rd
Class
CGPA 2.00-2.49
Pass
CGPA 1.70-1.99
14
Late Drop
The department will not process any late drop (except for extenuating
circumstances) after week 8. Academic reason will NOT be considered as a valid
reason. For Summer Term, the deadline for a late drop is the end of week 4.
Communication Channels
There are various channels of communication between students and the Department.
On an informal basis, students having academic difficulties with a course are
encouraged to approach the lecturer or tutor concerned. Tutors are also available for
students having general academic problems.
A formal consultative process between students and staff exists in the Department
in the form of a Joint Staff/Student Consultative Committee (JSSCC), to which two
student representatives from each cohort of each mode will be nominated. The
Committee meets at least once a semester. During the meeting, discussions are
confined to matters of a general academic nature and the welfare of students.
Students can express their views on the content and organization of the programme
and identify any areas of difficulty.
Besides the JSSCC, students are also represented in the Programme Committee. One
student representative from each programme cohort will be elected as member of the
Committee. The Programme Committee meets at least once a semester and is
charged with the responsibility of monitoring the operation and performance of the
programme.
15
Major Structure and List of Courses offered in Academic Year 2013/14
To complete BSc (Hons) in Applied Physics and earn the award, students must
complete the major requirement described below in addition to the degree
requirement in Gateway Education, College Requirement and Free Electives.
Normative 4-year degree (Minimum credit units for
graduation: 120;
Maximum credit units permitted
for students: 144)
Advanced Standing I (Note 1) (Minimum credit units for
graduation: 90;
Maximum credit units permitted for
students: 114)
Advanced Standing II
(Senior-year Entry) (Note 2) (Minimum credit units for
graduation: 60;
Maximum credit units permitted for
students: 84)
120
Gateway Education: 30
College Requirement: 15
Major Requirement (Core +
Elective): 57 (33+24/ 36+21/
39+18)
Free Elective: 18
90
Gateway Education: 21
College Requirement: 9
Major Requirement (Core +
Elective): 57 (33+24/ 36+21/
39+18)
Free Elective: 3
66
Gateway Education: 12
College Requirement: Waived
Major Requirement (Core +
Elective): 54 (30+24/ 33+21/
36+18)
Free Elective: 0
For students admitted to the Major in Academic Year 2013/14
Degree Requirement
1. Gateway Education
(Please refer to http://www.cityu.edu.hk/edge/ge/ge_requirements.htm.)
Normative 4-year
Degree
Advanced
Standing I (Note 1)
Advanced
Standing II
(Senior-year
Entry) (Note 2)
English (Senate/68/A4R) 6 credit units 6 credit units 3 credit units
Chinese Civilisation – History
and Philosophy 3 credit units 3 credit units
Not compulsory
requirement
Area requirements: A minimum of
3 credit units from each of the
three areas below:
Area 1: Arts and Humanities
Area 2: Study of Societies, Social
and Business Organisations
Area 3: Science and Technology
21 credit units 12 credit units 9 credit units
16
2. Chinese Language Requirement (Senate/70/A5R)
From 2012 cohort onwards, students are required to satisfy the Chinese
Language Requirement as follows:
(i)
Students with an HKDSE score below 4 in
Chinese, or an HKALE AS Chinese Language
and Culture score below D
3-credit unit Chinese
course*
(ii)
Students with an HKDSE score of 4 or above
in Chinese or an HKALE AS Chinese
Language and Culture score D or above, or
those who have successfully completed the 3-
credit unit Chinese course
No requirement
(iii) Students whose qualifications do not fall
within (i) and (ii) above No requirement
*The 3 credit units of the Chinese course will NOT be counted towards the minimum credit
units required for graduation and will NOT be included in the calculation of CGPA.
17
3. College/School Requirement, if any
Students of the College of Science and Engineering are required to earn 15 CU
in fulfillment of the College requirements.
