mdbt42q & mdbt42q-p - seeed studiostatics3.seeedstudio.com/.../product/mdbt42q-version_b.pdf6...

Version: B

Issued Date: 2016/08/26

Approval Sheet

(產品承認書)

產品名稱 (Product): BT 4.2 Module (nRF52832)

產品型號 (Model No.): MDBT42Q Series

MDBT42Q-P Series

Advantage of MDBT42Q & MDBT42Q-P series:

1. Long working distance:

MDBT42Q: over 80 meters in open space.

MDBT42Q-P: up to 60 meters in open space.

2. Granted main regional certification such as FCC (USA),

IC (Canada), TELEC (Japan), SRRC (China), NCC (Taiwan).

3. RoHS and REACH compliant.

Index

List of Raytac’s BLE Model No. ........................................................................................... 3

1. Overall Introduction ...................................................................................................... 4

1.1. Application ............................................................................................................ 4

1.2. Features ............................................................................................................... 5

1.3. Profile & Service Information ................................................................................ 6

2. Product Dimension ....................................................................................................... 7

2.1. MDBT42Q Series ................................................................................................. 7

2.2. MDBT42Q-P Series ............................................................................................ 12

2.3. RF Layout Suggestion (aka Keep-Out Area) ...................................................... 17

2.4. Pin Assignment ................................................................................................... 18

2.5. GPIO Located Near the Radio ............................................................................ 20

3. Main Chip Solution ...................................................................................................... 20

4. Shipment Packaging Information .............................................................................. 21

4.1. Marking on Metal Shielding ................................................................................ 22

5. Specification ................................................................................................................ 23

5.1. Absolute Maximum Ratings ................................................................................ 23

5.2. Operation Conditions .......................................................................................... 23

5.3. Electrical Specifications ...................................................................................... 24

6. Block Diagram ............................................................................................................. 29

7. Antenna ........................................................................................................................ 30

7.1. MDBT42Q Series ............................................................................................... 30

7.2. MDBT42Q-P Series ............................................................................................ 31

8. Reference Circuit ......................................................................................................... 32

9. Certification ................................................................................................................. 33

9.1. FCC Certificate (USA) ........................................................................................ 33

9.2. TELEC Certificate (Japan) .................................................................................. 34

9.3. NCC Certificate (Taiwan) .................................................................................... 35

9.4. IC Certificate (Canada) ....................................................................................... 37

9.5. SRRC Certificate (China) .................................................................................... 38

9.6. RoHS & REACH Report ..................................................................................... 39

9.7. End-Product Label .............................................................................................. 40

Release Note ....................................................................................................................... 42

3

List of Raytac’s BLE Model No.

MDBT40 & MDBT40-P Series

Series Nordic

Solution Raytac No.

IC Version

Antenna RAM Flash

Memory

MDBT40 nRF51822

MDBT40-128V3

3 Chip

Antenna

16 kb 128 K

MDBT40-256V3 256 K

MDBT40-256RV3 32 kb 256 K

MDBT40-P nRF51822

MDBT40-P128V3

3 PCB

Antenna

16 kb 128 K

MDBT40-P256V3 256 K

MDBT40-P256RV3 32 kb 256 K

MDBT40 - ANT

nRF51422

MDBT40-ANT -256V3

3 Chip

Antenna

16 kb

256 K MDBT40-ANT

-256RV3 32 kb

MDBT40 - ANT-P

nRF51422

MDBT40-ANT -P256V3

3 PCB

Antenna

16 kb

256 K MDBT40-ANT

-P256RV3 32 kb

MDBT40 Nano

nRF51822 MDBT40-n256V3 3 N/A 16 kb 256 K

MDBT40 - ANT-Nano

nRF51422 MDBT40-ANT

-n256V3 3 N/A 16 kb 256 K

MDBT42Q & MDBT42Q-P Series

Series Nordic

Solution Raytac No.

IC Version

Antenna RAM Flash

Memory

MDBT42Q nRF52832 MDBT42Q-512K 1 Chip

Antenna 64 kb 512 K

MDBT42Q-P nRF52832 MDBT42Q-P512K 1 PCB

Antenna 64 kb 512 K

4

1. Overall IntroductionRaytac’s MDBT42Q & MDBT42Q-P is a BT 4.0, BT 4.1 and BT 4.2 stack (Bluetooth low

energy or BLE) module designed based on Nordic nRF52832 SoC solution, which

incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting

peripherals and sensors.

Features of the module:

1. Dual Transmission mode of BLE & 2.4Ghz RF upon customer preference.

2. Compact size with (L) 16 x (W) 10 x (H) 2.2 mm.

3. Low power requirements, ultra-low peak, average and idle mode power consumption.

4. Be compatible with a large installed base of mobile phones, tablets and computers.

5. Fully coverage of BLE software stack. See 1.3 Profile & Service Information.

6. BLE & RF transmission switching helps products fit all operation system and most

hardware.

