lbx online magazine

“We found the Lumberman’s Exchange to be the easiest and most cost effective way to sell our excess equipment.

—K. Ellis, Reed KY

2009 PRO MODEL MULTITEK 2040XP2

Firewood Processor w/60” Circle SawItem ID: 12220Contact: Daren/MichellePh: 800-315-9950 x603

SUPER VALUE!Item ID: 12263Contact: TomPh: 800-315-9950 x604

2008 VALMET 890.3 20-TON FORWARDER

DEALS OF THE MONTH

See Photos online at—

www.LBXonline.com

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

June 2011

www.banditchippers.com

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

Leading the industry in bundle cross cut systems since 1957!

The New L-M “I-CUT” Bundle cross cut system!* 60’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

New Design!New Technology!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

P.O. Box 108 • 125 Airport Road • Grangeville, Idaho • 83530

CALL OR EMAIL

(503) [email protected]

PRICES ARE NOW ON THE WEB!

JEM MACHINE, INC. www.JemMachine.com"Your Full Source of Good

Sawmill Equipment"

INVENTORY CHANGES DAILY

CHIP BINS 36 X 60 RAWLINGS HOG

MONTGOMERY ER 18 HOG

NICHOLSON 22” A5

SALEM 6’ BANDMILL

$10,500 $10,000

SODERHAMN 84" CHIPPER

MAIER RE-CHIPPER

CM&E 48" CHIPPER W/MOTOR

JEFFREY WB HAMMER HOG

(800) 282-5597 Office (208) 983-0633 Fax

STROM 72” CUT-OFF SAW

JUST IN!

For Classifieds Call Your LBX REP at 1-800-315-9950 The Original Lumberman’s Exchange n 5

FOR CLASSIFIEDS Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.comBANDMILLS & HEADSAWS

2002 Woodmizer LT-40HDG-25 - Powered by a 25-hp gas motor. Has 800 hours and comes with 5 boxes of blades. Also has debarker. Price: 16,000 USD - Item ID-12081 - Michelle 800-315-9950 x603

BLOWERSPhelps blower with 20 HP motor - Item ID-11742 - Michelle 800-315-9950 x603

CHIPPERSCM&E 36” chipper. Bottom discharge. 75 HP - Item ID-11751 - Michelle 800-315-9950 x6032000 BANDIT 150XP - CUMMINS 3.9L DIESEL 12 IN. CAPACITY - Item ID-11790 - Michelle 800-315-9950 x6032008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID-12059 - Tom 800-315-9950 x604Precision 48” 3-knife chip pac, 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. Price: 24,000 USD - Item ID-12128 - Daren 800-315-9950 x603Fulghum 54” 8-knife chipper. Fulghum 54” 8 knife chipper. Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present. - Item ID-11737 - Michelle 800-315-9950 x603HMC 48” Chipper - HMC 48”side entry, top discharge chipper. It hs a model CM 48. Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID-11750 - Michelle 800-315-9950 x603Precision 58” Chip Pack - Complete refurbished Precision 58” Chip Pack. This machine is been completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603Precision 58” Chipper - Complete rebuilt with Factory Warranty. - Item ID-12232 - Daren 800-315-9950 x603Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi

** INFO LINK **AJD Forest ..............................37Alex Lyons & Sons ................12Amark .....................................24B & B Mfg. .............................34B. H. Payne .............................15Baker ...................................6, 16Bandit ........................................1Bartlett Saw Service ................27Bay Equipment ..........................7Ben Jones Equipment ........19, 22Blockbuster .............................31Buck Equipment (AIM) .........23Cardinal Wireless ....................35Cord Master ............................26Corley Mfg ..............................35CRD Metalworks ......................7Dyna Products .........................18 EXPO Atlanta 2011 ...............39James G. Murphy............10, 11Jem Machine .............................4Johnston Auction ...................13

Litco ........................................15LM Equipment, Canada ............3M&F Gauge ............................23Machinery Sales Co., Inc. .........8Menominee Saw ......................30Midwest Sharpening Service ..33Multitek ...................................14Phase-A-Matic ........................27Piper’s Saw Shop ....................28Resource Recovery ...................9Rotochopper ............................40Row Electric ............................25Sawmill Exchange ..................31Select Sawmill ........................32Sering Sawmill ........................25Suffolk Machinery ....................2Truck & Trailer World.............17US Blades................................36Winston Equipment .................29Woodmizer .................CenterfoldX-S Iron ....................................9

Original

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ad-vertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its prin-ciples and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

©2011 by Woods Publishing.

** Auctions **JAMES G. MURPHY — Page 10, 11

R. F. COON LOGGING & OTHERS

Orofino, Idaho

SNOW MTN. MILL

Anacortes, WashingtonALEX LYONS & SON —

COMPLETE LIQUIDATION

Strong, MaineJOHNSTON AUCTION — Page 13

SAWMILL EQUIPMENT

Moberly, Missouri

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial wood-working plants.

PUBLISHER Woods Publishing

ADVERTISING SALES Morris Woods (615) 349-1890 [email protected]

DESIGN DIRECTOR Heninger & Associates [email protected]

EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

AD SUBMISSIONS May be sent to— [email protected]

POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** Calendar **Atlanta EXPO 2011Coming August 11–12, 2011 Georgia World Congress Center

WOODSMEN’S FIELD DAYSComing August 19–21, 2011 Bonneville, New York

MIDWEST FORESTComing Sept. 30–Oct. 1 Cape Girardeau, Missouri

20XI

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

The

Original L

umbe

rman

’s E

xcha

nge

❑ P

leas

e Ad

d ❑

Ple

ase

Chan

ge ❑

Ple

ase

Rem

ove

Co

mp

an

y N

am

e*

*Com

pany

nam

e an

d ad

dres

s re

quire

d to

pro

cess

you

r cha

nge.

✁

6 n June 2011 Visit us online at www.LBXonline.com!

EQUIPMENTREPRESENTATIVES

Daren Bodine Phone: 800-315-9950 Ext. 603

Tom HirtPhone: 800-315-9950 Ext. 604

CALL US TODAY FOR ALL YOUR USED

EQUIPMENT NEEDS!

FREE EQUIPMENT LISTINGS! CALL –(800) 315-9950

www.logtolumber.com

eMail:[email protected]: (800) 548-6914

DEALS OF MONTH FROM

–MAY–

See Photos online at

Priced well below market value. Komatsu undercarriage loaded with options.Item ID: 12119Contact: TomPh: 800-315-9950 x604

2008 TIMBCO/VALMET 445FXL

2009 PRO MODEL MULTITEK 2040XP2

Firewood Processor w/60” Circle SawItem ID: 12220Contact: Daren/MichellePh: 800-315-9950 x603

‘99 Hydro-Ax 611 EXItem ID: 12195Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

tractor. Cab has sound protection and heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild.

Can be used to make fuel-wood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 - Michelle 800-315-9950 x603

CHOP SAWSBlock saw - This well-guarded block saw has a 4x6 capacity. Blocks drop into a small elevator. It has a motor on the elevator and one on the saw. Motor controls are present. Air is hooked up to actuate the saw stroke. Feed is manual. Block length is adjustable READY TO GO!! Price: 4,500 USD - Item ID-11838 - Daren 800-315-9950 x603

COMPLETE SAWMILLS2005 Timberharvester Sawmill - Purchased new in December 2005, has 1550 hours, powered by a 47-hp Lombardini diesel, log debarker, computer setworks, can cut up to a 36”x21’ log. Stored and run inside. - Item ID-11584 - Michelle 800-315-9950 x603Frick Automatic Sawmill, 3 Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work! - Item ID-12217 - Tom 800-315-9950 x604Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Michelle 800-315-9950 x603Sawmill With Chipper - Carthage


HEAVY DUTY FORKSAT BIG SAVINGS

■ IN STOCK■ SAME DAY SHIPMENT■ LET US QUOTE YOUR

SPECIAL DESIGN FORKS. VERY COMPETITIVE PRICING.

BAY EQUIPMENT CO. / (616) 392-1811

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

Also, 4”, 5”, 6” thick forks to 168” long.

Simple Controls &Push Button Splitting

Circular Saw Saveson Maintenance

50 BHP CAT Power —STANDARD!

Designed to Work —

NOT TO BE WORKED ON!

The All New Rapido Loco Juniorat the Low Introductory Price of

Until April 1st, 2011

Coming Soon!Woodbine Pro 20 Chainsaw

& Loco 20 Circle BladeCall Now

for Specs & More Info.

17 Hyde Hill Road, Williamsburg, MA 01096www.crdmetalworks.comEmail: [email protected]

Performance, Power & Profi t

carriage, helle sawmill and chipper - Item ID-11992 - Michelle 800-315-9950 x603

DEBARKERSHMC V206 Debarker - HMC V206 Debarker, Waste conveyor, Cab, 30 hp head Price: - Item ID-12228 - Daren 800-315-9950 x603

EDGERS & GANGSMeadows 7” X 48” Combination edger. Serial # T7-1738-99. Was once used with a shifting saw. Some, but not all of the parts for this are present. There are three 23” split strob saws. There is an integrel hydraulic system on this machine. 8’ outfeed. 10’ infeed with hydraulic roller holdover and two air popup pushover chains. Remote operator station. Hydraulic press roll lifter. Main shaft is 2-15/16”. There is no main motor present. There is a mast for shifting lasers but the system is not complete. Footprint of unit: 7’ X 22’ - Item ID-11733 - Michelle 800-315-9950 x603Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID-11744 - Michelle 800-315-9950 x603Vertical edger for RH mill - 50 HP, 20” F saws with carbide bits, solenoid valves, splined arbor. Good looking edger. Price: 10,500 USD - Item ID-11781 - Daren 800-315-9950 x603

EDGERS & GANGSPendu Double Arbor GangSchurman 6TA48 CombinationUkiah 6” x 48” Gang EdgerSchurman 12” Double Arbor Gang

FILING ROOM EQUIPMENT(3) Vollmer CH210 Auto SharpenersGockel 163” Mag Bed GrinderArmstrong 3-10C Stretcher RollVollmer Cana E (8)Wright Mod. 1801 (3) Weinig R 934 Profile GrinderNewman G-200 GrindersHanchett Knife Grinders (10)Wright W-1600 Auto TipperArmstrong No. 90 EqualizerArmstrong Dual Side GrinderArmstrong Side ProArmstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleHanchett DN-40 Knife GrinderArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 B.S. Stretcher Roll

HOGS & PULVERIZERSJeffrey 36 x 60 ShredderJacobson Horizontal HogZeno Low-Noise GrinderWest Salem Big Brute GrinderJacobson Hammer MillW. Salem 52” Horizontal GrinderKimwood Rotary Hog 36 x 48Jeffrey 76WBH Horiz. HogGruendler 50XE Hammer Hog

MISCELLANEOUS(2) Peerless 24-Unit BinsTektronix Log Metal DetectorHyster S-60 ForkliftKimwood Short Block RipsawDog Ear MachineGlobe Strip SawMorbark Stac Trac, NEW

(866) 241-2977

OVER 13 ACRES OF GREAT BUYS ON USED EQUIPMENT!For complete equipment list, visit our website:

OR CALL AND ASK FOR DEPT. LX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

WE ARE PARTING OUT

WORLD’S LARGEST INVENTORYNew & Used Sawmill & Planing Mill Equipment

9802 North Vancouver Way

Portland, Oregon 97217

WE ARE OVERSTOCKED! PRICES REDUCED!TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG!

