pt-103差壓傳訊器 壓力傳訊器 · 2014-08-25 · pt-103差壓傳訊器 model summary 2 range...
TRANSCRIPT
PT-103差壓傳訊器
Model summary
2 range model- D for display- Q for square rootoutput
PT-103-1-ZW (-D -Q)PT-103-2-ZW (-D -Q)PT-103-3-ZW (-D -Q)PT-103-4-ZW (-D -Q)PT-103-5-ZW (-D -Q)PT-103-6-ZW (-D -Q)PT-103-7-ZW (-D -Q)
Accuracy %/FS **)over operation temp.-10 ~ 50°Crange 1 and range 2
± 1%± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%± 0.5%
Measuringrange 1
0 ~ 50 Pa-50 ~ 50 Pa0 ~ 100 Pa0 ~ 250 Pa0 ~ 500 Pa0 ~ 1500 Pa0 ~ 2500 Pa
Measuringrange 2
0 ~ 100 Pa-100 ~ 100 Pa0 ~ 250 Pa0 ~ 500 Pa0 ~ 1000 Pa0 ~ 2500 Pa0 ~ 5000 Pa
Long term stabilitytypical 1 year
≤ ± 3 Pa≤ ± 3 Pa≤ ± 3 Pa≤ ± 8 Pa≤ ± 8 Pa≤ ± 24 Pa≤ ± 24 Pa
4 range model- R4 for 4 measuring range- D for display- Q for square root output
PT-103-1-ZW-R4 (-D -Q)PT-103-2-ZW-R4 (-D -Q)PT-103-3-ZW-R4 (-D -Q)
Accuracy %/FS **)over operation temp.-10 ~ 50°Crange 1 ~ 4
± 0.5%± 0.5%± 0.5%
range 1
250 Pa750 Pa1250 Pa
range 2
500 Pa1250 Pa2500 Pa
range 3
750 Pa2250 Pa3750 Pa
range 4
1000 Pa3000 Pa5000 Pa
Long term stabilitytypical 1 year
≤ ± 8 Pa≤ ± 24 Pa≤ ± 24 Pa
Each device has 2 or 4 jumper selectable measuring ranges. Each device is individually temperature compensated.
**) %/FS from highest pressure range (including: general accuracy, temperature drift, linearity,hysteresis andrepetition error)
Technical data
Pressure connections
Air and non-aggressive gases
Electrical interface(2-wire)
Measuring elementBursting pressureSuitable media
Max. pressureResponse Time
32 mA4 ~ 20 mA32 mA
25 KPa0.8 / 4 s selectable by jumper
50 KPa
Max. supply current
Piezoresistive
Supply voltage
Output signalMax. output current
Maximum load
10 ~ 35 V DC
Supply-10V0.020A
ABSABSABSABS
Materials
PVC, soft
Connections2 screw terminals, max 1.5 mm2Electrical connections
CoverHousing
M16
Temperature rangeGeneral ambient conditions-10 ~ 50°C
Cable entryPressure connections
OperationStorageAmbient humidity
Duct connectorsTubing
-20 ~ 70°C0 ~ 95% RH
150 grams, with accessories 290 gramsWeight
Safety
90.0 x 71.5 x 36.0 mmDimensions
Protection standard
Conformance
IP 54Meets the requirements for CE marking: EMC directive 89/336/EECRohs Directive 2002/95/EY
Male 5.0 mm and 6.3 mm∅
4-20mA
ZERO0,1/4s5001000 4-20mA
Polarity free
Pa
71.5
95.0
90.0 36.0
壓力傳訊器
TEL:(07)643-7881 FAX:(07)643-7883 Mail:[email protected] http://www.yenchwan.com.tw/