104xx_1pss_a_001_en
TRANSCRIPT
-
7/27/2019 104xx_1PSS_A_001_en
1/22
Buoyancytransmittersto measure liquidlevel, interfaceand density areused foropenor closedvessels or contai-ners.Theycanbemounteddirectlyontopofthevessel,oriftheapplicationrequires,onasidemountedcage.De-pendingon application and vesseldesignvarious installationaccessories and theapplicable displacerhave to beselected.
FEATURES
Universally applicable for all FOXBORO ECKARDTbuoyancy transmitters with displacers
Various connections, dimensions and materials
Displacers are available in standard fabricated
sizes and material Displacers with custom dimensions and material is
available as well
Standards according to DIN and ANSI
Certification according to Pressure EquipmentDirektive PED
Certification for use in Zone 0
Certified as part of an overfill protection accordingto WHG
104 . . Accessories for Buoyancy Transmitter
Product Specifications 05.2005 PSS EML0900A-(en)
-
7/27/2019 104xx_1PSS_A_001_en
2/22
ACCESSORIES
Accessories consisting of:104DE Displacer element page 4104DC Displacer chamber page 6104CF Cover flange kit page 13104FK Flange combination kit page 15
104BF Blanking flange kit page 19
Selection criteriaThe accessories can be used with following types oftransmitters:
Typemax. stat.pressure
Accessories
244LVPPN 40 /
class 300104DE
104DC
-104FK
104BF
144LVDPN 500 /
class 2500104DE
104DC
-104FK
104BF
144LD244LD167LP
PN 250 /
class 1500
104
DE
104
DC
104
CF
104
FK
104
BF
Safety requirementsThe accessories dimensions correspond to the appropriateDIN and ANSI standards.
For the accessories only tough materials are usedaccording to the AD instruction sheet series W or thematerial selection sheets VdTV
Application in Zone 0 / as part of an overfill protection(WHG)
If the transmitter and the displacer 104DE are permitted foruse in Zone 0, the remaining accessories can be used
without any restriction.Carbon Steel (1.0460): min. thickness of material to be 3mm (1.12 inch).
Displacer chambersCalculation, manufactoring and testing corresponding torequirements of AD instruction sheets series B and HP.
Displacer sizing is according to the Pressure VesselRegulation.
Non standard displacers can be certified by TV.
2 104.. PSS EML0900A-(en)
104FK
104BF
104CF
1 44LVD
244LVP
104FK1 44LD
244LD
167LP
104BF
104DE
104DC
-
7/27/2019 104xx_1PSS_A_001_en
3/22
Application considerations
For all accessories exposed to the process, the followingpressure / temperature ranges with references to theselected material are applicable:
Material: C 22.8Nom.press.PN
Max. permissible operating pressure in barfor temperatures in C
DIN ANSIClass
-60 -10 ...+120
+200 +250 +300 +350 +400
16 12 16 13 11 9 8 -40 30 40 35 32 27 21 -63 48 64 50 45 39 30 -
100 73 98 80 70 60 48 -160 120 160 130 112 96 90 76250 187 250 200 175 150 140 119
400 270 360 320 280 240 200 -500 300 400 400 375 312 250 -
150 14 16 14 12 10 8 -300 38 46 43 41 38 37 -600 76 92 87 83 77 73 -900 114 139 131 123 116 110 90
1500 191 231 219 206 180 145 1202500 300 360 320 280 240 200 -
Comparison of material
Detailed specifications for the materials with respect tochemical composition, temperature, limits of application andkind of certification according to EN 10 204, AD 2000 andEN 13 445.
Material: 1.4571 / 1.4404Nom. press. PN Max. permissible operating pressure in bar
for temperatures in C
DIN ANSIClass
-196 -10 ...+50
+100 +200 +300 +400
16 16 16 16 12 9 740 40 40 35 32 28 2563 64 64 57 51 45 33
100 100 100 95 80 70 64160 160 160 142 128 113 97250 250 250 230 200 177 162
400 400 400 368 320 280 260500 500 500 460 380 320 300
150 19 18 16 13 10 6300 49 49 42 35 31 27600 99 99 84 71 63 58900 148 148 126 107 94 87
1500 248 248 211 178 158 1452500 400 400 350 296 262 241
Material: NiMo 16 CrNom. press. PN Max. permissible operating pressure in bar
for temperatures in C
DIN ANSIClass -10 ...+50 +100 +200 +300 +400
16 16 16 12 9 740 40 35 32 28 2563 64 57 51 45 33
100 100 95 80 70 64150 18 16 13 10 6300 49 41 34 30 28600 99 83 68 61 57
104.. 3PSS EML0900A-(en)
Designation WNr DIN Remarks Conform with
St 35.8 III 1.0305 17 175 ASTM A 519 - 1020C 21 1.0432 VdTV - Wbl. 399 ( ANSI Flanges only) ASTM A 105C 22.8 1.0460 17 243 VdTV - Wbl. 350/3 ASTM A 576 - 1020HI 1.0345 17 155 ASTM A - 201 - AA2 1.4541 267 part 13 Nuts and bolts -50 to +120C ASTM A 193 B 8 M
ASTM A 194 B 8 M21 CrMo V 57 1.7709 17 240 Bolts -10 to +400C ASTM A 193 B 7 M24 CrMo 5 1.7258 17 240 Nuts -10 to +400C ASTM A 194 Gr 7X6 CrNiMoTi 17 12 2 1.4571 17 440 ASTM A ~ Typ 316 TiX2 CrNiMo 17 13 2 1.4404 17 440 ASTM A ~ Typ 316 LNiMo 16 Cr 15 W 2.4819 17 744 Conform to Hastelloy C-276 VdTV - Wbl. 400 UNS N 12 276
-
7/27/2019 104xx_1PSS_A_001_en
4/22
Displacer 104DE
Displacer
Transmitter 104DE-SD 104DE-ID
Density range [kg/m3]
144LD, 244LD,244LVP
100 ... 1500 50 ... 600
144LVD 550 ... 1500 250 ... 1000
167LP 550 ... 1500 125 ... 500
Static pressure rating . . . . . . PN 100 / Class 600PN 250 / Class 1500PN 500 / Class 25001)
Materials . . . . . . . . . . . . . . . 1.4404 (316L)Hastelloy CPTFE,PTFE + 25% carbon
Suspension 2) . . . . . . . . . . . 1.4571
Hastelloy C
1) With material PTFE only2) 1.4571 as chain, length of link 15 mm; all others materials as solid wire3) Also valid for permission as part of an overfill protection acc. to WHG
Divided displacers (on request)Displacers with a length of more than 3 m (~9 feet) aredivided. The parts are screwed together and secured (fordiameters >13 mm); for diameters 3000 mm, and density ranges2000 kg/m on request.