BANDMILLS & HEADRIGSKockums 6’ Air Strain BandmillMebor Horizontal BandmillSalem 6’ Air Strain BandmillKockums 6’ BandmillSalem 7’ RH BandmillSalem 5’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air Strain

CARRIAGES & DRIVESSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear CarriageUSNR 2000, 42" Stud CarriageSalem 60” 4-Block CarriageSalem 42” 4-Block Carriage

CHIPPERS & SCREENSPrecision 48” 8-Knife Drop F.BM&M 5’X14’ ScreenRotex 6’X16’ ScreenWest Salem 58" Horizontal FeedPrecision 8X8 ScreenKockums 8X8 ScreenPrecision 66" Horizontal F.Precision 118” HFBD ChipperPrecision 96” Whole LogPrecision 48” Horizontal F.CM&E 36” Rechipper

DEBARKERSNicholson 22” A-5 DebarkerNicholson 35" A-2 DebarkerNicholson 44” A-2 Debarker

Industrial 3496 Finger JointerIndustrial FJS-25 Finger J. SystemHurricane 28” Chop SawFruilmac End MatcherSamuels Plastic Strapper L&M Log Cut-Off SawsTimesaver Sanders (6)Lumber Stackers (3)Irvington 20’ Trimmer, 1’ SawsMereen-Johnson 48” Ripsaw 5-Arm Hyd. Tilt HoistSticker Recovery System

PLANERS & MOULDERSWeinig 22B Complete LineWeining 22A 5-HeadStetson-Ross Timber SizerMattison 226 12” MoulderMattison 228 16” MoulderDiehl 6-head TF MoulderBuss 55 Double SurfacerBuss 88 Double SurfacerWadkin 6-Head MoulderWeinig U22A, 6-headNewman 382 Double SurfacerNewman M712 12-KnifeS-R 6-10-A1 10-KnifeCoastal 24” 20-knife PlanerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersWeiniig P22N 5-Head

RESAWSSalem 5’ Air Strain HorizontalPendu 8” GangSmith Twin Horizontal ResawMcDonough 54” Twin Horizontal 36” Tri-State Tilting ResawTurner 48” Rollfeed ResawTurner 52” Rollfeed ResawSalem 6’ Horiz. Air StrainKockums 6’ Horiz. Twin Air StrainMcDonough 62” Linebar Resaw


Beaver Model 18

Coming Soon4 New Models

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

304.872.298899 Paystar - 525 Cummings, 46 Full Locker Rockwell Rears, 300,000 miles, 4 sets of bunks, 3rd Axel on rear of frame, Set up for Pup Trailer, 256 in wb ....................... $37,500

Barko 160A - 6 Cylinder Cummings powered, 52 inch continous turn grapple on 5th wheel trailer showing 3862 hrs....$14,500

99 John Deere 650G - Full Forestry package with winch, u/c @ 65%, 6500 hrs on good running machine . $27,500

Mack Hydra Seeder - Finn 1500 Gallon tank, Seeder powered by 4 cyl John Deere Engine, Truck powered by a 300 plus Mack, with 13 Spd trans ......... $17,500

79 Ford LTL 9000 - This is an off road log truck, 400 Cummings, 13 Spd trans, 46 Rears, 3RD axel at the back of frame ............................................................. $7,500

xs-iron.com

1989 Clark 666 Dual Arch Grapple SkidderItem ID: 12219Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

2008 Terex PT100 Skid Steerw/Mulcher, forks & brush bucket. Best deal on the market!

Item ID: 12188Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

FIREWOOD PROCESSORS2001 Multitek 2020 ldsc firewood processor with 20ft conveyer - 2001 Multitek 2020ldsc firewood processor with 20ft conveyer. Engine and Hydraulic pump replaced 820 hrs ago. Yanmar 65hp diesel engine, 404 Pitch Chain. This machine has a total of 3000 hours total on the machine - Item ID-12131 - Daren 800-315-9950 x6032005 Built-Rite model 50 SCP processor. Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota diesel $42,000 USD - Item ID-11619 - Daren 800-315-9950 x6032005 Multitek 2040xp2 + 30’ Conveyor - 2005 2040xp2 firewood processor, 80 hp John Deere Diesel, 30’ Conveyor, 2-strand roller chain, hydraulic lift, 40’ long, 20” log capacity, 8-way wedge, 3,300 hours 5th strand live deck arm for processing blocks as short as 24” (normally a $2,000 option), Very Well Maintained Heated Operator Cabin, Pilot Electric/Hydraulic Joysticks Safety Seat, Clean Out Pan Option (normally $1,000 option Price: 80,000 USD - Item ID-11871 - Daren 800-315-9950 x6032006 Timber Wolf Firewood Processor with 26’ conveyor, 1750

Hrs, auto cycle, operator cab, - Item ID-12020 - Daren 800-315-9950 x6032009 Pro Model Multitek 2040xp2 ss Firewood processor with 60” circle saw - 2009 Pro Model Multitek 2040xp2 ss Firewood processor with 60” circle saw, 80 hp John Deere, 16 way splitter

head, over-head grapple system, night processing light kit, 4 stand live deck, heated and A/C Cab. Also including Multitek FWC-30 conveyor. All in excellent shape and stored inside. Machine and Conveyor has +/- 800 hours. New over 160k. - Item ID-12220 - Daren 800-315-9950 x603Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but

electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800-315-9950 x604TIMBERWOLF Pro-HD XL Inline Firewood Processor, 80hp John Deere, Auto cycle, 8 way wedge,

FIREWOOD PROCESSOR

Hakki Pilke - 1 x 37 Easy PTO powered Firewood Processor. Two-way / Four-way standard, Six-way splitting wedge available. Excellent Condition. PTO Power Unit also Available.Contact: David Wilson

[email protected]

!"#

James G. Murphy Inc.Commercial & Industrial Auctioneers

18226 68th Ave NE, Kenmore, WA 980281.800.426.3008 - 425.486.1246

murphyauction.com

PUBLIC AUCTION!"#"$%&&'$(&))*')$+$,-./01

!"##$%&'$"($)##*+,'",-.$/'&!0*'-

!"#$%!%$&$'##(##!"#)*'*)+*'

),--./0#'1,234#5,00./0#*67.89:/1

;<9#=#>:?/:@?<A#=#B7/:#CCDE:F.:G#H=I4#J7:@?<A4#B7/:#CK

"E,L/,4#%MDN)J%N5#5%'JO#PCQR<1#MST#JE<23#'3.??:E@U#K;;V#JW7/?:EX.E?#YVZM5#M:-.9X:EU#K;;[#5./3=X:-1#CH[[#M:-.9X:EU#R<1#VCS#M:-.9X:EU#B,W/#M::E:#Y;[#M:-.9X:EU#R<1#VCS5\U#$<?.--#[YK#]<E?:EU#'3<0.1#^JV#'G./0#]<E?:EU#R<1# KC#^E<?:EU#R<1#MZR#M,_:EU# %/1`-# JMH#M,_:EU#N--.@#RW<-9:E@#ZSV#M,_:EU#a,9<1@7#KCH&'#*b2<F<1,EU#R<1#VC[5#*b2<F<1,EU#a,X:-2,#'aCC[#*b=2<F<1,EU#R<1#SKH#'3.??:EU#J:E:b#)7XX:E#J.E:#5,<?:EU#a,:WE./0#5,0#5,<?:EU#D:1:EX.-1#JE<2=1,E#JE723#GcTA@1:E#S[#1,/#5,GX,A#JE<.-:EU#>.00./@#Z[[[#-X#d,E3-.e1U#JE723@U#JE<.-:E@U#'W,8#*67.89:/1#f#J,,-@!"#$%&'()*+$,-%.$),/%011$1%23)456###

#####$

!"#

James G. Murphy Inc.Commercial & Industrial Auctioneers

18226 68th Ave NE, Kenmore, WA 980281.800.426.3008 - 425.486.1246

murphyauction.com

PUBLIC AUCTION2'&3$4&5'-6*'$4*77

!123456$7411

!"##$%&'$"($)##*+,'",-.$/'&!0*'-

!"#$%!%$&$'##(##!"#)*'*)+*'

/48$149:$2;$<48$25145:$=4>?$MurphyLIVE!

'<G9.--#*67.89:/14#),--./0#'1,23

K[<9#=#J7:@?<A#=#B7/:#CHDE:F.:G#H=I4#$,/?<A4#B7/:#CY#,E#XA#N88,./19:/1

;ZZV#'#$<E2W#D,./1#)?N/<2,E1:@4#>N

)"55%!^#'J"RaO#R<1# ;ZC^4# ;ZZM4# ;ZZR4# ;C[#)7XX:E# J.E:# 5,0#5,<?:E@U#R<1# CC;#RE<G-:E# 5,0#5,<?:EU#R<1#;H[\4#;C[#>W::-#5,<?:E@U#R<1#CKZ\#'3.?#'1::E#5,<?:EU#R<1#V[Y4#a,9<1@7#*b2<F<1,E@U#R<1#KH4[[[4#Z[[[#-X#d,E3-.e1@U#$72W#$,E:$%55#*g&%D$*!JO#'<-:9#CKh#)./04#$,EX<E3#),@@:E#T:<?#M:X<E3:E@U#R71,ee#'<G@U#'<-:9#JG./#+:E1.2<-# '<G@U# M,7X-:# R71# \</?9.--# U# R<EE.<0:U# '1://:E4# DE:@2,114# \<3:E# ):@<G@U# PVQ# *?0:E@U#RW.88:EU# #RW.8#\./U#5,0#M:23@U#JE</@e:E@U#R,/F:A,E@U#$.--#*-:21E.2@U#d.-./0#f#^E./?./0#),,9U#'W,8#*67.89:/1#f#J,,-@U#$,1,E@U#TA?E<7-.2@U#$72W#$,E:###

#####$


SALES MANAGERS & AUCTIONEERSBridgeport, NY Phone: (315) 633-2944, Fax: (315) 633 -8010 www.lyonauction.com

COMPLETE LIQUIDATIONAUCTION

Thorndike & Sons - Late Model Sawmill, Rolling Stock and Sawmill Equipment.

ALEX LYON & SON

HILITES: 3 RUBBER TIRED LOADERS: Cat 936E, (2) JD 644E, LOG LOADER: Prentice 210C, LOG TRUCK: 1989 Mack,YARD TRAILER, SAWMILL & SAWMILL EQUIPMENT: Morbark Mor-Pac #CC65 & CC66 Automatic Mill, Cardinal Log Turner, Line #1: Cardinal Carriage Sunstrand Drive OilGear Controls- 75hp Hydr. unit – Top Saw 36in. Circular w/ 30hp motor, Bottom Saw 39in. Circular w/ 125hp motor, Silvatech Set Controller PLC on Carriage, Line #2: Cardinal Car-riage Sunstrand Drive Oil Gear Controls -75hp Hydr. unit – Top Saw 36in. Circular w/ 30hp motor, Bottom Saw 49in. Circular w/ 125hp motor, Silvatech Set Controller: PLC on Car-riage, Silvatech Set Controller PLC on 6x36 Edger, McGehee Sanborn 6in. x 60in. Top arbor Combo Edger, Grizzly G0504 16in. Horizontal Band Resaw Morbark Chip-PacModel 58 w/ 6 knives – 300hp drive, Morbark 22in. Vibrating Conveyor w/ 10hp Drive, Carbotech Chip Screen, Phelps Chip Screen Sawdust Blower, Phelps Chip Blower ChipScreen to Bin, Phelps Sawdust Blower Model 40, FSH Vibrating Conveyor Webster Industries: 18/27 W x 9 D x 42ft. L, Timberland Machinery Horizontal Bandsaw, LOG-GING EQUIPMENT: ProPac PPS500 Slasher, Hood Loader & Slasher Equipment Co. w/ knuckleboom loader and Rotec grapple, Debarker Infeed Drag Chain Conveyor,Nicholson A6 36in. Debarker – 25hp hydr. unit – 25hp infeed – 75hp ring, CONVEYORS: Cardinal Vibrating Conveyor, Waste Conveyor, Bark Conveyor from Debarker, (2) Sawdust

Conveyors, Sawdust Transfer Conveyor, Debarker Discharge Belt, SCALE: Mettler Toledo, BUILDINGS: Sawmill Office Garage w/ Rear Warehouse, Chip & Storage Building, Bark & Sawdust Storage Building, Maintenance Building.

MAINE AUCTIONEER LICENSE #: AN1316 Jack H. Lyon

STRONG, MAINE

SATURDAY, JUNE 17 @ 10:00 AM

Address: 40 Chandler Rd., Strong, ME 04983. SITE PHONE: (401) 258-4850 We shall not be held liable for any typographical errors or inaccuracies in the content of this adv.

NOTE: After having purchased this fine mill from the Irving Group, this well-maintained operation will be sold at auction.

