lyunsailungbuildleg

8/6/2019 lyunsailungbuildleg

http://slidepdf.com/reader/full/lyunsailungbuildleg 1/12

Building LyunsailungPart 1: The Leg

*

**

*

*

*

*

*

*

**

* *

*

* articulation

*

Friday, June 3, 2011



Here is a shot of all the pieces you will require before building. You will need pieces from: 1Barigator, 1 Liger Zero Jager Armor, 1 Bionicle Toa, 1 Shell Karn, 2 Neo Blox Iron Kongs or

Brachioratte, 1 Neo Blox RaptoJaguar, 1 Lord Gale, 1 Buster Eagle, 1 Bear Fighter or Bamburian, 1Ray Saurer, 2 Laser/Scissor Storm, 1 Dark Spiner, 1 Arosaurer, 1Leoblaze, 1 Genosaurer/Breaker, 1

Hammerhead, 1 Ray Kong/Gorillatron, 1 Konig Wolf, 2 Mosasledge, 1Death Stinger, 1 Redler, 1Demonshead, some weights or small but heavy objects

For both legs together,, you will need parts from 1 Lord Gale, 1 Ray Saurer, 2 Neo-Blox Iron Kong/Brachioratte, 1 Leoblaze, 1 Arosaurer, 1 Liger Zero Jager armor, 1 Unenlagia or Buster Eagle, 2

Mosasledge, and 2 Laserstorm or Scissor Storm

All zoids start from the ground up. The legs were by far, the most challenging part to design. I

actually had to go through three-to-four revisions before finally coming up with a design that lookedgood, could support the zoid’s weight, and still be poseable.




• You begin with the standard Arosaurer foot and leg. Plug a piece of sprew used for smaller zoids parts into the adapter used for connectingblox with normal zoids. Then stick both into the forward shin socket.




• On top of the adaptor plug, add the ankle piece from Lord Gale. On theinside part of the leg, insert a blox rubber into the lower opening in theshin, followed by the longer blox connector piece. In the top portion of the back part of the Arosaurer leg, insert another blox-adaptor piece. It

snaps right in!




• On top of the second blox adaptor, place a Neo-blox piece (the one usedfor Neo-blox Iron Kong’s arm using one of the Neo-blox “donuts”. In themiddle hole of the Neo-Blox arm piece, stick a shoulder missile from theBlox Gorillatron/Ray Kong.




• Use an L-shaped leg piece (from Unenlagia, Evoflyer, or Buster Eagle) toconnected the Shoulder Missile with the long blox connector in the

lower part of the front shin*. This completes the digitigrade foot.

• *For the final product, I flipped the vertical orientation of the L-shapedleg piece, but it should not make a difference which way it is oriented,since the two rubber holes are the same distance apart.




• Now, attach the medium Neo-blox found in most Neo-blox kits(specifically, it is the base of the tail of the Neo-blox Gojulas) to the Neo-blox arm piece from earlier. Also, on top of the medium Neo-blox, stick aNeo-blox socket, and into the socket, insert another Neo-blox donuts.This makes the Lyunsailung’s shin shin and knee.




• Into that knee, insert the thigh piece of the Leoblaze through the donut.I think Unenlagia’s thigh will also work, but I haven’t tried it. Into thenon-rubber hole of the Leoblaze thigh, insert another long bloxconnector.




• Take a leg piece from Lord Gale, Flyscissors, or Styru Armor, and attach itto both the long blox connector in the Leoblaze thigh, and the piece of Leoblaze thigh sticking through the Neo-blox donut.




• On the inside of the Lord Gale leg, attach the large-blox socket used forLord Gale or Styru Armor. Attach this piece vertically , in the non-rubber holes.




• Now time for the armor! Take the inside leg armor of Raysaurer andinsert it into the rubber hole at the top of the Lord Gale leg. Attach thehead and belly sections of Laserstorm or Scissorstorm to the Neo-bloxshin. Over the shin armor, now snap the Liger Zero Jager armor intoplace. Attach two blox vertically to the head of the Laserstorm. In theblox that is not covered by the Raysaurer armor, insert a small blox peg.


lyunsailungbuildleg

Documents