Use in Zone 0For use in Zone 0, the displacer suspension needs aseperate grounding wire if there are more than 6 connectionpoints, or the resistance between displacer downside andtop end of suspension is more than 106 , or the weightforce at totally floated displacer is less than 10 N.Displacers longer than 3 m (~9 feet) have to be securedagainst oszillation at least every 3 m distance. 3)
Mechanical vibrationsIf the transmitter is exposed to external vibrations by means
of the installation, it is recommended to order the displacerwith a damping spring (Model Code Option -D) which isattached to the suspension chain. Note: Do not use thedamping spring in process temperatures exceeding 250 C.When using a displacer chamber the gap between dis-placer and cage should not be less than 10 mm (~ inch).
1) = 1 - 2 with 1 = density of lower medium,2 = density of upper medium
2) Displacers made of metal can cause small deviations in diameter,volume and weight
3) For measurement of interface or density, the max. density of the lowermedium is 1350 kg/m
4 104.. PSS EML0900A-(en)
Standard Dimensions and Weights for Density Ranges 4)
Material 1.4404 / 1.4435 (316L) 5)PTFE /
PTFE with 25 % CHastelloy C 5)
-SD (PN 100) -ID 6) (PN 40 / 63) -SD (PN 250) -SD (PN 500) -SD (PN 100 / 160)
Density Range
250 ... 1500 kg/m 100 ... 600 kg/m 400 ... 2000 kg/m 200 ... 1500 kg/m 300 ... 1500 kg/m
Model
Code
Len.
L
mm
Vol.
cm
Wei.
N
PN
bar
mm
Vol.
cm
Wei.
N
PN
bar
min
kg/m
mm
Vol.
cm
Wei.
N
PN
bar
mm
Vol.
cm
Wei.
N
PN
bar
mm
Vol.
cm
Wei.
N
PN
bar
mm
10 350 60.3 1000 19 100 101.6 2840 38 40 460 42.4 500 18 250 62 1056 23 500 60.3 1000 18 100
11 500 48.3 920 17 100 88.9 3100 43 63 580 42.4 710 24 250 51 1021 23 500 48.3 920 19 100
12 750 42.4 1060 21 100 76.1 3410 44 63 545 33.7 670 21 250 42 1039 24 500 48.3 1370 27 100
13 1000 33.7 890 17 100 60.3 2855 41 63 545 26.9 570 18 250 35 961 21 500 33.7 890 19 100
14 1200 33.7 1070 20 100 60.3 3425 48 63 675 26.9 680 22 250 35 1153 25 500 33.7 1070 22 100
15 1500 26.9 850 16 100 51 3065 39 63 460 21.3 540 17 250 30 1060 2 4 5 00 26.9 850 18 160
16 1800 26.9 1020 19 100 42.4 2540 38 63 495 21.3 640 20 250 28 1107 25 500 26.9 1020 21 160
17 2000 26.9 1140 21 100 42.4 2825 41 63 565 21.3 710 22 250 25 981 22 500 26.9 1140 23 160
18 2500 21.3 890 20 100 38 2840 37 63 425 17.2 580 16 250 22.5 993 23 500 21.3 890 23 16019 3000 21.3 1070 24 100 38 3400 45 63 575 17.2 700 23 250 20 942 22 500 21.3 1070 27 160
inch
20 14 60.3 1020 20 100 101.6 2885 38 40 455 42.4 510 18 250 62 1074 23 500 60.3 1020 18 100
22 32 42.4 1150 23 100 76.1 3700 47 63 595 33.7 730 23 250 42 1126 26 500 33.7 720 16 100
24 48 33.7 1090 20 100 60.3 3480 49 63 680 26.9 690 22 250 35 1171 26 500 33.7 1090 23 100
25 60 26.9 870 16 100 51 3115 40 63 465 21.3 540 18 250 30 1076 24 500 26.9 870 18 100
26 72 26.9 1040 19 100 42.4 2580 38 63 505 21.3 650 21 250 28 1124 26 500 26.9 1040 21 160
27 84 26.9 1210 22 100 42.4 3000 44 63 635 21.3 760 23 250 25 1046 24 500 26.9 1210 25 160
28 96 21.3 870 20 100 38 2765 37 63 420 17.2 5 70 16 250 22.5 9 68 22 500 21.3 8 70 23 160
29 120 21.3 1090 25 100 38 3455 46 63 595 17.2 710 24 250 20 957 22 500 21.3 1090 2 5 1 60
-
7/27/2019 104xx_1PSS_A_001_en
5/22
MODEL CODES
104.. 5PSS EML0900A-(en)
Displacer Element 104DE 250405
Density Range for 144LD, 244LD, 144LVD, 244LVP and 167LPStandard (Density Ranges see PSS) . . . . . (b) . . . . . . . . . . . . -SDInterface (Density Ranges see PSS) . . . . . (c) . . . . . . . . . . . . -ID
Displacer Material1.4404 / 1.4435 / 1.4571 (316L) (not available with Pressure Rating Code C)(a) . Sptfe (for -SD only) (not for application in Zone 0) . . . . . . . . . . . . . . . . . Pptfe with 25% Carbon (for -SD only) . . . . . . . . . . . . . . . . . . . . . . . OHastelloy C (for -SD only) (not available with Pressure Rating Code C). . (a) . . C
Displacer Length "L"Standard for DIN Max Range
350 mm . . . . . . . . . . . . . . . . . . . . . 0 - 350 mm . . . . . . . . . . . . . . 10500 mm . . . . . . . . . . . . . . . . . . . . . 0 - 500 mm . . . . . . . . . . . . . . 11750 mm . . . . . . . . . . . . . . . . . . . . . 0 - 750 mm . . . . . . . . . . . . . . 121000 mm . . . . . . . . . . . . . . . . . . . . . 0 - 1000 mm . . . . . . . . . . . . . 1 31200 mm . . . . . . . . . . . . . . . . . . . . . 0 - 1200 mm . . . . . . . . . . . . . 1 41500 mm . . . . . . . . . . . . . . . . . . . . . 0 - 1500 mm . . . . . . . . . . . . . 1 5
1800 mm . . . . . . . . . . . . . . . . . . . . . 0 - 1800 mm . . . . . . . . . . . . . 1 62000 mm . . . . . . . . . . . . . . . . . . . . . 0 - 2000 mm . . . . . . . . . . . . . 1 72500 mm . . . . . . . . . . . . . . . . . . . . . 0 - 2500 mm . . . . . . . . . . . . . 1 83000 mm . . . . . . . . . . . . . . . . . . . . . 0 - 3000 mm . . . . . . . . . . . . . 1 9
Standard for ANSI Max Range14-Inch . . . . . . . . . . . . . . . . . . . . . . 0 - 14 inch . . . . . . . . . . . . . . 2 032-Inch . . . . . . . . . . . . . . . . . . . . . . 0 - 32 inch . . . . . . . . . . . . . . 2 248-Inch . . . . . . . . . . . . . . . . . . . . . . 0 - 48 inch . . . . . . . . . . . . . . 2 460-Inch . . . . . . . . . . . . . . . . . . . . . . 0 - 60 inch . . . . . . . . . . . . . . 2 572-Inch . . . . . . . . . . . . . . . . . . . . . . 0 - 72 inch . . . . . . . . . . . . . . 2 684-Inch . . . . . . . . . . . . . . . . . . . . . . 0 - 84 inch . . . . . . . . . . . . . . 2 796-Inch . . . . . . . . . . . . . . . . . . . . . . 0 - 96 inch . . . . . . . . . . . . . . 2 8120-Inch . . . . . . . . . . . . . . . . . . . . . 0 - 120 inch . . . . . . . . . . . . . 2 9Intermediate Lengths . . . . . . . . . . . . . . .0 - 3000 mm/0-120 inch (d) . . . . . 30