2002 JD 435 Knuckleboom Log LoaderItem ID: 12215Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

Clark 664D Cable SkidderItem ID: 12221Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

‘94 Timberjack 230A Cable SkidderEngine rebuilt


www.LBXonline.com

16’ live deck, Cuts & splits up to 3 cords/hour, This machine was a demo unit and has very low hours. Also includes a partial factory warranty - Item ID-12013 - Michelle 800-315-9950 x603Woodeater Firewood processor - Mid 80’s year model. Is semi automatic, has live deck, automated feed chain, has 26 inch bar, 404 chain, 28 Hp Kubota diesel motor runs great rugged machine. Does not include a conveyor. Price: 19,000 USD - Item ID-12158 - Michelle 800-315-9950 x603

FORKLIFTS

1985 Cat 8000# Forklift - 1985 year, V80E type d. Axle repaired and transmission fixed. Price: 7,000 USD - Item ID-12124 - Michelle 800-315-9950 x6031995 Nissan Forklift - 15,500lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID-11892 - Michelle 800-315-9950 x6031998 Gradall 534D Shooting Boom Forklift; Cummins Diesel; Hydrostatic Transmission w/

shuttle shift; Body- good, 40ft Boom, Forks Attached, Auto Leveling, Aux hyd; Glass- good; Tires- 13.00-24 2@50%, 2@65% (foam filled); Color - Blue - Item ID-12227 - Tom 800-315-9950 x6042000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938,

S/N: F006D05789X - Item ID-11893 - Michelle 800-315-9950 x6032004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x604Case 586C Forklift - Forklift with good rubber, good brakes and runs good. Has side shift. 1982 year model. Case 4-cylinder. ITEM IS SOLD!!!! - Item ID-11457 - Michelle 800-315-9950 x603

GENERATORS350 KVA Cummins - Genset with 9000 hours. - Item ID-11994 - Michelle 800-315-9950 x603NEW 2007 Ingersol Rand Lightsource Light Tower - Never Sold. Demo hours only! FLOODLIGHTS - Four 1,000 watt metal halide lamps designed for large area coverage - Aluminum reflector housings and tempered impact-resistant glass lenses - Weather-resistant, twist-lock connections for attaching floodlights ENGINE - Dependable Kubota power - Automatic protective shutdowns for high engine coolant temperature and low engine oil pressure


EQUIPMENTVolvo L60F Articulate Loader, • hi-tip bucket, 6 ½ yd. regular rock bucket, 5 ft. forks2001 Yale Forklift, electric, model • 0S030ECN24TEO95National battery charger MC025, • 24V1969 CAT D8-H Dozer, very good • IH TD-9 Dozer, 6-way blade and • winch CAT 112 Motor grader • Hyster 20,000 lb. Forklift, 8 ft. • forks 1994 Franklin Skidder, model 170, • Cummins 6B motorHand pallet forks• Ingersoll-Rand 10hp air compres-• sorSAWMILL EQUIPMENTCrosby Flat Edger, 32”, 3-saw• 30 ft. Live Rolls• 25 ft. 4-Strand Log Deck w/stop • and load15 ft. Roof Top Green Chain•

SAWMILL EQUIPMENT AUCTION

LocationIn Moberly:

4-Strand Unscrambler• 25 ft. 3-Strand Green Chain • 8 ft. Prescott Band Mill• 150 hp Electric Motor and other • motors to sell separatelyNewman K-20 Trim Saw• Meadows #2 3430-65 Hand Saw-• millMobile Dimension Sawmill, Volk-• swagon engine, on trailer

FILE SHOPSimonds Auto Bench, 2004, #04-• 980-154Armstrong 6-16 Roller Tensioner, • #16405Armstrong Grinder, #6 RH• File and Clamp Stands• Hatchet A-230 RH, plus File and • Clamp StandsMcDonough Mfg. Band Saw Guide • Grinder, Serial #BDM-219Armstrong Auto Swage• 2-Hand Swages• Armstrong 6900 Shaper• JR E-212CS Swage•

TRUCKS1995 IH 60 Series Spotter Truck w/• hyd. fifth wheel, Detroit 350 HP 1993 IH 9300 Eagle 60 Series, De-• troit 470 HP 1973 Mack Single Axle Dump • Truck, log trailer (handmade, no title)

COLLECTOR CARS1936 Ford Street Rod, 302 fuel in-• jected engine, power windows, AC1946 Ford Sedan, 4-doors, runs•

PICKUPS1994 Ford Step-side Conversion • Pickup 1993 Ford F150, 302, 4-WD•

FARM MACHINERYJD 2010 Tractor w/loader• Hesston #5800 Big Round Baler• 3 pt., 6 ft. Brush Hog • AC 3-BTM Plow•

MISCELLANEOUSPEPSI Machine, Pellet Wood • Stove, Hand Tools, Other Items

No Buyer’s PremiumDON’T BE LATE!!Terms: Cash or Check (Photo ID required)

Raye’s Lunch WagonAnnouncements day of auction take precedence over all advertising.Jack & Annie McKenney, Sellers

Col. James L. Johnston, CAILicensed Auctioneer & Real Estate Broker

Call Toll Free (800) 404-3400

Office: (660) 291-5921 Cell: (573) 473-4904

www.jamesjohnstonauction.com

TOWER - Telescoping mast, with 360-degree rotation and position lock - Extends 12’ to 30’ with dual, hand-operated winches and patented automatic safety brake - Mast retracts and stows horizontally for travel - Patented tower locking system to prevent telescoping during travel - Able to stand up to 65-mph wind speed with outriggers extended and jacks down - Combination hitch with 3” pintle eye and 2” ball hitch (LightSourceô) - Item ID-12245 - Tom 800-315-9950 x604

KNIFE GRINDERSHanchett Circular saw grinder This circular saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 - Michelle 800-315-9950 x603Schneider Pattern Knife Grinder - Schneider Pattern Knife Grinder - Item ID-11743 - Michelle 800-315-9950 x603

LOGGING EQUIPMENT1961 Caterpillar 944 Wheel Loader, Tire, Brakes, Bucket all are in good shape, Machine is Ready to work Serial #43A1589 - Item ID-12156 - Daren 800-315-9950 x6031974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers, Detroit engine, mounted on IH truck, with Barko 42 grapple Price: 15,500 USD - Item ID-11979 - Daren 800-315-9950 x6031975 Ford 6500 Front Loader - 1975 6500 Series Ford Industrial Tractor with 256 cid. ford diesel engine & hydrostatic transmission 3 speeds fwd & 1 reverse. Tires at 25%. Strong machine with high capacity for lifting or pushing. Has (4) 1000 lb. ctwts. Could have backhoe added. Loader bucket is 3 FT by 8 FT. Weighs about 25,000 lbs. Decent tractor but needs new block which can be bought for $2800 from dealer. - Item ID-12200 - Tom 800-315-9950 x6041976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; Pulls good. - Item ID-12249 - Tom 800-315-9950 x6041977 (est) JD 540A Cable Skidder - Nice little unit that still runs well. 28L tires at 35%. JD engine. Hour meter not working. - Item ID-12199 - Tom 800-315-9950 x6041978 CAT 518 Grapple Skidder - 23.1x26 Tires, tires 40%, Gearmatic Winch & Esco Grapple, Center Pins are tight Price: 22,000 USD - Item ID-11800 - Daren 800-315-9950 x6031979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer


800-243-5438

Multitek Firewood TumblerADD VALUE TO YOUR FIREWOOD

The all new Multitek firewood tumbler is by far the most e!cient method of separating debris and fines from your firewood product.

"e tumbler can be run in-line with your firewood conveyor and clean debris immediately as you process firewood, or set the tumbler up to screen your firewood prior to your packaging line or delivery truck.Add value to your product by not delivering debris to your customers and then turn the scrap into other value added products such as mulch! "e Multitek tumbler can be operated o# of any hydraulic firewood processor or set up to run o# electricity or gas.

ALL NEW

Made in the U.S.A.

CHECK US OUT ON FACEBOOK & YOUTUBE

Optional Equipment:High lift kit (discharge height of 13’)15’ Discharge Conveyor (discharge height of 17’)Radial stacking discharge conveyors

See us online at—www.multitekinc.com


When You Buy Your Circular Saws From B.H. PayneYou’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw• Saws manufactured from only the Highest Quality Nickel Alloy Steel.• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc.P.O. Box 90608East Point, GA 30364404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

CAT 518 Grapple Winch SkidderItem ID: 12202Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.com

1997 Timber-jack 608F Feller Buncherw/Rolly Processing HeadItem ID: 12223Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.com

blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 - Tom 800-315-9950 x6041980 DEERE 540B Grapple skidder, Swinging Grapple, winch, front tires are 70% and rears are 85% or better, new batteries and a new seat. - Item ID-12010 - Daren 800-315-9950 x6031982 540B Grapple Skidder, New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission. Pictures are coming soon Price: 23,000 USD - Item ID-11569 - Daren 800-315-9950 x6031984 DEERE 540B cable skidder, New 23x126 tires on rear. 8000 hrs Price: 18,000 USD - Item ID-11875 - Daren 800-315-9950 x6031984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 - Tom 800-315-9950

x6041986 Peterson Portable Flail Debarker - Excellent Condition. 4600 hours. Cummins 6 cylinder engine. Ready to work. CA - Item ID-12187 - Tom 800-315-9950 x6041987 Cat 988 Loader with Forks - 27,000 hours. Fair Condition. Big capacity. - Item ID-12186 - Tom 800-315-9950 x6041987 FORD L9000, TWO BUNK OR 4 SETS OF BOSTERS, 366,000 mile, vin#A55219 tri axle, Cat 3406 diesel engine, 8LL transmission and 370 rears, prentice 120c Price: 29,000 USD - Item ID-11844 - Daren 800-315-9950 x6031988 DEERE 648D - Front tire are 70% rear are 50%, Machine runs good Price: 15,500 USD - Item ID-11432 - Daren 800-315-9950 x6031988 FORD L9000, 425 hp Caterpillar engine, 702,000 miles, 10 Spd transmission, air ride suspension, with a Prentice knuckleboom loader Price: 22,000 USD - Item ID-11846 - Daren 800-315-9950 x6031988 John Deere 548D Grapple Skidder, approx. 10,000 hours, 28/26 tires, center pins are tight, machine is dry, $2000 upgrade has been done to the blade. Machine is located in the southeast. Feel free to see the video at: http://www.youtube.com/watch?v=3S3_rN6dh1I - Item ID-12209 - Daren 800-315-9950 x6031989 CAT D5H TSK - 1989 CAT D5H TSK, WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way - Item ID-12029 - Daren 800-315-9950 x6031989 Clark 666 Dual arch grapple skidder - 1989 Clark 666 Dual arch grapple skidder, The machine has a new cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! - Item ID-12219 - Daren 800-315-9950 x6031990 John Deere 640D Grapple Skidder, Single arch, Esco grapple, 30.5-32 tires. - Item ID-12214 - Daren 800-315-9950 x6031991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals.


Notch It Your Way.Choose the Baker Notcher That Fits Your Business.

Double NotcherSingle NotcherBantam Notcher

www.logtolumber.com (800) 548-6914

· 10-hp electric motor ·· Notches 400 stringers/hour ·

· Can corner-clip boards ·Optional NailBuster® indexible

inserts for notching recycled stringers

· 20-hp electric motor ·· Notches 750 stringers/hour ·

Chamfers up to 350 boards/hour with optional chamfering attachment

· Two 30-hp electric motors ·· Notches up to 4,000 stringers/hour ·

· Hand cranks for cutter head positioning ·Optional Unscrambler infeed ensures quick feeding of stringers and highest production

eMail: [email protected] Phone: (573) 663-7711 or call toll-free:

Single NotcherBantam Notcher

2009 Doppstadt DW3060K Buffalo Low-speed ShredderItem ID: 12206Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2001 Prentice 384 Knuckleboom Log LoaderItem ID: 12212Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

2001 Metavic Forwarder Model 1400 LoaderItem ID: 12192Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

- Item ID-11832 - Michelle 800-315-9950 x6031991 Hydro Ax 221 - hour meter broken good tread good running condition includes bush hog attachment - Item ID-11769 - Michelle 800-315-9950 x6031991 Hydro Ax 221 John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab with heat and air

- Item ID-11770 - Michelle 800-315-9950 x6031991 John Deere 548D Grapple Skidder with winch, machine is tight and ready to work - Item ID-12208 - Daren 800-315-9950 x6031992 Ford L8000 with a 1996 Series XL235E Log Loader - 1992 Ford L8000, Serial # 1FDYW82A8NVA07578, TK Body Style, 307,000 miles, 225 hp, 7

speed Transmission, a/c, 410 gear ratio, hendrickson suspension 1996 Series XL235E Log Loader, new complete engine, 116 hp, 42” Log Grapple, - Item ID-12025 - Daren 800-315-9950 x6031992 Linkbelt LS 4300 Log Loader - No Hour reading. Runs well. S/N 43OU25351; Isuzu Motor Young Live Heel Boom & Grapple; Elevated Tilt Cab; - Item ID-12251 - Tom 800-315-9950 x6041992 Prentice 180D Log Loader with Cummins engine mounted

on Pitts Trailer. Good condition with 7,700 hours Price: 23,000 USD - Item ID-11434 - Daren 800-315-9950 x6031993 Fiat FD 7 Dozer - Fiat FD 7; 1993, 4200 hours, 70% U//C left, SALT tracks, Hyster winch and log arch, six way blade. Good machine. Runs well. Starts excellent. Serial number D7A1T 251660 - Item ID-12238 - Tom 800-315-9950 x6041993 FREIGHTLINER FLD12064ST, Detroit 60 series engine, 425 hp, 18spd transmission, 4.10 gear ratio, Barko 80 LOADER, Reman TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking Rears. Well Maintained Truck Bed legnth 19’6”, air ride suspension Front tires 60%, new set of drives Price: 31,000 USD - Item ID-11641 - Daren 800-315-9950 x6031993 Timbco 425 - With dangle head; new under-carriage and runs great. Has all books. - Item ID-11582 - Michelle 800-315-9950 x6031994 Cat 518C Skidder - The engine was rebuilt 3 months ago. An extra Lufkin winch is included. Has 3400 size tires on it. - Item ID-11856 - Michelle 800-315-9950 x6031994 John Deere 640E Cable


www.blackstonebeaver.com

Firewood Processors

I lackstoneeaver

P: (508) 478-5902 123 Uxbridge RoadF: (508) 321-9876 Mendon, MA 01756

I lackstoneeaver

Operator comfort in enclosed cab• Dual joystick controls ease hand • fatigueComfortable, adjustable seat• Joystick controls• Engine controls inside cab•

The Blackstone Beaver Components

The Blackstone Beaver Firewood Processor is built in the USA with industry standard components. Hydraulic systems built with high quality Parker hoses and hose ends.

SizeMaximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.

CustomizationBlackstone Beavers are customizable by the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid mount.

SpeedThe processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased. When load is decreased, the high speed stroke will renew.

Featuring our exclusive split belt design stand alone

conveyer. We CUSTOMIZE any length

and option available! Call today for more

information!

(508) 478-5902

Featuring: Exclusive Split Belt, Stand Alone Conveyor

Skidder - Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front. Exellent condition. Hrs are 11,000 - Item ID-11653 - Michelle 800-315-9950 x6031994 Timberjack 230A Cable Skidder - Rebuilt Engine; 18.4x26 tires at 90%; Pulls great; Gearmatic Winch; 9200 hours, but note that hour meter runs when battery is turned on. Owner retiring. MO - Item ID-12136 - Tom 800-315-9950 x6041995 Bobcat 753 Skid Steer Loader - Excellent condition. One owner. Very well maintained. S/N 512723173. TX - Item ID-12165 - Tom 800-315-9950 x6041995 Hanover Model D3 Forwarder - 5156 Hours. Loader has great lift capacity. Tires 70% or better. Adjustable bunk extension for longer wood. New exhaust. New batteries. Strong engine and transmission. Has 8 work lights. TX - Item ID-12162 - Tom 800-315-9950 x6041995 Hydro-Ax 411E, 7236 hours, 18” Koehring Sawhead, 28L-26 Tires, 4WD, inclosed cab w/heat Price: 22,000 USD - Item ID-11673 - Daren 800-315-9950 x6031995 International 4700 Grapple Truck - 14’ Brush body, 4-1/2 ton boom, DT 466 engine, spring suspension, 239902 on the odometer. - Item ID-11883 - Michelle 800-315-9950 x6031995 International 9300 Log Truck - Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader. Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID-11502 - Michelle 800-315-9950 x6031995 JD 290D with Hytec 4700 Harvester Head - 290D in fair condition with undercarriage at 50%. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206 - Tom 800-315-9950 x6041996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800-315-9950 x6041996 BARKO 275B, 6BTA Cummins Engine, 52” Rotobec Grapple - Item ID-12076 - Daren 800-315-9950 x6031996 freightliner 120c, knuckleboom mounted behind cab, Cat 10 speed. Great for picking up logs and loading. Price: 28,000 USD - Item ID-11435 - Daren 800-315-9950 x603

1996 GMC Topkick - Includes 3126 Cat Automatic transmission. Has an Ampiroll 90L Hook Lift installed that has 12,500 pound capacity. Truck runs well. - Item ID-11101 - Michelle 800-315-9950 x6031996 John Deere 548E Grapple

Skidder - Has been repowered, 4-cylinder, new batteries, new cutting edge, 23.1x26 @ 70%,15,225 HOURS - Item ID-12236 - Daren 800-315-9950 x6031996 Timbco 445B Leveling Feller Buncher - Quadco 22’ Hot Saw: Hour meter shows 6700

hours, but owner says meter was changed. Est. hours are 13,000. Runs good. Detailed maintenance history available. Motivated Seller. 1996 Timbco 445-B w/ 22” Quadco Hot Saw 40 degree tilt, Self- leveling, 4000 hours on old meter, on new meter 6530


For Firewood Production - Take Your Pick

*Production rate may vary based upon log size, quality, power source used and operator skill.

The DYNA SC-14 OR SC-16

Packed and ready to go!

12 Years of Building Quality Machines!

toll free: 1.888.820.3962local: 231.734.4433fax: 231.734.36816228 60th Avenue, Evart, MI 49631

Both Give you High Production in an

Affordable and Profitable Processor The SC-14 (pictured) Offers

DYNA Portable Sawmills

Shell Forest Products, Harrodsburg, KY Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN Warrick Hallet 320.864.4340

PDG Sales, Medina, NY Philip Graber 585.798.2969 SC-16 Demo Model Available

North Country Hydraulics, Potsdam, NY Ben Deschaine 315.842.0388

Riehl’s Sawmill Sales, Lykens, PA Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV Bill Mollard 304.940.0749

Call the Dealer Nearest You!


EXPERTLY BUILT AND SOLD by a company you can depend on!

Progress 37’ Vibrating Conveyor

Fulghum 60” Chipper

Woodmizer 4-Head Resaw

Morbark 58” Chipper

Göeckle Knife Grinder

Morgan 2-Hd Horiz. Resaw

Montgomery Horizontal Hog

Corley Board Edger

2008 Dynamic 585 Whole Tree ChipperFactory upgrades; Customer motivated; Best Value in Market! Must see!

Item ID: 12059Contact: Tom 800.315.9950 Ext. 604www.LBXonline.com

1995 JD 290D w/Hytec 4700 Harvester HeadCustomer must sell! Great deal!


www.LBXonline.com

hours, Ser:# FT4C 811 012496, Reman pumps were installed with the new hour meter. May 2003, Rebuilt Cummins 6CTA installed at 1000 hrs. June 2004, 2 idlers installed at 1800 hrs. Dec 2004, New Berco rails, pads and sprockets installed at 3400 hrs. Apr. 2006, New updated swing bearing and house tilt pins .bushing installed at 3950 hrs. Dec. 2006, Pump drive and implement pump rebuilt at 4200 hrs. Apr. 2007, New Cat track motor installed at 4550 hrs. Sept. 2007, 3500 hr. used swing box from Fraley installed at 4800 hrs. Jan 2008, All new track rollers on right side installed at 4950 hrs. Jan 2008, New saw head tilt flange installed at 5150 hrs. Sept 2008, Used boom from Fraley installed at 5230 hrs. Sept 2008, Stick cylinder resealed at 5280 hrs. Oct 2008, Main valve resealed at 5370 hrs. Oct 2008, Injector pump rebuilt at 5890 hrs. Jan 2009, Boom cylinder resealed at 6020 hrs. Feb 2009 Shaft seals in pumps, tool cylinder resealed, and new AC pump installed at 6100 hrs. Aug 2009, New saw teeth installed at 6430 hrs. Nov 2009 Price - Item ID-12075 - Tom 800-315-9950 x604

1996 Timbco 445B Leveling Feller Buncher - T445B Timbco with a 24” Quadco hot saw. It has 34” pads. Rails and pad at 40-50%. All new rollers. Low hours on rebuilt engine. Rebuilt turn motor. All cylinders repacked. New upholstery in the interior. 80% of all hydraulic lines replaced. No leaks. Cold A/C. Sawhead has new drive spindle and all new bearings, races, and seals. New saw motor. All cylinders repacked. All new hoses. The head-swivel has been rebuilt. Serial # FT40-765-112795 Has 8,036 hours. - Item ID-12258 - Tom 800-315-9950 x6041996 Timbco 445-B w/ 22” Quadco Hot Saw 40 degree tilt, Self- leveling, 4000 hours on old meter, on new meter 6530 hours, Ser:# FT4C 811 012496, Reman pumps were installed with the new hour meter. May 2003, Rebuilt Cummins 6CTA installed at 1000 hrs. June 2004, 2 idlers installed at 1800 hrs. Dec 2004, New Berco rails, pads and sprockets installed at 3400 hrs. Apr. 2006, New updated swing bearing and house tilt pins; bushing installed at 3950 hrs. Dec. 2006, Pump drive and implement pump rebuilt at 4200 hrs. Apr. 2007,

New Cat track motor installed at 4550 hrs. Sept. 2007, 3500 hr. used swing box from Fraley installed at 4800 hrs. Jan 2008, All new track rollers on right side installed at 4950 hrs. Jan 2008, New saw head tilt flange installed at 5150 hrs. Sept 2008, Used boom from Fraley installed at 5230 hrs. Sept

2008, Stick cylinder resealed at 5280 hrs. Oct 2008, Main valve resealed at 5370 hrs. Oct 2008, Injector pump rebuilt at 5890 hrs. Jan 2009, Boom cylinder resealed at 6020 hrs. Feb 2009 Shaft seals

!""#$$%#"&!'((()**+,-./0#1*,((((


EXPERTLY BUILT AND SOLD by a company you can depend on!

Our New Shaving MillsBig Production Affordable Price!

800-241-8983FAX 706-324-0047

Our New Shaving Mills Give You Big Production at an Affordable Price!

Financing Available

Expertly built and sold by a company you can depend on.

dynamically balanced

‘86 Peterson Portable Flail DebarkerItem ID: 12187Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

2008 Prentice 2764 w/Rotary Axe Brush CutterItem ID: 12239Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

48” Precision Chip Packw/90’ vibrating conveyor

Item ID: 12128Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

in pumps, tool cylinder resealed, and new AC pump installed at 6100 hrs. Aug 2009, New saw teeth installed at 6430 hrs. Nov 2009 - Item ID-12037 - Daren 800-315-9950 x6031997 Barko 160C Knuckleboom Loader on Trailer - Nice loader. Cummins 6 Cyl engine. 8400 hours. Pitts trailer. Standard

lever controls. Rotobec 4642 continuous grapple. - Item ID-12229 - Tom 800-315-9950 x6041997 Cat 515 Skidder - Cab has A/C. Has 28L26 tires. Engine rebuilt 9 months ago. - Item ID-11857 - Michelle 800-315-9950 x6031997 CATERPILLAR D5H TSK II, 6330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C

60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50% Track Guards : Front/Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID-12012 - Daren 800-315-9950 x6031997 CLARK 666 Dixie Special, Grapple, winch, heat and air, Cummins 6BTA 6cyl engine, 177HP, 80” Grapple, Grapple

fully open is 10’ from the outside edges. This machine is in excellent condition and is a must see, it has approx. 5000 hours, center pins are in great shape, Tires are very good rears are 98% and fronts are 85%, Don’t let this machine pass you by!!! - Item ID-12137 - Daren 800-315-9950 x6031997 Husky XL235 on Mack Truck - Fair condition but runs good. Good back up loader. Standard lever controls. Clean for its’ age. Priced to sell. - Item ID-12066 - Tom 800-315-9950 x6041997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel engine; 26000 GVW. Used as yard machine. Loader runs and lift good. - Item ID-12261 - Tom 800-315-9950 x6041997 MACK CL713 with 18ft Petty built Pup trailer - 1997 Mack CL713 EZ427 replacement engine with 220k in Dec. 09, NEW! 18sp tran replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup Trailer (18.3ft).... Drive tires are at 40% and ster tires are rated at 50-60% Price: 35,000 USD - Item ID-12130 - Daren 800-315-9950 x6031997 Timbco 425C with bar saw, 75% undercarriage, 8.3 Cummins engine, Leveling Cab, new rails,


REAL TUFF BALER&BAGGERTM

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 • Brownwood, Texas 76804www.realtuffbaler.com

$14,907

BUILT TO LAST

Save $$$ on Bedding—Bale it Yourself!

Electric or Diesel, Manual or Automatic

Real Tuff Baler Dimensions & Specifications- (2) Hydraulic Cylinders are controlled by

using a two spool valve

- 30 H.P. motor (220/440 volt 3 phase) starter not included

- 25 G.P.M. Pump

- 50 Gallon reservoir capacity

- Only the highest quality industrial com-ponents are used

Effective May 1, 2011

2006 Morbark Hurricane 18 ChipperItem ID: 12240Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Gafner Iron Mule Skidder ForwarderItem ID: 12222Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

Early 70s C4 Treefarmer Cable SkidderItem ID: 12193Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.com

9700 hours, Machine is dry and ready to work - Item ID-12204 - Daren 800-315-9950 x6031997 Timberjack 608F Feller Buncher w/ Rolly Processing head Model R24B, 6227.4 hours, 24” pads, Track slides, 8 rollers, Cold a/c. - Item ID-12223 - Daren 800-315-9950 x6031998 Barko 160C Loader with Slasher - 7749hrs; Pitts trailer; 6.8 Powertech John Deere engine; CSI saw with 17’ deck. Strong Loader. Lever Controls. Runs well. - Item ID-12197 - Tom 800-315-9950 x6041998 Barko 160D Loader, s/n 22409 6cyl Cummins engine, Lever controls, Continuous rotation grapple. Trailer and delimber are not included - Item ID-12207 - Daren 800-315-9950 x6031998 Freightliner FLD12084sd Log Truck with 2004 Hood 7000 Loader - Truck, Less than 15,000 miles on complete engine overhaul, Tires are in good shape front and rear, 2004 Hood 7000 Loader, 3-stage pump, 22 foot boom with bypass grapple, Pup Trailer is for sale as well. - Item ID-12235 - Daren 800-315-9950 x6031998 Komatsu GD650-A Motor Grader - 11,000 hours. Good condition. Comfort Cab with Heat/AC. 14’ MB; Ripper package.