Course Code Course Title Level Credit
Units
Remarks
Normative 4-year Degree
Mathematics (6 credit units)
MA1200 /
MA1300
Calculus and Basic Linear Algebra I /
Enhanced Calculus and Linear Algebra
I
B1 3
MA1201 /
MA1301
Calculus and Basic Linear Algebra II /
Enhanced Calculus and Linear Algebra
II
B1 3
Computing (3 credit units)
CS1102 /
CS1302
Introduction to Computer Studies /
Introduction to Computer Programming B1 3
Science (6 credit units)
Choose two from the following three subject areas:
Physics
AP1201/ General Physics I/ B1 3
Chemistry
BCH1100 Chemistry B1 3
Biology
BCH1200 Discovery in Biology B1 3
Advanced Standing I (Note 1)
College Requirements waived. 6
CS1102 /
CS1302
Introduction to Computer Studies /
Introduction to Computer
Programming
B1 3
MA1201 /
MA1301
Calculus and Basic Linear Algebra II /
Enhanced Calculus and Linear Algebra
II
B1 3 May be exempted subject to passing placement tests or recommendation of MA department.
AP1201 General Physics I B1 3 For cohort 2012/13 only
Students with D or
above in HKAL Physics
will be exempted from
AP1201. They are
required to complete
any course of 3 credits.
Advanced Standing II (Senior-year Entry) (Note 2)
College Requirements waived. 15
18
Major Requirement
1. Core Courses
For Normative 4-year Degree students admitted to the Major in Academic Year
2013/14 and thereafter
Students should COMPLETE and PASS all the following required courses.
(33 or 36 or 39 units)
Course
Code
Course Title Units
Worth
Semester
Offered
Semester
Examined
AP2191 Electricity and
Magnetism
3 A A
AP2212 Measurement and
Instrumentation
3 A A
AP3202 Modern Physics 3 B B
AP3204 Waves and Optics 3 B B
AP3205 Electromagnetism 3 B B
AP3244 Design Laboratory 3 B 100%
coursework
AP3251 Quantum Physics 3 A A
AP3272 Introduction to Solid
State Physics
3 B B
AP3290 Thermodynamics 3 A A
AP4216/
AP4217/
FS4003/@
FS4004*
Project/
Dissertation/
CES Placement Project/
Overseas Research
Internship Scheme
3/
6/
6/
9
A/
AB/
BSA/
B
100%
coursework
MA2158 Linear Algebra and
Calculus
3 A A
For Advanced Standing I students
Students should COMPLETE AND PASS all the following required courses.
(33 or 36 or 39 units)
Course
Code
Course Title Units
Worth
Semester
Offered
Semester
Examined
AP2191 Electricity and
Magnetism
3 A A
AP2212 Measurement and
Instrumentation
3 A A
AP3202 Modern Physics 3 B B
19
Course
Code
Course Title Units
Worth
Semester
Offered
Semester
Examined
AP3204 Waves and Optics 3 B B
AP3205 Electromagnetism 3 B B
AP3244 Design Laboratory 3 B 100%
coursework
AP3251 Quantum Physics 3 A A
AP3272 Introduction to Solid
State Physics
3 B B
AP3290 Thermodynamics 3 A A
AP4216/
AP4217/
FS4003/@
FS4004*
Project/
Dissertation/
CES Placement Project/
Overseas Research
Internship Scheme
3/
6/
6/
9
A/
AB/
BSA/
B
100%
coursework
MA2158 Linear Algebra and
Calculus
3 A A
For Advanced Standing II students (Senior-year Entry)
Students should COMPLETE AND PASS all the following required courses.
(30 or 33 or 36 units)
Course
Code
Course Title Units
Worth
Semester
Offered
Semester
Examined
AP2191 Electricity and
Magnetism
3 A A
AP3202 Modern Physics 3 B B
AP3204 Waves and Optics 3 B B
AP3205 Electromagnetism 3 B B
AP3244 Design Laboratory 3 B 100%
coursework
AP3251 Quantum Physics 3 A A
AP3272 Introduction to Solid
State Physics
3 B B
AP3290 Thermodynamics 3 A A
AP4216/
AP4217/
FS4003/@
FS4004*
Project/
Dissertation/
CES Placement Project/
Overseas Research
Internship Scheme
3/
6/
6/
9
A/
AB/
BSA/
B
100%
coursework
MA2158 Linear Algebra and
Calculus
3 A A
@ Students taking AP4216 Project are required to take 3 more credits of elective course.
20
FS4003 CES Placement Project (6 CU) can be used to replace AP4217 Dissertation
(6 CU).
* Students who completed FS4004 Overseas Research Internship Scheme can take 3 credit
units elective less to fulfill the major requirement.