Suspension Length: (Dimension "b") (Specify exact length)Up To 0.99 m/39 Inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0001 m/39.4 Inches To 3 m/118.1 Inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0033 m / 118.1 Inches To 5 m / 196.8 Inches . . . . . . . . . . . . . . . . . . . . . . . . . . . 0055 m / 196.8 Inches To 10 m / 394 Inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 010
Suspension Material1.4404 / 1.4435 / 1.4436 (316L) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SHastelloy C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C
Pressure RatingUp to PN 100/Class 600 (for interface Max PN 40/63) (Density ranges see PSS). . . . . . . . . . . . . . . AUp to PN 250/Class 1500 use only with devices 144LD, 244LD, 144LVD and 167LP. . . . . . . . . . . . . BPN 500/Class 2500 use only with devices 144LVD and 167LP in Version -51 and -52 . . . . . . . . . . . . C
OptionsDamping Spring (Mat. 1.4301, Max. 250 C). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -DOxygen Service Cleaned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -OAdditional Partition Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - X
Tag No. Labeling
Stamped With Weather Resistant Color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -SStainless Steel Label Fixed With Wire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -L
Certificates
EN 10204-2.1 Certificate Of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1EN 10204-3.1 Inspection Certificate Of Process Wetted Material . (e) . . . . . . . . . . . . . . . . . . . . . . . -3
(a) For application in Zone 0(b) Fluid Density, Pressure & Temp. required for calibration(c) Upper and Lower Fluid Density required for calibration(d) Length of Displacer in mm or inches required for manufacturing(e) Not with Displacer Material P or O
-
7/27/2019 104xx_1PSS_A_001_en
6/22
DISPLACER CHAMBER 104DC
Displacer chambers are offered in four vessel mountingarrangements. The length L between the connection flan-ges corresponds to the displacer length (page 4).For use as a part of an overfill protection the same length of
displacer and chamber is required.
Connection144LVD244LVP
144LD244LD167LP
Side-Side yes yesSide-Bottom yes yes
Side-Top no yesTop-Bottom no yes
with heating jacket yes yes
Materials
pipes 1.0305 (A519-1020)1.4571 (316Ti)
flanges 1.0460 (A105)1.4571 (316Ti)
heating jacket 1.0305 (A519-1020) for pipes1.0460 (A105) for flanges1.0345 (A-201-A) tins
Displacer chamber
MountingVessel connection flanges #2 DN 50 / 2 inch1)
Transmitter/chamber tube #1 DN 80 / 3 inchDN 100 / 4 inch
Static pressure rating2) . . . . . PN 16/ 40/ 63/100/160/250Class150/300/600/900/1500
Flange faceacc. to DIN 2526. . . . . . . Type C, smooth Rz=40-160
m (up to PN 40)Type E, smoothRz 16 m (> PN 40)
DIN 2521 . . . . . . . . . . . . Type N, grooveDIN 2696 . . . . . . . . . . . . Type L, lens3)
acc. to ANSI B16.5 . . . . . Type RF, raised faceType RJF, Ring Joint FaceAARH, smooth finish(Ra=125 inch)
Drain connection
For versions 104DC-SS and -ST onlyDrain plug #4 . . . . . . . . . . . . G A (DIN) - 14 NPT
orDrain flange #3. . . . . . . . . . . DN 15 / 20 / 25 / 50
/ / 1 / 2 inch
The additional required blanking flange 104BF has to beordered separately (see page 21).
1) other connection flanges on request2) diameter DN 100 / 4 inch for nominal pressure
up to PN 40 / Class 300 only3) for nominal pressure PN 160 and 250 only
Example: Displacer chamber Connection Side-Side
#1 Connection flange (to transmitter)#2 Chamber connection flange#3 Drain flange#4 Drain plugs
Type label
6 104.. PSS EML0900A-(en)
L
#1#2
#2
#4
#3
G E H A E U S E V O N A R M A T U R E N
B O D Y O F T R A N S M I T T E R
Z UL. UEBER D R UECKE I N A BHA ENG I G KEI T D . T EM PER A T UR
P E R M I S S I B L E P R E S S U R E - T E M P E R A T U R E R A T I N G S
S U R P R E S S I O N A D M I S S I B L E
W E R K S T O F F / M A T E R I A L
PN
S E R : N r .
LtI N H A L T / V O L U M E
B AU J AH R / YE AR
-10 C B E T R . T E M P . S C H R A U B E N A U S A 2 ( A 4 ) V E R W E N D E NU S E S C R E W S M A D E F R O M A 2 ( A 4 ) W H E N O P E R A T I N GT E M P E R A TU R E I S - 1 0 C
P R F D R U C K / T E S T P R E S S U R E b a r
bar
C
(3)
0036
M a d e i n G e r m a n y b y F O X B O R O - E C K A R D T G m b HD - 7 0 3 7 6 S T U T T G A R T
-
7/27/2019 104xx_1PSS_A_001_en
7/22
DIMENSIONS
Displacer chamber 104 DC: Connections
1 Connecting flange #1 to transmitter (See model code: Flange size & pressure rating2 Process connection flange #2 (See model code: Flanges to vessel)3 Drain flange #34 Drain plug #45 Flange combination 104 FK7 Connection flange for heating jacket DN 15, PN 40, DIN 2135, max. working pressure 25 bar / 362 psi
L = Length of displacer = max. span.
104.. 7PSS EML0900A-(en)
without heating jacket with heating jacketSide - Side Side - Bottom Side - Top Top - Bottom Side - Side
f
!
b
L
e
g
"
b
h1
L
f
#
!
"
b
L
h2
e
g
b
Lh3
#
f
b
L
e
"
17
0.
67
!
%
40
1.
57
1 48
5.83
+2
+0.08
40
1.