S/N C004848. Excellent Value. - Item ID-12255 - Tom 800-315-9950 x6041998 PRENTICE 310E, Machine is ready to work, overall condition ”GOOD” - Item ID-12033 - Daren 800-315-9950 x6031998 PRENTICE 620 WITH DENNHARCO DHT550 COMPUTERIZED MEASURING-TOPSAW-BUTT SAW-FORESTRY CAB and 8,540 hours Price: 65,000 USD - Item ID-11888 - Daren 800-315-9950 x6031998 Tigercat 240 Tracked Loader - 9550 Hours. 32’ Reach.

Rotobec continuous grapple. Strong Machine. Works well. New Cummins 6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. - Item ID-12242 - Tom 800-315-9950 x6041999 BELL TF120B Feller Bunchers, one owner machine, it is on D5 cat tracks, Hours not known; meter not working. Price: 60,000 USD - Item ID-11480 - Daren 800-315-9950 x6031999 CAT 330 with Bucket & Thumb - Estimated 4500 hours. 40% undercarriage. Final Drives

and Drive Motors just replaced. 42” Bucket with Fixed Thumb and Stump Ripper. S/N 6BR03006. Some cosmetic damage. Engine runs good. Cab clean with working AC and heat. - Item ID-12250 - Tom 800-315-9950 x6041999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save Your

Stubs & Pieces!➨

2005 Prentice Model 410E w/TMS PackageSuper Clean!


www.LBXonline.com

‘04 Prentice 384 TMS Loader Pkg.Item ID: 12171Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

1993 Fiat FD 7 DozerOwner ready to sell!


www.LBXonline.com

‘97 Barko 160C Knuckleboom Loader on Trailer

Item ID: 12229Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6041999 Hydro-Ax 611 EX, Cummins (Recon) DR1477RX SN: 60301916 HP: 215 CYLINDERS: 6 HOURS on new engine: 7613 total hours, AIR CONDITIONING, PAINT: Fair, BODY: Good GLASS: Fair, tire size 67 x 34.00-26 CONDITION: All good, Hydro-Ac side cut head. - Item ID-12195 - Daren 800-315-9950 x603

1999 Prentice 410E Loader with CTR Delimber, 5166 hours, The paint is in fair condition all around, The glass inside the cab is missing from the sliding glass window, and also the glass in the door is cracked. The interior is in poor condition, the majority of the problem being the windows. - Item ID-12191 - Daren 800-315-9950 x6031999 Prentice 620 Harvester - Ponsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value. Quebec,

Canada - Item ID-12134 - Tom 800-315-9950 x6041999 Tigercat 720B Feller Buncher, 5600 actual hours, Machine has new (crate) engine from Cummins with Machine has new (crate) engine from Cummins with 1293 hours on it. Very good running machine. All Pins & Bushings Tight. Machine operated very well. A/C very cold. Machine is in Alabama - Item ID-12181 - Daren 800-315-9950 x6032000 Daewoo with Denharco DM3500 stroke delimber, this is a bank repo an is open to offers

- Item ID-12026 - Daren 800-315-9950 x6032000 Kenworth Model T-800 Log Truck - Cat 3406 550 horse engine; 100,000 miles on rebuilt engine; Truck has 383,178 miles; Eaton 18 speed Transmission; Hendrickson Walking Beam; 40,000 lb rear ends; 4.63 Ratio; Vulcan Scales; 1986 General Log Trailer; Aluminum rims on truck; Tire Size11-24.5 - Item ID-12243 - Tom 800-315-9950 x604Morbark 3036 New $30,000 upgrade done by factory including HD drum, new belts,


FAX TO:

[email protected]

Standard 404 Pitch Saw Chain, with 3/8 Kerf

Automatic Chain Oiler UL Approved, Wired to NEMA Standards

WE ALSO OFFER THE FOLLOWING:Spare Sawbar (all types) and Repair Center for All Used Bars

SERING SAWMILL MACHINERY CO., INC.(360) 687-2667 Phone (360) 687-2917 Fax

[email protected]

bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!! - Item ID-11804 - Michelle 800-315-9950 x6032001 CAT D5H TSK II, 8,102 hours, Cab with A/C, Six Way Blade, Fixed Esco 120” Grapple w/Winch, U/C 85%, rebuilt transmission - Item ID-12083 - Daren 800-315-9950 x6032001 metavic forwarder model 1400 loader, 13hp honda, winch,4 sets of bunks, float tires, runs/works good, no elect start and steps are bent. Can Haul approx. 1 1/2 cords of wood at a time. 18” of ground clearance, Bunks are 4’ tall Model 1400, Boom length: 14’, total height 84”, total width 48”, boom rotation 270 deg., Brapple rotation: Continuous, lift capacity: 2000lbs, total weight 3225lbs. - Item ID-12192 - Daren 800-315-9950 x6032001 Prentice 384 Knuckleboom Log Loader, Cummins 6BT 5.9L engine, joystick control, enclosed cab, delimber, saw package hook ups. - Item ID-12212 - Daren 800-315-9950 x6032001 Rebuilt Keto Processing Head Model C8T020 - 2001 Keto 800 series processing head totally rebuilt less than 1000 hours ago. Customer must sell. Good condition. Missing some computer components. - Item ID-12230 - Tom 800-315-9950 x6042001 Timberjack 360D Cable Skidder - 7600 HRS; John Deer 6-cyl engine; Similar to JD 548. Good condition. Runs strong. Chains on all 4 tires. Rubber about 30%. Enclosed cab. Quebec, Canada - Item ID-12135 - Tom 800-315-9950 x6042002 John Deere 435 Knuckleboom Log Loader,

Joystick control, saw package hookups, delimber. - Item ID-12215 - Daren 800-315-9950 x6032002 John Deere 648GIII Dual Function Grapple Skidder, 9700 total hours, 3000 on Reman. engine, Reman. transmission 6000 hrs. 30.5x32 tires at 60%. MAchine is working daily. - Item ID-12231 - Daren 800-315-9950 x6032002 Timberjack 608s with hot saw, approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Daren 800-315-9950 x6032003 Cat 525B S/A Skidder - Good condition. 10,500 hours. New Transmission. Recent work done. Runs well. CA - Item ID-12189 - Tom 800-315-9950 x6042003 Fabtek 344B Forwarder - 9800 hours, tires 70%, extenda boom, two sets of chains. Very good condition. - Item ID-12247 - Tom 800-315-9950 x6042003 Morgan 2-Saw Trimsaw, this machine was bought new and never was really used, less than 50 hours if that, machine has never been painted it wwas just not used. Price: 9,000 USD - Item ID-11904 - Daren 800-315-9950 x6032003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump; New tires. Excellent condition; Great Value. Perfect for long hauls or handling big loads. Rear bogey tracks included. - Item ID-12254 - Tom 800-315-9950 x6042004 72” CSI R72 Circle Saw - Year model 2004, hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price: 17,000 USD - Item ID-12125 -

Michelle 800-315-9950 x6032004 Barko 395 Knuckleboom Log Loader, Delimber, saw package hook-ups, joystick control. 5280 hours. - Item ID-12211 - Daren 800-315-9950 x6032004 Cat 950GII Front End Loader - 950G currently has 18,111 hours on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires. S/N 950GCAXR00269. Equipped

with GP bucket and having new 23” tires before sale. - Item ID-12100 - Tom 800-315-9950 x6042004 DEERE 648G III, 1420 hrs, 50% on tires, Pins are tight - Item ID-12030 - Daren 800-315-9950 x6032004 Hood 28000 Loader with hotsaw - Year model 2004; 72” hot saw; only 340 hours. - Item ID-11418 - Michelle 800-315-9950 x6032004 JD 648GIII Single Arch

Highest Production

Lowest Maintenance

GUARANTEED!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 ROGERS ROAD,PERTH ,ONTAR IO K7H 1P9CANADA

NEWGRAPPLESYSTEMNow Available!

Today!888-219-9663


‘04 Barko 395 Knuckleboom Log LoaderItem ID: 12211Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

‘99 Prentice 410E Loader w/CTR DelimberItem ID: 12191Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

Grapple Skidder - Well maintained; 8200 hours - engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller - Item ID-12067 - Tom 800-315-9950 x6042004 JD/Timberjack 608S w/Waratah 622 processing head - 5396 Hours. One owner. Rebuilt undercarriage, now at 50%. Waratah 622 can have top saw added. Good condition. Serial numbers available for both machine and head. LA - Item ID-12161 - Tom 800-315-9950 x6042004 Prentice 384 TMS Loader Package - 10,145 Hours; CTR 450 Delimber; John Deere engine. Runs good. Working on job today. Good condition. TN - Item ID-12171 - Tom 800-315-9950 x6042004 Tigercat 630C Grapple Skidder - 12,295 hours but well maintained. Center section tight. Cummins C8.3 - 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34” Tires at 40% VIN #: 6302024 NC - Item ID-12093 - Tom 800-315-9950 x6042004 Valmet 425 Ex-10 Harvester - 4700 hours: Timbco self leveling carrier with Cat D6 side frames; Long reach harvesting boom of 35’; Valmet 360 harvesting head is fast and efficient; Well maintained with service history. - Item ID-12074 - Tom 800-315-9950 x6042005 Cat D5N XL Dozer - Model D5N XL with 2,006 Hours. Full guarding package on cab. Serial #BMA17787 with 6’ VeeCo Slope Board. Triple Rippers. Fully enclosed comfort cab. Very nice machine. Priced to sell quick. CA - Item ID-12163 - Tom 800-315-9950 x6042005 JD 650J Dozer w/Winch - 3200 total machine hours, 25 hrs on complete new severe duty

bottom and complete service, and winch update by JD dealer. Optional lights package. Heater, air suspension seat. No tears in upholstery, no dents in grille. Very nice dozer. The winch update included an updated pump and gears. Pulls great! - Item ID-12120 - Tom 800-315-9950 x6042005 Prentice Model 410E w/TMS Package - 2730 Hours; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition. Well Maintained. KY - Item ID-12079 - Tom 800-315-9950 x6042006 Barko 495 Crawler Loader - 48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins bushings and engine service. 9463 hours. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. - Item ID-12102 - Tom 800-315-9950 x6042006 Barko 495 Crawler Loader - 5008 hours; Unit has 48”

hydraulic cab riser that totally folds forward for legal height transport; Undercarriage is 90% with wide 36” pads. Equipped with both delimber and bar saw hydraulic package. 32’ reach and Rotobec 48” grapple. Excellent condition for yard machine or working at set. Priced to sell. - Item ID-12103 - Tom 800-315-9950 x6042006 JD 2554 Harvester with Waratah 624 Processing Head - 6800 hours + possible 1500 when hour meter was broken; Waratah 624 Harvesting Head. Undercarriage at 25%. Great for both in woods harvesting or deck processing. On board computer working well. Good condition. Motivated Seller! Well below market price. LA. - Item ID-12087 - Tom 800-315-9950 x6042006 JD 700J Dozer with Winch - Very clean dozer with winch and low hours of 1869. Enclosed cab with comfort package. Runs strong and is priced to sell. Excellent value and worth a look.

NC - Item ID-12101 - Tom 800-315-9950 x6042006 JD 700J XLT Dozer - 1075 Hours. Excellent condition. Very well maintained. Comfort cab with air and stereo. Work light package. Undercarriage at 90%. - Item ID-12073 - Tom 800-315-9950 x6042006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday. - Item ID-12117 - Tom 800-315-9950 x6042006 Morbark Hurricane 18 w/Loader - 275 HP engine. Very clean chipper. Runs very well. 1190 hours. Easy to transport. Great value! - Item ID-12241 - Tom 800-315-9950 x6042006 PRENTICE 384 mounted on a Mack Truck, 4600 hours, has been on a yard since 2006 Price: 80,000 USD - Item ID-12008 - Daren 800-315-9950 x6032007 John Deere 335C Loader, 2000 hrs, comes with a NEW CTR Reversable Bucksaw. - Item ID-


PIPER’SSaw Shop

800 • 845 •6075

Promotional Pricing OfferSimonds Red Streak Hard Back

1-1/4” x .042 x 3/4” or 7/8”Length 13’2”

$14.27 eachTell us you saw it here!