21
2. Electives
Students should acquire a minimum of 18 or 21 or 24 units from the following
elective courses.
Course
Code
Course Title Units
Worth
Semester
Offered
Semester
Examined
AP3171 Materials Characterization
Techniques
3 B B
AP3230 Nuclear Radiation and
Measurements
3 not offered NA
AP3240# Biological Physics 3 B B
AP3242 Directed Studies in
Physics/Materials
Engineering
3 not offered
NA
AP4120 Microelectronic Materials
and Processing
3 not offered
NA
AP4121 Thin Film Technology and
Nanocrystalline Coatings
3 B B
AP4230 Radiation Safety 3 not offered NA
AP4253 Photonic Materials Physics 3 not offered NA
AP4254 Fundamentals of Laser
Optics
3 A A
AP4255 Optoelectronic Devices and
Systems
3 B B
AP4265 Semiconductor Physics and
Devices
3 B B
AP4271 Environmental Radiation 3 A A
AP4272 Environmental Radiation
Measurements
3 not offered
NA
AP4273 Special Topics in Physics 3 not offered NA
AP4274 Radiation Biophysics 3 A A
AP4275 Radiological Physics and
Dosimetry
3 B B
AP4280 Advanced Optics
Laboratory
3 B 100%
coursework
AP4282 Physical Optics 3 A A
AP4283 Medical Physics I 3 A A
AP4284 Medical Physics II 3 B B
#Availability subject to approval
NA: Not Applicable
22
Streamings
1. Photonics Stream for BSc (Hons) Applied Physics
15 credits from the below list:
AP3242 Directed Studies in Physics/ Materials Engineering (3 credit units)
AP4216 Project (Photonics related) (3 credit units)
AP4217 Dissertation (Photonics related) (6 credit units)
AP4253 Photonic Materials Physics (3 credit units)
AP4254 Fundamentals of Laser Optics (3 credit units)
AP4255 Optoelectronic Devices and Systems (3 credit units)
AP4273 Special Topics in Physics (if related to Photonics) (3 credit units)
AP4280 Advanced Optics Laboratory (3 credit units)
AP4282 Physical Optics (3 credit units)
FS4002* Industrial Attachment Scheme (Photonics related) (3 credit units)
* FS4002 Industrial Attachment Scheme is an internship training offered by the Co-
operative Education Centre of the College of Science and Engineering. It will be counted
as a free elective course.
23
2. Nuclear Environmental Physics Stream for BSc (Hons) Applied
Physics
15 credits from the below list:
(Courses in the Applied Physics major)
AP3230 Nuclear Radiation and Measurements (3 credit units)
AP3242 Directed Studies in Physics/ Materials Engineering (3 credit units)
AP4216 Project (Nuclear Environmental Physics related) (3 credit units)
AP4217 Dissertation (Nuclear Environmental Physics related) (6 credit units)
AP4230 Radiation Safety (3 credit units)
AP4271 Environmental Radiation (3 credit units)
AP4272 Environmental Radiation Measurements (3 credit units)
AP4273 Special Topics in Physics (if related to Nuclear Environmental
Physics) (3 credit units)
AP4274 Radiation Biophysics (3 credit units)
(Course not in the Applied Physics major, and students can take this course as a
free elective course):
AP4231 Nuclear Reactor Physics (3 credit units)
24
3. Materials Physics Stream for BSc (Hons) Applied Physics
15 credits from the below list:
AP3171 Materials Characterization Techniques (3 credit units)
AP4120 Microelectronic Materials and Processing (3 credit units)
AP4121 Thin Film Technology and Nanocrystalline Coatings (3 credit units)
AP4216 Project (Materials Physics related) (3 credit units)
AP4217 Dissertation (Materials Physics related) (6 credit units)
AP4253 Photonic Materials Physics (3 credit units)
AP4265 Semiconductor Physics and Devices (3 credit units)
25
4. Biomedical Physics Stream for BSc (Hons) Applied Physics
15 credits from the below list:
(Courses in the Applied Physics major)
AP3230 Nuclear Radiation and Measurements (3 credit units)
AP3242 Directed Studies in Physics/ Materials Engineering (3 credit units)
AP4216 Project (Biomedical Physics related) (3 credit units)
AP4217 Dissertation (Biomedical Physics related) (6 credit units)
AP4273 Special Topics in Physics (if related to Biomedical Physics)
(3 credit units)
AP4274 Radiation Biophysics (3 credit units)
AP4275 Radiological Physics and Dosimetry (3 credit units)
AP4283 Medical Physics I (3 credit units)
AP4284 Medical Physics II (3 credit units)
(Courses not in the Applied Physics major, and students can take these courses as
free elective courses):
AP4232 Radiotherapy Physics (3 credit units)
AP4233 Imaging Physics (3 credit units)
5. General (no streaming) Students can opt to become a generalist, i.e., students do not specialize in any one of the
above streams.