1.1. Application‧IoT

‧Home automation

‧Sensor networks

‧Building automation

‧Personal Area Networks

‧Health / fitness sensor and monitor device

‧Medical devices

‧Key-fobs and wrist watches

‧Interactive entertainment devices

‧Remote control

‧Gaming controller

‧Beacons

‧A4WP wireless chargers and devices

‧Remote control toys

‧Computer peripherals and I/O devices

‧Mouse

‧Keyboard

‧Multi-touch trackpad

5

1.2. Features‧Multi-protocol 2.4GHz radio

‧32-bit ARM Cortex – M4F processor

‧512KB flash programmed memory and 64KB RAM

‧Software stacks available as downloads

‧Application development independent from protocol stack

‧On-air compatible with nRF51, nRF24AP and nRF24L series

‧Programmable output power from +4dBm to -20dBm

‧RSSI

‧RAM mapped FIFOs using EasyDMA

‧Dynamic on-air payload length up to 256 bytes

‧Flexible and configurable 32 pin GPIO

‧Programmable peripheral interface - PPI

‧Simple ON / OFF global power mode

‧Full set of digital interface all with Easy DMA including:

‧3 x Hardware SPI master ; 3 x Hardware SPI slave

‧2 x two-wire master ; 2 x two-wire slave

‧1 x UART (CTS / RTS)

‧PDM for digital microphone

‧I2S for audio

‧Quadrature demodulator

‧12-bit / 200KSPS ADC

‧128-bit AES ECB / CCM / AAR co-processor

‧Lowe cost external crystal 32MHz ± 40ppm for Bluetooth ; ± 50ppm for ANT Plus

‧Lowe power 32MHz crystal and RC oscillators

‧Wide supply voltage range 1.7V to 3.6V

‧On-chip DC/DC buck converter

‧Individual power management for all peripherals

‧Timer counter

‧5 x 32-bit

‧3 x 24-bit RTC

‧NFC-A tag interface for OOB pairing

6

1.3. Profile & Service InformationProfile & Service are supported by MDBT42Q & MDBT42Q-P as below:

Profile Description Service Description

Alert Notification Profile Alert Notification Service

Blood Pressure Profile

Blood Pressure Service

Device Information Service

Cycling Speed & Cadence Profile

Cycling Speed & Cadence Service


Glucose Profile

Glucose Service


Health Thermometer Profile

Health Thermometer Service


Heart Rate Profile

Heart Rate Service


HID over GATT Profile

HID Service

Battery Service

Proximity Profile

Link Loss Service

Immediate Alert Service

TX Power Service

Running Speed & Cadence Profile

Running Speed & Cadence Service


7

2. Product Dimension

2.1. MDBT42Q Series

‧PCB Dimensions, Pin Indication and Layout Guide

PCB SIZE: (L) 16 x (W) 10 x (H) 2.2 mm

12

2.2. MDBT42Q-P Series

‧PCB Dimensions, Pin Indication and Layout Guide

PCB SIZE: (L) 16 x (W) 10 x (H) 2.2 mm

17

2.3. RF Layout Suggestion (aka Keep-Out Area)Layout is suggested following below instruction to have better wireless performance. When

design is not allowed to leave such space, please make sure to keep the “No-Ground-Pad” as

wider as it can.

18

2.4. Pin AssignmentPin No. Name Pin function Description

(1) GND Ground The pad must be connected to a solid ground plane

(2) P0.25 Digital I/O General-purpose digital I/O




AIN4 Analog input SAADC/COMP/LPCOMP input







(9) DEC4 Power 1V3 regulator supply decoupling. Input from DC/DC converter.

Output from 1V3 LDO .

(10) DCC Power DC/DC converter output pin

(11) VDD Power Power-supply pin



XL1 Analog input Connection to 32.768khz crystal (LFXO)


XL2 Analog input Connection to 32.768khz crystal (LFXO)












19

Pin No. Name Pin function Description


NFC1 NFC input NFC antenna connection


NFC2 NFC input NFC antenna connection






TraceData(3) Trace port output










TraceCLK Trace port clock output


RESET Configurable as system RESET pin

(36) SWDCLK Digital input Serial Wire debug clock input for debug and programming

(37) SWDIO Digital I/O Serial Wire debug I/O for debug and programming





20

2.5. GPIO Located Near the RadioBelow remarks are extracted from Nordic’s nRF52832 Spec. Any updates shall refer to

Nordic’s official release as final reference.