Limited

Time

Only$14.71 each

1998 Barko 160C Loader w/SlasherItem ID: 12197Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

12234 - Daren 800-315-9950 x6032007 John Deere 700J LT Dozer - 1155 Hours; John Deere 6068 6cyl Diesel; 6 way blade, 10’ 6” blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch. VIN #: T0700JX148380; Excellent value. - Item ID-12094 - Tom 800-315-9950 x6042007 Lamtrac Model LTR6125 Mulcher - NEW TRACK MULCHER W/ MAGNUM HEAD & WARN WINCH, 14 hours. The multipurpose LTR6125 offers the possibility to install an array of attachments to fit all your needs. Easily changing from a Mulcher to a Brush Cutter, Root Rake, or Dozer Blade, the LTR 6125 can get the job done quickly and

efficiently without the hassle of having 4 machines to do one job... the LTR6125 does it all! Complete MFG Warranty included. - Item ID-12166 - Tom 800-315-9950 x6042007 Tigercat M760 Mulcher - Cat C13 TAAC Tier III engine. 415 HP. Equipped with FAE mulching Head model 500/U225C. Excellent condition. Rebuilt engine, replaced FAE rotor, replaced FAE head, new starter and batteries installed in 2009. INCLUDES: Spare Components - Radiator, fan controller computer, 12 blade fan, hydraulic, engine oil, and air filters, FAE teeth-approx. 30; FAE bolts-approx. 50; nordlock washers for FAE, FAE tool-holders, FAE drive belts, owner’s manuals, service manual, parts manual,

C13 engine manual - Item ID-12132 - Tom 800-315-9950 x604NEW 2008 ASV Posi Track RC100 skidsteer loader, has low and high flow, only 600 hours! Posi Track R-series see one in action! - Item ID-11859 - Daren 800-315-9950 x6032008 ASV PT100 with Bucket Only - Like new skid steer. No longer has mulching head, but has bucket. Mulching head can be added. Only 201 hours. Comfort cab; Perfect unit for moderate clearing applications. Priced below market. Customer ready to sell. TX - Item ID-12184 - Tom 800-315-9950 x6042008 Komatsu PC220LC-8LL - Serial Number: A87002, 1,083 hours, Jewell build 38’ boom.

Hydraulic cab riser. Exceptional Machine. Perfect for stacking on wood yard. Save thousands over new machine. - Item ID-12259 - Tom 800-315-9950 x6042008 NEW Lamtrac Model 8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III - 290HP; Rexroth Hydraulics; Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/FOPS/OPS certified cab with premium comfort package. Its ingenious four track, double articulated design enhances maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-315-9950 x6042008 Prentice 2764 w/Rotary Axe Brush Cutter - Super clean machine with only 1480 hours. Excellent condition. Great right of way maintenance machine. Comes with optional Prentice Hot Saw for tree felling. Customer must sell. - Item ID-12239 - Tom 800-315-9950 x6042008 Terex PT100 Skid Steer with Mulcher & Bucket - Customer never used. Only 38 hours. Complete package: Brush bucket with hold down arms, Forks, and Tushogg HD Mulcher. New condition. Nothing more to say. Fantastic value. Located near San Antonio, TX - Item ID-12188 - Tom 800-315-9950 x6042008 Terex TXL-400-2 Front End Loader - 5 yard capacity; Factory warranty; 747 hours; 26.5 tires; Weight 49,900 lbs; Discounted for quick sale. VT - Item ID-12114 - Tom 800-315-9950 x6042008 Timbco/Valmet 445FXL with Quadco 22” Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 3200


Authorized Dealer for:

In Stock and Available Now!New, Used and Refurbished Equipment

58” Chipper (Rebuilt by Precision with a Precision warranty!)

ALSO AVAILABLE:

Barn Sweeps

Vibrating Conveyors

Debarkers

Chip Units

Soft Start Starters

Electric Motors (New & Used)

FEATURED ITEMS:

Jeffrey 75hp Hog; Like New!

58” Morbark Chipper

6x6 Precision Screen with Cyclone

Precision 58” 6-Knife Chip Pack

Looking for Quality Sawmill Equipment—Look No More!

Winston EquipmentMark Johnson (205) 522-0519 or Dan Hogan (205) 300-8447

1998 Komatsu GD650-A Motor GraderItem ID: 12255Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

1997 (est) JD 540A Cable SkidderRuns good


Smart Bandsaw DismantlerItem ID: 11066Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

hours. Excellent condition. 28” double grousers. Leveling cab. 360 degree rotator on Quadco saw head gives great flexibility in production. Customer selling due to job changes. Great value! - Item ID-12119 - Tom 800-315-9950 x6042008 Valmet 890.3 20 Ton Forwarder - 4800 Hours. Excellent Conditon. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market! Customer ready to sell. Tires at 60%. Sisu Engine uses about 4 GPH! Front Blade. Hood Guard. One owner machine who took great care. - Item ID-12263 - Tom 800-315-9950 x6042009 NEW DOPPSTADT DW3060K BUFFALO Low Speed Shredder - Only 100 demo hours. Customer must sell below dealer cost. This low speed shredder is the top of the line in the industry. Great for reducing railroad ties, pallets, stumps, or other wood debris into useable biomass or fuel. Very low fuel consumption. Pays for itself over time. Worth a close look and avoid regular pricing! - Item ID-12248 - Tom 800-315-9950 x6042009 Tigercat E620C Grapple Skidder - Less than 1900 hours; 44” high flotation tires; Excellent condition; Seller shut down job; Save thousands over new 2011 unit. Hydrostatic drive; Strongest center section in market. You

won’t find Tigercat skidders like this on the market! - Item ID-12106 - Tom 800-315-9950 x6042011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 - Tom 800-315-9950 x604225A Timberjack Skidder - In ready to work condition. 1986 year model with a 353 Detroit engine. - Item ID-11991 - Michelle 800-315-9950 x603

230 Timberjack Forwarder - Late 70’s model forwarder. Is powered by a Detroit 353, has a Husky Brute loader, tire size is 24-5-32. Engine completely rebuilt 3000 hours ago. - Item ID-11993 - Michelle 800-315-9950 x603510 International Wheel Loader - Please call for information. Photos coming soon. - Item ID-11990 - Michelle 800-315-9950 x603Barko Knuckleboom - 2006, Model 495 Trailer Mounted, 3800 Hours,

FEC Log Pro Buck Saw Included. Like new one owner machine! - Item ID-12153 - Tom 800-315-9950 x604BMandM Triple Screener 10x14 - BM&M Triple Screener 10x14, screen sizes: 2”, º” and 1/8”, This screen is still in operation and will be removed in April of 2011. - Item ID-12205 - Daren 800-315-9950 x603Case 580 Fork Lift - Mid 70’s Fork Lift 580 Case, High Lift, Good


JOCKEY GRINDER OWNERS!!!

“EZ-SLIDE” TOOTH STOP & TOOTH REST

This Patented, Spring Loaded Design• Allows for EZ sliding of the grinding wheel to the tooth. • Eliminates the sticky divots of the old style wear plates.• Saves you time and money with better control of the sharpener and

more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

Call 1-800-582-0470 TODAY

Our sawyers say they will not go back to

the old style parts.

Joe NowakLumberjack HardwoodsMenominee, Michigan

This is one of the best innovations in our industry to

come along in years. Where was this 30 years ago?

Kevin Mueller Mueller Brothers TimberOld Monroe, Missouri

www.menomineesaw.com [email protected]

Condition Price: 3,000 USD - Item ID-11493 - Daren 800-315-9950 x603Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x603Cat 545 Grapple Skidder - 2003 year model. Please call for information. - Item ID-10996 - Michelle 800-315-9950 x603Cat 545 Grapple Skidder - 2004 year model. Call for more information. - Item ID-10997 - Michelle 800-315-9950 x603Caterpillar D4H Dozer 1903 Hours - 1993, Cat Model D4H XL, S/N 8J00374, 1903 Hours, PAT Blade, Laser Attachment, Winch, Cat 3304 Engine. Excellent Condition! - Item ID-12177 - Tom 800-315-9950 x604

Caterpillar D6R with winch, hours 8211, s/n 5LN00696 Price: 75,500 USD - Item ID-11906 - Daren 800-315-9950 x603Clark 664D Cable Skidder - Clark 664D Cable Skidder, 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603Deere 335 - 2006, Model 335, 5500 Hours, CTR 426 Delimber, Very good condition, one owner machine. - Item ID-12175 - Tom 800-315-9950 x604Eagerbeaver 20 Ton Trailer - 1987, Eagerbeaver 20 Ton Trailer, Tandem Axle, Dual Wheels, 8.25R15 Tires Good, Manual Fold Down Ramps, Very Good Condition! - Item ID-12179 - Tom 800-315-9950 x604Early 70’s c4 treefarmer cable

skidder, 353 Detroit, runs but smokes when cold, 4 speed Transmission with hi/lo and also has mechnical reverse, winch works but needs work. Tires have tread (not much) and hold air. One blade cylinder leaks but still works. - Item ID-12193 - Daren 800-315-9950 x603Franklin Skidder - 2003,Model Q70-M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 - Tom 800-315-9950 x604Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 - Michelle 800-315-9950 x603John Deere 240 - Skid Loader 52HP 1785 Hours. Excellent Condition. 12x16.5 Tires 75%

More Details Soon. THANKS FOR LOOKING. Price: 13,900 USD - Item ID-11799 - Daren 800-315-9950 x603John Deere 540B Cable Skidder 23.1-26 tires. - Item ID-12210 - Daren 800-315-9950 x603John Deere 640E Skidder - 1993 year model, 6 cylinder, powershift transmission, no leaks - Item ID-11989 - Michelle 800-315-9950 x603John Deere 648D Skidder - Has new hydraulic pumps, has winch, runs great, 8332 hours. - Item ID-11711 - Michelle 800-315-9950 x603Koehring Hot Saw - 22” head.† Very good condition. The bottom pin is 2” around and 12” long. The top pin is 2-1/2” around and 4-3/8” long. - Item ID-11469 - Michelle 800-315-9950 x603Mack Truck $38,500 - 1998, Model


SAWMILL EXCHANGENorth America's Largest Source

of Used Portable Sawmills.

Over 800 Ads:

and Much More!!

The Place to Sell Your Equipment

800-459-2148 www.sawmillexchange.com

(6 Models)

We Now Have SIX Models to

Choose From

DVDs Available

Over 20 years in Business

10', 20' and 30'

20XIWOODSMEN’S FIELD DAYS

August 19–21Boonville, New York

2006 Timber Wolf Firewood Processorw/26’ ConveyorItem ID: 12020Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

Williams 200hp Hammermill Grinder 350 HogItem ID: 12011Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.com

1961 CAT 944 Wheel LoaderItem ID: 12156Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.com

DM Mack Truck, 300 HP, 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! - Item ID-12178 - Tom 800-315-9950 x604Metavic Log Loader trailer - Log loader trailer is 2 years old, has 12’ boom with a 30” grapple. 12’ bunk, will hold 20” logs/polewood, has 6500lb winch, 110’ 5/16” cable. Price: 16,000 USD - Item ID-11362 - Daren 800-315-9950 x603MODEL 1300 SELF CONTAINED TUB GRINDER - MODEL 1300

SELF CONTAINED TUB GRINDER, CAT DIESEL ENGINE, READY TO WORK, CAB W/ A/C - Item ID-11792 - Michelle 800-315-9950 x603Morbark Tree Shear - 20” Morbark SB52 Superbuncher tree shear. - Item ID-11468 - Michelle 800-315-9950 x603Peterbilt Truck - 2000, Peterbilt Truck, Sleeper, Good running condition. - Item ID-12176 - Tom 800-315-9950 x604Prentice 210D - 1995, Model 210D Mounted On A Prentice Articulated Self Propelled Carrier,

S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable machine. - Item ID-12174 - Tom 800-315-9950 x604Prentice 490 - 2006, Model 490, Dual Arch Grapple Skidder, 8000 Hours, 30.5x32 Tires Approx. 50%, Less than 500 hours on dealer rebuilt engine. One owner machine. - Item ID-12172 - Tom 800-315-9950 x604Skylead Yarder - $40,000 in new parts. Brand new motor 300

hours ago; new turbo, injector pump, new lines, new radios, new batteries, new haulback brake, new drive chain, strawline brake, etc. In good condition. 1999 year model. - Item ID-11527 - Michelle 800-315-9950 x603Tigercat 860 Stroke Delimber - 1999 year model bought new in 2001. Excellent condition and ready to work. Delimber is a Denharco DM3500. Machine