26
Pre-requisites and Precursors Please refer to
http://www.cityu.edu.hk/arro-
cat/catalogue/current/catalogue_UC.htm?page=B/B_course_code_AtoZ_A.htm
for more updated information. Prerequisites are requirements that must be fulfilled
before a student is able to register in a particular course.
Precursors to courses are not requirements, but students are advised to complete
precursors before taking such courses if possible.
Recommended Study Plan
A suggested course schedule for BSc (Hons) Applied Physics students
Advanced Standing I and II students can consider adopting the following study plan
with appropriate adjustment.
Year 2
Sem A (credit unit) Sem B (credit unit)
AP2191 Electricity and Magnetism (3)
AP3202 Modern Physics (3)
AP2212 Measurement and Instrumentation (3)
AP3204 Waves and Optics (3)
MA2158 Linear Algebra and
Calculus (3)
Gateway English (3)
Gateway English (3) Gateway Education course (6)
Sub-total = 12 units Sub-total = 15 units
Year 2 Total = 27 units
Year 3
Sem A (credit unit) Sem B (credit unit)
AP3251 Quantum Physics (3) AP3205 Electromagnetism (3)
AP3290 Thermodynamics (3) AP3244 Design Laboratory (3)
Chinese Civilisation – History and
Philosophy (3)
AP3272 Introduction to Solid State
Physics (3)
Gateway Education course (6) Elective (3)
Sub-total = 15 units Sub-total = 12 units
Year 3 Total = 27 units
27
Year 4
Sem A (credit unit) Sem B (credit unit)
AP4216/
AP4217
Project/
Dissertation (3)
AP4217 Dissertation (3)
Elective (12) Elective (9 or 12)
Sub-total = 15 units Sub-total = 12 units
Years 4 Total = 27 units
28
Brief Course Description
AP1201 General Physics I
Mechanics. Heat and gases. Waves. Optics.
AP2191
AP2212
Electricity and Magnetism
Electric charge. Electric fields. Gauss’ law. Electric potential.
Capacitance. Current and resistance. Circuits. Magnetic fields.
Magnetic fields due to current. Induction and inductance.
Magnetism and matter. Waves and optics.
Measurement and Instrumentation
Introduction to instrumentation. Measurement principles and basic
instruments. Case studies of measurements.
AP3171 Materials Characterization Techniques
General classification analytical techniques and major limitations,
guidance for their choice. Scanning electron microscopy (SEM),
environmental SEM, energy dispersive X-ray spectroscopy (EDS),
wave dispersive spectroscopy (WDS) cathodoluminescence (CL).
Crystallography and diffraction, real and reciprocal space.
Transmission electron spectroscopy (TEM), bright and dark field
imaging, high resolution TEM (HRTEM), selected area diffraction
(SAD). Analytical techniques associated with TEM. Auger electron
spectroscopy (AES), scanning Auger spectroscopy (SAM), X-ray
photoelectron spectroscopy (XPS), ultraviolet photoelectron
spectroscopy (UPS). Mass spectrometry, secondary ion mass
spectrometry (SIMS). Rutherford backscattering spectroscopy (RBS),
elastic recoil detection analysis (ERDA), proton induced X-ray
emission (PIXE). Surface profiling, scanning probe microscopy
(SPM), atomic force microscopy (AFM), scanning tunnelling
microscopy (STM).
AP3202 Modern Physics
Special relativity. Concepts of general relativity. Particle property of
waves. Wave property of particles. Atomic structure. X-rays.
Nuclear structure. Introduction to elementary particles.