3. Main Chip Solution

RF IC Crystal Frequency

Nordic NRF52832 32MHZ

21

4. Shipment Packaging Information

Antenna Model

Chip/Ceramic

Antenna

MDBT42Q-512K

PCB/Printed

Antenna

MDBT42Q-P512K

- Unit Weight of Module: MDBT42Q-512K: 0.64g/pc ; MDBT42Q-P512K: 0.62g/pc

- Packaging Type: Tray only

- Minimum Package Quantity (MPQ): 88 pcs per Tray

- Carton Contents: 1760 pcs per carton (20 Full Tray + 1 Empty Tray)

- Dimension of Carton: (L) 37 x (W) 21 x (H) 13 cm

- Gross Weight: approx. 2.80 kgs per full carton (contains 1760pcs)

22

4.1. Marking on Metal Shielding

23

5. Specification

5.1. Absolute Maximum Ratings

5.2. Operation Conditions

24

5.3. Electrical Specifications

5.3.1. General Radio Characteristics

5.3.2. Radio Current Consumption (Transmitter)

25

5.3.3. Radio Current Consumption (Receiver)

5.3.4. Transmitter Specification

5.3.5. Receiver Operation

26

5.3.6. RX Selectivity

5.3.7. RX Intermodulation

27

5.3.8. Radio Timing Parameters

5.3.9. RSSI Specifications

28

5.3.10. CPU

5.3.11. Power Management

29

6. Block Diagram

30

7. Antenna

7.1. MDBT42Q Series

31

7.2. MDBT42Q-P Series

32

8. Reference CircuitModule’s default is using internal DC-DC mode.

REMARK:

** When not using DC-DC mode, please remove L2 / L3 / C13. **

** When not using NFC, please remove NFC1 / C19 / C21. **

** When using internal 32.768khz RC oscillator, please remove X2 / C12 / C13. **

33

9. Certification

9.1. FCC Certificate (USA)

34

9.2. TELEC Certificate (Japan)

35

9.3. NCC Certificate (Taiwan)

MDBT42Q Series

36

MDBT42Q-P Series

37

9.4. IC Certificate (Canada)

38

9.5. SRRC Certificate (China)

39

9.6. RoHS & REACH ReportPlease click link below to download full report.

- RoHS Report for MDBT42Q

- RoHS Report for MDBT42Q-P

- REACH Report for MDBT42Q

- REACH Report for MDBT42Q-P

https://mega.nz/#!N45jgATL!WVw8FzMmH0n2BF7aDbvNdBbWc1w2MMhZdUZLa-RgxXE

https://mega.nz/#!xkoTiKwQ!6xhkgu7sHf0IpYSV8UNZYiGLPj8pC5WQvdmwgQBJA5o

https://mega.nz/#!plgUURrK!EfKpRRWlps7chjiZxkElN9WFRCbwHwddcHWcSTihBN0

https://mega.nz/#!p9JACDCB!EyvIhjMgT05u92mTt6XK2olhYmSzZsGs4inMB-Sot80

40

9.7. End-Product LabelIt is suggested using following content adding to package or user manual or label to obey the

regulation. Any rules of end-product label shall refer to each certification for final reference.

9.7.1. FCC (USA)The FCC statement should be included in the user manual when there is no enough space on

label. Otherwise, it should be included on the label.

“This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions. (1) This device may not cause harmful interference. (2) This device must accept

any interference received, including interference that may cause undesired operation.”

The final end product must be labeled in a visible area with the following: “Contain FCC ID:

SH6MDBT42Q”.

9.7.2. TELEC (Japan)When manufacturer is placing the product on the Japanese market, the product must be

affixed with the following Specified Radio Equipment marking:

41

9.7.3. NCC (Taiwan)請依下列標籤式樣自製標籤，標貼或印鑄於器材本體明顯處，始得販賣或公開陳列。

MDBT42Q Series

MDBT42Q-P Series

平台廠商必須於平台上標示字樣「本產品內含射頻模組：ID 編號 CCAM16LP1180T2」或「本

產品內含射頻模組：ID 編號 CCAM16LP1181T1」。

「平台」定義如下：若器材組裝本案模組，消費者仍能正常使用該器材主要功能，該器材得視

為平台。若器材不組裝本案模組，消費者不能正常使用該器材主要功能，該器材不能視為平台。

該類不同廠牌型號器材組裝本案審驗模組後，須分別申請型式認證。

9.7.4. IC (Canada)The IC statement should be included in the user manual when there is no enough space on

label. Otherwise, it should be included on the label.

“This device complies with Industry Canada license-exempt RSS Standard(s). Operation is

subject to the following two conditions. (1) This device may not cause harmful interference. (2)

This device must accept any interference received, including interference that may cause

undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: (1)

l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement.”

The final end product must be labeled in a visible area with the following: “Contain IC ID:

8017A-MDBT42Q”.

42

Release Note 2016/03/24 Version A: 1st release

2016/08/26 Version B:

(1) Updated list of Raytac’s BLE model no..

(2) Added schematic of MDBT42Q-P and RF layout reference in Chapter 2.

(3) Updated packing info in Chapter 4.

(4) Added antenna info in Chapter 7.

(5) Updated info of regional certificates in Chapter 9.

mdbt42q & mdbt42q-p - seeed studiostatics3.seeedstudio.com/.../product/mdbt42q-version_b.pdf6...

Documents