sfe_zw.pdf
TRANSCRIPT
-
7/30/2019 SFE_ZW.pdf
1/8
MODEL ZW1R50512 ZW1R50515 ZW1R51212 ZW1R51215 ZW1R52412 ZW1R52415 ZW1R54812 ZW1R54815
MAX OUTPUT WATTAGE[W] 1.44 1.5 1.44 1.5 1.44 1.5 1.44 1.5
DC OUTPUT VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30CURRENT[A] 0.06 0.05 0.06 0.05 0.06 0.05 0.06 0.05
SPECIFICATIONSMODEL ZW1R50512 ZW1R50515 ZW1R51212 ZW1R51215 ZW1R52412 ZW1R52415 ZW1R54812 ZW1R54815
INPUT
VOLTAGE[V] 5 (4.5 - 6.0) 12 (10 - 15) 24 (20 - 30) 48 (35 - 63)
CURRENT[A] *1 0.480typ 0.500typ 0.183typ 0.192typ 0.092typ 0.096typ 0.046typ 0.048typ
EFFICIENCY[%] 60typ 60typ 65typ 65typ 65typ 65typ 65typ 65typ
OUTPUT
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.06 0.05 0.06 0.05 0.06 0.05 0.06 0.05
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
TEMPERATURE REGULATION[mV] 0 to +50C 120max 150max 120max 150max 120max 150max 120max 150max
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed
OUTPUT VOLTAGE SETTING[%] t5max (Rated input/output, Ta=25C)PROTECTIONCIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
ISOLATION
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 30minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
Output pins can be connected in series to make a 24V/30V output.
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%
*2 Measured by 20MHz oscilloscope.
* Parallel operation with other model is not possible.* The output specification is at t12V and t5V.
ZW1R5
On-board type
Z W 1R5 05 12
Ordering information
1Series name2Dual output3Output wattage4Input voltage5Output voltage
1 2 3 4 5
Z
G-128
-
7/30/2019 SFE_ZW.pdf
2/8
DERATING CURVEOVERCURRENT CHARACTERISTICS (ZW1R50512)
RISE TIME & FALL TIME (ZW1R50512)STATIC CHARACTERISTICS (ZW1R50512)
Z
G-129
ZW1R5
External view
Dimensions in mm
The converter is in contact with the
slanted area of the P.C.B. To keep
isolation, adequate wiring on the
mounted side is required.
Div.: 0.1inch
Recomended size forprocessing PCB
Outline
(TOP VIEW)
(1.25) (1.25) (1.25)
(1.25) (1.25)
(1.25)5-1.3
(22.86)
2.541.4
27.94
15.
24
2.
54
7.
62
Performance data
-
7/30/2019 SFE_ZW.pdf
3/8
MODEL ZW30512 ZW30515 ZW31212 ZW31215 ZW32412 ZW32415 ZW34812 ZW34815
MAX OUTPUT WATTAGE[W] 2.88 3.0 2.88 3.0 2.88 3.0 2.88 3.0
DC OUTPUT VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30CURRENT[A] 0.12 0.1 0.12 0.1 0.12 0.1 0.12 0.1
SPECIFICATIONSMODEL ZW30512 Z W30515 Z W31212 Z W31215 Z W32412 Z W32415 Z W34812 Z W34815
INPUT
VOLTAGE[V] 5 (4.5 - 6.0) 12 (10 - 15) 24 (20 - 30) 48 (35 - 63)
CURRENT[A] *1 0.880typ 0.920typ 0.342typ 0.358typ 0.163typ 0.171typ 0.085typ 0.090typ
EFFICIENCY[%] 65typ 65typ 70typ 70typ 74typ 74typ 70typ 70typ
OUTPUT
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.12 0.1 0.12 0.1 0.12 0.1 0.12 0.1
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
TEMPERATURE REGULATION[mV] 0 to +50C 120max 150max 120max 150max 120max 150max 120max 150max
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed
OUTPUT VOLTAGE SETTING[%] t5max (Rated input/output, Ta=25C)PROTECTIONCIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
ISOLATION
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 30minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
Output pins can be connected in series to make a 24V/30V output.
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%
*2 Measured by 20MHz oscilloscope.
* Parallel operation with other model is not possible.* The output specification is at t12V and t5V.
ZW3
On-board type
Z W 3 05 12
Ordering information
1Series name2Dual output3Output wattage4Input voltage5Output voltage
1 2 3 4 5
Z
G-130
-
7/30/2019 SFE_ZW.pdf
4/8
DERATING CURVEOVERCURRENT CHARACTERISTICS (ZW30512)
RISE TIME & FALL TIME (ZW30512)STATIC CHARACTERISTICS (ZW30512)
40
60
80
100
Z
G-131
ZW3
External view
Dimensions in mm
The converter is in contact with theslanted area of the P.C.B. To keepisolation, adequate wiring on themounted side is required. Div.: 0.1inch
Recomended size forprocessing PCB
Outline
(TOP VIEW)(1.25)
(1.25)(1.25)
(1.25) (1.25) (1.25)
5-1.3
(30.5)5.08
5.
08
5.
08
1.4
40.64
20.
321
0.