57
g
-
7/27/2019 104xx_1PSS_A_001_en
8/22
8 104.. PSS EML0900A-(en)
Staticpressure
rating
FlangesizeDN
Dimensions [mm]
b
1)
f
1)
h2
1) 2)
e g h1 1) 2) h3 1) 2)
Material
DINPN
ANSIClas
s#1, #2 #3 St 35.8 1.4571
1.4541St 35.8 1.4571
1.4541St 35.8 1.4571
1.4541St 35.8 1.4571
1.4541
16 3)
DN100/50
15127 127
208 208218+L 213+L 545+L 545+L 122 167 327+L
20/25 210 210
DN150/50
15127 127
208 208218+L 213+L 805+L 805+L 125 167 587+L
20/25 210 210
40
DN80/50
15167 147
196 176196+L 176+L 529+L 509+L 128 153 333+L
20/25 198 178
DN100/50
15127 127
208 208218+L 218+L 558+L 558+L 135 167 340+L
20/25 210 210
DN150/50
15127 -
208 -218+L - 345+L - 145 192 627+L
20/25 210 -
63
DN80/50
15167 147
203 183210+L 190+L 575+L 555+L 142 167 365+L
25 216 196
10015
167 147203 183
216+L 196+L 597+L 577+L 148 173 381+L25 216 196
15015
167 147203 203
233+L 233+L 643+L 643+L 176 175 420+L25 216 216
25015
177 147240 240
248+L 248+L 714+L 714+L 202 187 466+L25 245 245
150
3 in*/ 2in
in *167 147
205 185212+L
(218+L)192+L
(198+L)572+L
(597+L)552+L
(557+L)140
(146)169
(175)360+L
(379+L) in 210 1901 in 214 194
4 in /2 in
in127 127
218 218233+L
(239+L)233+L
(239+L)599+L
(618+L)599+L
(618+L)146
(152)180
(186)366+L
(379+L) in 222 2221 in 226 226
6 in /2 in
in127 -
218 -233+L
(239+L)--
915+L(951+L)
--
159(165)
212(165)
682+L(712+L)
in 222 -1 in 226 -
300
3 in /2 in
in167 147
211 191218+L
(226+L)198+L
(226+L)600+L
(635+L)580+L
(615+L)150
(158)175
(183)382+L
(409+L) in 216 1961 in 220 200
4 in /2 in
in127 127
222 222240+L
(248+L)240+L
(248+L)631+L
(667+L)631+L
(667+L)156
(164)186
(194)391+L
(419+L) in 227 2271 in 232 232
6 in /2 in
in127 -
222 -240+L
(248+L)--
963+L(1021+L
)--
169(177)
218(226)
723+L(773+L)
in 227 -1 in 232 -
6003 in /2 in
in167 147
217 197228+L
(229+L)208+L
(209+L)638+L
(644+L)618+L
(624+L)159
(161)185
(187)410+L
(415+L) in 222 2021 in 227 207
9003 in /2 in
in167 147
225 225256+L
(258+L)256+L
(258+L)749+L
(757+L)749+L
(757+L)198
(200)208
(210)493+L
(499+L) in 235 2351 in 238 238
15003 in /2 in
in177 177
247 247271+L
(273+L)271+L
(273+L)799+L
(807+L)799+L
(807+L)224
(226)210
(212)528+L
(534+L) in 257 2571 in 260 260
* in = inches1) Numbers in brackets = Version contact face RJF2) Size tolerance of displacer chamber according to DIN 28005 resp. Eckardt factory standard N/GP 163) DN 80 flange according to DIN 2635
-
7/27/2019 104xx_1PSS_A_001_en
9/22
Table of weights
104.. 9PSS EML0900A-(en)
Displacer chamber 104DC Weight [kg]Length L Flange size DIN PN ANSI Class
mm inch DN 16 40* 63 100 160 250 150* 300* 600 900 1500350 14 80
100150
/ 3 inch/ 4 inch/ 6 inch
-2430
222634
(33) 27--
30--
35--
48--
222633
(33) 223141
(33) 30--
49--
61--
500 - 80100150
/ 3 inch/ 4 inch/ 6 inch
-2735
242939
(36) 29--
32--
38--
52--
242938
(36) 293446
(41) 32--
52--
65--
750 32 80100150
/ 3 inch/ 4 inch/ 6 inch
-3041
263245
(40) 31--
35--
41--
56--
263244
(40) 313752
(45) 35--
55--
69--
1000 - 80100150
/ 3 inch/ 4 inch/ 6 inch
-3346
355030 (48)
33-44
38--
46--
62--
283549
(44) 334057
(49) 38--
60--
75--
1200 48 80
100150
/ 3 inch
/ 4 inch/ 6 inch
-
3651
30
3855
(48) 36
--
40
--
49
--
67
--
30
3854
(48) 36
4362
(54) 40
--
63
--
80
--1500 60 80
100150
/ 3 inch/ 4 inch/ 6 inch
-4158
334362
(54) 39--
44--
54--
74--
334361
(54) 394869
(60) 44--
68--
87--
1800 72 80100150
/ 3 inch/ 4 inch/ 6 inch
-4566
364770
(60) 42--
48--
59--
80--
364769
(60) 425277
(66) 48--
73--
93--
2000 84 80100150
/ 3 inch/ 4 inch/ 6 inch
-4871
385075
(63) 44--
51--
62--
85--
385074
(63) 445582
(69) 51--
76--
98--
2500 96 80100
150
/ 3 inch/ 4 inch
/ 6 inch
-54
82
4156
86
(71) 47-
-
57-
-
70-
-
97-
-
4156
85
(71) 4767
93
(77) 57-
-
84-
-
110-
-3000 120 80
100150
/ 3 inch/ 4 inch/ 6 inch
-6194
466398
(80) 52--
63--
78--
105--
466397
(80) 5268
105
(86) 63--
92--
118--
* Numbers in brackets = Version contact face RJF
-
7/27/2019 104xx_1PSS_A_001_en
10/22
Displacer Chamber 104DC .......
