3300dse
TRANSCRIPT
8/7/2019 3300DSE
http://slidepdf.com/reader/full/3300dse 1/2
Trimble 3300 Total StationEconomical, easy-to-use Direct Reflex 3D measurement system
Whether you work as atopographic cadastral orconstruction surveyor, or aremeasuring to targets that aredifficult to reach, the Trimble3300 Total Station range delivershuge versatility and Direct Reflex(DR) capabilities ideal for datacapture and field computations.
DR Measurement Mode
The innovative DR EDM systemoption is ideal for surveying wherethe target is difficult, impossibleor dangerous to reach. It opensup a new world of measurementapplications. Objects that werepreviously difficult or impossibleto measure, can now be measuredas easily as those measured witha prism. Property boundaries andcorners can be measured withoutgaining land access. Overheadcables, tunnels, bridges, quarry faces, building and elevations can allbe measured quickly and easily. DR combined with the coaxial visiblespot facilitates aiming in interiorapplications making the 3300 idealfor interior survey work. This systemenables you to measure to any object within 70 m (230 ft) (Kodak Grey Card 18% reflective) and up to 100 m(328 ft) (Kodak Grey Card 90%reflective), with no need for a prism.
Rugged, Tough and Portable
The 3300DR range provides anexceptional solution to a wide range of measurement applications. Featuringa small, water-resistant and ruggedyet lightweight body, the instrumentis capable of operating for many hours on a small internal battery. Andeverything you need for a day’s work,excluding the tripod, fits into a singleand easy-to-carry case.
Key Features
nd Benefits
Direct Reflex
capability
Visible Pointing Laser
Easy to operate
Graphical Support
Rugged and
Lightweight
Versatile, compact, economical Trimble 3300 Total Station for everyday survey work
Easy to Use for
Immediate Productivity
The instrument has been designedso that even an inexperiencedoperator can be fully operational within a few minutes of startup.Time-consuming startupprocedures have been eliminated.Simply level up, switch on andbegin work. With a seven-key
control panel and a menu-drivenuser interface with softkeys, youcan immediately access all relevantfunctions.
Using the 3300, you canrapidly measure distances up to5000 m (3.1 miles) with a singlekeystroke. And for stakeout, thetracking measure mode repeatsmeasurements, providing rapidcountdown to the point required.
Data Capture and Field Computations
The 3300 is ideal as a stand-alone measuring and stakeoutinstrument. With internal memory,the instrument becomes a self-contained system with a datacollector, operating cable-freefrom the same built-in battery. Additionally, as the instrument isfitted with a bi-directional serial
communications port, it can beconnected to a range of controller’ssuch as the TSCe™ and the TDSHP48.
With many standard featuresfor today’s surveyor the Trimble3300DR Total Station is a true3D Direct Reflex measuringsystem for your projects, today andtomorrow.
8/7/2019 3300DSE
http://slidepdf.com/reader/full/3300dse 2/2
Trimble 3300 Total Station
© 2
0 0 3 ,
T r i m b l e N a v i g a t i o n L i m i t e d .
A l l r i g h t s r e s e r v
e d .
T r i m b l e i s t r a d e m a r k o f T r i m b l e N a v i g a t i o n L i m i t e d r e g i s t e r e d i n t h e U n i t e d S t a t e s P a t e n t a n d T r a d e m a r k O f f i c e .
T h e G l o b e & T r i a n g l e l o g o ,
I n t e g r a t e d S u r v e y i n g
, a n d T S C e a r e t r a d e m a r k s o f T r i m b l e N a v i g a t i o n L i m i t e d .
