sy77

1
7/28/2019 SY77 http://slidepdf.com/reader/full/sy77 1/1 SY77.DK Help File Loading in the file SY77.DK will setup Band-in-a-Box for the Yamaha SY77 multi-timbral synthesizer. It will setup: 1. Drum #'s for the Yamaha SY77 synthesizer(Drum 1 Preset 2,D15). 2. Patch Map (assigned to factory settings of the SY77's first 64 sounds). 3. Startup Patches and Channels in the Midi Settings Window. The SY/TG series of synths and synth modules are 8 part multi-timbral (8 instruments at once). Note that due to the BANK layout of the SY77, we were only able to select the first 64 patchs(voices) of Bank A for implementation to the General Midi Patch Map in Band-in-a-Box. If you choose not to use this map, you'll have to disable Patch changes under the MIDI pull down menu(Midi Settings). To setup your SY77 do the following: Go to MIDI utility job directory(Jump#806). Select 02:Program Change(Jump #808). Using the (+1 YES) key select NORMAL. This will enable your SY77 to receive Program Changes from Band-in-a-Box. You may now proceed to loading SY77.DK under the MIDI pulldown menu (Load Alternate Drum/Midi Set). Select MULTI mode on your synth so it will receive all 8 of the instruments being sent to it from Band-in-a-Box. Once you've loaded the DK files, you are ready to start having fun with Band-in-a-Box! Have Fun!  

Upload: joshyscribd

Post on 03-Apr-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SY77

7/28/2019 SY77

http://slidepdf.com/reader/full/sy77 1/1

SY77.DK Help File

Loading in the file SY77.DK will setup Band-in-a-Box for the YamahaSY77 multi-timbral synthesizer.

It will setup:1. Drum #'s for the Yamaha SY77 synthesizer(Drum 1 Preset 2,D15).2. Patch Map (assigned to factory settings of the SY77's first 64 sounds).3. Startup Patches and Channels in the Midi Settings Window.

The SY/TG series of synths and synth modules are 8 part multi-timbral(8 instruments at once).

Note that due to the BANK layout of the SY77, we were only able to selectthe first 64 patchs(voices) of Bank A for implementation to the General MidiPatch Map in Band-in-a-Box. If you choose not to use this map, you'll haveto disable Patch changes under the MIDI pull down menu(Midi Settings).

To setup your SY77 do the following:

Go to MIDI utility job directory(Jump#806). Select 02:Program Change(Jump#808). Using the (+1 YES) key select NORMAL. This will enable your SY77 toreceive Program Changes from Band-in-a-Box. You may now proceedto loading SY77.DK under the MIDI pulldown menu (Load Alternate Drum/Midi

Set). Select MULTI mode on your synth so it will receive all 8 of theinstruments being sent to it from Band-in-a-Box.

Once you've loaded the DK files, you are ready to start havingfun with Band-in-a-Box!

Have Fun!