Mounting Type (Flanges to Vessel)Side - Side . . . . . . . . . . . . . . . . . . . . . . . . . - SSSide - Bottom . . . . . . . . . . . . . . . . . . . . . . . . -SB
Side - Top . . . . . . . . . . . . . . . . . . . . . . . . . . -STTop - Bottom . . . . . . . . . . . . . . . . . . . . . . . . -TB
Flange Size (to Transmitter) & Pressure RatingDN80, PN 16/40 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11DN80, PN 63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12DN80, PN 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3DN80, PN 160 (for -SS only) . . . . . . . . . . . . . . . . . . . 14DN80, PN 250 (for -SS only) . . . . . . . . . . . . . . . . . . . 15DN100, PN 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1DN100, PN 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2DN150, PN 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3DN150, PN 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 43 inch, Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3 inch, Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . 323 inch, Class 600 . . . . . . . . . . . . . . . . . . . . . . . . . . 333 inch, Class 900 (for -SS only). . . . . . . . . . . . . . . . . . 343 inch, Class 1500 (for -SS only). . . . . . . . . . . . . . . . . . 354 inch, Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . 414 inch, Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . 426 inch, Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . 436 inch, Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Contact Face: (Transmitter Mounting Flange) (e)Type C (available with flange size 11, 21 to 24) . . . . . . . . . . . . . . CType E (available with flange size 12, 13) . . . . . . . . . . . . . . . . . EType F . . . . . . . . . . . . . . . . . . . . . (a) . . . . . . . . . . . . . FType L (available with flange size 14, 15) . . . . . . . . . . . . . . . . . LType RF . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . RType RJF (available withFlange Size 31 to 44) . . . . . . . . . . . . . . JSmooth Finish (RA = 125 m) (available up to Class 600) . . . . . . . . S
Dimension:Standard ("L" = 10 to 29). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SIntermediate Lengths ("L" = 33 to 49) . . . . . . . . . . . . . . . . . . . . . . . Z
Length "L" (Displacer): L = displacer length - see EML0911Standard for DIN
350 mm . . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 10500 mm . . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 11750 mm . . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 121000 mm . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 131200 mm . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 141500 mm . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 151800 mm . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 162000 mm . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 172500 mm . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 183000 mm . . . . . . . . . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 19
Standard for ANSI14 inch . . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 2032 inch . . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 2248 inch . . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 2460 inch . . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 2572 inch . . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 2684 inch . . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 2796 inch . . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 28120 inch . . . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 29
(continued on next page)
MODEL CODES 104DC
10 104.. PSS EML0900A-(en)
-
7/27/2019 104xx_1PSS_A_001_en
11/22
MODEL CODES 104DC (continued)
104.. 11PSS EML0900A-(en)
Intermediate Lengths (specify exact lengths)L < 1000 mm . . . . . . . . . . . . . . . . . ( c) . . . . . . . . . . . . . . . . . . . . 331000 mm < L < 2000 mm . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 37
2000 mm < L < 3000 mm . . . . . . . . . . . (c) . . . . . . . . . . . . . . . . . . . . 39L < 48 inch. . . . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 4448 inch < L < 84 inch . . . . . . . . . . . . . ( b) . . . . . . . . . . . . . . . . . . . . 4784 inch < L < 120 inch. . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . 49
Material:Carbon Steel 1.0460 (A-105). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K1.4571 (316 Ti) (Avail with Flange Size & Pressure Rating 11 to 13, 21, 22, 31 to 33, 41, 42) . S
Flanges to Vessel (e)DN 50 Type C (available with flange size 11, 21 to 24) . . . . . . . . . . . . . . . . . . . . . . . . . CDN 50 Type E (available with flange size 12, 13) . . . . . . . . . . . . . . . . . . . . . . . . . . . . EDN 50 Type N . . . . . . . . . . . . . . . . . (a) . . . . . . . . . . . . . . . . . . . . . . . . . . . NDN 50 Type F . . . . . . . . . . . . . . . . . ( a) . . . . . . . . . . . . . . . . . . . . . . . . . . . FDN 50 Type L (available with flange size 14, 15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . L
2 inch Type RF . . . . . . . . . . . . . . . . (b) . . . . . . . . . . . . . . . . . . . . . . . . . . . R2 inch Type RJF (avail. with flange size 32-35, 42 & 44 and mounting type -SS . . . . . . . . . . . . J2 inch Type SF Smooth finish; (RA 125 m) up to Class 600. . . . . . . . . . . . . . . . . . . . . . S
Drain FlangeWithout (only available with mounting type -SB, -TB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDrain Plug G 3/4 A(DIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GDrain Plug 3 /4 - 14 NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NDN15; Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KDN15; Type E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ADN15; Type N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BDN15; Type F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CDN15; Type L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DDN20; Type C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L
DN20; Type N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FDN20; Type F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JDN25; Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SDN25; Type E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MDN25; Type N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PDN25; Type F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QDN25; Type L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RDN50; Type C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZDN50; Type E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TDN50; Type N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UDN50; Type F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDN50; Type L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X1/2 inch; Type RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11/2 inch; Type RJF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3/4 inch; Type RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33/4 inch; Type RJF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 inch; Type RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 inch; Type RJF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 inch; Type RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 inch; Type RJF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
(continued on next page)
-
7/27/2019 104xx_1PSS_A_001_en
12/22
MODEL CODES 104DC (continued)
12 104.. PSS EML0900A-(en)
OptionsOxygen Service Cleaned (PN 25) (avail. with mounting -SS and flange size 11-13 & 31-33 and contact face E, R). -O
Tag No. Labeling
Stamped with weather resistant color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -SStainless Steel Label fixed with wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -L
Certificates
EN 10204-2.1 Certificate of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1EN 10204-3.1 Inspection Certificate of process wetted material . . . . . . . . . . . . . . . . . . . . . . . . . . . -3PED 97/23/EC additional unit verification, according to Module F/G . . . . . . . . . . . . . . . . . . . . . . . . . -4Comply with NACE Standard MR-01-75 . . . (d) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -6Wasserstand 100 (only with drain flange DN20, DN25, 3/4 inch or 1 inch available.
Cost for certificate is included in the transmitter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -9Material Tests
X-Ray & Isotope test for weldings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -7Dye penetrate test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -8
(a) Only available with flange size & pressure rating 11 to 13 and 21 to 24(b) Only available with flange size & pressure rating 31 to 44(c) Only available with flange size & pressure rating 11 to 24(d) On request(e) Type C raised face (Rz 40-160) per DIN 2526
Type E raised face (Rz 16) per DIN 2526Type N groove per DIN 2512Type F Tongue per DIN 2512Type RF raised face per ANSI B 16.5Type RJF ring joint face per ANSI B 16.5Type L lens per DIN 2696
-
7/27/2019 104xx_1PSS_A_001_en
13/22
COVER FLANGE KIT 104CF
The cover flange kit is necessary for the sandwich typetorque tube transmitters 144LD, 244LD and 167LP.
Seals, stuts and nuts are included. Vent plug is optionally.
MaterialsFlange . . . . . . . . . . . . . . . . . WNr. 1.0460 (A-105)
WNr. 1.4571 (316Ti)Hastelloy C 1)
Gaskets,spiral sealings 2). . . . . . . . . . Steel / Graphite
WNr. 1.4404 / Graphite 3)
Graphite: for tongue or grooveLens: steel or 1.4404Sealings RJF: steel or 1.4404
Bolts . . . . . . . . . . . . . . . . . . 21CrMo V 57 or A2 4)
Nuts. . . . . . . . . . . . . . . . . . . 24CrMo 5 or A2 4)
Dimensions and weightssee tables page 20
Cover flange kit104CF
DN 80 / 3 inch
DN 100 / 4 inch
with vent plug G A (DIN ISO 228) / NPT
1) Basic materials 1.4404 or 1.4571, with covering of special material2) Depending on basic material3) For all materials except 1.04604) A2 for temperatures below -10C5) For nominal pressure PN 160 and 250 only
MountingDiameter . . . . . . . . . . . . . . . DN 80 / DN100
3 inch / 4 inch
Static pressure rating . . . . . . PN 16/ 40/ 63/100/160/250Class150/300/600/900/1500
Flange faceacc. to DIN 2526. . . . . . . Type C, smooth
(Rz= 40-160 m)Type E, smooth Rz=16 m
DIN 2521 . . . . . . . . . . . . Type N, grooveType F, tongue
DIN 2696 . . . . . . . . . . . . Type L, lens 5)
acc. to ANSI B16.5. . . . . Type RF, smoothType RJF, ring joint faceAARH, smooth finish(Ra= 125 25 inch)
1 Cover flange (Code 11 to 45 / E to J)2 Gaskets3 Bolts and nuts4 Vent plug
104.. 13PSS EML0900A-(en)
!
