cb_044

Upload: miguel-rojo-gomez

Post on 02-Jun-2018

218 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/10/2019 cb_044

    1/6

    AIR CONDITIONINGMADE SIMPLE

    A Q U A S N A P L I Q U I D C H I L L E R S

    H E A T P U M P S

    AQUASNAP

    3

    0RA/30RH

    TM

  • 8/10/2019 cb_044

    2/6

    THE IDEAL ALL-IN-ONESOLUTIONWith the Aquasnap everything isincluded to reduce the complexityof the installation. All hydroniccomponents are integrated:circulating pump, expansion tank,filter, safety elements etc. You onlyneed to connect it to your system.Simple!You do not lose time selectingthe hydronic components or dealingwith several suppliers. No time is lostfor installation and commissioningon site everything has been

    mounted and tested in the factory.More peace-of-mind.

    SIMPLE ELECTRICAL CONNECTIONChilds play!

    The Aquasnap can be connected quickly and easily.No more complicated electrical wiring and no timelost on site. A standard main disconnect switch,

    a 24 V control circuit for improved safety,and a single three-phase power supply withoutneutral - the Aquasnap has been designedto save you time.

    BOLT DOWN,

    PLUG IN...READY

  • 8/10/2019 cb_044

    3/6

    PEACE-OF-MIND

    FOR ALL SEASONS

    AN INNOVATIVE AND RELIABLEREFRIGERANT SYSTEMThe refrigerant circuit is entirely welded for perfectand lasting leak-tightness. No capillary tubes.No check valves. Only one expansion device onthe heat pump. Why complicate things, whenthey can be so simple? Everything has beenconceived and designed for maximum reliability.The receiver/heat exchanger in the Aquasnap heatpumps ensures that the units operate with the idealrefrigerant charge, both in heating and in cooling mode.This Carrier-patented device compensates for thedifference in refrigerant quantity between coil andplate heat exchanger. The result?

    No matter what the outside conditions are, the heatexchangers are always used to their maximumcapacity, and the compressors are always protectedagainst liquid refrigerant migration.

    LIQUID

    GAS

    SUPERHEATEDGAS

    SUBCOOLEDLIQUID

    LOW-NOISE COMPRESSORSFewer decibels for increased comfort.The scroll compressors used in the Aquasnap are renownedfor their ultra-quiet and vibration-free operation. They are

    durable and reliable, and their motor is cooled by suctiongas to allow up to 12 start-ups per hour. Plus: they requireno maintenance.

    Assured peace-of-mind.

    CONSTANTLY MONITOREDCOMPRESSORSTo achieve a fast and efficient response and anticipate

    critical situations, the Pro-Dialog control constantly checksand analyses all compressor operating parameters:pressures, temperatures, number of start-ups. The result:the compressor always operates within the idealoperating range.In addition, a Carrier-patented auto-adaptive algorithmintelligently controls compressor start-ups and constantlyadjusts to prevent excessive cycling. As the compressor isalways monitored, the system water volume can besignificantly reduced.

    With unequalled performances and exceptional technicalcharacteristics, hot and cold water production is neverinterrupted. Safe operation for optimum reliability.

  • 8/10/2019 cb_044

    4/6

    A FAN RENOWNEDFOR ITS EXTREMEDISCRETION

    Controlled noise.

    Aquasnap is equipped with the ultra-quiet Flying Bird fan to ensure unrivalledsound quality. The secret?A fan wheel made of a composite material with a rotating shroud thateliminates leakage between the fan blades and shroud for extremely lownoise levels without peaks in the low-frequency range. A tower chassis,

    designed to prevent the transmission of vibrations to the rest of thestructure. A two-speed motor that automatically selects the low fan speed,when outside temperature and heat load are reduced for example duringthe night. Noise has never been so discreet!

    Pro-Dialog is an ingenious control system!

    It manages compressor, fan and water pump operation, optimises electrical energy demands and supervisesall technical parameters. It also offers several remote control facilities: start/stop, dual set point, demand limit,alarm report etc. Pro-Dialog can also control two units operating in parallel. For the Aquasnap heat pump thereis an option to control a supplementary electric heater.

    EASY-TO-USE CONTROL SYSTEMThe Pro-Dialog operator interface is clear and user-friendly: LEDs and numerical displays ensure

    immediate verification of the unit operating parameters. A simple push of a button on the synopticAquasnap diagram gives you immediate display of temperatures, pressures, set point, compressor run

    times and number of start-ups. Moreover, ten access menus, one especially designed to followthe fault history, ensure accurate control and precise fault diagnosis.