29
AP3204 Waves and Optics
Vibrations. Wave models. Wave behaviours. Wave transmission.
Sound waves. Light wave basic. Light wave interference and
diffraction. Geometrical optic. Optical instrument.
AP3205 Electromagnetism
Vector analysis. Electrostatics. Special techniques. Electric fields in
matter. Magnetostatics. Magnetic fields in matter. Electrodynamics.
Conservation laws. Electromagnetic waves. Electrodynamics and
relativity.
AP3230 Nuclear Radiation and Measurements
Basic concepts of nuclear physics. Nuclear decay. Interactions of
radiation with matter. Radiation detection systems.
AP3240 Biological Physics
Concepts of biological physics. DNA and the exploration of the
DNA double helix structure using X-Ray diffraction. From DNA to
amino acids and protein folding. Physics of diffusion and its
application inside the cell. Self-assembly of lipid bilayer. Cellular
mechanics, motor proteins and actin filaments. Signal transduction
and biosensors, such as photoreceptors. Brief instruction of cell
development and the physical and mathematical model of pattern
formation of animations. Molecular dynamics simulations of lipid
membrane and proteins.
AP3242 Directed Studies in Physics/Materials Engineering
The course has no specific syllabus. An academic staff member can
direct student(s) to attend a particular workshop or course, participate
in a study tour, conduct fieldwork, library search or a small research
project, or assist in a bigger project, etc. in Physics or Materials
Engineering. A student can also approach an academic staff member
to carry out directed studies.
AP3244 Design Laboratory
Physics measurement and investigation.
30
AP3251 Quantum Physics
Interaction of light with matter. Planck postulate and photon. Wave-
particle duality of matter. Localized wave, uncertainty principle and
its applications, macroscopic quantum phenomena. The
superposition principle of states, physical variables as operators and
the Schrödinger equation, completeness and onthonormality, steady-
state Schrödinger equation, Eigenvalue problem. Probability flux
density, free particle, and infinite quantum well. Potential step and
finite quantum well. Calculation of finite quantum well. Particle
scattering. Applications of simple 1D models. Harmonic oscillator
and vibrational spectroscopy. Angular momentum, the orbital and
magnetic quantum numbers. Hydrogen atom, ground state. Angular
momentum, space quantization, Zeeman effect and spin-orbit
interaction.
AP3272 Introduction to Solid State Physics
Crystal structure. Lattice vibration. Fermi electron gas. Energy band
in solids. Semiconductors. Dielectric properties of solid. Magnetic
properties of solids. Superconductivity.
AP3290 Thermodynamics
Introduction and the 1st laws of thermodynamics. The 2
nd law of
thermodynamics and heat engines. Property relationships.
Equilibrium. Statistical thermodynamics.
AP4120 Microelectronic Materials and Processing
Semiconductor physics. Crystal growth and wafer preparation. Epitaxy. Oxidation. Lithography. Etching. Polysilicon and dielectric film deposition. Diffusion. Ion implantation. Metallization. Testing, assembly, and packaging.
31
AP4121 Thin Film Technology and Nanocrystalline Coatings Definition of thin films. Environment and molecular and plasma processes in thin film deposition. Cold and thermal plasma. Requirement for substrate, substrate cleaning. Formation of thin films. Properties of thin films. Mechanical, electrical, thermal, chemical, and optical properties of thin films. Thermal evaporation. Laser ablation, synthesis of nanomaterials. Electrical discharges used in thin film deposition. Practical electric discharge configuration for deposition of thin films, direct current electric discharges, radio-frequency discharges, microwave discharges, electron cyclotron resonance plasma, matching units, floating potential, bias potential, plasma potential, effective bias, self-bias. Physical deposition techniques. Chemical vapor deposition techniques (CVD). Other processing technologies.
AP4216 Project Projects may relate to specific areas of the course, but designs that integrate course elements are strongly encouraged. In practice, projects related to the final year applications and core areas inherently possess this feature and are therefore favoured. A comprehensive list of possible projects will be made available for selection by students.
AP4217 Dissertation This is an extension of AP4216 Project. Students will work to a greater depth on the same project that he/she has already selected in AP4216 Project.
AP4230 Radiation Safety
Radiation activity and doses. Biological effects of radiation.
Radiation protection and recommended radiation limits.
Fallouts from nuclear reactors.