"
-
7/27/2019 104xx_1PSS_A_001_en
14/22
MODEL CODES 104CF
14 104.. PSS EML0900A-(en)
Cover Flange Kit (Flange, Gaskets, Bolts & Nuts) 104CF .......
Flange Size & Pressure RatingDN80 PN16/40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -11DN80 PN63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -12
DN80 PN100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -13DN80 PN160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -14DN80 PN250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15DN80 PN400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -16DN70 PN500 (c) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -17DN100 PN16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -21DN100 PN40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -22DN100 PN63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -23DN100 PN100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -24DN100 PN160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25DN100 PN250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -263-Inch ANSI Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 313-Inch ANSI Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 32
3-Inch ANSI Class 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 333-Inch ANSI Class 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 343-Inch ANSI Class 1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -354-Inch ANSI Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 414-Inch ANSI Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 424-Inch ANSI Class 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 434-Inch ANSI Class 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 444-Inch ANSI Class 1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -45
Contact Face (a)Type C (available with -11, 21, -22) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CType E (available with -12, -13, -23, -24). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EType F (available with -11, to -13 & -21 to -24). . . . . . . . . . . . . . . . . . . . . . . . . . . . . FType N (available with -11, to -13 & -21 to -24) . . . . . . . . . . . . . . . . . . . . . . . . . . . . NType L (available with -14, -15, -16, -25, -26). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L
Type L Lens Per High Pressure Standard (available with -17) . . . . . . . . . . . . . . . . . . . . . HType RF (available with -31 to -45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RType RJF Ring (available with -31 to -45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JSmooth Finish (RA 125 m) up to Class 600. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
MaterialCarbon Steel (A-105) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K1.4571 (316 Ti) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SHastelloy C (b) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C
OptionsVent Plug G 3/4 (DIN) (available with Material Code K & S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -GVent Plug NPT 3/4 (ANSI) (available with Material Code K & S). . . . . . . . . . . . . . . . . . . . . . . . . . . -NShort Bolts For Flange Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -FBolts & Nuts For Product Temperature Below -10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -A
Oxygen Service Cleaned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -OTag No. Labeling
Stamped with weather resistant color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -SStainless Steel Label fixed with wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -L
Certificates
EN 10204-2.1 Cert if icate Of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1EN 10204-3.1 Inspection Certificate Of Process Wetted Material . . . . . . . . . . . . . . . . . . . . . . . . . . -3Comply With NACE Standard MR-01-75 . . . (c) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -6
(a) Type C Raised Face (Rz 40-160) per DIN 2526, Type E Raised Face (Rz 16) per DIN 2526Type F Tongue per DIN 2512, Type N Groove per DIN 2512Type L Lens per DIN 2696, Type RF Raised Face per ANSI B16.5
Type RJF Ring Joint Face per ANSI B16.5(b) Available with -11, to -13, -22 to -24, -31 to -33, -41 to -42.Flanges 1.4571 plated with special materials; available with Contact Face C, E & R
(c) On request
-
7/27/2019 104xx_1PSS_A_001_en
15/22
2
1
3
4
2
1
3
4
104.. 15PSS EML0900A-(en)FLANGE COMBINATION 104FK
The flange combination is used, if
- displacer chamber with Side-Top (-ST) or Top-Bottom(-TB) design is applied to a torque tube transmitter
Model 134LD or 167LP
- a transmitter is mounted on a DN 50 (2 inch) or DN 150(6 inch) flange connection 1)
- the cover flange is to be taken off for service withoutremoving the transmitter. 2)
The flange combination will be supplied with gaskets, boltsand nuts for connection to the transmitter.
Flange combination104FK
1) for connection of a transmitter with torque tube,the cover flange kit 104 CF is additionally necessary
2) blanking flange 104 BF is additionally necesssary3) depending on basic material
MaterialsFlange combination . . . . . . . WNr. 1.0460 (A-105)
WNr. 1.4571 (316Ti)Gaskets,spiral sealings 3). . . . . . . . . . Carbon steel / Graphite
WNr. 1.4404 / GraphiteBolts . . . . . . . . . . . . . . . . . . . . .21CrMo V 57 or A2 4)
Nuts. . . . . . . . . . . . . . . . . . . 24CrMo 5 or A2
MountingFlange size #1 . . . . . . . . . . . DN 80 / DN 100 / DN 150
3 inch / 4 inch / 6 inchFlange size #2 . . . . . . . . . . . DN 15 / 20 / 25 / 50 / 80
/ / 1 / 2 / 3 inchStatic pressure rating 5) . . . . PN16/40/63/100/160/250
Class150/300/600/900/1500Contact face
acc. to DIN 2526. . . . . . . Type C, smooth(Rz =40-160m)Type E, smooth Rz =16 m
DIN 2521 . . . . . . . . . . . . Type N, grooveType F, tongue
DIN 2696 . . . . . . . . . . . . Type L, lens 6)
acc. to ANSI B16.5 . . . . . Type RF, smoothType RJF, ring joint faceAARH, smooth finish(Ra=125 inch)
1 Flange size #12 Flange size #23 Gaskets4 Bolts and nuts
4) bolts and nuts of A2 (WNr. 1.4541) for temperatures below -10C5) nominal size flange #1 DN 100 / 4 inch to PN 40 / Class 300 only6) for nominal pressure PN 160 and 250 only
for flange mounting
e.g. top mounting on chambers or vesselswith 6 inch / DN 150 dimension
for sandwich mounting
on e.g. Top-Bottom or Top-Side chambers
-
7/27/2019 104xx_1PSS_A_001_en
16/22
#2
#1
h
# 2
# 1
D
16 104.. PSS EML0900A-(en)Dimensions
For sandwich mounting
Table of Dimensions and weightsfor Flange combination 104FK according to DIN
Nominal size #2 Nominal size #1DN 80 DN 100
DN PN
[bar]
h
[mm]
Weight
[kg]
h
[mm]
Weight
[kg]
15
164063
100160250
-122133137141166
-8.0
12.016.017.027.0
118122135141145174
8.012.017.022.523.538.0
201640
-124
-8.5
120124
8.512.5
25
164063
100
160250
-124146150
154171
-8.5
13.018.0
18.028.0
120124148154
158179
8.512.518.024.5
24.539.0
50
164063
100160250
-132150160171191
-11.016.021.023.033.0
128132150164175199
11.015.021.027.529.544.0
80
164063
100160
250
-144176192221
263
-11.016.522.523.5
38.0
128158
---
-
10.016.0
---
-
1001640
--
--
128158
10.016.0
For flange mounting
Table of dimensions and weightsfor Flange combination 104FK according to ANSI
Nom.size #2 Nominal size #13 inch 4 inch
DN PN h [mm] Weight
[kg]
h [mm] Weight
[kg]Class RF RJF RF RJF
1/2
150300600900
1500
132141157171181
-155159173182
6.512.014.022.025.0
132144163178187
-158165179188
11.017.024.039.036.0
3/4
150300600900
1500
137146162181190
-160163182192
6.513.015.022.025.0
137149168187196
-163169188198
11.018.025.039.036.0
1
150300
600900
1500
140151
167184194
153165
168186195
7.013.0
15.024.027.0
140154
173190200
153168
174192201
11.518.0
25.041.038.0
2
150300600900
1500
148159178223232
161175181226235
9.016.019.032.035.0
148162184229238
161178187232241
13.521.029.049.046.0
3
150300600900
1500
116131150172193
128146143175197
-----
249268
---
-----
16.023.0
---
4150300
--
--
--
128142
14.025.0
14.025.0
DN 150 / 6 inch flange connection version
Nominalsize #2
PN [bar]Class
Nominal size #1DN 150 6 inch
h[mm]
Weight[kg]
h[mm]
Weight[kg]
DN 8016 253 2040 273 24
3 inch Class 150 299 20Class 300 319 30
-
7/27/2019 104xx_1PSS_A_001_en
17/22
104.. 17PSS EML0900A-(en)MODEL CODES 104FKFlange Combination Kit (incl. Gaskets, Nuts and Bolts) 104FK ........