    PRO-DIALOG POWERFUL

    CONTROL

  • 8/10/2019 cb_044

    5/6

    YEAR-ROUNDEFFICIENCY

    PROTECTING

    OUR ENVIRONMENT

    From now on you no longer need to choose betweenecology and economy. Refrigerant R-407C has no impacton the ozone layer and complies with current and futureregulations on environmental protection. And becausethe heat exchangers were specifically designed for thethermodynamic characteristics of R407C, the Aquasnapperformances are even superior to those of R-22 -without extra cost.

    Less pollution and more savings everybody wins!

    FROM 10C TO +45C YEAR-ROUNDECONOMICAL

    OPERATIONWhether it snows or the sun shines,Aquasnap can handle all climaticconditions. With its control algorithmthat intelligently regulates fanoperation, it operates reliably andsafely from 10C to +45C, without

    an accessory. For increased savings, Aquasnap automaticallyadjusts the leaving water temperature in both heating andcooling mode. And when the building is unoccupied thechiller or heat pump operates on a second set point.In Aquasnap heat pumps change-over is automatic, basedon the outside air temperature: heating or cooling

    for enhanced comfort in autumn and spring.

    Guaranteed savings!

  • 8/10/2019 cb_044

    6/6A member of the United Technologies Corporation family

    Dix

    it

    JM

    -

    RCS

    Lyon

    B

    353

    000

    870

    -

    Pr

    inte

    d

    in

    Fra

    nce

    TECHNICAL DATA 30RA/RH 040 050 060 070 080 090 100 120 140 160 200 240

    Cooling capacity 30RA* kW 39 49 57 67 79 89 97 115 135 151 198 245

    Heating capacity 30RH** kW 38 45 57 65 78 85 96 116 130 153 194 230

    Cooling capacity 30RH* kW 38 44 54 66 71 83 92 106 132 142 179 210

    Refrigerant R407C

    No. of refrigerant circuits 1 1 1 1 1 2 2 2 2 2 2 2

    Compressor: type/quantity Scroll 1 Scroll 2 Scroll 3 Scroll 4 Scroll 5 Scroll 6

    Water pump: type Centrifugal monocell

    Available pressure, water pump* kPa 141 136 133 121 147 124 114 168 147 116 195 230

    Length mm 2071 2071 2071 2071 2071 2071 2071 2071 2071 2071 3351 3351

    Depth mm 1081 1081 1081 1081 1081 2278 2278 2278 2278 2278 2279 2279

    Height mm 1329 1329 1329 1329 1329 1329 1329 1329 1329 1329 1674 1674

    Operating weight 30RA kg 526 584 597 611 631 1093 1106 1205 1212 1248 2133 2305

    EUROVENTCERTIFIED PERFORMANCE

    * Nominal Eurovent conditions: air 35C, water 12/7C

    ** Nominal Eurovent conditions: air 7C, water 40/45C

    TECHNIC

    ALDATA30

    RA/30RH

    Order No.: 18177-20-11/2005Supersedes order No.: 18177-20-01/2004Manufacturer reserves the right to changeany product specifications without notice.

    OPTIONS AND ACCESSORIES

    Condenser anti-corrosion treatment for marine applications

    Condenser anti-corrosion treatment for industrial applications (30RA)

    Compressor with electronic starter (30RA/RH 040-080)

    Leaving water temperature down to -10C (30RA)

    Hydronic module with dual water pump

    Unit without hydronic module

    Ultra low-noise unit

    Winter operation down to 20C (30RA 040-160)

    Communication gateway with J Bus, LON or BAC net PROTOCOLS

    Supplementary/safety electric resistance heater control module (30RH)

    Carrier actively participates in the Eurovent certification

    programmes. Eurovent is an independent organisation that

    tests products and verifies the conformance between test

    results and data published by the manufacturer.

    Eurovent certification is an important guarantee for consultants

    and installers. They can be sure that a product with Eurovent

    certification will operate in conformance with the specifications

    and satisfy customer requirements.

    The Aquasnap chillers and heat pumps come with Eurovent

    certification.

    30RY/30RYHDUCTABLE COOLING ONLY/HEAT PUMPS17-80 kW

    30RW WATER-COOLED UNITS20-300 kW

    THE ALL-IN-ONE RANGEAQUASNAP

    TM

    30RA/30RH COOLING ONLY/HEAT PUMPS17-250 kW

    Quality Management System Approval Environmental Management System Approval