AP4253 Photonic Materials Physics
Light-matter interaction, constitutive relationships, Lorentz
oscillator model. Photonic crystals. Metamaterials. Full-wave
simulations.
32
AP4254 Fundamentals of Laser Optics
Review the EM theory of light, specifications of light, Maxwell
equations, reflection and transmission, polarization,
interference and diffraction, magneto-optic and electro-optic
effects. Light sources and spectra, luminescence, blackbody
radiation, hydrogen spectra and the Bohr model, spectra of
emission, absorption and scattering. Spectra of atoms,
molecules and solids, quantum numbers. Laser operation
modes, laser characteristics, applications, safety. Stimulated
emission and population inversion, threshold condition.
Oscillation and resonance cavity, Q-factor and gain, cavity
lifetime. Multiple interference and Fabry-Perot interferometer,
the airy function, chromatic resolving power, Fabry-Perot laser
and threshold gain, stable cavity. Beam modes. Diode lasers
and its applications, heterojunction design for confinement of
injected carriers and light. Three-level and four-level lasers,
Ruby laser and Nd:YAG laser, their applications, transparent
power. He-Ne laser, engineering problems, CO2 laser and
various designs, applications.
AP4255 Optoelectronic Devices and Systems
Optical fibres. Optical detectors. CCD.
AP4265 Semiconductor Physics and Devices
Review of quantum physics. Semiconductor bandstructure.
Semiconductor transport properties. P-N junctions. Device
applications of p-n junctions. Bipolar junction transistor. Metal
oxide semiconductor field effect transistors (MOSFET).
Junction field effect transistors (JFET). Integrated circuits.
AP4271 Environmental Radiation
Units and terminology used in radiation. Common radiations.
Biological effects of radiation. Radiation protection and
recommended radiation limits. Natural radiation. Radon properties.
Radon measurements. Radon dosimetry.
33
AP4272 Environmental Radiation Measurements
Basic data-analysis methods for experiments in environmental
radiation. Detection limits and minimum detection activity.
Experimental techniques in environmental radiation, with focus on
measurements of concentrations of radon gas and progeny.
Experiments and mini-projects.
AP4273 Special Topics in Physics
To be specified once the topic is fixed.
AP4274 Radiation Biophysics
Basic radiation biophysics. Effects of ionizing radiation on the human
body. Cell survival curve theory. Basic radiotherapy physics.
AP4275 Radiological Physics and Dosimetry
Atomic and nuclear structure. Origin and properties of radiations.
Basic radiation biophysics. Applications of radiation. Quantities and
units of ionizing radiations. Interaction of radiation with matter.
Radiation dosimetry and measurement methods. Absolute dose
measurement. Relative dose measurement.
AP4280 Advanced Optics Laboratory
Four mini-projects will be chosen in 6 broad areas of study: principles
of applied optics, liquid crystals and diffractive optics, optical fiber
applications, interferometric techniques, CW and pulsed lasers,
characterization of materials.
AP4282 Physical Optics
Review of optical phenomena. Propagation of light. Optical
properties of solids. Polarized light. Reflection and refraction.
Interference. Fourier analysis. Coherence. Diffraction and Gaussian
Beams. Introduction to photonics and nano-optics. Selected
applications of modern physical optics.
34
AP4283 Medical Physics I
Concept of medical physics. Dynamic, static and frictional forces
acting on and in human body. Physical property of human skeleton.
Concept of thermometry and thermography together with their
clinical applications. Energy consumption in human body. Physics of
the lungs and breathing. Sound and its applications in medicine. The
theory of ultrasound and its applications as diagnostic tool. The
mechanism of phonation. Anatomy of ear including outer ear, middle
ear and inner ear, to the sensitivity of the ear. Problems of hearing
disability and the theory of hearing aids. Applications of visible light
in medicine, infrared and ultraviolet light in medicine, laser in
medicine, applications of microscopes in medicine, and instruments
used in ophthalmology. Anatomy of eye, function of eye, mechanism
of vision, defective vision and its correction, color vision and
chromatic aberration. Physics, application and harm of diagnostic X-
Rays.