Flange Size 1 & Pressure RatingDN80 PN 16/40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -11DN80 PN 63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -12
DN80 PN 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -13DN80 PN 160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -14DN80 PN 250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15DN100 P N 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 21DN100 P N 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 22DN100 P N 63 . . . . . . . . . . . . . . . . . (a) . . . . . . . . . . . . -23DN100 P N 100 . . . . . . . . . . . . . . . . ( a) . . . . . . . . . . . . -24DN100 P N 160 . . . . . . . . . . . . . . . . ( a) . . . . . . . . . . . . -25DN100 P N 250 . . . . . . . . . . . . . . . . ( a) . . . . . . . . . . . . -26DN150 P N 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 27DN150 P N 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 283 Inch ANSI Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . -313 Inch ANSI Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . -32
3 Inch ANSI Class 600 . . . . . . . . . . . . . . . . . . . . . . . . . . -333 Inch ANSI Class 900 . . . . . . . . . . . . . . . . . . . . . . . . . . -343 Inch ANSI Class 1500 . . . . . . . . . . . . . . . . . . . . . . . . . -354 Inch ANSI Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . -414 Inch ANSI Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . -424 Inch ANSI Class 600 . . . . . . . . . . . . (a) . . . . . . . . . . . . -434 Inch ANSI Class 900 . . . . . . . . . . . . (a) . . . . . . . . . . . . -444 Inch ANSI Class 1500 . . . . . . . . . . . (a) . . . . . . . . . . . . -456 Inch ANSI Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . -476 Inch ANSI Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . -48
Flange Size 2DN15 (available with -11 to -26) . . . . . . . . . . . . . . . . . . . . . . . ADN20 (available with -11, -21, -22) . . . . . . . . . . . . . . . . . . . . . . BDN25 (available with -11 to -26) . . . . . . . . . . . . . . . . . . . . . . . C
DN50 (available with -11 to -26) . . . . . . . . . . . . . . . . . . . . . . . DDN80 (available with -11 to -15 & -21, -22, -27, -28) . . . . . . . . . . . . . K1/2 inch (available with -31 to -45) . . . . . . . . . . . . . . . . . . . . . . . E3/4 inch (available with -31 to -45) . . . . . . . . . . . . . . . . . . . . . . . F1 inch (available with -31 to -45) . . . . . . . . . . . . . . . . . . . . . . . G2 inch (available with -31 to -45) . . . . . . . . . . . . . . . . . . . . . . . H3 inch (available with -31 to -35 & -41, -42, -47, -48) . . . . . . . . . . . . . L
Contact Face (b)Type C (available with -11, -21, -22, -27, -28) . . . . . . . . . . . . . . . . . . . . . CType E (available with -12, -13, -23, -24) . . . . . . . . . . . . . . . . . . . . . . . EType F (available with -11 to -13, -21 to -24 & -27, -28) . . . . . . . . . . . . . . . FType N (available with -11 to -13 & -21 to -24 & -27, -28) . . . . . . . . . . . . . . . NType L (available with -14, -15, -25, -26) . . . . . . . . . . . . . . . . . . . . . . . L
Type RF (available with -31 to -48) . . . . . . . . . . . . . . . . . . . . . . . . . . . RType RJF (available with -31 to -48) . . . . . . . . . . . . . . . . . . . . . . . . . . . JSmooth finish; (RA mm) up to Class 600 . . . . . . . . . . . . . . . . . . . . . . . . . S
MaterialCarbon Steel 1.0460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K1.4571 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
Gaskets (for Flange Size 1)1 Gasket for Flange Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F2 Gaskets for Sandwich Mounting (144LD, 244LD, 167LP). . . . . . . . . . . . . . . . . . . . . . . S
BoltsFor Flange Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FFor Sandwich Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
(continued on next page)
-
7/27/2019 104xx_1PSS_A_001_en
18/22
18 104.. PSS EML0900A-(en)MODEL CODES 104FK (continued)
OptionsBolts & Nuts for product Temperature below -10 C (Material 1.4541) . . . . . . . . . . . . . . . . . . . . . . . . -AOxygen Service cleaned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - O
Tag. No. LabelingStamped with weather resistant color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -SStainless steel label fixed with wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -L
Certificates
EN 10204-2.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1EN 10204-3.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -3PED 97/23/EC additional unit verification, according to module F/G . . . . . . . . . . . . . . . . . . . . . . . . . -4Comply with NACE standard MR-01-75 (a). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -6
Material Test
X-Ray and Isotope test for weldings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -7Dye penetrate test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -8
(a) On request(b) Type C raised face (Rz 40-160) per DIN 2526
Type E Raised Face (Rz 16) per DIN 2526Type N Groove per DIN 2512Type RF raised face per ANSI B 16.5Type RJF ring joint face per ANSI B16.5Type L lens per DIN 2696
-
7/27/2019 104xx_1PSS_A_001_en
19/22
104.. 19PSS EML0900A-(en)BLANKING FLANGE KIT 104BF
This flange kit is required to close both the drain flange andthe top mounted flange combination, if no other additionallyequipment is connected.