‘07 TIGERCAT M760 MULCHERItem ID: 12132Contact: Tom800.315.9950 Ext. 604www.LBXonline.com


2006 Morbark Hurridane 18 w/LoaderItem ID: 12241Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Morbark 58 ChipperItem ID: 12082Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

Complete Reman: Precision 58” Chipper w/warrantyItem ID: 12232Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.com

is a one owner, one operator machine. - Item ID-11886 - Michelle 800-315-9950 x603Timbco 425 Feller Buncher - 1996 year model with Quadco hot saw. 40” tilt, new pump and drive motor. Great shape. - Item ID-11031 - Michelle 800-315-9950 x603Timbco Fellerbuncher - 2000, Model 425D, 8.3 Cummins Engine, approx. 7400 hours,U.C. Like

New, Timbco Bar Saw W/40 Degree Rotate with less than 500 hours on it, Leveling System And Swing System Tight. Very Good Machine, Can Be Seen Working! - Item ID-12155 - Tom 800-315-9950 x604Timberjack 380 - Dual function grapple with winch. 30.5.32 rubber. 453 Detroit diesel. - Item ID-11072 - Michelle 800-315-9950 x603Timberjack 380 Grapple Skidder - Esco grapple, 453 Detroit Engine. Engine and transmission are strong, pins are tight. 1980 Year

model. - Item ID-10950 - Michelle 800-315-9950 x603Trim All “All in One” Trim Saw Attachment - Order through Lumberman’s Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23’ to 75’ depending on model. 3 models to choose from. Optional rotating saw and swing out arm for maximum flexibility and greatest performance. Clear power lines, dead limbs, or widen

right of ways with 24” saw blade with carbide tips. - Item ID-12105 - Tom 800-315-9950 x604WANTED: Older Clark Cable or Grapple Skidders still running - If you have an older Clark Cable or Grapple Skidder that you would like to sell, please call to discuss. Prefer Cable Units of any size. - Item ID-12151 - Tom 800-315-9950 x604

LOG TURNERSLog deck headframe with Mellott chain turner. Deck is intended for a RH mill. Chain spacing as viewed from carriage Right to Left: 0”-60”-118”. Turner is at 45”. Stop & Loader and deck drive shaft are 2-7/16”. Gearmotor is 3 HP (3 phase) with #100 Roller chain drive. Unit size: Length-132” Width-77” height-64”. Sprockets are 1” wide at tooth area. 12 tooth. 2-5/8” spacing. Would work for H-78 chain. Price: 4,725 USD - Item ID-11778 - Daren 800-315-9950 x603Mellot log turner & Hydraulic system - The Mellot Log Turnner Comes With With Joystick Control Valve And Hydraulic System. Price: 3,575 USD - Item ID-11752 - Daren 800-315-9950 x603

MISCELLANEOUS2007 Monarch Dynasty Motor Home - Unbelievable package! Less than 30,000 miles! Luxury


Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

We also offer expert Sharpening Services, plus…

Gang • Edger • ScraggTrim • Split • Strob

…and just about any Custom Saws you

need to keep you cutting longer…

for less!

Welded to your lengths!

BANDSAW BLADESWe have the most popular sizes in stock & ready to

ship from major manufacturers, including…

2008 Timbco/Valmet 445FXLw/ Quadco 22” saw head Best Value in the Market!


www.LBXonline.com

Keto 800 Processing HdCustomer must sell!

Item ID: 12230Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

‘00 Daewoow/Denharco DM3500 Stroke Delimber

Item ID: 12026Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.comat its’ best. Came to seller from Bank Repo. Allison Automatic Transmission; Cummins Diesel. Surround sound entertainment with 3 TV’s! This is a top of the line motor home for a price you won’t believe. Call us for more amazing details of the features. If you want to cruise the highways; here is the way to go! NC - Item ID-12140 - Tom 800-315-9950 x604Gafner Iron Mule Skidder Forwarder, 3 cylinder Ford with stick transmission, 18.4 x 26 tires @ 40%, 4x4 - Item ID-12222 - Daren 800-315-9950 x603Milling machine - Cincinnati #2 vertical milling machine. Price: 2,375 USD - Item ID-11797 - Daren 800-315-9950 x603

MOULDERS Fukami 6 head moulder - Fukami 6 head moulder NTX-150 - Item ID-11753 - Michelle 800-315-9950 x603

PALLET MACHINERY2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. - Item ID-12108 - Daren 800-315-9950 x603Bob Hanna Double Head Pallet Notcher - Item ID-11815 - Michelle 800-315-9950 x603

Hawk Bandsaw Dismantler - Powered by a 3-phase, 15-hp electric motor. Has a 64” table. Can be a one or two-man machine. Large tires for extended blade life. Capacity is 50-80 pallets per hour. Manufactured by Saw Service & Supply Co. - Item ID-11065 - Michelle 800-315-9950 x603Mark One pallet disassembler, one-man, 62” table Mark I - Item ID-11811 - Michelle 800-315-9950 x603Pallet Chief lll auto naller Pallet Chief 3 - Item ID-11812 - Michelle 800-315-9950 x603Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 - Michelle 800-315-9950 x603Williams 200 H.P. Hammermill Grinder - Recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a

very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 - Daren 800-315-9950 x603

PLANERSComplete Planer Mill - Yates American A20, 8 knife, belt driven

with top and bottom profile; 54” McDonough Resaw; heaby motorized conveyor chain; XL ripper; Goff cleat machine; 2 double end trimmers; DeWalt radial arm saw. Includes all motors and dust collection systems. - Item ID-10994 - Michelle 800-315-9950 x603Newman 4 sided planer - This 6-3/4” x 16” capacity 4 sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9” feed rolls rather than 8”. - Item ID-11729 - Michelle 800-315-9950 x603Newman S682 two sided planer.

1996 Barko 275BItem ID: 12076Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing

SHRINK WRAP FIREWOOD/WASTEWOOD

2005 JD 650J Dozer w/WinchItem ID: 12120Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2007 Lamtrac Model LTR6125 MulcherItem ID: 12166Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘06 JD 2554 Harvester w/Waratah 624 Processing HeadItem ID: 12087Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

6”x30” capacity. 6 knife heads - 30” Width, 6” max. & 1/4” min. thickness cap., shortest stock 46” (not butted) 20” butted; manual thickness adjustment. Equipped with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7” max. cutting circle. - Sectional top chipbreaker

with 3” wide hardened steel sections, 1-1/2” max. travel. 10 HP Mechanical feed drive, variable feed speed from 50 - 150 FPM, feed system with (6) 8” dia. feed rolls, (2) top infeed rolls sectional with 2” wide segments allowing 5/16” independent yield and 1-1/2” yield of the entire roll, max. cut top 1-1/2” and 1/4” bottom. - Item ID-11747 - Michelle 800-315-9950 x603Yates American planer, 18” model

J18, 2-speeds, 3-phase, new knives, +/-.005 on the cut, ready to work! - Item ID-11860 - Daren 800-315-9950 x603

PORTABLE SAWMILLTimber Harvester Sawmill - 5600hrs runs and works great, cuts 30”wide and 21’long 30hp Deutz motor fully hydraulic mill Price: 17,500 USD - Item ID-11895 - Daren 800-315-9950 x603

RECYCLING EQUIPMENT1990 Morbark 16 whole tree chipper - 1990 Morbark 16 Chiparvestor new Cat engine

whole tree chipper with 16” diameter capcity, cab and grapple loader, grapple loader is in good condition, 1000 hours on new Cat engine, only 3500 original hours, new clutch, new belt, new bearings, needs some paint, some dents in the cage, but overall mechanically sound whole tree chipper. Price: 29,500 USD - Item ID-11863 - Daren 800-315-9950 x6031991 Haybuster IG-8 tub grinder, 1100 hrs, 2” screens, john deere diesel engine, swing hammers have been replaced, discharge belt has been recently replaced, only used to regrind bark Price: 25,000 USD - Item ID-11864 - Daren 800-315-9950 x6031993 Morbark 1200 Tub Grinder - 1993 year model; rebuilt by Morbark in 1999. Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider-longer conveyor. 9500 hrs approx. Price: 82,500 USD - Item ID-12126 - Michelle 800-315-9950 x6031993 WHO P12-63XSHD - 1993 W.H.O. P12-63XSHD, 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx. 13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-

‘08 ASV PT100 Skid Steer w/ MulcherReduced Price: Owner Ready to Sell! Has hi-flow option for mulchers.

Item ID: 12184Contact: Tom800.315.9950 Ext. 604www.LBXonline.com


Carriage Linear & Set ShaftLewis Controls “Electronics for sawmills by sawmillers”

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key OperationMore Production & Profit is Only One Call Away

For Parts, Service & Sales

Call (423) 698-0284

CARDINAL WIRELESS, Inc.5775 Park Plaza Ct.

Indianapolis, IN 46220317 577 9944 www.cardinal-wireless.com

TWO-WAY RADIOSUp to fifteen miles of loud, clear range

and NO airtime charges.

FREE shipping for minimum 3 units

GPS TRACKINGfor Truck Fleets

ASSET TRACKINGfor Construction Equipment, Generators,

Trailers and Rental Equipment

GATEGUARD®

Remote Gate Control and Radio Communication

Call today for more information:

8 0 0 - 3 3 2 - 3 2 6 8w w w . c a r d i n a l - w i r e l e s s . c o m

HEADSETSfor Hearing Protection

1995 Hanover Model D3 ForwarderItem ID: 12162Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘02 JD 648G III Dual Function Grapple SkidderItem ID: 12231Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.com

‘98 Freightliner FLD12084 SD Log Truckw/’04 Hood 7000 Loader

Item ID: 12235Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com315-9950 x6031994 Duratech HD8 8’ tub grinder, has only 204 hours on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3” and 1 7/8”), 10’ discharge conveyor, good tires, 25/16” ball hitch on trailer. original owner’s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that

it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. Price: 43,000 USD - Item ID-11861 - Daren 800-315-9950 x6031994 Haybuster HD-10 Tub Grinder, Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 - Michelle 800-315-9950 x603

1995 MORBARK 1250, Fixed Hammers, Knuckle Boom, Cab, and 36” Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter Replaced: 634. Price: 67,000 USD - Item ID-11704 - Daren 800-315-9950 x6031995 WHO P12-56 Tub Grinder - 1995 WHO P12-56 Tub Grinder, Cat 500 hp, hyd raising tub,

updated/new hammer mill, new tub floor, clean unit ready for work. Price: 54,900 USD - Item ID-11818 - Daren 800-315-9950 x6031996 Morbark 2400 Chipper - Twin Disc Clutch, New Paint and Decals, Panels in Great shape, Pintle Hitch, New Knives, 12X16.5 Tires Price: 18,900 USD - Item ID-11879 - Daren 800-315-9950 x6031999 CBI Model 4800 Grinder

1998 Barko 160D LoaderItem ID: 12207Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com


Why?Why?We use only the highest quality nickel alloy steel • NEW• state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and • manufacturing experience

Proudly made in the • USAStock to 10 days on standard sizes• Nations largest distributor/manufacturer of saws • and knives

www.usblades.net

CALL 800-862-4544Locations in

Hampden, ME Meridian, MS Florence, SC West Monroe, LA

- 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6042000 Morbark 30/36 - Morbark 3036 New $30,000 upgrade done by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!! - Item ID-11804 - Michelle 800-315-9950 x6032002 Brush Bandit 250 12” capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/- hours on new engine, 1260+/- hours on frame, upper feed wheel hydraulic lift, work ready! - Item ID-11835 - Michelle 800-315-9950 x6032003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Michelle 800-315-9950 x6032003 PETERBILT 379 with Box and new Serco 8500 - VIN: 2XP5D89X13M591354; CAT 475 HP Diesel; 540,000 miles. Air Trac Suspension; Aluminum Wheels; 24.5 Tires; Truck in excellent condition. Double Frame. Has new box and new Serco 8500 loader. Perfect for storm or FEMA cleanup. Customer will sell separately. AR - Item ID-12112 - Tom 800-315-9950 x6042003 Rotochopper CP118 Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour Price: 40,000 USD - Item ID-11973 - Daren 800-315-9950 x6032004 BANDIT 3680 Beast Horizontal Grinder, approx. 4500 hrs., working Daily Price: 145,000 USD - Item ID-11819 - Daren 800-315-9950 x6032004 Bandit Beast - Powered by a V12 800-hp Cat diesel engine. 2300 hours. Photos coming soon. - Item ID-11233 - Michelle 800-315-9950 x6032004 Morbark N-viro Mulch 2000 - 1994 year model. Powered by a 21-hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. - Item ID-12109 - Daren 800-315-9950 x6032006 Morbark Hurricane 18 Chipper - Super clean chipper. 1050 hours. Strong engine. Great condition. Ready to go to work! - Item ID-12240 - Tom 800-315-9950 x6042006 Morbark Hurricane 18 w/Loader - 275 HP engine. Very clean chipper. Runs very well. 1190 hours. Easy to transport. Great value! - Item ID-12241 - Tom 800-315-9950 x604Dura Tech HD-8 Tub Grinder - Haybuster tub grinder, 8’ opening on tub, 16” x 10’ discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hours. New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID-11803 - Michelle 800-315-9950 x603Duratech HD12, 12’ tub grinder - great running tub grinder with brand new mill, new clutch pak, new tub ring, only 100 hours on rebuilt Cat engine 460 horsepower, swing hammers, hydraulic tilt tub, 5 sets of screens included 1”, 2”, 3”, 4”, and composting screen, magnetic head pulley, 2 extra sets of hammers, includes regular tires and foam-filled tires for yard use - Item ID-11848 - Michelle 800-315-9950 x603Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine. Has 3000 hours. Magnet on the discharge. New hammermill and new belts. 2” screens. - Item ID-11320 - Michelle 800-315-9950 x603Haybuster H1000 PTO Tub Grinder - Tub has been re-inforced. Belts are almost new. Mid 80’s model. Has either 2 or 3” screen. Is 10’ wide at top of flair. TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) - Item ID-11554 - Michelle 800-315-9950 x603Haybuster IG-8 Tub Grinder - Powered by a 110-hp John Deere diesel engine. Has only 1034 hours. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 - Michelle 800-


