8/10/2019 TI_01_1999_30

1/4

Technical Information

TI_01_1999_30_03.fm U

Replacement Ignition Systems for STIHL Chainsaws and Power Tools

1. Assignment of ReplacementIgnition Systems

1.1 General

A number of universal versions of ignition modulesare available that can be used for several engine

families. They are intended to help simplify

stockkeeping and reduce service costs.

In most cases these universal ignition models differ

from the versions installed on the production line in

terms of make, shape and part number, but are

otherwise completely compatible as far as

installation and function are concerned.

For some replacement ignition modules it is

necessary to shorten the ignition lead and/or the

short circuit wire and crimp a new (different)

connector to the short circuit wire. The required

length of the ignition lead is shown in the included

reference table and the spare parts list.

For the sake of clarity, the replacement ignition

modules and flywheels of current chainsaw and

power tool models are listed in the reference table.

Replacement parts for older machines can be found

in their respective illustrated parts lists

(refer to Spare Parts for Previous Models).

Warning!Different ignition modules with different

flywheels are available in some cases for a single

engine. It is essential to use only the combinationsshown in the list. Using an incorrect combination

may impair functional and operational safety as well

as product safety (e.g. excessively high RPM,

running in reverse).

01.1999

8/10/2019 TI_01_1999_30

2/4

Page 2 Technical Information 01.1999

TI_01_1999_30_03.fm

1.2 Assignments

1.2.1 Chainsaws

* Ignition lead not replaceable

Model Series Ignition modulePart No.

Ignition lead lengthmm [in]

FlywheelPart No.

Remarks

009, 010,

011, 012 1120 0000 400 1306 360 (14 3/16) 1120 400 1206

017 1130 1130 400 1300 * * 1130 400 1200

018 1130 1130 400 1302 * * 1130 400 1201

019 T 1132 1132 400 1300 * * 1130 400 1200

020 1114 0000 400 1302 230 (9) 1114 400 1211

020, 020 T 1129 0000 400 1306 295 (11 5/8) 1129 400 1201

021, 023, 025 1123 0000 400 1306 165 (6 1/2) 1123 400 1203

024, 026 1121 0000 400 1300

0000 400 1300

150

150

(5 7/8)

(5 7/8)

1121 400 1200

1121 400 1207

Standard

Heating028 1118 0000 400 1300 175 (6 7/8) 1118 400 1206

029, 039 1127 0000 400 1300 175 (6 7/8) 1127 400 1200

034 1125 0000 400 1300 195 (7 3/4) 1125 400 1202

036 1125 0000 400 1300

0000 400 1300

195

195

(7 3/4)

(7 3/4)

1125 400 1202

1125 400 1208

Standard

Heating

038 1119 0000 400 1300 140 (5 1/2) 1119 400 1206

044 1128 0000 400 1300

0000 400 1300

150

150

(6)

(6)

1128 400 1200

1128 400 1213

Standard

Heating

046 1128 1122 400 1314

1122 400 1314

150

150

(6)

(6)

1128 400 1211

1128 400 1212

Standard

Heating

051, 076 1111 1111 400 1303 290 (11 7/16) 1111 404 1204064 1122 0000 400 1300 205 (8 1/16) 1122 400 1203

066 1122 1122 400 1314

1122 400 1314

205

205

(8 1/16)

(8 1/16)

1122 400 1217

1122 400 1218

Standard

Heating

084 1124 1124 400 1308

1124 400 1308

200

200

(7 7/8)

(7 7/8)

1124 400 1203

1124 400 1207

Standard

Heating

088 1124 1124 400 1309 200 (7 7/8) 1124 400 1210

8/10/2019 TI_01_1999_30

3/4

Technical Information 01.1999 Page 3

TI_01_1999_30_03.fm

1.2.2 Power tools

* Ignition lead not replaceable 1)Ignition coil2)Trigger unit

Model Series Ignition module

Part No.

Ignition lead length

mm [in]

Flywheel

Part No.

Remarks

FS 25-4 4170 4170 400 1300 * * 4170 400 1201

FS 36, 40, 44

FC 44 4130 4130 400 1300 * * 4130 400 1250

FS 45 4140 4140 400 1300 * * 4140 400 1200

FS 65-4 4170 4170 400 1300 * * 4170 400 1211

FS 72, 74, 76 4133 4133 400 1301 175 (6 7/8) 4133 400 1200

FS 75, 80, 85

FR 85, FC 75 4137 4137 400 1307 * * 4137 400 1200

FS 88 4126 4126 400 1310 225 (8 7/8) 4126 400 1201

FS 108, FR 108 4135 4135 400 1300 175 (6 7/8) 4129 400 1200

FS 120, 200 4134 4134 400 1306 * * 4134 400 1200

FS 160, 180,

FS 220, 280

4119 0000 400 1306 290 (11 7/16) 4119 400 1201

FS 300, 350

FR 350 4134 4134 400 1306 * * 4134 400 1200

FS 360, 420 4116 0000 400 1300 410 (16 1/16) 4116 400 1200

FS 400, 450

FR 450 4128 4128 400 1306 305 (12) 4128 400 1200

FS 500, 550 4116 4116 400 1306 410 (16 1/16) 4116 400 1200

HT 70, 75 4138 4137 400 1307 * * 4137 400 1200

HS 72, 74, 76 4226 4133 400 1301 175 (6 7/8) 4133 400 1200

HS 75, 80, 85 4226 * *

HL 75, FH 75 4230 4137 400 1307 * * 4137 400 1200

BR 106 4222 4222 400 13001)

4126 400 10012)325 (12 13/16) 4222 400 1200

BR 320, 400

SR 320, 400 4203 4203 400 1301 270 (10 5/8) 4203 400 1200

BG 72 4227 4133 400 1301 175 (6 7/8) 4133 400 1200

BG 75 4227 4137 400 1307 * * 4137 400 1200

TS 350, 360 4201 1108 400 0800 325 (12 13/16) 1108 400 1205

TS 400 4223 4223 400 1300 370 (14 9/16) 4221 400 1200

TS 460 4221 4223 400 1300 4221 400 1200

TS 510, 760 4205 1111 400 13011)

4205 400 10012)320 (12 5/8) 1111 404 1204

BT 106 4311 4222 400 13001)

4126 400 10012)175 (6 7/8) 4129 400 1200

BT 120 4313 4134 400 1306 * * 4134 400 1200

BT 360 4308 1108 400 0800 325 (12 13/16) 1108 400 1205

8/10/2019 TI_01_1999_30

4/4

Page 4 Technical Information 01.1999

TI_01_1999_30_03.fm

Last Technical Information on STIHL ignition systems: 22.98

1999 Andreas STIHL AG & Co. Technical Documentation

Waiblingen D1/MTK 6480