Angle measurement
Accuracy (Standard deviation based on DIN 18723)
3303 3" (0.9 mgon)3305/3306* 5" (1.5 mgon)
Angle reading (least count)
3303 1" (0.2 mgon)
3305/3306 1" (0.5 mgon)
Automatic level compensator Single-axis compensator ±5' (±90 mgon)Distance measurement
Accuracy Prism
Standard measurement ±(2 mm + 2 ppm) (0.007 ft + 2 ppm) Tracking ±(5 mm + 2 ppm) (0.016 ft + 2 ppm)
Reflex tape Standard measurement ±(3 mm + 2 ppm) (0.01 ft + 2 ppm)
Tracking ±(5 mm + 2 ppm) (0.016 ft + 2 ppm)
Direct reflex mode
Standard measurement ±(3 mm + 2 ppm) (0.01 ft + 2 ppm) Tracking ±(10 mm + 2 ppm) (0.032 ft + 2 ppm)
Shortest possible range:
(to prism) 1.5 m (4.9 ft) [not in long range mode](to reflective foil) 2.5 m (8.2 ft)
Measuring time
Prism mode
Standard measurement 2 s Tracking 1.2 s
Direct reflex mode
Standard measurement 3 s up to 30 m +1s/10m Tracking 1.6 s
Range (at standard clear**)
Measurement to prism 1 prism 3000 m (9,840 ft) 1 prism Long Range Mode 1000–5000 m (3,280–16,400 ft) 3 prisms 5000 m (16,400 ft) 3 prisms Long Range Mode 1000–7500 m (3,280–24,600 ft)
Range using Reflex Tape
Reflective foil 20 mm Normal 100 m (328 ft) Reflective foil 20 mm Long Range Mode 200 m (656 ft) Reflective foil 60 mm Normal 250 m (820 ft) Reflective foil 60 mm Long Range Mode 800 m (2,620 ft)
Range Direct Reflex measurement (typically)
Kodak Gray (18% reflective) 70 m (230 ft)Kodak Gray (90% reflective) 100 m (328 ft)
* Internal data memory is not available for 3306.** Standard clear: No haze, overcast or moderate sunlight with very light heat shimmer.
Range and accuracy are dependent on atmospheric conditions and background
radiation.
PERFORMANCE SPECIFICATIONS
Software
Topographic Software Coordinate Geometry Software
Known Station Establishment Free Station Area Calculation Connecting DistancesHeight Transfer
Polar Measurement Stakeout SoftwareEccentric Point StakeoutRemote Object Height Reference LineVertical PlanePoint to Line
Memory capacity options* Recording: internal data memory, storagecapacity – 1900 data lines
Data input/output: External recording and data transfer viaRS-232 C / V24 interfaceData record formats selectable: For M5,
Rec 500, R4 and R5
* Internal data memory is not available for 3306
ORDERING INFORMATION
GENERAL SPECIFICATIONS
Light source Laserdiode 660 nm class 1 to prism;class 2 direct reflex
Beam divergence 0,4 mrad
Atmospheric correction manual setting pressure and temperature
Leveling
Circular level in tribrach circular level/tubular level10'/2mm / 30"/2mm
Clamps and slow motions coaxial
Centering
Centering system Trimble 3-pin or DINOptical plummet Magnification 2xShortest focusing distance 0.5 m (1.6 ft)
Telescope
Magnification 26 x Aperture 40 mm (9.51 inch)Field of view at 100 m 2.9 m (9.5 ft)Shortest focussing distance 1.5 m (4.92 ft)Illuminated crosshair Yes
Display screen automatic contrast adjustment, display illumination 4 lines with 21 characterseach, graphic capabilities (128 x 32 pixels)
Keyboard 7 keys, variable function keys
Operating temperature –20 °C to +50 °C (–5 °F to +122 °F)
Water proofing IP54
Power supply
Internal battery NiMH battery pack, 6 V, 1.3 Ah,rechargeable; charging time with singlecharger approx. 2.5 hrsOperating time: Approx 1000 angle anddistance measurements
Weight
Instrument
incl. battery/case 3.5 kg / 2.5 kg (7.7 lbs / 5.5 lbs)
Dimensions
Instrument 173 × 268 × 193 mm(6.88 × 10.5 × 7.68 inch)
Trunnion axis height,
Trimble 3-pin or DIN 196 mm / 175 mm (7.7 inch / 6.9 inch)
Certified quality in accordance with DIN ISO 9001/EN 29001.
CLASS I and II LASER PRODUCT
Complies with 21 CFR 1040.10
For further information please contact your nearest Trimble Authorized
Distributor or Trimble Office.
You may also visit our website at http://www.trimble.com
YOUR LOCAL TRIMBLE OFFICE OR REPRESENTATIVE
N O R T H A M E R I C A
Trimble Geomatics and
Engineering Division
5475 Kellenburger Road,
Dayton, Ohio 45424-1099,
U.S.A.
800-538-7800 (Toll Free)
+1-937-233-8921 Phone
+1-937-233-9441 Fax
www.trimble.com
E U R O P E
Trimble GmbH
Am Prime Parc 11,
65479 Raunheim,
GERMANY
+49-6142-2100-0 Phone
+49-6142-2100-550 Fax
A S I A - P A C I F I C
Trimble Navigation
Singapore PTE Limited
80 Marine Parade Road
#22-06, Parkway Parade
Singapore 449269
SINGAPORE
+65-6348-2212 Phone
+65-6348-2232 Fax
SOFTWARE AND RECORDING
Specifications and descriptions are subject to change without prior notice.