AJD Forest ProductsPremium Kiln Dried Hardwoods

Northern Red Oak is Our SpecialtyLake States Largest Producer of Industrial Lumber

2008 Lamtrac Model 8290Q MulcherRight of way clearing; never sold; priced below cost; goes anywhere!


NEW MULCHER

Precision 58” Chip PackItem ID: 12233Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

2005 Bronco Model 2006 Pallet Mailing SystemItem ID: 12108Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

1998 Gradall Shooting Boom ForkliftItem ID: 12227Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com315-9950 x603Morbark 290 Wood Chipper - everything done and ready for spring, great machine for landscaper or a second back up machine for a small tree company....chipper has always started and chipped.....extra sharpened blades ....it has a cummins diesel engine ....88 horse power,,,,has new tires and brakes Price: 6,750 USD - Item ID-11897 - Daren 800-315-9950 x603MORBARK 58 3-knife Chipper, This machine is ready to work - Item ID-12082 - Daren 800-315-9950 x603

RESAWSMorgan band resaw has automatic return belt, 220/440, 3-phase, early 90’s model Price: 5,500 USD - Item ID-11866 - Daren 800-315-9950 x603

ROLLING STOCK1974 Peterbuilt Water Truck - Model 351; Good condition. Runs and pumps water well. - Item ID-12060 - Tom 800-315-9950 x6041983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years - windshield, paint, front rims, tires, batteries, reman transmission, conversion

to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years - main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800-315-9950 x603

SAW GRINDERS & STRETCHERSArmstrong Band grinder. - Nice #4 L.H. Armstrong Band grinder. Serial RB 6642. Air back feed. 3 Stands. Updates. Cams: 50E 4U W, 50E 4U F Price: 7,500 USD - Item ID-11777 - Daren 800-315-9950 x603

SAWMILL1992 Sanborn sawmill Mini-Max - 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power

unit, uses 6” wide saw blades, includes (10) saws. This machine has a log cleaner ahead of the saw mounted on sawmill. - Item ID-12196 - Daren 800-315-9950 x6031995 Simonds Automatic Bandsaw Leveler - 1995. Excellent Condition. Will improve cutting accuracy, filing room safety, saw life, leveling quality and filing room productivity. The paybacks from automatic leveling - less deviation, kerf reductions, and simplified saw maintenance. Price includes set up and training at your facility. Great value and a smart investment! - Item ID-12085 - Tom 800-315-9950 x6041995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick. Price

includes set up and training so you know you will be getting a great machine! - Item ID-12084 - Tom 800-315-9950 x6042001 Timber Harvester Grade Resaw System - 2001 Timber Harvester Grade Resaw System, Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 - Daren 800-315-9950 x6032005 Cooks Acu-track AC 36 Heavy Duty - Machine has 1300 hrs on it, 51 HP Perkins Diesel. Runs the band saw which has a inch and half wide band on it, 12HP Kochler Gas Motor. Powers the hydrolic controls, it comes with a De-barker/De-Mudder to save wear and tear on blades and keep them sharp, it has self log loader, and it comes with Extra Blades. Fully maintained, Oil is


Thank you for your interest in entering the 2011 Personal Best Contest. This competition is a long-standing tradition recognizing Wood-Mizer sawmill owners who cut lumber for their building projects to fulfill a dream. We are excited you are entering this year.

Good Luck!

Contest RulesHOW TO ENTE T

TEP 1 PICK PROJECT Decide on a completed project you feel is your best personal work.

TEP 2 COMPLETE FORM Complete the Official 2011 Personal Best Entry Form here or on-line at

woodmizer.com/pbest. Expand your answers and attach additional pages as necessary.

TEP 3 INCLUDE 5 PICTURES Send us at least 3 project photos along with 1 of your sawmill in action, and 1 of you (and your

family if you want!). Prints or hi-res digital photos accepted. (To ensure quality photos, set your digital camers to the highest megapixel option. For film camera, use 400 speed film.)

T MAIL or On-line All entries must be received by September 1, 2011. Mail to: Wood-Mizer Personal Best,

8180 West 10th Street, Indianapolis, IN 46214.

W T TO EXPECT WHEN OU ENTER

You will receive a FREE Wood-Mizer cap to thank you for participating.

A panel of judges will evaluate your project on creativity, originality, complexity, quality of workmanship, and overall use of your Wood-Mizer in completing the project.

All entries and written information become the property of Wood-Mizer and may be used for promotional purposes. (On-line or in print)

W T TO EXPECT IF OU WIN

You will be notified in writing by the end of October 2011.

You will be featured in a future issue of The Wood-Mizer Way magazine, included in a press release sent to national and local media contacts, and posted on www.woodmizer.com and Facebook.

Prize credits* will be placed on your Wood-Mizer account, good up to one year from date of issue.

PRIZE MON REDIT FOR TEGORI (1-8)

GRAND CHAMPION $1,250 FIRST PLACE $800 HONORABLE MENTION $500* Credits can be used towards the purchase of any Wood-MIzer products, parts or accessories. Credits have no cash value and are listed in U.S. dollars. Prize credits good for up to one year. US and Canada customers eligible to enter.

Please call 1.800.553.0182 x1277

DEADLINE FOR ALL ENTRIESSEPT 1, 2011

2001 Multitek 2020 LDSC Firewood Procw/20 ft. conveyorItem ID: 12131Contact: Daren/Michelle 800.315.9950 Ext. 603

www.LBXonline.com

2003 CAT 525B S/A SkidderItem ID: 12189Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

HMC V206 DebarkerItem ID: 12228Contact: Daren/Michelle800.315.9950 Ext. 603

www.LBXonline.com

1988 JD 548D Grapple SkidderItem ID: 12209Contact: Daren/Michelle800.315.9950 Ext. 603www.LBXonline.com

changed every 150 hrs. It will cut aprox on average 3,000 board foot a day. Price: 35,500 USD - Item ID-11902 - Daren 800-315-9950 x6032007 Cooks Portable Sawmill with portable edger - 2007 AC-36 Cooks Portable Sawmill with portable edger, 301 hours, tires are in good condition and ready to work. 51-hp diesel, setworks, mudsaw, sharpener. Edger is a Cooks 14” - Item ID-12016 - Michelle 800-315-9950 x60346” Circle Sawmill - Stationary sawmill. 30-hp 3 phase motor. Can cut logs 12-15” in diameter and 10 ft long. Mill weighs 3000 pounds. Price: $8,500 USD - Item ID-12157 - Michelle 800-315-9950 x603Complete Select Sawmill - 6” double cut bandmill. 115 hp John Deere Diesel power. Can produce 15,000 to 20,000 board feet per day.Mill does cut both ways. Mill has 1700 hours. Comes with 48 extra blades with 75% life left in them worth $10,000. purchased new by current owner. Infeed and outfeed do come with it. Can process up to a 21’ Log up to 42” in dia. Price: 75,000 USD - Item ID-12127 - Michelle 800-315-9950 x603Log Decks - The bright colored long deck is a 30’ 2 strand with stop and loader and hydraulic drive. Strand spacing is 48”. Deck is based on 5x10 tube frame. Underneath is a 14’ 2 strand deck with 80” strand spacing. There is a gear box but no motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! - Item ID-11731 - Michelle 800-315-9950 x603Lumber Transfer - 16 ft 4 strand 50 ft 4 strand Green Chain - Item ID-11669 - Michelle 800-315-9950 x603

SHAVING EQUIPMENT2006 SALSCO 30 Shaving Mill - 2006 SALSCO 30, Hour meter is


Explore EXPO 2011 for opportunities to advance your operations and gear up to win as markets recover.

August11-12,2011GeorgiaWorldCongressCenter

GearUpForSuccess

Complete show facts at sfpaexpo.com

2003 Peterbilt 379 w/Box & New Serco 8500Item ID: 12112Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2005 CAT D5N XL DozerItem ID: 12163Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

not working properly, 83 hp cat, Box is 102”x 30”, has a blower and all knives in blower are in good shape Price: 48,500 USD - Item ID-11977 - Daren 800-315-9950 x6032007 SALSCO 30 Shaving Mill with Blower - 1686 hours, 83 hp Cat Engine, Box is 120”x 30” Price: 54,500 USD - Item ID-11978 - Daren 800-315-9950 x6032009 Salsco 30 Shaving Mill - 2009 Salsco 30 in. Shaving Mill, 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID-12182 - Tom 800-315-9950 x604Shaving Mill - Shop built, set up 1 year ago. Box is 48”W x 5-1/2’L. All electric, powered a 3-phase electric motor with converter. Comes with all electrical boxes. 2 heads with 3 knives per head. Powered by a 60-hp motor. Includes deck to feed and discharge conveyor. Processes 2 truck loads per hour. Runs about $150 per month in electric use. - Item ID-11975 - Michelle 800-315-9950 x603

1996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 - Michelle 800-315-9950 x6031996 Peterbilt Model 377 - 1996 peterbilt tamdan, 22 foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain truck. 9 speed trans. 80% rubber, 475 cat engine, good truck ready to go to work. just put new shocks on front. bed sides are 60”. - Item ID-11597 - Michelle 800-315-9950 x6031997 Mack CH613 w/1997 Sta-Lite Log Loader Trailer - E7 Mack Engine 454-hp; 354,000 miles; 18-speed transmission; 12,000#

front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 Sta-Lite 45 ft x 96” log loader trailer Price: 65,500 USD - Item ID-11588 - Daren 800-315-9950 x6031998 MACK CL713 - 1998 Mack w/ a 1998 Serco Loader, 25’ Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Package, Power Divider, Heated Mirrors, AC, Cruise Control. Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission. Price: 62,000 USD - Item ID-11529 - Daren 800-315-9950 x6032000 ITI 42’ Aluminum Chip Van - 5 Total Available. Top of the line Chip Van. Some need front panel plate. Some need outside side panel. Very Good Condition. New price today is $40,000. - Item ID-12252 - Tom 800-315-9950 x6042000 Peterbuilt Logging Truck - 2000 Peterbuilt, N-14Cummins engine, 18spd., 120 Prentice loader, pup trailer. Price: $68,000 - Item ID-12159 - Michelle 800-315-9950 x6032002 MACK GRANITE CV713, 464hp, 664,500 miles, 18 spd, air ride suspension, 2002 SERCO 7500 LOADER AND 1996 ROSA PUP TIRES AND BRAKES at 80% Price: 70,000 USD - Item ID-11700 - Daren 800-315-9950 x6032003 Mack CH613 - w/E7 425 Mack engine, 9 speed, wet kit, air slide fifth wheel, air ride suspension, air conditioning. 210,000 miles. Good tires. - Item ID-11087 - Michelle 800-315-9950 x6032010 Pitts 42’ In Woods Aluminum Chip Van - 3 trailers available. All purchased the same time. Excellent Condition. Pitts 42’ Chip Van. Two axle; Seller lost contract. - Item ID-12253 - Tom 800-315-9950 x604

THE LUMBERMAN’S EXCHANGEPost Office Box 1916Columbia, Tennessee 38402

PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

New Track B66

with Transport Dolly

Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.

Electric or Diesel 150 875 Horsepower Portable, Stationary, or Track

Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.

Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376

lbx online magazine

Documents