MaterialsFlange . . . . . . . . . . . . . . . . . 1.0460
1.4571
Gaskets,spiral sealings 1). . . . . . . . . . Carbon steel / Graphite
1.4404 / GraphiteGraphite: for tongue or grooveLens: steel or 1.4404Sealings RJF: steel or 1.4404
Bolts . . . . . . . . . . . . . . . . . . 21CrMo V 57 or A2 2)
Nuts. . . . . . . . . . . . . . . . . . . 24CrMo 5 or A2
MountingNominal size . . . . . . . . . . . . DN 15 / 20 / 25 / 50
1/2 / 3/4 / 1 / 2 inchStatic pressure rating . . . . . . PN 16/ 40/ 63/100/160/250
Class150/300/600/900/1500
1) depending on basic material2) bolts and nuts of A2 (WNr. 1.4541) for temperatures below -10C3) for nominal pressure PN 160 and 250 only
Contact faceacc. to DIN 2526. . . . . . . Type C, smooth
Rz =40-160mType E, smooth Rz =16m
DIN 2521 . . . . . . . . . . . . Type N, grooveType F, tongueDIN 2696 . . . . . . . . . . . . Type L, lens 3)
acc. to ANSI B16.5 . . . . . Type RF, raised faceType RJF, ring joint faceAARH, smooth finish
(Ra=125 inch)
-
7/27/2019 104xx_1PSS_A_001_en
20/22
20 104.. PSS EML0900A-(en)Dimensions and weights for flangesaccording to DIN; 104CF, 104BF
ScrewsDN PN D K b
Numb
er
Threa
d
Weig
ht
Standa
rds
mm bar mm mm mm kg
15
16 / 4063/100
95105
6575
1620
44
M12M12
1.52.0
DIN 2527Form E, F
160250
105130
7590
2026
44
M12M16
2.03.5
DIN 2628Form L
20 16/40 105 75 18 4 M12 2.0DIN 2527Form E, F
25
16 / 4063/100
115140
85100
1824
44
M12M16
3.03.5
DIN 2527Form E, F
160250 140150 100105 2428 44 M16M20 3.55.0 DIN 2628Form L
50
16 / 4063
100
165180195
125135145
202628
444
M16M20M24
4.06.08.0
DIN 2527Form E, F
160250
195200
145150
3038
48
M24M24
8.512.0
DIN 2628Form L
80
16 / 4063
100
200215230
160170180
242832
888
M16M20M24
7.010.514.5
DIN 2527Form E, F
160250
230255
180200
3646
88
M24M27
15.524.0
DIN 2628Form L
100
16
4063
100
220
235250265
180
190200210
20
243036
8
888
M16
M20M24M27
7.0
11.015.521.0
DIN 2527
Form E, F
160250
265300
210235
4054
88
M27M30
22.035.0
DIN 2628Form L
Flanges dimensions according to DIN
and ANSI
Dimensions and weights for flangesaccording to ANSI; 104CF, 104BF
ScrewsDN PN D K b
Numb
er
Threa
d
Weig
ht
Standa
rds
inch Class mm mm mm kg
1/2
150300600
900*)1500
899595
-121
606767
-83
111421
-29
444-4
M12M12M12
-M16
1.52.02.0
-3.5
AN
SIB16
.5;
Form
RF
,Form
RJF
3/4
150300600900
1500
99117117
-
130
708383
-
89
131622
-
31
444-
4
M12M16M16
-
M20
33.53.5
-
5.0
1
150300600
900*)1500
108124124
-149
798989
-102
141824
-35
444-4
M16M20M24
-M24
4.06.08.0
-12.0
2
150300600
900*)1500
152165165
-216
121127127
-165
192232
-44
448-8
M16M16M16
-M24
3.05.56.0
-16.0
3
150300600900
1500
190210210241267
152168168190203
2428384454
88888
M16M20M24M24M30
7.010.514.515.524.0
4
150300600900
1500
229254273292312
190200216235241
2432445160
88888
M16M20M24M27M30
7.011.015.521.535.0
*) use Class 1500 flanges
K
D
b
-
7/27/2019 104xx_1PSS_A_001_en
21/22
104.. 21PSS EML0900A-(en)MODEL CODES 104BFBlanking Flange Kit (Flange, Gasket, Nuts and Bolts) 104BF .......
Flange SizeDN15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -11DN20 (available with Pressure Rating A only) . . . . . . . . . . . . . . . . . . . . . . -12
DN25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -13DN50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -141/2 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -213/4 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -221 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -232 inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -24
Pressure RatingPN 40 (with Flange size -11 to -14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . APN 63 (with Flange size -11, -13, -14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BPN 100 (with Flange size -11, -13, -14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CPN 160 (with Flange size -11, -13, -14) . . . . (c) . . . . . . . . . . . . . . . . . . . . . . . DPN 150 (with Flange size -11, -13, -14) . . . . (c). . . . . . . . . . . . . . . . . . . . . . . . EClass 150 (with Flange size -21 to -24) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F
Class 300 (with Flange size -21 to -24) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GClass 600 (with Flange size -21 to -24) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HClass 900 (with Flange size -21 to -24) . . . . (c). . . . . . . . . . . . . . . . . . . . . . . . IClass 1500 (with Flange size -21 to -24) . . . (c). . . . . . . . . . . . . . . . . . . . . . . . K
Contact Face (a)Type C (available with Pressure Rating A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CType E (available with Pressure Rating B, C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EType F (available with Pressure Rating A to C). . . . . . . . . . . . . . . . . . . . . . . . . . . . . FType N (available with Pressure Rating A to C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . NType L (available with Pressure Rating D, E). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LType RF (available with Pressure Rating F to K). . . . . . . . . . . . . . . . . . . . . . . . . . . . RType RJF Ring (available with Pressure Rating F to K) . . . . . . . . . . . . . . . . . . . . . . . . JSmooth Finish (RA 125 m) up to Class 600. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
MaterialCarbon Steel (C22.8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K1.4571 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S
OptionsBolts & Nuts For Product Temperature Below -10 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -AOxygen Service Cleaned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -OTag No. Labeling Stamped with weather resistant color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -STag No. Labeling Stainless steel label fixed with wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -L
Certificates
EN 10204-2.1 Certificate Of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1EN 10204-3.1 Inspection Certificate Of Process Wetted Material . . . . . . . . . . . . . . . . . . . . . . . . . . -3Comply With NACE Standard MR-01-75 . . . (b) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -6
(a) Type C Raised Face (Rz 40-160) per DIN 2526, Type E Raised Face (Rz 16) per DIN 2526,Type F Tongue per DIN 2512, Type N Groove per DIN 2512, Type L Lens per DIN 2696,Type RF Raised Face per ANSI B16.5, Type RJF Ring Joint Face per ANSI B16.5
(b) On request(c) Material S on request
-
7/27/2019 104xx_1PSS_A_001_en
22/22
22 104.. PSS EML0900A-(en)
Subject to alterations - reprinting, copying and translation prohibited. Products and publications are normally quo-ted here without reference to existing patents, registered utility models or trademarks. The lack of any such refe-rence does not justify the assumption that a product or symbol is free.
FOXBORO ECKARDT GmbHPostfach 50 03 47D-70333 StuttgartTel. # 49(0)711 502-0Fax # 49(0)711 502-597http://www.foxboro-eckardt.com DOKT 556 714 028