AP4284 Medical Physics II
Physics of the cardiovascular system. The nervous system and its
physiological function. Electrical signals from muscles
(electromyogram – EMG), heart (electrocardiogram – ECG), brain
(electroencephalogram – EEG), and eye (electroretinogram and
electrooculogram). Biopotentials or electric properties measurement.
Magnetic signals from heart and brain. Applications of electricity in
medicine in aspects of diagnosis and treatment. Electricity-related
medical application.
BCH1100 Chemistry
Atoms, Ions, and Molecules. Periodic table. Electronic structure of
Atom. Chemical bonding. Stoichiometry. States of matters. Chemical
kinetics and equilibrium. Thermochemistry. Acids and bases.
Oxidation and reduction. Nuclear chemistry. Inorganic and organic
chemistry. Biological chemistry. Global warming. Ozone layer. Acid
rain. Energy. Electricity. Chemical cells. Nuclear power. Minerals.
Plastics. Polymers. Nutrition. Drugs. Molecules of life. And many
more to be discovered.
35
BCH1200 Discovery in Biology
Microbiology of microorganism. Chemistry of life. DNA and
biotechnology. Biology of cells. Evolution and biodiversity. Plant
physiology. Anima physiology. A brave new world.
CS1102 Introduction to Computer Studies
Logical operations. Binary arithmetic. Basic operations of computer,
data, CPU, memory, bus, IO, peripherals. Programming concepts.
Basic data types. Variables, expressions, and operations. Compound
statements and control structures. Functions and parameters.
Operating systems. File system. End-user computing. Databases.
Data communication. Internet. Concepts of client-side and server-
side scripting. Digital media, multimedia software tools. Basic
computer security, virus, filtering and scanning tools.
CS1302 Introduction to Computer Programming
The development of algorithms, program design, programming
language, control structures, data types, arrays, functions and
parameters, composite data types, structured decomposition,
programming style, program testing, introduction to recursion.
MA1200 Calculus and Basic Linear Algebra I
Polynomials. Mathematical induction. Binomial theorem. Coordinate
geometry and conic sections. Basic trigonometry. Functions and
inverses. Limits, continuity and differentiability. Techniques of
differentiation, implicit, logarithmic and parametric differentiation.
Successive differentiation. Applications of differentiation.
MA1201 Calculus and Basic Linear Algebra II
Definite and indefinite integrals. Techniques of integration,
integration of rational functions, integration by substitution,
integration by parts. Physical and geometric applications of
integration. Vectors in R2 and R3. Scalar products, cross products,
triple scalar products. Linear (in)dependence. Matrices.
Determinants, cofactor expansion. Systems of linear equations,
Gaussian elimination, Cramer’s rule. Matrix inverses, Gauss-Jordan
elimination method. Arithmetic of complex numbers. Polar and Euler
forms. De Moivre’s theorem and its applications.
36
MA1300 Enhanced Calculus and Linear Algebra I
Polynomials. Mathematical induction. Coordinate geometry and
conic sections. Basic trigonometry. Functions and inverses. Limits of
sequences and infinite series. Limits, continuity and differentiability
of functions. Techniques of differentiation, implicit, logarithmic and
parametric differentiation. Successive differentiation.
MA1301 Enhanced Calculus and Linear Algebra II
Basic theorems of differentiation. Applications of differentiation.
Definite and indefinite integrals. Techniques of integration,
integration by substitution, integration by parts. Improper integrals.
Physical and geometric applications of integration. Vectors in R2
and
R3. Scalar products, cross products, triple scalar products. Linear
(in)dependence. Applications to equations of lines and planes.
Matrices. Determinants, cofactor expansion. Systems of linear
equations, Gaussian elimination, Cramer’s rule. Matrix inverses,
Gauss-Jordan elimination method. Arithmetic of complex numbers.
Polar and Euler forms. De Moivre’s theorem and its applications.
MA2158 Linear Algebra and Calculus
Eigenvalues and eigenvectors. Applications in elasticity. First-and
second-order ordinary differential equations and applications. Vector
calculus. Partial differentiation. Multiple integration. Gradient,
divergence and curl. Theorems of Gauss, Stokes and Green.
Applications in energy methods, stress and strain transformations, etc.
Fourier series.
Detailed Course Description Please refer to
http://www.cityu.edu.hk/arro-
cat/catalogue/current/catalogue_UC.htm?page=B/B_course_code_AtoZ_A.htm