16
Performance data
-
7/30/2019 SFE_ZW.pdf
5/8
MODEL ZW60512 ZW60515 ZW61212 ZW61215 ZW62412 ZW62415 ZW64812 ZW64815
MAX OUTPUT WATTAGE[W] 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0
DC OUTPUT VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30CURRENT[A] 0.25 0.2 0.25 0.2 0.25 0.2 0.25 0.2
SPECIFICATIONSMODEL ZW60512 Z W60515 Z W61212 Z W61215 Z W62412 Z W62415 Z W64812 Z W64815
INPUT
VOLTAGE[V] 5 (4.5 - 6.0) 12 (10 - 15) 24 (20 - 30) 48 (35 - 63)
CURRENT[A] *1 1.840typ 1.840typ 0.717typ 0.717typ 0.338typ 0.338typ 0.179typ 0.179typ
EFFICIENCY[%] 65typ 65typ 70typ 70typ 74typ 74typ 70typ 70typ
OUTPUT
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.25 0.2 0.25 0.2 0.25 0.2 0.25 0.2
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
TEMPERATURE REGULATION[mV] 0 to +50C 120max 150max 120max 150max 120max 150max 120max 150max
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed
OUTPUT VOLTAGE SETTING[%] t5max (Rated input/output, Ta=25C)PROTECTIONCIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
ISOLATION
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
VIBRATION 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 30minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
Output pins can be connected in series to make a 24V/30V output.
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%
*2 Measured by 20MHz oscilloscope.
* Parallel operation with other model is not possible.* The output specification is at t12V and t5V.
ZW6
On-board type
Z W 6 05 12
Ordering information
1Series name2Dual output3Output wattage4Input voltage5Output voltage
1 2 3 4 5
Z
G-132
-
7/30/2019 SFE_ZW.pdf
6/8
DERATING CURVEOVERCURRENT CHARACTERISTICS (ZW60512)
RISE TIME & FALL TIME (ZW60512)STATIC CHARACTERISTICS (ZW60512)
Z
G-133
ZW6
External view
Dimensions in mm
The converter is in contact with theslanted area of the P.C.B. To keepisolation, adequate wiring on themounted side is required. Div.: 0.1inch
Recomended size forprocessing PCB
Outline
(TOP VIEW)(1.25) (1.25) (1.25)(1.25)
(1.25) (1.25)
5-1.3
(30.5)5.08
15.
24
15.
24
1.4
40.64
20.
32
10.1
6
Performance data
-
7/30/2019 SFE_ZW.pdf
7/8
MODEL ZW100512 ZW100515 ZW101212 ZW101215 ZW102412 ZW102415 ZW104812 ZW104815
MAX OUTPUT WATTAGE[W] 8.4 9.0 10.8 10.5 10.8 10.5 10.8 10.5
DC OUTPUT VOLTAGE[V] t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30 t12 or +24 t15 or +30CURRENT[A] 0.35 0.30 0.45 0.35 0.45 0.35 0.45 0.35
SPECIFICATIONSMODEL Z W100512 ZW100515 ZW101212 ZW101215 ZW102412 ZW102415 ZW104812 Z W104815
INPUT
VOLTAGE[V] 5 (4.5 - 6.0) 12 (10 - 15) 24 (20 - 30) 48 (35 - 63)
CURRENT[A] *1 2.340typ 2.500typ 1.125typ 1.092typ 0.563typ 0.546typ 0.281typ 0.273typ
EFFICIENCY[%] 72typ 72typ 80typ 80typ 80typ 80typ 80typ 80typ
OUTPUT
VOLTAGE[V] t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30) t12 (+24) t15 (+30)
CURRENT[A] 0.35 0.30 0.45 0.35 0.45 0.35 0.45 0.35
LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max
LOAD REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max
RIPPLE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
RIPPLE NOISE[mVp-p] *2 120max 120max 120max 120max 120max 120max 120max 120max
TEMPERATURE REGULATION[mV] 0 to +55C 120max 150max 120max 150max 120max 150max 120max 150max
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed
OUTPUT VOLTAGE SETTING[%] t5max (Rated input/output, Ta=25C)PROTECTIONCIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
ISOLATION
INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
INPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
OUTPUT-CASE AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C)
ENVIRONMENT
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +70C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 30minutes each along X, Y and Z axis
IMPACT 490.3m/s2 (50G), 11ms, once each X, Y and Z axis
Output pins can be connected in series to make a 24V/30V output.
*1 Rated input 5V, 12V, 24V or 48V DC, Io=100%
*2 Measured by 20MHz oscilloscope.
* Parallel operation with other model is not possible.* The output specification is at t12V and t5V.
ZW10
On-board type
Z W 10 05 12
Ordering information
1Series name2Dual output3Output wattage4Input voltage5Output voltage
1 2 3 4 5
Z
G-134
-
7/30/2019 SFE_ZW.pdf
8/8
DERATING CURVEOVERCURRENT CHARACTERISTICS (ZW100512)
RISE TIME & FALL TIME (ZW100512)STATIC CHARACTERISTICS (ZW100512)
Z
G 135
ZW10
External view
Recomended size forprocessing PCB
Outline
Dimensions in mm
The converter is in contact with theslanted area of the P.C.B. To keepisolation, adequate wiring on themounted side is required. Div.: 0.1inch
(TOP VIEW)
(1.25)
(1.25) (1.25)
(1.25) (1.25) (1.25)5-1.3
15.
24
(30.5)5.081.4
40.64
15.
24
20.
32
10.
16
Performance data